SEARCH · Engineering Papers

Results for “spatial accelerator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Analysis of the Amplitude Response of a Two-Point and a Two-Line/Multi-Point Focused Laser Differential Interferometer

Experiments were performed with two different focused laser differential interferometer (FLDI) instruments to assess the amplitude response of each instrument to a traveling shock-wave generated by a laser spark. The first FLDI instrument generated two measurement points, with each measurement point providing sensitivity to density fluctuations induced by the shockwave. By performing a cross-correlation between the signals obtained from each measurement point, the phase velocity of density fluctuations can be obtained. The second FLDI instrument generated two measurement lines that are oriented either parallel or orthogonal to the shockwave direction of travel with the resulting interference pattern sampled at multiple equally-spaced points along each line. As a result, this instrument provides density fluctuation measurement capability at multiple points simultaneously. When the measurement lines are oriented parallel to the shockwave direction of travel, the phase velocity, rate of change of the phase velocity, and acceleration of density fluctuations traveling along each line can be obtained by performing a cross-correlation between points along a single line. When the measurement lines are oriented orthogonal to the shockwave direction of travel, the spatially-varying phase velocity can be obtained by performing a cross-correlation between points at the same relative location on each measurement line. Computations of the shockwave generated by the laser spark are used to simulate the response of each instrument and are compared to the experimental results. High-speed Schlieren imaging has also been performed and is compared with the FLDI measurements and computational results.

Focused Laser Differential Interferometer↗

DOE OSTI2024

Efficient backward x-ray emission in a finite-length plasma irradiated by a laser pulse of picosecond duration

Motivated by experiments employing picosecond-long, kilojoule laser pulses, we examined x-ray emission in a finite-length underdense plasma irradiated by such a pulse using two-dimensional particle-in-cell simulations. We found that, in addition to the expected forward emission, the plasma also efficiently emits in the backward direction. Our simulations reveal that the backward emission occurs when the laser exits the plasma. The longitudinal plasma electric field generated by the laser at the density down-ramp turns around some of the laser-accelerated electrons and re-accelerates them in the backward direction. As the electrons collide with the laser, they emit hard x rays. The energy conversion efficiency is comparable to that for the forward emission, but the effective source size is smaller. We show that the picosecond laser duration is required for achieving a spatial overlap between the laser and the backward energetic electrons. At peak laser intensity of 1.4×1020 W/cm2, backward-emitted photons (energies above 100 keV and 10° divergence angle) account for 2×10−5 of the incident laser energy. This conversion efficiency is three times higher than that for similarly selected forward-emitted photons. The source size of the backward photons (5 μm) is three times smaller than the source size of the forward photons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2011

Constraint Embedding Technique for Multibody System Dynamics

Multibody dynamics play a critical role in simulation testbeds for space missions. There has been a considerable interest in the development of efficient computational algorithms for solving the dynamics of multibody systems. Mass matrix factorization and inversion techniques and the O(N) class of forward dynamics algorithms developed using a spatial operator algebra stand out as important breakthrough on this front. Techniques such as these provide the efficient algorithms and methods for the application and implementation of such multibody dynamics models. However, these methods are limited only to tree-topology multibody systems. Closed-chain topology systems require different techniques that are not as efficient or as broad as those for tree-topology systems. The closed-chain forward dynamics approach consists of treating the closed-chain topology as a tree-topology system subject to additional closure constraints. The resulting forward dynamics solution consists of: (a) ignoring the closure constraints and using the O(N) algorithm to solve for the free unconstrained accelerations for the system; (b) using the tree-topology solution to compute a correction force to enforce the closure constraints; and (c) correcting the unconstrained accelerations with correction accelerations resulting from the correction forces. This constraint-embedding technique shows how to use direct embedding to eliminate local closure-loops in the system and effectively convert the system back to a tree-topology system. At this point, standard tree-topology techniques can be brought to bear on the problem. The approach uses a spatial operator algebra approach to formulating the equations of motion. The operators are block-partitioned around the local body subgroups to convert them into aggregate bodies. Mass matrix operator factorization and inversion techniques are applied to the reformulated tree-topology system. Thus in essence, the new technique allows conversion of a system with closure-constraints into an equivalent tree-topology system, and thus allows one to take advantage of the host of techniques available to the latter class of systems. This technology is highly suitable for the class of multibody systems where the closure-constraints are local, i.e., where they are confined to small groupings of bodies within the system. Important examples of such local closure-constraints are constraints associated with four-bar linkages, geared motors, differential suspensions, etc. One can eliminate these closure-constraints and convert the system into a tree-topology system by embedding the constraints directly into the system dynamics and effectively replacing the body groupings with virtual aggregate bodies. Once eliminated, one can apply the well-known results and algorithms for tree-topology systems to solve the dynamics of such closed-chain system.

