Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “probability density function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The effects of transmitter/receiver clock time base instability on coherent communication system performance

The purpose of this paper is to present a model and associated analysis of the deleterious effects which both transmitter and receiver data clock time-base instability have on bit error probability. The types of time-base instability modeled and analyzed include bit jitter (epoch jitter), bit jitter rate (time interval jitter) and data asymmetry. The bit error probability is determined as a function of the statistical characteristics of the time-base instability, the data transition density, the signal-to-noise ratio in the bit rate bandwidth and the mechanizations of both the data bit detector and bit synchronizer. Numerical results are provided.

Chie, C. M.↗

Shield sizing and response equations

A consolidated list is presented of meteoroid debris shield equations which have been given in the referenced memorandums. In some cases, equations have been updated; thus, this memorandum supersedes reference 1. The equations are presented in two parts: (1) shield sizing equations which are used to produce preliminary estimates of shielding weights; and (2) response equations to describe the impact conditions (projectile size as a function of velocity, density, and impact angle) causing failure of a given shield that are to be used for probability analyses (such as in the modified BUMPER program). Specific equations are given that are applicable for the following types of shields: aluminum Whipple shields; Nextel multishock (MS) shields; and mesh double bumper (MDB) shields. These equations will be updated in the future as warranted by the results of additional HVI tests, analyses, and shield modeling.

Christiansen, Eric L.↗

Theoretical calculations of ion acceleration in the vicinity of comet Giacobini-Zinner

Ionization of cometary neutral molecules produces ions which are picked up by the solar wind. The cometary ion pickup process for comet Giacobini-Zinner is studied in two ways: (1) with a test particle method in which trajectories are numerically calculated for several thousand ions whose initial locations were chosen randomly with probability proportional to the neutral density and (2) with a quasi-linear diffusion model. The cometary ion distribution function was calculated with the test particle model at several locations upstream of the bow shock and for several types of magnetic fluctuations (or waves). These waves were allowed to propagate in both directions along the magnetic field at the Alfven speed. Both pitch angle scattering and energy diffusion are evident in the derived ion distributions. The monochromatic waves result in less ion acceleration than turbulent fluctuations with about the same amplitude. The calculated ion distribution functions are in reasonable agreement with the distributions measured in the vicinity of comet Giacobini-Zinner in 1985 by particle detectors on the ICE spacecraft when the ratio of power in sunward propagating Alfven waves to the power in antisunward propagating waves is assumed to lie between about 20% and 50%. However, the quasi-linear diffusion model results agree best with the measured distribution functions when the power ratio is only about 3 percent.

Mckenzie, M. L.↗

Observation of a driver gas-tangential discontinuity

A complete analysis of an interplanetary disturbance of Nov. 19, 1970 using the Apollo 12-SIDE (Suprathermal Ion Detector Experiment) is presented. The SIDE detectors were pointing at 26.3 degrees from the normal solar-wind direction during the observations. The data were least-squares fitted (using a parabolic hypersurface approximation) to a convected Maxwell-Boltzmann distribution function. The results of the fit combined with two other experiments showed a drastic change in the wind speed (from an steady 352 km/sec down to 219 km/sec), direction, and temperature. Except for a delta-function increase at the onset, the density remained constant. There was a considerable enhancement in the abundance of He and probably of heavier elements. The interplanetary magnetic field exhibited a jump of 21 gamma with a change in latitude from -56 to -76 degrees in solar ecliptic coordinates. It is concluded that the disturbance was due to the driver gas-tangential discontinuity of a solar flare-induced shock wave. The characteristic of the tangential discontinuity fit well with theoretical prediction.

Medrano, R. A.↗

The effects of transmitter/receiver clock time-base instability on coherent communication system performance

The purpose of this paper is to present a model and associated analysis of the deleterious effects which both transmitter and receiver data clock time-base instability have on bit-error probability. The types of time-base instability modeled and analyzed include what is commonly referred to as bit jitter (epoch jitter), bit-jitter rate (time interval jitter), and data asymmetry. The bit-error probability is determined as a function of the statistical characteristics of the time-base instability, the data-transition density, the signal-to-noise ratio in the bit-rate bandwidth and the mechanizations of both the data-bit detector and bit synchronizer. The latter is manifested through the bit synchronizer's natural frequency and loop-damping parameters. Numerical results which indicate the sensitivity of the system bit-error rate to various parameters of the model are provided.

Chie, C. M.↗

Far-Infrared Water Line Emissions from Circumstellar Outflows

We have modeled the far-infrared water line emission expected from circumstellar outflows from oxygen-rich late-type stars, as a function of the mass-loss rate and the terminal outflow velocity. For each mass-loss rate and terminal outflow velocity considered, we computed self-consistently the gas density, temperature, outflow velocity, and water abundance as a function of distance from the star. We then used an escape probability method to solve for the equilibrium level populations of 80 rotational states of water and thereby obtained predictions for the luminosity of a large number of far-infrared rotational transitions of water. In common with previous models, our model predicts that water will be copiously produced in the warm circumstellar gas and that water rotational emission will dominate the radiative cooling. However, our use of a realistic radiative cooling function for water leads to a lower gas temperature than that predicted in previous models. Our predictions for the far-infrared water line luminosities are consequently significantly smaller than those obtained in previous studies. Observations to be carried out by the Infrared Space Observatory will provide a crucial test of the models presented here.

