SEARCH · Engineering Papers

Results for “statistical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Simulation and Modeling of Hypersonic Turbulent Boundary Layers Subject to Favorable Pressure Gradients due to Streamline Curvature

Direct numerical simulations (DNS) of favorable-pressure-gradient turbulent boundary layers are presented for a nominal freestream Mach number of 5, with the objective of assessing the limitations of the currently available Reynolds-averaged Navier-Stokes (RANS) models.The wall geometry and flow conditions of the DNS are representative of the experimental data for a Mach 4.9 turbulent boundary layer that was tested on a two-dimensional planar convexwall model in the high-speed blow-down wind tunnel located at the National Aerothermochemistry Laboratory at Texas A&M University. The favorable pressure gradient is induced bythe streamwise surface curvature. The DNS results will be compared with experimental measurements and RANS computations for the same flow conditions and wall geometry. The DNS datasets will also be analyzed to provide an improved physical understanding of hypersonic boundary-layer turbulence subject to mechanical nonequilibrium, including the validity of Morkovin’s hypothesis and the various available compressibility transformations, as well as to obtain turbulence statistics that are relevant to RANS modeling, including the distribution ofeddy viscosity, the budgets of turbulent kinetic energy and Reynolds stresses, and the velocity-temperature correlations. The RANS predictions will be obtained by using both the commonly used one- and two-equation models that assume a constant turbulent Prandtl number and an algebraic, variable Prandtl number model for the turbulent energy flux.

turbulent boundary layers↗

NASA NTRS2008

Algorithms for Spectral Decomposition with Applications to Optical Plume Anomaly Detection

The analysis of spectral signals for features that represent physical phenomenon is ubiquitous in the science and engineering communities. There are two main approaches that can be taken to extract relevant features from these high-dimensional data streams. The first set of approaches relies on extracting features using a physics-based paradigm where the underlying physical mechanism that generates the spectra is used to infer the most important features in the data stream. We focus on a complementary methodology that uses a data-driven technique that is informed by the underlying physics but also has the ability to adapt to unmodeled system attributes and dynamics. We discuss the following four algorithms: Spectral Decomposition Algorithm (SDA), Non-Negative Matrix Factorization (NMF), Independent Component Analysis (ICA) and Principal Components Analysis (PCA) and compare their performance on a spectral emulator which we use to generate artificial data with known statistical properties. This spectral emulator mimics the real-world phenomena arising from the plume of the space shuttle main engine and can be used to validate the results that arise from various spectral decomposition algorithms and is very useful for situations where real-world systems have very low probabilities of fault or failure. Our results indicate that methods like SDA and NMF provide a straightforward way of incorporating prior physical knowledge while NMF with a tuning mechanism can give superior performance on some tests. We demonstrate these algorithms to detect potential system-health issues on data from a spectral emulator with tunable health parameters.

Srivastava, Askok N.↗

NASA NTRS2001

Fluid Physics Under a Stochastic Acceleration Field

The research summarized in this report has involved a combined theoretical and computational study of fluid flow that results from the random acceleration environment present onboard space orbiters, also known as g-jitter. We have focused on a statistical description of the observed g-jitter, on the flows that such an acceleration field can induce in a number of experimental configurations of interest, and on extending previously developed methodology to boundary layer flows. Narrow band noise has been shown to describe many of the features of acceleration data collected during space missions. The scale of baroclinically induced flows when the driving acceleration is random is not given by the Rayleigh number. Spatially uniform g-jitter induces additional hydrodynamic forces among suspended particles in incompressible fluids. Stochastic modulation of the control parameter shifts the location of the onset of an oscillatory instability. Random vibration of solid boundaries leads to separation of boundary layers. Steady streaming ahead of a modulated solid-melt interface enhances solute transport, and modifies the stability boundaries of a planar front.

Vinals, Jorge↗

NASA NTRS1981

Observations of solar filaments at 8, 15, 22 and 43 GHz

Radio depressions frequently appear broader than their associated H-alpha filaments and often persist after a filament disappears. The reported study is concerned with the relative contributions of filament and the filament channel to the depth of radio depressions. Although the contribution cannot readily be determined in an individual case, the apportionment can be assessed statistically by extensive multi-frequency observations of many filaments and channels using the same telescope over a period of days. In principle it is possible to determine the evolution, geometry, and physical properties of filaments and filament channels with a widely based set of radio observations. It is found that all but a few percent of the microwave depressions lie on magnetic neutral lines or their natural extensions. The only possible exceptions are coronal holes on the disk, which are small or non-existent during the period of the conducted observations. The diversity of microwave filaments is striking. Even quiescent filaments show considerable variation.