Woo, Simon S.↗

DOE OSTI2021

Visualization, understanding, and mitigation of process-induced-membrane irregularities in gas diffusion electrode-based polymer electrolyte membrane fuel cells

Polymer electrolyte membrane fuel cells (PEMFC) show substantial promise for their application in electric vehicles. For large-scale manufacturing of PEMFCs, roll-to-roll coated gas-diffusion-electrodes (GDE) offer certain advantages over other production pathways. Procedures including hot pressing and coating an ionomer overlayer may be necessary for this manufacturing pathway to enable a suitable catalyst layer/membrane interface. The same procedures may potentially introduce membrane irregularities, especially when thin membranes are used. Limited understanding exists regarding if and to what extent such irregularities impact PEMFC performance and lifetime, and therefore be considered defects. In this study, NREL's customized fuel cell hardware that enables quasi in-situ infrared (IR) thermography studies was utilized to visualize spatial hydrogen crossover and identify membrane irregularities that originated from the GDE-based MEA fabrication process. The structure of these membrane irregularities was investigated by scanning electron microscopy (SEM) and its impact on initial H2/air performance was determined. Accelerated stress testing (AST) revealed that these irregularities develop into failure point locations. These results were validated across many MEAs with identified process-induced membrane irregularities. By selecting specific gas diffusion media properties and by fine tuning the MEA hot pressing parameters, the formation of such membrane irregularities was mitigated.

08 HYDROGEN↗

DOE OSTI2022

A phenology- and trend-based approach for accurate mapping of sea-level driven coastal forest retreat

The rapid replacement of upland forest by encroaching marshland is a striking manifestation of global sea-level rise (SLR). Timely and high-resolution information on the location and extent of transition forest (the ecotone between upland forest and marsh where tree mortality due to seawater intrusion begins) is fundamental to understanding the processes and patterns of SLR-driven landscape reorganization. Despite its significance, accurate characterization of salt-impacted transition forest remains challenging due to the complexity of coastal environments, scarcity of ground-truth data, and the lack of effective mapping algorithms. Here we use the full archive of Landsat images between 1984 and 2021 to investigate the spectral, temporal, and phenological characteristics of transition forest, and develop a robust framework for monitoring coastal vegetation shifts in the mid-Atlantic U.S., a global SLR hotspot. Here, we found that transition forest exhibits strong negative NDVI trends and a deviation of land surface phenology from marsh and upland forest that distinguishes itself from surrounding vegetation. By integrating temporal trends and land surface phenology, our results demonstrate superior discrimination between marsh and coastal forests to existing map products (e.g. NOAA Coastal Change Analysis Program, National Land Cover Database) that allows a reliable identification of the coastal treeline. We applied the approach to map regional land cover in 1985, 2000 and 2020 (overall classification accuracy >92%) and found that the area of coastal forest decreased by 22.0% from 1985 to 2020, the majority of which transitioned to marshland (92.3%, 5.3 × 10 3 ha). Based upon fine-scale patterns of coastal transgression, we created a practical workflow for spatially explicit quantification of forest retreat rates. Concurrent with rising sea level, coastal forests migrated upslope from 0.63 (± 0.27) m above sea level in 1985 to 0.78 (± 0.32) m above sea level in 2020, and horizontal forest retreat rates accelerated from 3.1 (range of 0–36) m yr -1 during 1985–2000 to 4.7 (0–55) m yr -1 during 2001–2020. As SLR continues to accelerate, our study may serve as a scalable solution for consistent tracking of coastal landscape evolution that is urgently needed for sustainable forest and wetland management.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Convective Momentum Transport and Its Impact on the Madden‐Julian Oscillation in E3SM‐MMF

