Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Ductility enhancement from interface dislocation sources in a directionally solidified beta + gamma + gamma-prime Ni-Fe-Al composite alloy

A directionally solidified beta + gamma + gamma-prime Ni-Fe-Al in situ composite alloy of composition Ni50Fe30Al20 has been used to investigate the effect of a plastically soft second phase on the mechanical behavior of a B2 ordered intermetallic alloy. This material exhibits extensive plasticity during compressive deformation at room temperature and fails in shear with extensive gamma + gamma-prime lamellar or rod pullout. The material also exhibits about 10 percent tensile elongation to fracture at room temperature, with final fracture that includes substantial necking of the gamma + gamma-prime lamellae or rods. Observation of slip lines and dislocation substructures discloses that the normally brittle beta matrix undergoes extensive plasticity in order to deform compatibly with the more ductile gamma phase. The plasticity of the beta matrix is accomplished by the generation of glissile dislocations into the beta matrix from the beta/gamma interface region and is enhanced because of a favorable beta-gamma orientation relationship for slip transfer. Ductility enhancement from interface-generated mobile dislocations generated from beta-gamma interfaces is compared to that observed in film-coated beta-NiAl single crystals and FeAl polycrystals.

Larsen, M.↗
NASA NTRS1992

Arcing of negatively biased solar cells in a plasma environment. I - Experimental observations

A variety of experiments have been performed which identify key factors contributing to the arcing of negatively biased high voltage solar cells operating in a low earth orbit plasma environment. These efforts have led to a reduction of greater than a factor of 100 in the arc frequency of a single cells following proper remeditation procedures. Experiments naturally led to and focused on the adhesive/encapsulating that is used to bond the protective cover slip to the solar cell. An image-intensified CCD camera system recorded UV emission from arc events which occurred exclusively along the interfacial edge between the cover slip and the solar cell. Microscopic inspection of this interfacial region showed a bead of encapsulant along this entire edge. Elimination of this encapsulant bead reduced the arc frequency by two orders of magnitude.

Upschulte, B. L.↗
NASA NTRS1992

Inelastic deformation of metal matrix composites: Plasticity and damage mechanisms, part 2

The inelastic deformation mechanisms for the SiC (SCS-6)/Ti-15-3 system were studied at 538 C (1000 F) using a combination of mechanical measurements and detailed microstructural examinations. The objectives were to evaluate the contributions of plasticity and damage to the overall MMC response, and to compare the room temperature and elevated temperature deformation behaviors. Four different laminates were studied: (0)8, (90)8,(+ or -45)2s, and (0/90)2s, with the primary emphasis on the unidirectional (0)8, and (90)8 systems. The elevated temperature responses were similar to those at room temperature, involving a two-stage elastic-plastic type of response for the (0)8 system, and a characteristic three-stage deformation response for the (90)8 and (+ or -45)2s systems. The primary effects of elevated temperatures included: (1) reduction in the 'yield' and failure strengths; (2) plasticity through diffused slip rather than concentrated planar slip (which occurred at room temperature); and (3) time-dependent deformation. The inelastic deformation mechanism for the (0)8 MMC was dominated by plasticity at both temperatures. For the (90)8 and (+ or -45)2s MMCs, a combination of damage and plasticity contributed to the deformation at both temperatures.

Majumdar, B. S.↗
NASA NTRS1993

Report of the Seasat Failure Review Board

The Seasat spacecraft failed on October 9, 1978, after satisfactory operation in orbit for 105 days, as a result of a loss of electrical power in the Agena bus that was used as a part of the spacecraft. The loss of power was caused by a massive and progressive short in one of the slip ring assemblies that was used to connect the rotating solar arrays into the power subsystem. The most likely cause of this short was the initiation of an arc between adjacent slip ring brush assemblies. The triggering mechanism of this arc could have been either a wire-to-brush assembly contact, a brush-to-brush contact, or a momentary short caused by a contaminant that bridged internal components of opposite electrical polarity.

Source record↗
NASA NTRS1992

Mechanisms of isothermal phase transformations in rapidly solidified Ti-24Al-11Nb

A dynamic simulation for the motion of an isolated superdislocation (SD) under an applied stress is presented. The simulation incorporates the concept that cross slip from (111) planes to (010) planes can locally pin the SD. It is determined that the principal effect of cross-slip-pinning is not the reduction in the SD velocity, but rather the exhaustion of the density of mobile SDs.