Schmahl, E. J.↗

NASA NTRS1993

An engineering model of woven composites based on micromechanics

Composites with three-dimensional woven architectures exhibit large strains to failure when compared to composites made up of the same materials but not with three-dimensional interlocking tows. The fracture mechanics of such three-dimensional architectures is a subject requiring substantial investigation and experimental testing. Classical fracture mechanics concepts (for instance, an isolated defect in a homogeneous body) will not be applicable to the woven fracture test specimen. The use of an isolated singularity to characterize an entire specimen is inadequate when the density of defects is considerable and the material is heterogeneous. Modelling of such a complex system requires a great deal of insight and consideration as well as prudent choices of model sizes to make numerical schemes feasible. The purpose of this manuscript is to review our recently acquired knowledge of damage accumulation in woven composites and to describe a practicable model of the macroscopic behavior in these and other complex composite architectures based on such knowledge. In this manuscript, discussion will be limited to uniaxial compressive loading; considerations of general loading (monotonic and cyclic) will appear in a subsequent manuscript. Our modelling efforts may be briefly described as follows: the composite is subdivided into microstructural elements (microelements) in which the micromechanical modelling is either understood rigorously or can be represented adequately by statistical parameters. There can be microstructural elements for many different types of composite components, such as the various types of warp and weft and matrix for three-dimensional woven composites. The physical dimensions of microelements are made as large as possible while the response within the element can still be represented by a single micromechatlical calculation. The various elements are linked together(sometimes by associating distinct corners and edges, sometimes by superposition) in a pattern which resembles a particular weave architecture. The model can then be loaded in any manner and the linear and nonlinear elastic responses of representative weaves can be calculated. After the elastic regime, the fracture response is determined by monitoring the damage accumulation.

Carter, W. C.↗

NASA NTRS1996

Quantum Cohesion Oscillation of Electron Ground State in Low Temperature Laser Plasma

The development of radically new technological and economically efficient methods for obtaining chemical products and for producing new materials with specific properties requires the study of physical and chemical processes proceeding at temperature of 10(exp 3) to 10(exp 4) K, temperature range of low temperature plasma. In our paper, by means of Wigner matrix of quantum statistical theory, a formula is derived for the energy of quantum coherent oscillation of electron ground state in laser plasma at low temperature. The collective behavior would be important in ion and ion-molecule reactions.

Zhao, Qingxun↗

NASA NTRS2007

Utility of AIRS Retrievals for Climate Studies

Satellites provide an ideal platform to study the Earth-atmosphere system on practically all spatial and temporal scales. Thus, one may expect that their rapidly growing datasets could provide crucial insights not only for short-term weather processes/predictions but into ongoing and future climate change processes as well. Though Earth-observing satellites have been around for decades, extracting climatically reliable information from their widely varying datasets faces rather formidable challenges. AIRS/AMSU is a state of the art infrared/microwave sounding system that was launched on the EOS Aqua platform on May 4, 2002, and has been providing operational quality measurements since September 2002. In addition to temperature and atmospheric constituent profiles, outgoing longwave radiation and basic cloud parameters are also derived from the AIRS/AMSU observations. However, so far the AIRS products have not been rigorously evaluated and/or validated on a large scale. Here we present preliminary assessments of monthly and 8-day mean AIRS "Version 4.0" retrieved products (available to the public through the DAAC at NASA/GSFC) to assess their utility for climate studies. First we present "consistency checks" by evaluating the time series of means, and "anomalies" (relative to the first 4 full years' worth of AIRS "climate statistics") of several climatically important retrieved parameters. Finally, we also present preliminary results regarding interrelationships of some of these geophysical variables, to assess to what extent they are consistent with the known physics of climate variability/change. In particular, we find at least one observed relationship which contradicts current general circulation climate (GCM) model results: the global water vapor climate feedback which is expected to be strongly positive is deduced to be slightly negative (shades of the "Lindzen effect"?). Though the current AIRS climatology covers only -4.5 years, it will hopefully extend much further into the future.