Abstract Convective momentum transport (CMT) is the process of vertical redistribution of horizontal momentum by small‐scale turbulent flows from moist convection. Traditional general circulation models (GCMs) and their multiscale modeling framework (MMF) versions poorly represent CMT due to insufficient information of subgrid‐scale flows at each GCM grid. Here the explicit scalar momentum transport (ESMT) scheme for representing CMT is implemented in the Energy Exascale Earth System Model‐Multiscale Modeling Framework (E3SM‐MMF) with embedded 2‐D cloud‐resolving models (CRMs), and verified against E3SM‐MMF simulations with 3‐D CRMs and observations. The results show that representing CMT by ESMT helps reduce climatological mean precipitation model bias over the western Pacific and the ITCZ regions, which is attributed to the weakened mean easterlies over the Pacific. Also, CMT from simulations with 2‐D and 3‐D CRMs impose a similar impact on Kelvin waves by reducing their variability and slowing down their phase speed, but opposite impacts on the Madden‐Julian Oscillation (MJO) variability. The ESMT scheme readily captures the climatological mean spatial patterns of the zonal and meridional components of CMT and their variability across multiple time scales, but shows some differences in estimating its magnitude. CMT mainly affects the MJO by decelerating its winds in the free troposphere, but accelerates its near‐surface winds. This study serves as a prototype for implementing CMT scheme in the MMF simulations, highlighting its crucial role in reducing model bias in mean state and spatiotemporal variability.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

A functional microbiome catalogue crowdsourced from North American rivers

Predicting elemental cycles and maintaining water quality under increasing anthropogenic influence requires knowledge of the spatial drivers of river microbiomes. However, understanding of the core microbial processes governing river biogeochemistry is hindered by a lack of genome-resolved functional insights and sampling across multiple rivers. Here we used a community science effort to accelerate the sampling, sequencing and genome-resolved analyses of river microbiomes to create the Genome Resolved Open Watersheds database (GROWdb). GROWdb profiles the identity, distribution, function and expression of microbial genomes across river surface waters covering 90% of United States watersheds. Specifically, GROWdb encompasses microbial lineages from 27 phyla, including novel members from 10 families and 128 genera, and defines the core river microbiome at the genome level. GROWdb analyses coupled to extensive geospatial information reveals local and regional drivers of microbial community structuring, while also presenting foundational hypotheses about ecosystem function. Building on the previously conceived River Continuum Concept, we layer on microbial functional trait expression, which suggests that the structure and function of river microbiomes is predictable. We make GROWdb available through various collaborative cyberinfrastructures, so that it can be widely accessed across disciplines for watershed predictive modelling and microbiome-based management practices.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Role of relativistic laser intensity on isochoric heating of metal wire targets

In a recent experimental campaign, we used laser-accelerated relativistic hot electrons to ensure heating of thin titanium wire targets up to a warm dense matter (WDM) state [EPL 114, 45002 (2016)]. The WDM temperature profiles along several hundred microns of the wire were inferred by using spatially resolved X-ray emission spectroscopy looking at the Ti Kαcharacteristic lines. A maximum temperature of ~30 eV was reached. Our study extends this work by discussing the influence of the laser parameters on temperature profiles and the optimisation of WDM wire-based generation. The depth of wire heating may reach several hundreds of microns and it is proven to be strictly dependent on the laser intensity. At the same time, it is quantitatively demonstrated that the maximum WDM temperature doesn’t appear to be sensitive to the laser intensity and mainly depends on the deposited laser energy considering ranges of 6×10 18 –6×10 20 W/cm 2 and 50–200 J.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Image mapping for multiple charge state beams using a beam induced fluorescence profile monitors

