Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selected inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Correction of burst errors containing bit slippages for cyclic block codes

A technique is presented for correction of an (n,k) cyclic block code subjected to a noise disturbance consisting of an arbitrary number of both bit deletions and bit inversions contained within a single error burst. Following the procedure described by Meggitt (1961), the correction of a b-bit burst is attempted by first loading the initial error syndrome into an (n-k) order feedback shift register with taps selected for the code's generating polynomial; the register is then successively shifted one bit position in the direction of lower order. The discussion covers burst correction with m-bit deletion, burst/deletion decoder implementation, false correction probability, and bit slippage involving bit insertions. The principal elements of the burst/deletion correction decoder are presented in schematic form.

Green, E. P.↗

A New Look at Aerosol Optical Models in the MODIS/AERONET ERA

The MODerate resolution Imaging Spectroradiometer (MODIS) aboard NASA's Terra satellite will permit the first time operational satellite retrievals of atmospheric aerosols over land. The retrieval uses dynamic models of aerosol optical properties developed from ground-based sun/sky radiometer data at selected specific locations. Three recent developments argue for a reevaluation of these optical models. (1) The expansion of the AERONET sun/sky radiometer network into new geographical regions that possibly features aerosols with different properties. (2) The development of the Dubovik sky radiance inversion that now offers a more comprehensive retrieval of aerosol optical properties. (3) The launch of the Terra satellite and acquisition of MODIS data that will reveal exactly how well the models perform.

Remer, Lorraine↗

Influence of spaceflight on succinate dehydrogenase activity and soma size of rat ventral horn neurons

Succinate dehydrogenase (SDH) activities and soma cross-sectional areas (CSA) of neurons in the dorsolateral region of the ventral horn at the L5 segmental level of the spinal cord in the rat were determined after 14 days of spaceflight and after 9 days of recovery on earth. The results were compared to those in age-matched ground-based control rats. Spinal cords were quick-frozen, and the SDH activity and CSA of a sample of neurons with a visible nucleus were determined using a digitizer and a computer-assisted image analysis system. An inverse relationship between CSA and SDH activity of neurons was observed in all groups of rats. No change in mean CSA or mean SDH activity or in the size distribution of neurons was observed following spaceflight or recovery. However, there was a selective decrease in the SDH activity of neurons with soma CSA between 500 and 800 microns2 in the flight rats, and this effect persisted for at least 9 days following return to 1 g. It remains to be determined whether the selected population of motoneurons or the specific motor pools affected by spaceflight may be restricted to specific muscles.

short duration↗

Early Detection of Drought Stress in Durum Wheat Using Hyperspectral Imaging and Photosystem Sensing

Wheat, being the third largest U.S. crop and the principal food grain, faces significant risks from climate extremes such as drought. This necessitates identifying and developing methods for early water-stress detection to prevent yield loss and improve water-use efficiency. This study investigates the potential of hyperspectral imaging to detect the early stages of drought stress in wheat. The goal is to utilize this technology as a tool for screening and selecting drought-tolerant wheat genotypes in breeding programs. Additionally, this research aims to systematically evaluate the effectiveness of various existing sensors and methods for detecting early stages of water stress. The experiment was conducted in a durum wheat experimental field trial in Maricopa, Arizona, in the spring of 2019 and included well-watered and water-limited treatments of a panel of 224 replicated durum wheat genotypes. Spectral indices derived from hyperspectral imagery were compared against other plant-level indicators of water stress such as Photosystem II (PSII) and relative water content (RWC) data derived from proximal sensors. Our findings showed a 12% drop in photosynthetic activity in the most affected genotypes when compared to the least affected. The Leaf Water Vegetation Index 1 (LWVI1) highlighted differences between drought-resistant and drought-susceptible genotypes. Drought-resistant genotypes retained 43.36% more water in leaves under well-watered conditions compared to water-limited conditions, while drought-susceptible genotypes retained only 15.69% more. The LWVI1 and LWVI2 indices, aligned with the RWC measurements, revealed a strong inverse correlation in the susceptible genotypes, underscoring their heightened sensitivity to water stress in earlier stages. Several genotypes previously classified based on their drought resistance showed spectral indices deviating from expectations. Results from this research can aid farmers in improving crop yields by informing early management practices. Moreover, this research offers wheat breeders insights into the selection of drought-tolerant genotypes, a requirement that is becoming increasingly important as weather patterns continue to change.

