Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coupled Gel/Seeded Growth of Cs2AgBiBr6 Single Crystals for Radiation Detection

Abstract— The all-inorganic lead free Cs2AgBiBr6 perovskite represents a highly promising environment-friendly radiation detector material. The first attempt to grow Cs2AgBiBr6 single crystals using the unique gel growth method is reported in this study. This technique enables controlled reagent diffusion in a gel medium at room temperature, fostering the growth of visible single crystals. It offers advantages over conventional methods, leading to fewer equilibrium and non-equilibrium defects and simplified execution. Interestingly, the as-grown crystals exhibited variations in size and colors within the gel matrix, indicating the influence of Bi solutes in Bi-poor and Bi-rich Cs2AgBiBr6 crystals. Once the crystals were confirmed by powder xray diffraction, a series of comprehensive material characterizations was performed. The resistivity of Cs2AgBiBr6 single crystals was measured at 1.12x107 Ω•cm. Trap density analysis yielded a value of 2.82 x1010 cm-3. The charge carrier mobility was determined to be 32.9 cm2V-1S-1, suggesting the suitability for radiation detector applications. Additional growth optimization is going on and further characterization will be reported during the presentation. Our work helps accelerate the development of lead-free perovskite materials toward radiation detector applications.

James, Ralph B.↗
DOE OSTI2025

Detector pixel calibration of time-of-flight neutron diffractometers accelerated by machine learning

Modern time-of-flight neutron diffractometers at spallation neutron source are equipped with two dimensional detectors with fine pixelations. The flight path of neutrons from the moderator to the sample and to the detector needs to be precisely calibrated at detector pixel level using standard powders so the diffraction data from all the detector pixels can be correctly time-focused to produce high resolution diffraction peaks. The number of pixels can reach to millions which makes a single-pixel calibration process time-consuming, or even impossible, with conventional fitting routine. Here we presented a machine learning aided calibration process via a “training and predict” process by training machine learning models with the relations between the individual pixel time-of-flight diffraction pattern and fitted diffraction constant. The training models take a portion of the available pixels to predict the diffraction constants precisely and rapidly for massive pixel diffraction patterns.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1969

The lanthanum-rhodium system.

La-Rh system study by powder X ray diffraction, metallographic and differential thermal analysis, constructing equilibrium diagram and determining crystal structure data

Raman, A.↗
NASA NTRS1970

The Nd-Rh system

Phase diagram of Nd-Rh system determined by powder X ray diffraction, metallography and differential thermal analysis methods

Raman, A.↗
NASA NTRS1991

Processing Bi-Pb-Sr-Ca-Cu-O superconductors from amorphous state

The bismuth based high T sub c superconductors can be processed via an amorphous Bi-Pb-Sr-Ca-Cu oxide. The amorphous oxides were prepared by melting the constituent powders in an alumina crucible at 1200 C in air followed by pouring the liquid onto an aluminum plate, and rapidly pressing with a second plate. In the amorphous state, no crystalline phase was identified in the powder x ray diffraction pattern of the quenched materials. After heat treatment at high temperature the amorphous materials crystallized into a glass ceramic containing a large fraction of the Bi2Sr2Ca2Cu3O(x) phase T sub c = 110 K. The processing method, crystallization, and results of dc electrical resistivity and ac magnetic susceptibility measurements are discussed.

Chiang, C. K.↗
NASA NTRS1995

Thermal emission from particulate surfaces: A comparison of scattering models with measured spectra

Emissivity spectra of particulate mineral samples are highly dependent on particle size when that size is comparable to the wavelength of light emitted (5-50 micrometers for the midinfrared). Proper geologic interpretation of data from planetary infrared spectrometers will require that these particle size effects be well understood. To address this issue, samples of quartz powders were produced with narrow, well-characterized particle size distributions. Mean particle diameters in these samples ranged from 15 to 227 micrometers. Emission spectra of these powders allow the first detailed comparison of the complex spectral variations with particle size observed in laboratory data with the predictions of radiative transfer models. Four such models are considered here. Hapke's relectance theory (converted to emissivity via Kirchoff's law) is the first model tested. Hapke's more recently published emission theory is also employed. The third model, the 'Mie/Conel' model, uses Mie single scattering with a two-stream approximation for multiple scattering. This model, like the first, is a converted reflec- tance model. Mie scattering assumes particles are both spherical and well separated, which is not true for the quartz powders, but includes diffraction effects. The fourth model uses the Mie solution for single scattering by spheres and inputs those results into the multiple scattering formalism of Hapke's emission theory. The results of the four models are considered in relation to the values of the optical constants n and k. We have grouped these as class 1 (k large), class 2 (k moderate, n is approximately 2), class 3 (k small, n is approximately 2), and class 4 (k small, n is approximately 1). In general, the Mie/Hapke hybrid model does best at predicting variations with grain size. In particular, it predicts changes of the correct pattern, although incorrect magnitude, for class 1 bands, where large increases in emissivity with decreasing grain size are observed. This model also does an excellent job on moderate (class 2) and very weak and intraband (class 3) regions, and correctly predicts the emission maximum and its invariance with grain size near the Christiansen frequency (class 4). The Mie/Hapke hybrid model also has the fewest free parameters of the four models examined, while maintaining the most physical treatment of the radiative transfer. The Mie/Conel model performs as well as the Mie/Hapke hybrid model in strong bands (class 1) but does not accurately model the behavior of moderate (class 2) and very weak (class 3) bands.