Work continues on a minimally invasive, nitrogen fluorescence gas sheet at the Facility for Rare Isotope Beams (FRIB). A low density gas sheet may be used to observe the 2D transverse beam profile of high intensity, multiple charge state beams with minimal interference. Spatially and temporally correlated profiles are of particular interest in locations where there is significant charge state spread, such as the FRIB linac folding segments. A low-density gas sheet measurement system offers advantages for gas handling in nitrogen sensitive areas, however signal intensity is significantly lower than techniques using higher density gas sheets and jets. This work discusses measurement considerations for photon distributions generated by several spatially separated interaction points and design considerations for a high-sensitivity optics system for handling the expected low signal intensity.

Accelerator Physics↗

NASA NTRS2011

Software Displays Data on Active Regions of the Sun

The Solar Active Region Display System is a computer program that generates, in near real time, a graphical display of parameters indicative of the spatial and temporal variations of activity on the Sun. These parameters include histories and distributions of solar flares, active region growth, coronal mass ejections, size, and magnetic configuration. By presenting solar-activity data in graphical form, this program accelerates, facilitates, and partly automates what had previously been a time-consuming mental process of interpretation of solar-activity data presented in tabular and textual formats. Intended for original use in predicting space weather in order to minimize the exposure of astronauts to ionizing radiation, the program might also be useful on Earth for predicting solar-wind-induced ionospheric effects, electric currents, and potentials that could affect radio-communication systems, navigation systems, pipelines, and long electric-power lines. Raw data for the display are obtained automatically from the Space Environment Center (SEC) of the National Oceanic and Atmospheric Administration (NOAA). Other data must be obtained from the NOAA SEC by verbal communication and entered manually. The Solar Active Region Display System automatically accounts for the latitude dependence of the rate of rotation of the Sun, by use of a mathematical model that is corrected with NOAA SEC active-region position data once every 24 hours. The display includes the date, time, and an image of the Sun in H light overlaid with latitude and longitude coordinate lines, dots that mark locations of active regions identified by NOAA, identifying numbers assigned by NOAA to such regions, and solar-region visual summary (SRVS) indicators associated with some of the active regions. Each SRVS indicator is a small pie chart containing five equal sectors, each of which is color-coded to provide a semiquantitative indication of the degree of hazard posed by one aspect of the activity at the indicated location. The five aspects in question are the history of solar flares, the history of coronal mass ejections, the growth or decay of activity, the overall size, and the magnetic configuration. Mouse-clicking on an active-region-marking dot, SRVS indicator, or NOAA region number causes the program to generate a solar-region summary table (SRT) for the active region in question. The SRT contains additional quantitative and qualitative data, beyond those contained in the SRVS: These data include the solar coordinates of the region, the area of the region and its change in area during the past 24 hours, the change in the number of sunspots in the region during the past 24 hours, the magnetic configuration, and the types, dates, and times of the most recent flare and coronal mass ejection.

Golightly, Mike↗

DOE OSTI2026

A buoyancy–shear–drag–scalar-based turbulence model for power-law acceleration-driven Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing

A previously developed phenomenological turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing based on a general buoyancy–shear–drag model [O. Schilling, “A buoyancy–shear–drag-based turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing,” Physica D 402, 132238 (2020)] is extended to include active or passive scalar mixing and power-law acceleration-driven Rayleigh–Taylor mixing. The buoyancy–shear–drag equations are coupled to a scalar variance equation that is used to define the molecular mixing parameter θ m , and when the scalar is active, modifies the Rayleigh–Taylor and Kelvin–Helmholtz mixing layer growth parameters to depend on the asymptotic value of this parameter, θ mol . Here, the scalar variance equation is closed by algebraically or differentially modeling the scalar variance dissipation rate. Nonlinear analytical solutions of the model are obtained in the total and separate bubble and spike mixing layer width formulations with the algebraic scalar variance dissipation rate for each instability, which are then used to calibrate the mechanical and scalar equation coefficients to predict specific values of physical observables and molecular mixing parameters. Surrogate mechanical and scalar turbulent fields can be constructed by multiplying a presumed self-similar spatial profile by appropriate functions of the width and its time derivative, and of the scalar obtained by solving the ordinary differential model equations. The explicit modeling and solution of turbulent transport equations are not required. The bubble and spike mixing layer width and scalar variance equations are then solved numerically for constant-acceleration Rayleigh–Taylor, impulsively reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing, confirming that the prescribed level of molecular mixing is correctly predicted and illustrating the spatiotemporal evolution of the scalar fields.

Buoyancy–drag↗

NASA NTRSDate not supplied

A Database of CFD-Based Buffet Forcing Functions for Artemis I Structural Response Evaluation

Time-accurate FUN3D simulations are utilized to estimate buffet-induced unsteady forces experienced by the Space Launch System during the Artemis I (AR01) flight. A set of FUN3D simulations was developed that employed time-accurate mesh translations to simulate the changing velocity and attitude based on the AR01 best estimated trajectory. In these simulations, referred to as accelerating-flow simulations, the freestream Mach number increased from 0.80 to 1.92. Additional time-accurate simulations were obtained at constant freestream Mach number equal to 0.95, 1.18, 1.70, thereby simulating stationary conditions experienced by the flow in a wind-tunnel. On the grounds of favorable comparisons between simulated and flight-measured environments, the FUN3D-based surface pressures were utilized to develop a buffet forcing function (BFF) database. This BFF database was analyzed to characterize the spatial distribution and frequency content of the buffet forces during transonic and supersonic portions of the AR01 flight. The region of interest is located downstream of the forward attachment (FA) hardware between the core stage and the solid rocket boosters where vortex shedding off the FA protuberance produces significant unsteadiness. The analysis reveals that, at transonic and supersonic conditions, buffet forces that are based on constant freestream Mach number data are a good approximation of those based on accelerating-flow simulations.

FUN3D↗

NASA NTRSDate not supplied

A Database of CFD-Based Buffet Forcing Functions for Artemis I Structural Response Evaluation

transonic buffet↗

DOE OSTI2022

Continuous Emulation and Multiscale Visualization of Traffic Flow Using Stationary Roadside Sensor Data

With the advent of the next-generation traffic monitoring systems, there has been a significant increase in the spatial-temporal resolution of vehicle mobility data in many cities. Effective analysis and visualization of such data can provide transportation planners with data-driven insights, which can facilitate the understanding of multiscale traffic dynamics. In this paper, we present a web-based traffic emulator for emulating and visualizing near-real-time and historical traffic flows on highways using data from road-side sensors. To construct a continuous traffic flow, the emulator adopts an analytical pipeline that can (a) integrate traffic data collected from discrete road-side radar detection sensors, (b) interpolate traffic conditions (vehicle speed and volume) on unmeasured road segments based on traffic flow theory, and (c) generate lane-specific vehicle trajectories and movements using a mathematically optimized representation of the road network. Our app also provides an integrated visual workflow that allows users to explore the interconnected traffic dynamics using an appropriate traffic flow visualization selected based on the level of detail. We devise two innovative geo-visualization techniques that utilize an animated strips-network representation and a lane usage matrix to visualize lane performances. To ensure a smooth emulation of large-scale traffic flow in an easy-to-access web environment, we implement the emulator using client-side GPU-accelerated techniques. Lastly, we close with a case study that visualizes traffic dynamics of two scenarios - an afternoon peak hour and a traffic accident - in Chattanooga, Tennessee. Our app visualizes the responses of traffic dynamics during different traffic conditions, and to the presence of the traffic accident at different spatial scales.

