Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slosh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Hydroelastic vibration analysis of partially liquid-filled shells using a series representation of the liquid

A series representation of the oscillatory behavior of incompressible nonviscous liquids contained in partially filled elastic tanks is presented. Each term is selected on the basis of hydroelastic vibrations in circular cylindrical tanks. Using a complementary energy principle, the superposition of terms is made to approximately satisfy the liquid-tank interface compatibility. This analysis is applied to the gravity sloshing and hydroelastic vibrations of liquids in hemispherical tanks and in a typical elastic aerospace propellant tank. With only a few series terms retained, the results correlate very well with existing analytical results, NASTRAN-generated analytical results, and experimental test results. Hence, although each term is based on a cylindrical tank geometry, the superposition can be successfully applied to noncylindrical tanks.

Housner, J. M.↗

Engineering aspects of the Stanford relativity gyro experiment

According to certain theoretical predictions, the Newtonian laws of motion must be corrected for the effect of a gravitational field. Schiff (1960) proposed an experiment which would demonstrate the effect predicted by Einstein's Theory of General Relativity on a gyroscope. The experiment has been under development at Stanford University since 1961. The requirements involved make it necessary that the test be performed in a satellite to take advantage of weightlessness in space. In a discussion of engineering developments related to the experiment, attention is given to the development of proportional helium thrusters, the simulation of the attitude control system, aspects of inner loop control, the mechanization of the two-loop attitude control system, the effects of helium slosh on spacecraft pointing, and the data instrumentation system.

Everitt, C. W. F.↗

Vibration of a liquid with a free surface in a spinning spherical tank

The problem of forced fluid vibrations in a partially filled spinning spherical tank is solved numerically by using the finite element method. The governing equations include Coriolis acceleration and spatially homogeneous vorticity. An exponential instability is detected in the present simulation for fill ratios below 0.5 and centrifugal acceleration to thrust ratios less than 1.7. This fictitious instability appears in the model as a result of the homogeneous vortex assumption since the free slosh equations are neutrally stable in the Liapunov sense.

El-Raheb, M.↗

Dynamics of superfluid helium in zero gravity

The Spacelab 2 superfluid helium experiment was designed to: (1) examine the behavior of capillary waves and measure their velocity and dampling; (2) study the sloshing motion of bulk superfluid helium in near-zero gravity in order to determine its effects on sensors and attitude control systems for far infrared telescopes; and (3) determine the temperature distributions in the liquid and their correlation with bulk motion. The experiment system includes a helium cryostat with a sensor head and a microcomputer to provide electrical excitation and gather and transmit resultant responses to the experiment teams on the ground. Astronaut intervention is possible.

Mason, P. V.↗

Impact cratering in viscous targets - Laboratory experiments

To determine the effects of target yield strength and viscosity on the formation and morphology of Martian multilobed, slosh and rampart-type impact craters, 75 experiments in which target properties and impact energies were varied were carried out for high-speed motion picture observation in keeping with the following sequence: (1) projectile initial impact; (2) crater excavation and rise of ejecta plume; (3) formation of a transient central mound which generates a surge of material upon collapse that can partly override the plume deposit; and (4) oscillation of the central mound with progressively smaller surges of material leaving the crater. A dimensional analysis of the experimental results indicates that the dimensions of the central mound are proportional to (1) the energy of the impacting projectile and (2) to the inverse of both the yield strength and viscosity of the target material, and it is determined that extrapolation of these results to large Martian craters requires an effective surface layer viscosity of less than 10 to the 10th poise. These results may also be applicable to impacts on outer planet satellites composed of ice-silicate mixtures.

Greeley, R.↗

The digital autopilot for thrust vector control of the Shuttle Orbital maneuvering system

This paper describes the requirements for and the design, development and performance of the digital autopilots (DAPs) for thrust vector control, utilizing the orbital maneuvering system (OMS) of the Space Shuttle Orbiter. The hardware and software requirements which caused the design to assume its current form are described. Also, the design synthesis, which considered rigid body stability margins, bending and slosh stabilization, guidance loop compensation, off-nominal performance and hardware and software limitations is presented. The performance of the OMS control system is summarized utilizing flight data from the first three Space Transportation System (STS) flights.

Penchuk, A.↗

Penn State Get Away Special

Three proposed spaceborne experiments to be conducted by equipment in the Get Away Special (GAS) payload are described. The specific contribution and effect of convection in heat transfer is discussed. Investigations of the surface tension of two liquids in space environment and the problem of liquid slosh in spin stabilized satellites are reviewed.