Roy, Bishal (ORCID:0000000199125505)↗

Nanoscale Artificial Plasmonic Lattice in Self-Assembled Vertically Aligned Nitride-Metal Hybrid Metamaterials

Nanoscale metamaterials exhibit extraordinary optical properties and are proposed for various technological applications. Here, a new class of novel nanoscale two–phase hybrid metamaterials is achieved by combining two major classes of traditional plasmonic materials, metals (e.g., Au) and transition metal nitrides (e.g., TaN, TiN, and ZrN) in an epitaxial thin film form via the vertically aligned nanocomposite platform. By properly controlling the nucleation of the two phases, the nanoscale artificial plasmonic lattices (APLs) consisting of highly ordered hexagonal close packed Au nanopillars in a TaN matrix are demonstrated. More specifically, uniform Au nanopillars with an average diameter of 3 nm are embedded in epitaxial TaN platform and thus form highly 3D ordered APL nanoscale metamaterials. Novel optical properties include highly anisotropic reflectance, obvious nonlinear optical properties indicating inversion symmetry breaking of the hybrid material, large permittivity tuning and negative permittivity response over a broad wavelength regime, and superior mechanical strength and ductility. Furthermore, the study demonstrates the novelty of the new hybrid plasmonic scheme with great potentials in versatile material selection, and, tunable APL spacing and pillar dimension, all important steps toward future designable hybrid plasmonic materials.

36 MATERIALS SCIENCE↗

Low-temperature conversion of methane to methanol on CeO x /Cu 2 O catalysts: Water controlled activation of the C–H Bond

Here, an inverse CeO 2 /Cu 2 O/Cu(111) catalyst is able to activate methane at room temperature producing C, CH x fragments and CO x species on the oxide surface. The addition of water to the system leads to a drastic change in the selectivity of methane activation yielding only adsorbed CH x fragments. At a temperature of 450 K, in the presence of water, a CH 4 → CH 3 OH catalytic transformation occurs with a high selectivity. OH groups formed by the dissociation of water saturate the catalyst surface, removing sites that could decompose CH x fragments, and generating centers on which methane can directly interact to yield methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

$\testit{d}$-wave superconductivity and Bogoliubov-Fermi surfaces in Rarita-Schwinger-Weyl semimetals

In this work, we uncover the properties of complex tensor ($\textit{d}$-wave) superconducting order in three-dimensional Rarita-Schwinger-Weyl semimetals that host pseudospin-$\frac{3}{2}$ fermions at a fourfold linear band-crossing point. Although the general theory of $\textit{d}$-wave order was originally developed for materials displaying quadratic band touching, it directly applies to the case of semimetals with linear dispersion, several candidate compounds of which have been discovered experimentally very recently. The spin-$\frac{3}{2}$ nature of the fermions allows for the formation of spin-2 Cooper pairs which may be described by a complex second-rank tensor order parameter. In the case of linear dispersion, for the chemical potential at the Fermi point and at strong coupling, the energetically preferred superconducting state is the uniaxial nematic state, which preserves time-reversal symmetry and provides a full (anisotropic) gap for quasiparticle excitations. In contrast, at a finite chemical potential, we find that the usual weak-coupling instability is toward the “cyclic state,” well known from the studies of multicomponent Bose-Einstein condensates, which breaks time-reversal symmetry maximally, has vanishing average value of angular momentum, and features 16 small Bogoliubov-Fermi surfaces. The Rarita-Schwinger-Weyl semimetals provide therefore the first example of weakly coupled, three-dimensional, isotropic $\textit{d}$-wave superconductors where the $\textit{d}$-wave superconducting phase is uniquely selected by the quartic expansion of the mean-field free energy, and is not afflicted by the accidental degeneracy first noticed by Mermin over 40 years ago. We discuss the appearance and stability of the Bogoliubov-Fermi surfaces in absence of inversion symmetry in the electronic Hamiltonian, as in the case at hand.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-beam γ-ray spectroscopy of 32 Mg via direct reactions