Chen, Wesley↗

Canopy Spectral Invariants: Application to Classification of Forest Types from Hyperspectral Data - Part 2

Many studies have been conducted to demonstrate the ability of hyperspectral data to discriminate plant dominant species. Most of them have employed the use of empirically based techniques, which are site specific, requires some initial training based on characteristics of known leaf and/or canopy spectra and therefore may not be extendable to operational use or adapted to changing or unknown land cover. In this paper we propose a physically based approach for separation of dominant forest type using hyperspectral data. The radiative transfer theory of canopy spectral invariants underlies the approach, which facilitates parameterization of the canopy reflectance in terms of the leaf spectral scattering and two spectrally invariant and structurally varying variables - recollision and directional escape probabilities. The methodology is based on the idea of retrieving spectrally invariant parameters from hyperspectral data first, and then relating their values to structural characteristics of three-dimensional canopy structure. Theoretical and empirical analyses of ground and airborne data acquired by Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) over two sites in New England, USA, suggest that the canopy spectral invariants convey information about canopy structure at both the macro- and micro-scales. The total escape probability (one minus recollision probability) varies as a power function with the exponent related to the number of nested hierarchical levels present in the pixel. Its base is a geometrical mean of the local total escape probabilities and accounts for the cumulative effect of canopy structure over a wide range of scales. The ratio of the directional to the total escape probability becomes independent of the number of hierarchical levels and is a function of the canopy structure at the macro-scale such as tree spatial distribution, crown shape and size, within-crown foliage density and ground cover. These properties allow for the natural separation of dominant forest classes based on the location of points on the total escape probability vs the ratio log-log plane.

Schull, M. A.↗

Application of remote sensing for fishery resources assessment and monitoring

The author has identified the following significant results. The distribution and abundance of white marlin correlated with the chlorophyll, water temperature, and Secchi depth sea truth measurements. Results of correlation analyses for dolphin were inconclusive. Predicition models for white marlin were developed using stepwise multiple regression and discriminant function analysis techniques which demonstrated a potential for increasing the probability of game fishing success. The S190A and B imagery was density sliced/color enhanced with white marlin location superimposed on the image, but no density/white marlin relationship could be established.

Savastano, K. J.↗

Particle sizes in Comet Bennett /1970 II/

The particle size distribution in the coma and tail of Comet Bennett has been determined by several methods, each sensitive to a particular size range. It is confirmed that a minimum value of the particle density, size, and radiation pressure efficiency function exists at about .00003 to .00010 g/sq cm. The existence of such a cutoff is probably due to the decreasing radiation pressure efficiency for particles smaller than the wavelength of the light being scattered. An exact determination of this cutoff may allow identification of the particle type.

O'Dell, C. R.↗

Cross Sections for Electron Impact Excitation of Astrophysically Abundant Atoms and Ions

Electron collisional excitation rates and transition probabilities are important for computing electron temperatures and densities, ionization equilibria, and for deriving elemental abundances from emission lines formed in the collisional and photoionized astrophysical plasmas. Accurate representation of target wave functions that properly account for the important correlation and relaxation effects and inclusion of coupling effects including coupling to the continuum are essential components of a reliable collision calculation. Non-orthogonal orbitals technique in multiconfiguration Hartree-Fock approach is used to calculate oscillator strengths and transition probabilities. The effect of coupling to the continuum spectrum is included through the use of pseudostates which are chosen to account for most of the dipole polarizabilities of target states. The B-spline basis is used in the R-matrix approach to calculate electron excitation collision strengths and rates. Results for oscillator strengths and electron excitation collision strengths for transitions in N I, O I, O II, O IV, S X and Fe XIV have been produced

Tayal, S. S.↗

On the bound of first excursion probability

Method has been developed to improve the lower bound of the first excursion probability that can apply to the problem with either constant or time-dependent barriers. The method requires knowledge of the joint density function of the random process at two arbitrary instants.

Yang, J. N.↗

Estimating maximum instantaneous distortion from inlet total pressure rms and PSD measurements

An inexpensive method is developed to determine the extreme values of instantaneous inlet distortion. This method also provides insight into the basic mechanics of unsteady inlet flow and the associated engine reaction. The analysis is based on fundamental fluid dynamics and statistical methods to provide an understanding of the turbulent inlet flow and quantitatively relate the rms level and power spectral density (PSD) function of the measured time variant total pressure fluctuations to the strength and size of the low pressure regions. The most probable extreme value of the instantaneous distortion is then synthesized from this information in conjunction with the steady state distortion. Results of the analysis show the extreme values to be dependent upon the steady state distortion, the measured turbulence rms level and PSD function, the time on point, and the engine response characteristics. Analytical projections of instantaneous distortion are presented and compared with data obtained by a conventional, highly time correlated, 40 probe instantaneous pressure measurement system.