Thames, M.↗

Performance testing of the Galileo attitude control system

Performance testing plans, procedures, and initial results for the Galileo Attitude and Articulation Control Subsystem are described. The objectives of performance testing include test bed comparisons, examining the interactions between spacecraft dynamics and controllers, and verifying the ability to tune control algorithms in flight to meet specific performance requirements. Two primary test beds are described. One, the Integration Test Laboratory, drives actual flight hardware components and support equipment with a real time computer simulation of spacecraft dynamics. The other, the Functional Simulator, is a nonreal time computer simulation with high fidelity spacecraft dynamics, including flexible appendages, fuel slosh, and simulated hardware components. Initial Functional Simulator results are presented which illustrate spacecraft response to open loop spin-up and turn commands. A closed loop sun acquisition turn is also demonstrated. Future tests for verifying performance of attitude determination, spacecraft control, and scan platform pointing functions are outlined.

Bell, C. E.↗

Pointing and control system design study for the space infrared telescope facility (SIRTF)

The design and performance of pointing and control systems for two space infrared telescope facility vehicles were examined. The need for active compensation of image jitter using the secondary mirror or other optical elements was determined. In addition, a control system to allow the telescope to perform small angle slews, and to accomplish large angle slews at the rate of 15 deg per minute was designed. Both the 98 deg and the 28 deg inclination orbits were examined, and spacecraft designs were developed for each. The results indicate that active optical compensation of line-of-sight errors is not necessary if the system is allowed to settle for roughly ten seconds after a slew maneuver. The results are contingent on the assumption of rigid body dynamics, and a single structural mode between spacecraft and telescope. Helium slosh for a half full 4000 liter tank was analyzed, and did not represent a major control problem.

Lorell, K. R.↗

Space shuttle external tank performance improvements: The challenge

The external tank (ET) has been actively involved in performance improvements since the inception of the space shuttle program, primarily by weight savings. Weight savings were realized on the first block of flight articles (standard weight tank). With a need for further performance improvements, the ET Program Office was requested to develop a program to reduce tank weight an additional 6000 lb and schedule delivery of the first lightweight ET (LWT) for June 1982. The weight savings program was accomplished by: (1) a unique approach to use of factors of safety; (2) design optimization; and (3) redesign of structures with large margins of safety which resulted in an actual weight savings of 7294 lb. Additional studies have identified further weight savings which are to be implemented at appropriate times in production flow. Examples are an improved thermal protection system for the LH2 tank aft dome and reduction of slosh baffles in the LO2 tank based on flight data. All performance improvements were compared and selected based on non-recurring and recurring cost and technical risk.

Coldwater, H. R.↗

Propellant transfer: Tethered depot

Spacebasing of orbital transfer vehicles at a space station requires a depot that safely and efficiently stores and transfers the resupply propellants. In order to transfer propellants, a method effectively acquire only liquid and vent only gas must exist. A method that produces a low gravity to settle propellants would bypass these weaknesses, while allowing ground-like operations. This low gravity can be passively produced using gravity gradient techniques. A satellite with a large length to diameter ratio, such as a depot attached to a space station with a tether, stabilizes along on Earth radial because of an outward acceleration proportional to the distance from the satellite's center of gravity. Analysis indicates that liquid can be setteled with relatively short tether lengths. The feasibility, design requirements, and operational limitations of a tethered refueling depot were investigated with special emphasis on slosh control.

Kroll, K.↗

Detailed studies of aviation fuel flowability

Six Jet A fuels, with varying compositions, were tested for low temperature flowability in a 190-liter simulator tank that modeled a section of a wing tank of a wide-body commercial airplane. The insulated tank was chilled by circulating coolant through the upper and lower surfaces. Flow-ability was determined as a function of fuel temperature by holdup, the fraction of unflowable fuel remaining in the tank after otherwise complete withdrawal. In static tests with subfreezing tank conditions, hold up varied with temperature and fuel composition. However, a general correlation of two or three classes of fuel type was obtained by plotting holdup as a function of the difference between freezing point and boundary-layer temperature, measured 0.6 cm above the bottom tank surface. Dynamic conditions of vibrations and slosh or rate of fuel withdrawal had very minor effects on holdup. Tests with cooling schedules to represent extreme, cold-day flights showed, at most, slight holdup for any combination of fuel type or dynamic conditions. Tests that superimposed external fuel heating and recirculation during the cooldown period indicates reduced hold up by modification of the low-temperature boundary layer. Fuel heating was just as effective when initiated during the later times of the tests as when applied continuously.