Hsiung, L. M.↗
NASA NTRS1992

On the structure of cellular solutions in Rayleigh-Benard-Marangoni flows in small-aspect-ratio containers

Multiple steady flow patterns occur in surface-tension/buoyancy-driven convection in a liquid layer heated from below (Rayleigh-Benard-Marangoni flows). Techniques of numerical bifurcation theory are used to study the multiplicity and stability of two-dimensional steady flow patterns (rolls) in rectangular small-aspect-ratio containers as the aspect ratio is varied. For pure Marangoni flows at moderate Biot and Prandtl number, the transitions occurring when paths of codimension 1 singularities intersect determine to a large extent the multiplicity of stable patterns. These transitions also lead, for example, to Hopf bifurcations and stable periodic flows for a small range in aspect ratio. The influence of the type of lateral walls on the multiplicity of steady states is considered. 'No-slip' lateral walls lead to hysteresis effects and typically restrict the number of stable flow patterns (with respect to 'slippery' sidewalls) through the occurrence of saddle node bifurcations. In this way 'no-slip' sidewalls induce a selection of certain patterns, which typically have the largest Nusselt number, through secondary bifurcation.

Dijkstra, Henk A.↗
NASA NTRS1991

Critical experiments of the self-consistent model for polycrystalline Hastelloy-X

A viscoplastic constitutive model is presented for the estimation of the overall mechanical response of Hastelloy-X polycrystalline metals from a knowledge of single crystal behavior. The behavior of polycrystal is derived from that of single crystals using a self-consistent formulation. The single crystal behavior which has been used was developed by summing postulated slip on crystallographic slip systems. The plasticity and creep are treated coupledly using unified viscoplastic model which includes the interaction effects between rapid and slow deformation at elevated temperature. The validity of the model is directly tested by experiments on Hastelloy-X in both single crystal and polycrystalline versions.

Shi, Shixiang↗
NASA NTRS1993

Analysis of hypersonic arcjet flow fields and surface heating of blunt bodies

A Gauss-Seidel implicit aerothermodynamic Navier-Stokes computational CFD code with thermochemical surface conditions (GIANTS) and with appropriate boundary conditions was developed for the analysis of hypersonic arcjet flows over large angle blunt bodies. Two-dimensional axisymmetric multicomponent full Navier-Stokes equations were solved, together with boundary conditions, to account for the surface slip, surface catalysis, and energy and mass conservation at the body surface. It is shown that the predictions for isothermal, noncatalytic, and no-slip surface conditions which are made using the GIANTS code with simple boundary conditions agree with those of the LAURA code, and the predicted normalized heating distributions over the forebody surface with boundary conditions for various cone angles are consistent with the trends of data from arcjet experiments.

Chen, Y.-K.↗
NASA NTRS1993

The viscoplastic behavior of Hastelloy-X single crystal

A viscoplastic constitutive model for simulating the behavior of Hastelloy-X single crystal material was derived based on crystallographic slip theory. To determine the appropriate constitutive model constants and to test the predictions of the model, tests on Hastelloy-X crystals were carried out, including the rate sensitivity, cyclic hardening, nonproportional hardening, relaxation, and strain rate dip tests. It was found necessary to include cube slip in the model in order to correlate the uniaxial behavior of the single crystal, to incorporate the interaction effects in both the hardening and the dynamic recovery evolution equations for the drag stress, and to successfully capture correct strain rate sensitivity under biaxial tension-torsion loading conditions.

Jordan, Eric H.↗
NASA NTRS1993

GPS measurements of crustal deformation associated with the 22 April 1991, Valle de la Estrella , Costa Rica earthquake

Results are presented for analysis of Global Positioning System (GPS) measurements made at sites in Costa Rica in February and July 1991. Significant horizontal and vertical displacements relative to February positions were observed. Differences were found in GPS derived vertical and horizontal displacements as compared to other types of geodetic measurements of uplift in the coastal regions. A slip dislocation model which fits the GPS measured displacement was computed. Differences between these data sets and their associated models were investigated in light of unmodeled slip heterogeneity on the fault and post-seismic displacements.

Lundgren, Paul R.↗
NASA NTRS1993

Stagnation flowfield analysis for an aeroassisted vehicle

Hypersonic reactive flowfield results are presented for the flow about an axisymmetric representation of a three-dimensional aeroassisted vehicle using the viscous shock-layer (VSL) and Navier-Stokes (NS) equations for low- and high-altitude entry conditions, respectively. Solutions are limited to the stagnation region. The NS results have been obtained by employing the surface recombination boundary condition for an 11-species air model, whereas the VSL calculations are carried out by using a 5-species model. Three widely used surface recombination rate models are implemented with these two flowfield calculation procedures. The low-density (or high altitude) NS solutions are obtained with surface slip equations and compare quite well with the direct simulation Monte Carlo predictions. For higher densities (or lower altitudes), the no-slip VSL solutions are considered adequate. Results from this study highlight the effect of surface catalyticity on surface heating and electron number density.