42 ENGINEERING↗

DOE OSTI2023

ANNIE: the Accelerator Neutrino Neutron Interaction Experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a Gadolinium-loaded water Cherenkov detector placed in the Booster Neutrino Beam (BNB) at the Fermi National Accelerator Laboratory, USA. The primary physics goal of ANNIE is to perform neutrino cross-section measurements that will constrain systematic uncertainties in the next generation of long-baseline neutrino experiments. The first measurement will be the multiplicity of final-state neutrons from neutrino-nucleus interactions in water. Alongside these measurements, ANNIE has achieved the first ever deployments of two novel detector technologies in a neutrino beam: Large Area Picosecond Photodetectors (LAPPDs) and Water-based Liquid Scintillator (WbLS). LAPPDs are micro-channel-plate-based devices that provide timing resolution of ~100 picoseconds and sub-centimeter spatial resolution. WbLS combines the low attenuation and Cherenkov production of pure water with the high light-yield and low detection threshold of liquid scintillator. This talk will discuss the status of ANNIE's physics and R&D measurements.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

The impact of hot-press conditions on the durability of polymer electrolyte membrane fuel cells

The proton exchange membrane integrity can be compromised during hot-press fabrication of membrane electrode assemblies (MEAs) causing premature cell failures during operation. In this work, infrared (IR) thermography was used as a diagnostic tool to spatially visualize hydrogen (H 2 ) crossover and identify process-induced-membrane irregularities (PIMs). These irregularities were identified as seed locations for MEA failures. Fine tuning of hot-press conditions was used to mitigate premature cell failures informed by accelerated stress testing (AST). The impact of PIMs on the initial performance, high-frequency resistances, open-circuit voltage, and H 2 crossover are reported. Nafion XL and 212 membranes, hot-pressed with a force of 16 kg/cm 2 and temperature of 120°C, were found to be consistently irregularity-free. Irregularity-free MEAs using Nafion 211, 212, and XL membranes demonstrated AST lifetime improvements of 58, 64 and 400%, respectively, compared to those fabricated with non-optimized conditions. In conclusion, this work highlights the importance of fabrication parameters on premature cell failures.

08 HYDROGEN↗

NASA NTRS1985

Average and worst-case specifications of precipitating auroral electron environment

The precipitation electrons in the auroral environment are highly variable in their energy and intensity in both space and time. As such they are a source of potential hazard to the operation of the Space Shuttle and other large spacecraft operating in polar orbit. In order to assess these hazards both the average and extreme states of the precipitating electrons must be determined. Work aimed at such a specification is presented. First results of a global study of the average characteristics are presented. In this study the high latitude region was divided into spatial elements in magnetic local time and corrected geomagnetic latitude. The average electron spectrum was then determined in each spatial element for seven different levels of activity as measured by K sub p using an extremely large data set of auroral observations. Second a case study of an extreme auroral electron environment is presented, in which the electrons are accelerated through field aligned potential as high as 30,000 volts and in which the spacecraft is seen to charge negatively to a potential approaching .5 kilovolts.

Hardy, D. A.↗

NASA NTRS1985

Analysis of the NASA/MSFC airborne Doppler lidar results from San Gorgonio Pass, California

The NASA/MSFC Airborne Doppler Lidar System was flown in July 1981 aboard the NASA/Ames Convair 990 on the east side of San Gorgonio Pass California, near Palm Springs, to measure and investigate the accelerated atmospheric wind field discharging from the pass. At this region, the maritime layer from the west coast accelerates through the pass and spreads out over the valley floor on the east side of the pass. The experiment was selected in order to study accelerated flow in and at the exit of the canyon. Ground truth wind data taken concurrently with the flight data were available from approximately 12 meteorological towers and 3 tala kites for limited comparison purposes. The experiment provided the first spatial data for ensemble averaging of spatial correlations to compute lateral and longitudinal length scales in the lateral and longitudinal directions for both components, and information on atmospheric flow in this region of interest from wind energy resource considerations.

Cliff, W. C.↗