Molnar, Guyla I.↗

NASA NTRS2023

A Hybrid Transfer Function Procedure for Broadband Auralization Within Small Flight Vehicle Interiors

Auralization of the sound fields within flight vehicle interiors is of interest to aircraft designers considering crew and passenger ride quality. Computer models can be used to predict the filtering effects that the fuselage structure and interior volume have on the exterior sound field in order to simulate the resulting cabin interior noise. However, this can become expensive when a wide frequency range of analysis suitable for passenger auralization is desired. This is particularly the case when using deterministic modeling methods such as finite element analysis (FEA) wherein prohibitively high levels of detail and finite element discretizations are required to resolve the wavelengths at high frequencies. On the contrary, Statistical Energy Analysis (SEA), while not capturing important modal behaviors at low frequencies, is better suited for higher frequency analyses where structural and interior dynamics exhibit high modal overlap and spatially averaged physical quantities suffice. For this reason, a hybrid procedure is considered here that utilizes FE modal solutions at lower frequencies and SEA results at higher frequencies. A transfer function dataset containing the exterior to interior vibroacoustic filtering effect is calculated accordingly and subsequently stored to be used for a variety of exterior dynamic load cases. At low frequencies, the transfer function dataset detail is related to the level of FE model refinement whereas at high frequencies it functions as an equalizer array with a level of detail corresponding to the SEA subsystem partitioning scheme. The above procedure is described herein and demonstrated on a six passenger flight vehicle with eight propulsors in a hover flight condition.

auralization↗

NASA NTRS2023

A Hybrid Transfer Function Procedure for Broadband Auralization Within Small Flight Vehicle Interiors

auralization↗

NASA NTRS1981

A statistical analysis of simulated data from potential stratospheric satellite missions

A simplified one-dimensional model is used to analyze simulated data from typical proposed satellite measurements of trace species in the stratosphere. Uncertainties are introduced in simulated species concentration measurements and applied to the basic physical and chemical model data. The results of the calculations are then used to predict uncertainties in the species concentrations computed by the model. Candidate satellite missions can be evaluated for net information acquired by applying the error analysis. An abbreviated depiction of the computational procedure is given, and sample histograms based on an accumulation of 200 calculations are shown for H2O2 and ClNO3, demonstrating that emergent species distributions are roughly Gaussian in the logarithm of number density. Calculated vertical concentration profiles for these two species are presented.

Nealy, J. E.↗

NASA NTRS2023

Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies

Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counterintuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, α = 2 as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed >600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: preflare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that α = 1.63 ± 0.03. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.

Astrostatistics distributions↗

NASA NTRS1977

A qualitative assessment of a random process proposed as an atmospheric turbulence model

A random process is formed by the product of two Gaussian processes and the sum of that product with a third Gaussian process. The resulting total random process is interpreted as the sum of an amplitude modulated process and a slowly varying, random mean value. The properties of the process are examined, including an interpretation of the process in terms of the physical structure of atmospheric motions. The inclusion of the mean value variation gives an improved representation of the properties of atmospheric motions, since the resulting process can account for the differences in the statistical properties of atmospheric velocity components and their gradients. The application of the process to atmospheric turbulence problems, including the response of aircraft dynamic systems, is examined. The effects of the mean value variation upon aircraft loads are small in most cases, but can be important in the measurement and interpretation of atmospheric turbulence data.

Sidwell, K.↗

NASA NTRS1989

Groups of galaxies in the Center for Astrophysics redshift survey

By applying the Huchra and Geller (1982) objective group identification algorithm to the Center for Astrophysics' redshift survey, a catalog of 128 groups with three or more members is extracted, and 92 of these are used as a statistical sample. A comparison of the distribution of group centers with the distribution of all galaxies in the survey indicates qualitatively that groups trace the large-scale structure of the region. The physical properties of groups may be related to the details of large-scale structure, and it is concluded that differences among group catalogs may be due to the properties of large-scale structures and their location relative to the survey limits.

Ramella, Massimo↗

NASA NTRS1993

Application of the target decomposition theorem to a polarimetric random media model

With advances in polarimetric radar measurements of land surfaces, the need for understanding the underlying scattering mechanisms and dominant target features has become the focus of many studies. In particular, the maximum use of the polarimetric information to identify and/or separate parameters related to the surface features such as vegetation thickness, structure, water content, and soil surface characteristics will enhance the possibility of using polarimetric radars for monitoring the earth's surface from space. In this paper, Cloude's decomposition theorem is applied to a polarimetric random media model to simulate the radar measurements of vegetated canopies. The vegetated canopies are modeled as a three layer discrete random medium with leaves and branches in the first layer, tree trunks in the second layer, and a half space of homogeneous ground with rough interface as the bottom layer. The distorted born approximation (DBA) has been used to compute full Mueller matrix of the canopy, using canonical dielectric objects such as thin discs and cylinders as leaves, branches, and trunks, respectively. The Mueller matrix and the derived covariance matrix contain information on the second order statistics of radar signals at various polarizations from the canopy. To decompose the covariance matrix to its constituent targets, the eigenvalues and eigenvectors of the covariance matrix are computed in terms of the physical parameters of the canopy. In addition, each eigenvector explicitly shows the scattering mechanisms such as odd and even reflections in the canopy. Cloude's decomposition theorem is applied using the Pauli spin matrices as a basis and an expression for the degree of disorder or the entropy for the vegetated surface is found. Then, the physical parameters estimated from in situ measurements are used in the random media to obtain realistic covariance matrices. As a result, the sensitivity of the eigenvalue spectrums and the coefficients resulting from the target decomposition theorem to the physical parameters of the canopy are examined and the possible use of Cloude's theorem to estimate vegetation and soil parameters is discussed.