Background: The nucleus 32 Mg (N=20 and Z=12) plays a central role in the so-called “island of inversion,” where in the ground states sd-shell neutrons are promoted to the fp-shell orbitals across the shell gap, resulting in the disappearance of the canonical neutron magic number N=20. Purpose: The primary goals of this work are to extend the level scheme of 32Mg, provide spin-parity assignments to excited states, and discuss the microscopic structure of each state through comparisons with theoretical calculations. Method: In-beam γ-ray spectroscopy of 32 Mg was performed using two direct-reaction probes: one-neutron (two-proton) knockout reactions on 33 Mg ( 34 Si). Final-state exclusive cross sections and parallel momentum distributions were extracted from the experimental data and compared with eikonal-based reaction model calculations combined with shell-model overlap functions. Results: Owing to the remarkable selectivity of the one-neutron and two-proton knockout reactions, a significantly updated level scheme for 32 Mg, which exhibits negative-parity intruder and positive-parity normal states, was constructed. The experimental results were confronted with four different nuclear structure models. Conclusions: In some of these models, different aspects of 32 Mg and the transition into the island of inversion are well described. However, unexplained discrepancies remain, and, even with the help of these state-of-the-art theoretical approaches, the structure of this key nucleus is not yet fully captured.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Adjustment for Nonlinear Applications in the OECD/NEA WPNCS SG14 Benchmark—A Bayesian Inverse UQ-Based Approach for Data Assimilation

The Organisation for Economic Co-operation and Development Working Party on Nuclear Criticality Safety has proposed a benchmark exercise to assess the performance of current nuclear data adjustment techniques applied to nonlinear applications and experiments with low correlation to applications. This work introduces Bayesian inverse uncertainty quantification (IUQ) employing scientific machine learning surrogate models as a method for nuclear data adjustments in this benchmark, and compares IUQ to the more traditional methods of generalized linear least squares (GLLS) and Monte Carlo Bayes (MOCABA). Posterior predictions from IUQ showed agreement with GLLS and MOCABA for linear applications. Here, when comparing GLLS, MOCABA, and IUQ posterior predictions to computed model responses using adjusted parameters, we observe that the GLLS predictions failed to replicate the computed response distributions for nonlinear applications, while MOCABA showed near agreement, and IUQ used the computed model responses directly. We also discuss observations on why experiments with low correlation to applications can be informative to nuclear data adjustments and identify some properties useful in selecting experiments for inclusion in nuclear data adjustment. Performance in this benchmark indicates potential for Bayesian IUQ in nuclear data adjustments.

Bayesian calibration↗

Surface modification of cellulose acetate membrane using thermal annealing to enhance produced water treatment

This study is performed primarily to investigate the effect of surface modification of cellulose acetate using thermal annealing on the enhancement of membrane performance for produced water treatment. In this study, Cellulose Acetate membranes were casted using dry/wet phase inversion technique. The effect of additive and post-treatment using thermal annealing on the membrane surface were examined for produced water treatment. Therma annealing was subjected to membrane surface at 60 and 70 °C for 5, 10 and 15 second, respectively. Membrane characterizations were done using membrane flux and rejection with produced water as a feed, Scanning Electron Microscopy (SEM) and Fourier Transform Infra Red (FTIR) analysis. Experimental results showed that asymmetric cellulose acetate membrane can be made by dry/wet phase inversion technique. The results from the Scanning Electron Microscopy (FESEM) analysis was also confirmed that polyethylene glycol as additivie in dope solution and thermal annealing was affected the morphology and membrane performance for produced water treatment, respectively. Scanning electron microscopy micrographs showed that the selective layer and the substructure of membrane became denser and more compact after the thermal annealing processes. Therefore, membrane rejection was significantly increased while the flux was slighty decreased, respectively. The best membrane performance is obtained on the composition of 18 wt % cellulose acetate, poly ethylene glycol 5 wt% with thermal annealing at 70° C for 15 second.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Admittance-Based Protection Scheme for Microgrids

This paper presents a novel directional protection scheme to address the unique challenges associated with protection during unbalanced faults in a distribution system with high penetration of inverter-based resources. The scheme is based on a superimposed negative sequence admittance method. A coordination approach using a unique inverse-time undervoltage element is also presented. An analysis of the scheme, the detection criteria and the coordination method are performed. Also the impact of inverter-control on the scheme is discussed. Results from extensive simulation using MATLAB/Simulink are presented to show a selective and reliable response of the scheme to unbalanced faults

Opoku, Kwasi↗

An algorithm to compute the sequency ordered Walsh transform

A fast sequency-ordered Walsh transform algorithm is presented; this sequency-ordered fast transform is complementary to the sequency-ordered fast Walsh transform introduced by Manz (1972) and eliminating gray code reordering through a modification of the basic fast Hadamard transform structure. The new algorithm retains the advantages of its complement (it is in place and is its own inverse), while differing in having a decimation-in time structure, accepting data in normal order, and returning the coefficients in bit-reversed sequency order. Applications include estimation of Walsh power spectra for a random process, sequency filtering and computing logical autocorrelations, and selective bit reversing.