Gupta, Roop N.↗
NASA NTRS1993

Higher-order viscous shock-layer solutions for high altitude flows

A higher-order viscous shock-layer (HVSL) method has been developed and is used to obtain physically consistent results under varying degrees of low-density conditions for perfect-gas and nonequilibrium flows past long slender bodies. This method is implemented with higher-order body and shock slip conditions. Detailed comparisons with the direct simulation Monte Carlo (DSMC) method and Navier-Stokes (NS) calculations establish HVSL as a computationally efficient code for the low-density calculations. Further, it is shown that the deficiencies in the standard viscous shock-layer (VSL) method when predicting low-density flows lie in the governing equations and not with the slip boundary conditions as considered by earlier researchers.

Gupta, Roop N.↗
NASA NTRS1993

Global positioning system reoccupation of early triangulation sites - Tectonic deformation of the Southern Coast Ranges

We study tectonic deformation in the Southern Coast Range, California. We use triangulation and astronomic azimuth data collected since 1875, trilateration since 1970, and global positioning system data collected from 1986 to 1987. Two modeling techniques have been used. An elastic block-fault model is applied to study the tectonic motion of the San Andreas Fault and the San Gregorio-Hosgri Fault. Station velocities are modeled to study regional deformations. Results show that the regional deformation is predominantly controlled by deep strike-slip motion along the San Andreas Fault, at a rate of 33 +/- 2 mm/yr. Deep slip along the San Gregorio-Hosgri Fault is about 0-4 mm/yr, assuming a locked suit to a depth of 20 km. Convergence normal to the San Andreas Fault in the Southern Coast Ranges is not greater than 0.02 microrad/yr.

Shen, Zheng-Kang↗
NASA NTRS1993

Comparisons between DSMC and the Navier-Stokes equations for reentry flows

A detailed comparison is made between Navier-Stokes and DSMC calculations for flows near the continuum limit to assess the accuracy of the continuum equations in this regime. Meaningful comparisons require the use of similar physical models. This necessitates the inclusion of a separate rotational energy equation and use of slip boundary conditions. Inclusion of slip boundary conditions resulted in improved agreement between surface properties. Moreover, good agreement was obtained for the various temperatures in the nonequilibrium portion of the flow field that does not contain the shock region. Departures are noted in the shock region and in regions where thermal diffusion effects are important.

Olynick, David R.↗
NASA NTRS1993

The nature of the Landers-Mojave earthquake line

The Landers, California, earthquake of 28 June 1992 (magnitude = 7.3) is the latest of six significant earthquakes in the past 60 years whose epicenters and slip directions define a 100-kilometer alignment running approximately N 15 deg W across the central Mojave region. This pattern may indicate a geologically young throughgoing fault that replaces numerous older strike-slip faults by obliquely cutting across them. These older faults, and perhaps also the bend in the San Andreas fault, may be losing their ability to accommodate upper crustal deformation because they have become unfavorably oriented with respect to the regional stress field.

Nur, Amos↗
NASA NTRS1921

Resume of the theory of naval and aerial propulsive propellers and of airplanes in the rectilinear flight

Though dissimilar, these two subjects have been united because they have some points in common. The computation of the movement of an airplane can only be correctly established if we are in a position to know exactly the thrust and resisting torque of the propeller for the various values of slip, which may vary greatly according to circumstance. The first part of the work concerns propellers and introduces as a fundamental variable, the true slip (delta) with respect to the effective pitch, which is the advance per revolution of the propeller corresponding to no thrust. The second part deals with characteristic curves of an airplane.

Rateau, A↗
NASA NTRS1926

Report on Tests of Metal Model Propellers in Combination with a Model VE-7 Airplane

This report, prepared at the request of the NACA, describes tests of three metal model propellers, in a free air stream and in front of a model of a VE-7 airplane. The effect of introducing the model airplane is shown to be an increase in thrust and power coefficients and efficiency at small slip, and a decrease in the same at large slip.

PROPELLERS - NAVY WIND TUNNEL TESTS (STANFORD UNIV↗