Saatchi, Sasan S.↗

NASA NTRS2005

Remote Sensing of Evapotranspiration and Carbon Uptake at Harvard Forest

A land surface vegetation index, defined as the difference of microwave land surface emissivity at 19 and 37 GHz, was calculated for a heavily forested area in north central Massachusetts. The microwave emissivity difference vegetation index (EDVI) was estimated from satellite SSM/I measurements at the defined wavelengths and used to estimate land surface turbulent fluxes. Narrowband visible and infrared measurements and broadband solar radiation observations were used in the EDVI retrievals and turbulent flux estimations. The EDVI values represent physical properties of crown vegetation such as vegetation water content of crown canopies. The collocated land surface turbulent and radiative fluxes were empirically linked together by the EDVI values. The EDVI values are statistically sensitive to evapotranspiration fractions (EF) with a correlation coefficient (R) greater than 0.79 under all-sky conditions. For clear skies, EDVI estimates exhibit a stronger relationship with EF than normalized difference vegetation index (NDVI). Furthermore, the products of EDVI and input energy (solar and photosynthetically-active radiation) are statistically significantly correlated to evapotranspiration (R=0.95) and CO2 uptake flux (R=0.74), respectively.

Min, Qilong↗

NASA NTRSDate not supplied

Parameterization of Vertical Cloud Distribution from C3M and MERRA Data Using ML Method

Clouds play a key role in regulating the hydrological cycle and the Earth's radiative energy budget. However, global climate models (GCMs) with a horizontal grid spacing on the order of 100 km have limitations in representing sub-grid cloud dynamics with spatial scales on the order of 1 km, leading to potential uncertainties in cloud radiative feedback on the global scale. In our research, we will leverage the capabilities of Deep Machine Learning (DML) methods to construct parameterizations of sub-grid volumetric cloud fraction (VCF), which is the frequency of occurrence on a grid volume accumulated in the horizontal and vertical directions. Our investigation delves into the intricate relationship between VCF obtained from the NASA CALIPSO-CloudSat-CERES-MODIS (CCCM) satellite observation data and 3-D MERRA-2 reanalysis meteorological profiling data (e.g., wind, relative humidity, temperature). Through a comprehensive one-year data training utilizing the Sequence to Sequence DML method, we have successfully disentangled the complicated cloud formation dynamics across diverse meteorological conditions through a day-to-day analysis framework. Preliminary findings reveal promising statistical agreements in geographical and vertical distributions and seasonal variations of volumetric cloud fraction between ML prediction and satellite measurements. These results underscore the aptitude of our DML model to discern underlying cloud physical processes and accurately represent sub-grid cloud formation dynamics. Additionally, we have also employed trained neural network to analyze uncertainties arising from errors in meteorological data, further enhancing the robustness of our VCF parameterization.

Shan Zeng↗

NASA NTRS1978

Limb-darkening and the structure of the Jovian atmosphere

By observing the transit of various cloud features across the Jovian disk, limb-darkening curves were constructed for three regions in the 4.6 to 5.1 mu cm band. Several models currently employed in describing the radiative or dynamical properties of planetary atmospheres are here examined to understand their implications for limb-darkening. The statistical problem of fitting these models to the observed data is reviewed and methods for applying multiple regression analysis are discussed. Analysis of variance techniques are introduced to test the viability of a given physical process as a cause of the observed limb-darkening.

Newman, W. I.↗

NASA NTRS1977

Data simulation studies for field programs, satellite system tests, and regional weather prediction

In the present paper, the status of the Drexel/NCAR regional numerical weather forecast system is summarized to show the extent of our experience and our immediate requirements for data within the United States on scales smaller than rawinsonde spacing (approximately 300 km). Preliminary experiments are described, and data assimilation problems are examined. It is shown that data requirements, assimilation methods, and forecast sensitivity differ for regional and large-scale models. Forecast verification statistics suggest that middle-troposphere temperature is well known but relative humidity is not. In some cases, regional forecasts require much better humidity data than available from rawinsondes. Numerics, lateral boundary conditions, model physics, and computing power are adequate for near real-time experimental regional prediction with horizontal mesh sizes down to 35 km. Subsynoptic data and assimilation are the primary challenges facing regional NWP.

Kreitzberg, C. W.↗