Mehta, H. K.↗

Flight vehicle propellant surface motion by numerical method

The marker and cell technique is applied to three idealized hydrodynamic situations of interest to the Space Shuttle External Tank (ET). These applications illustrate the versatility of this technique as well as its usefulness in solving similar problems in the aerospace industry. The codes used are the simplified marker and cell (SMAC) code and the variable grid simplified marker and cell code named ERIE. The examples focus on the dropout height in the LH2 tank, the slosh behavior of propellant in the bottom dome of the ET during thrust termination, both of which are required to accurately determine the amount of usable propellants, and the effect on liquid surface due to LO2 tank wall motions occurring during Space Shuttle lift-off. Comparisons with experimental results and linear theory are also presented.

Mehta, G.↗

The integrated enstrophy budget of the winter stratosphere diagnosed from LIMS data

The quasi-geostrophic integrated enstrophy budget for the 1978 to 1979 winter has been analyzed from 10-0.1 mb using LIMS data. During January and late February periods a significant imbalance in the budget appears at 10mb. This imbalance is attributed to Rossby wave breaking. It is produced by the irreversible transfer of enstrophy to smaller scales not resolved by LIMS. The imbalance episodes correspond well to the appearance of Ertel vorticity filaments shown by McIntyre and Palmer (1984). From a seasonal viewpoint, the integrated enstrophy shows an average (although irregular) transfer from a zonal mean reservoir to waves which are then dissipated. On a shorter time scale the integrated enstrophy sloshes back and forth between the waves and mean flow in early winter; then, beginning with the January sudden warming, the total enstrophy is reduced more rapidly. Between 10 mb and 1 mb this reduction is more or less continuous until the end of February. However, in the mesosphere the total enstrophy decrease is very short lived, being quickly restored after the January warming. Even though the zonal mean integrated enstrophy is large, only about 10% can be utilized by the waves. The available integrated potential enstrophy is introduced, which is a better measure of how close the flow is to saturation by Rossby waves. The largest amount of available potential enstrophy in early January is at 1 mb with decreasing amounts above and below. Saturation of the flow by Rossby waves occurs below 1 mb only coincident with sudden warmings; however, at mesospheric heights the flow appears to be nearly saturated throughout the winter.

Schoeberl, M. R.↗

US gravity utilization of tethers activity

The feasibility, requirements, and limitations of fluid transfer on a tethered system is evaluated. The study is conducted to simplify fluid transfer and to improve safety. The effects of gravity on these factors is also noted. Tether orbital refueling is used to settle fluid and to overcome the surface tension forces that are in space with the gravity level. It also allows a separation, when on the space station, from contamination and also from explosion hazards. Once the cryogenic propellant is settled the most important thing is the fluid slosh. Future plans of a gravity laboratory and a demonstration of gravity utilization using a TSS type of deployer are considered.

Kroll, K.↗

Oscillations of a viscous compound drop

The effect of viscosity on normal mode oscillations of a compound drop is determined for a range of values of the viscosity, and the effect of a host medium is considered. The general form of the dispersion relation is derived, and numerical values are obtained for the case of an annular liquid region composed of silicon oil and with the core and host regions taken to be air. Results indicate that the sloshing mode of the compound drop is more damped than the bubble mode.

Lyell, M. J.↗

Dynamic centering of liquid shells

The moderate-amplitude axisymmetric oscillations of an inviscid liquid shell surrounding an incompressible gas bubble are calculated by a multiple-time-scale expansion for initial deformations composed of two-lobed perturbations of the shell and a displacement of the bubble from the center of mass of the liquid. Two types of small-amplitude motion are identified and lead to very different nonlinear dynamic interactions, as described by the results valid up to second order in the amplitude of the initial deformation. In the 'bubble mode', the oscillations of the captive bubble and the liquid shell are exactly in phase and the bubble vibrates about its initial eccentric location. The bubble moves toward the center of the drop when the shell is perturbed into a 'sloshing mode' of oscillation where both interfaces move out of phase. These results explain the centering of liquid shells observed in several experiments.

Tsamopoulos, John A.↗

Low frequency vibrational stirring - A new method for rapidly mixing solutions and melts during growth

A new method for rapidly stirring liquids has been developed which may be useful in crystal growth applications. The method involves the introduction of orthogonally coupled low frequency vibrations to fluids contained in cylindrical crucibles. A mathematical model has been developed to describe the influence of this vibrational stirring method on fluid flow. The optimum sloshing frequencies calculated for a specific system geometry were very close to those observed experimentally. A systematic study of the fluid flow induced by the vibrational motion was carried out at room temperature using aqueous solutions containing glycerine. Preliminary experiments were carried out to study the effect of vibrational stirring on interface shape and position during the Bridgman growth of CsCdCl3, a model system.

Liu, W.-S.↗