Melick, H. C., Jr.↗

Bayes estimation on parameters of the single-class classifier

Normal procedures used for designing a Bayes classifier to classify wheat as the major crop of interest require not only training samples of wheat but also those of nonwheat. Therefore, ground truth must be available for the class of interest plus all confusion classes. The single-class Bayes classifier classifies data into the class of interest or the class 'other' but requires training samples only from the class of interest. This paper will present a procedure for Bayes estimation on the mean vector, covariance matrix, and a priori probability of the single-class classifier using labeled samples from the class of interest and unlabeled samples drawn from the mixture density function.

Lin, G. C.↗

Spline Classification Methods

The use of spline functions in the development of classification algorithms is discussed. A method is formulated for producing spline approximations to univariate density functions when each density function is described by a histogram of measurements. The resulting approximations are then incorporated into a Bayesian classification procedure for which the probability of misclassification can be readily computed. Some preliminary numerical results are presented to illustrate the method.

Guseman, L. F., Jr.↗

Radiative Cooling of Warm Molecular Gas

We consider the radiative cooling of warm (T >= 100 K), fully molecular astrophysical gas by rotational and vibrational transitions of the molecules H2O, CO, and H2. Using an escape probability method to solve for the molecular level populations, we have obtained the cooling rate for each molecule as a function of temperature, density, and an optical depth parameter. A four-parameter expression proves useful in fitting the run of cooling rate with density for any fixed values of the temperature and optical depth parameter. We identify the various cooling mechanisms which are dominant in different regions of the astrophysically relevant parameter space. Given the assumption that water is very abundant in warm regions of the interstellar medium, H2O rotational transitions are found to dominate the cooling of warm interstellar gas over a wide portion of the parameter space considered. While chemical models for the interstellar medium make the strong prediction that water will be produced copiously at temperatures above a few hundred degrees, our assumption of a high water abundance has yet to be tested observationally. The Infrared Space Observatory and the Submillimeter Wave Astronomy Satellite will prove ideal instruments for testing whether water is indeed an important coolant of interstellar and circumstellar gas.

Neufeld, David A.↗

A Synthesis of Fluid Dynamics and Quantum Chemistry for the Design of Nanoelectronics

In 1959, during a famous lecture entitled "There's Plenty of Room at the Bottom", Richard Feynman focused on the startling technical possibilities that would exist at the limit of miniaturization, that being atomically precise devices with dimensions in the nanometer range. A nanometer is both a convenient unit of length for medium to large sized molecules, and the root of the name of the new interdisciplinary field of "nanotechnology". Essentially, "nanoelectronics" denotes the goal of shrinking electronic devices, such as diodes and transistors, as well as integrated circuits of such devices that can perform logical operations, down to dimensions in the range of 100 nanometers. The thirty-year hiatus in the development of nanotechnology can figuratively be seen as a period of waiting for the bottom-up and atomically precise construction skills of synthetic chemistry to meet the top-down reductionist aspirations of device physics. The sub-nanometer domain of nineteenth-century classical chemistry has steadily grown, and state-of-the-art supramolecular chemistry can achieve atomic precision in non-repeating molecular assemblies of the size desired for nanotechnology. For nanoelectronics in particular, a basic understanding of the electron transport properties of molecules must also be developed. Quantum chemistry provides powerful computational methods that can accurately predict the properties of small to medium sized molecules on a desktop workstation, and those of large molecules if one has access to a supercomputer. Of the many properties of a molecule that quantum chemistry routinely predicts, the ability to carry a current is one that had not even been considered until recently. "Currently", there is a controversy over just how to define this key property. Reminiscent of the situation in high-Tc superconductivity, much of the difficulty arises from the different models that are used to simplify the complex electronic structure of real materials. A model-independent approach has been proposed, that sacrifices the plentiful molecular orbitals and Bloch functions of conventional approaches, for a single three-dimensional observable quantity, the electron momentum density Pi(sub rho). This quantity is simply the probability of any electron having momentum rho, multiplied by the total number of electrons in the system (the position of the electron is uncertain). We have explored the utility of this new approach in providing a fundamental understanding of the electron transport properties of molecules that have provi been nominated as candidates for components in the design of nanoelectronics; phenylene-ethynylene oligomers. Some of the molecular systems that have been studied are sketched below.

MacDougall, Preston J.↗

High-accuracy computation of Delta V magnitude probability densities - Preliminary remarks

This paper describes an algorithm for the high accuracy computation of some statistical quantities of the magnitude of a random trajectory correction maneuver (TCM). The trajectory correction velocity increment Delta V is assumed to be a three-component random vector with each component being a normally distributed random scalar having a possibly nonzero mean. Knowledge of the statitiscal properties of the magnitude of a random TCM is important in the planning and execution of maneuver strategies for deep-space missions such as Galileo. The current algorithm involves the numerical integration of a set of differential equations. This approach allows the computation of density functions for specific Delta V magnitude distributions to high accuracy without first having to generate large numbers of random samples. Possible applications of the algorithm to maneuver planning, planetary quarantine evaluation, and guidance success probability calculations are described.

Chadwick, C.↗