Larsen, H.↗

Method of examining microcircuit patterns

Examination of microstructures of LSI and VLSI devices is facilitated by employing a method in which the device is photographed through a darkfield illumination optical microscope and the resulting negative subjected to inverse processing to form a positive on a photographic film. The film is then developed to form photographic prints or transparencies which clearly illustrate the structure of the device. The entire structure of a device may be examined by alternately photographing the device and selectively etching layers of the device in order to expose underlying layers.

Suszko, S. F.↗

Melt Flow Control in the Directional Solidification of Binary Alloys

Our main project objectives are to develop computational techniques based on inverse problem theory that can be used to design directional solidification processes that lead to desired temperature gradient and growth conditions at the freezing front at various levels of gravity. It is known that control of these conditions plays a significant role in the selection of the form and scale of the obtained solidification microstructures. Emphasis is given on the control of the effects of various melt flow mechanisms on the local to the solidification front conditions. The thermal boundary conditions (furnace design) as well as the magnitude and direction of an externally applied magnetic field are the main design variables. We will highlight computational design models for sharp front solidification models and briefly discuss work in progress toward the development of design techniques for multi-phase volume-averaging based solidification models.

Zabaras, Nicholas↗

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗

Gain and offset calibration reduces variation in exposure-dependent SNR among systems with identical digital flat-panel detectors

Purpose: The conditions under which vendor performance criteria for digital radiography systems are obtained do not adequately simulate the conditions of actual clinical imaging with respect to radiographic technique factors, scatter production, and scatter control. Therefore, the relationship between performance under ideal conditions and performance in clinical practice remains unclear. Using data from a large complement of systems in clinical use, the authors sought to develop a method to establish expected performance criteria for digital flat-panel radiography systems with respect to signal-to-noise ratio (SNR) versus detector exposure under clinical conditions for thoracic imaging. Methods: The authors made radiographic exposures of a patient-equivalent chest phantom at 125 kVp and 180 cm source-to-image distance. The mAs value was modified to produce exposures above and below the mAs delivered by automatic exposure control. Exposures measured free-in-air were corrected to the imaging plane by the inverse square law, by the attenuation factor of the phantom, and by the Bucky factor of the grid for the phantom, geometry, and kilovolt peak. SNR was evaluated as the ratio of the mean to the standard deviation (SD) of a region of interest automatically selected in the center of each unprocessed image. Data were acquired from 18 systems, 14 of which were tested both before and after gain and offset calibration. SNR as a function of detector exposure was interpolated using a double logarithmic function to stratify the data into groups of 0.2, 0.5, 1.0, 2.0, and 5.0 mR exposure (1.8, 4.5, 9.0, 18, and 45 {mu}Gy air KERMA) to the detector. Results: The mean SNR at each exposure interval after calibration exhibited linear dependence on the mean SNR before calibration (r{sup 2} = 0.9999). The dependence was greater than unity (m = 1.101 {+-} 0.006), and the difference from unity was statistically significant (p < 0.005). The SD of mean SNR after calibration also exhibited linear dependence on the SD of the mean SNR before calibration (r{sup 2} = 0.9997). This dependence was less than unity (m = 0.822 {+-} 0.008), and the difference from unity was also statistically significant (p < 0.005). Systems were separated into two groups: systems with a precalibration SNR higher than the median SNR (N = 7), and those with a precalibration SNR lower than the median SNR (N = 7). Posthoc analysis was performed to correct for expanded false positive results. After calibration, the authors noted differences in mean SNR within both high and low groups, but these differences were not statistically significant at the 0.05 level. SNR data from four additional systems and one system from those previously tested after replacement of its detector were compared to the 95% confidence intervals (CI) calculated from the postcalibration SNR data. The comparison indicated that four of these five systems were consistent with the CI derived from the previously tested 14 systems after calibration. Two systems from the paired group that remained outside the CI were studied further. One system was remedied with a grid replacement. The nonconformant behavior of the other system was corrected by replacing the image receptor. Conclusions: Exposure-dependent SNR measurements under conditions simulating thoracic imaging allowed us to develop criteria for digital flat-panel imaging systems from a single manufacturer. These measurements were useful in identifying systems with discrepant performance, including one with a defective grid, one with a defective detector, and one that had not been calibrated for gain and offset. The authors also found that the gain and offset calibration reduces variation in exposure-dependent SNR performance among the systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ground-Based Lidar Measurements During the CALIPSO and Twilight Zone (CATZ) Campaign

The CALIPSO and Twilight Zone (CATZ) field campaign was carried out between June 26th and August 29th of 2007 in the multi-state Maryland-Virginia-Pennsylvania region of the U.S. to study aerosol properties and cloud-aerosol interactions during overpasses of the CALIPSO satellite. Field work was conducted on selected days when CALIPSO ground tracks occurred in the region. Ground-based measurements included data from multiple Cimel sunphotometers that were placed at intervals along a segment of the CALIPSO ground-track. These measurements provided sky radiance and AOD measurements to enable joints inversions and comparisons with CALIPSO retrievals. As part of this activity, four ground-based lidars provided backscatter measurements (at 523 nm) in the region. Lidars at University of Maryland Baltimore County (Catonsville, MD) and Goddard Space Flight Center (Greenbelt, MD) provided continuous data during the campaign, while two micro-pulse lidar (MPL) systems were temporarily stationed at various field locations directly on CALIPSO ground-tracks. As a result, thirteen on-track ground-based lidar observations were obtained from eight different locations in the region. In some cases, nighttime CALIPSO coincident measurements were also obtained. In most studies reported to date, ground-based lidar validation efforts for CALIPSO rely on systems that are at fixed locations some distance away from the satellite ground-track. The CATZ ground-based lidar data provide an opportunity to examine vertical structure properties of aerosols and clouds both on and off-track simultaneously during a CALIPSO overpass. A table of available ground-based lidar measurements during this campaign will be presented, along with example backscatter imagery for a number of coincident cases with CALIPSO. Results indicate that even for a ground-based measurements directly on-track, comparisons can still pose a challenge due to the differing spatio-temporal properties of the ground and satellite observations. The multiple-lidar data during the CATZ campaign is expected to provide additional information on regional aerosol and cloud dynamics for give overpass, and enable a more realistic assessment of ground-to-satellite correlations. Future work is anticipated to finalize calibrated lidar backscatter profiles and utilization of wind trajectory information to further enable comparisons to CALIPS data.

Berkoff, Timothy↗

Optical wavelength converters for photonic band gap microcircuits

We demonstrate compact optical wavelength conversion architecture for picosecond laser pulses and data streams within photonic band gap waveguides. These multimode waveguides are seeded with resonantly driven, inhomogeneously broadened, distributions of quantum dots whose optical transition center frequency is placed near a sharp discontinuity in the local (electromagnetic) density of states (LDOS). This discontinuity is provided by a cutoff in one of the waveguide modes. Wavelength conversion of an optical pulse propagating in the single-mode spectral range of the waveguide, near the LDOS jump, is provided by a steady-state holding field with frequency matched to the center frequency of the quantum dot distribution. In the absence of an incident laser pulse, the holding field is absorbed by the quantum dots. When the incident pulse intensity is sufficient to cause population inversion of a suitable fraction of the quantum dots, the holding field is amplified and the incident pulse profile is imprinted on to the holding field, leading to wavelength conversion in the range of 3-20 nm at wavelengths near 1.5 {mu}m. Larger wavelength shifts typically require higher power levels for operation (milliwatt scale) but enable conversion of shorter (picosecond) pulses. Small wavelength shifts typically require narrower distribution of quantum dot resonance frequencies. Using finite-difference time-domain simulations, we show that an optical pulse (Gaussian in time) can create another equivalent optical pulse with either higher or lower center frequency inside the photonic band gap of the structure. Optical pulses of a given center frequency can also be selectively amplified or absorbed depending on the coincident arrival of another laser pulse with different center frequency, enabling all-optical logic operations within a multiwavelength-channel optical circuit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