Moersch, J. E.↗
NASA NTRS2004

Disordered Zinc in Zn4Sb3 with Phonon-Glass and Electron-Crystal Thermoelectric Properties

By converting waste heat into electricity, thermoelectric generators could be an important part of the solution to today's energy challenges. The compound Zn4Sb3 is one of the most efficient thermoelectric materials known. Its high efficiency results from an extraordinarily low thermal conductivity in conjunction with the electronic structure of a heavily doped semiconductor. Previous structural studies have been unable to explain this unusual combination of properties. Here, we show through a comprehensive structural analysis using single-crystal X-ray and powder-synchrotron-radiation diffraction methods, that both the electronic and thermal properties of Zn4Sb3 can be understood in terms of unique structural features that have been previously overlooked. The identification of Sb3- ions and Sb-2(4-) dimers reveals that Zn4Sb3 is a valence semiconductor with the ideal stoichiometry Zn13Sb10. In addition, the structure contains significant disorder, with zinc atoms distributed over multiple positions. The discovery of glass-like interstitial sites uncovers a highly effective mechanism for reducing thermal conductivity. Thus Zn4Sb3 is in many ways an ideal 'phonon glass, electron crystal' thermoelectric material.

phases↗
DOE OSTI2024

Recycling of additively printed anisotropic Nd-Fe-B bonded magnets

A high potential cost-effective and environmentally friendly method has been applied for recycling anisotropic Nd-Fe-B bonded magnets. Waste additively printed Hydrogenation-Disproportionation-Desorption-Recombination (HDDR) Nd-Fe-B anisotropic bonded magnet was pulverized into composite powder containing Nd-Fe-B particles and nylon binder through cryomilling at a liquid nitrogen temperature (~77 K) under Ar inert atmosphere. Then, the cryomilled composite powder was warm compacted into a bonded magnet. Further, the magnetic particles were aligned during post-compaction annealing under a magnetic field of 30 kOe. The recycled bonded magnets have a higher density (3% enhancement), but slightly inferior magnetic properties compared to the original magnets, i.e., the magnetic remanence, coercivity and maximum energy product are reduced by 2%, 3% and 8%, respectively. The scanning electron microscopy revealed that some HDDR Nd-Fe-B powder crumbled into fine particles during cryomilling. Powder X-ray diffraction showed a small amount of Nd-oxide impurity in the cryomilled powder. The slightly deteriorated magnetic properties are ascribed to the oxidation of Nd-Fe-B particles due to formation of fresh fracture surface during cryomilling. The approach enables the direct reuse of end-of-life bonded magnets in an economical and environmentally friendly way.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Organizing Chaos: Boosting Thermoelectric Properties by Ordering the Clathrate Framework of Ba 8 Cu 16 As 30

The type I clathrate, Ba 8 Cu 16 As 30 , is reinvestigated and found to have a low-temperature polymorph mP 108-Ba 8 Cu 16 As 30 with ordered Cu and As sites. In situ temperature-dependent powder X-ray diffraction experiments guided synthetic efforts toward the synthesis of the ordered monoclinic ( mP 108) and disordered cubic ( cP 54) polymorphs with high phase purity. While a transition from mP 108-Ba 8 Cu 16 As 30 to cP 54-Ba 8 Cu 16 As 30 is not directly observed, cP 54-Ba 8 Cu 16 As 30 is stabilized through quenching from high temperatures and is confirmed through high-resolution synchrotron powder X-ray diffraction. Further, combined theoretical predictions and experimental observations of the thermoelectric properties of both polymorphs reveal that the ordering of Cu and As atoms in the clathrate framework simultaneously enhances the Seebeck coefficient and electronic conductivity by increasing the hole effective mass and reducing the electronic scattering events. Consequently, the zT of mP 108-Ba 8 Cu 16 As 30 reaches a maximum of 0.2 at 575 K, an order of magnitude higher than that of cP 54-Ba 8 Cu 16 As 30 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Formation of Ba 3 Nb 0.75 Mn 2.25 O 9 -6H during thermochemical reduction of Ba 4 NbMn 3 O 12 -12R

The resurgence of interest in hydrogen-related technologies has stimulated new studies aimed at advancing lesser-developed water-splitting processes, such as solar thermochemical hydrogen production (STCH). Progress in STCH has been largely hindered by a lack of new materials able to efficiently split water at a rate comparable to ceria under identical experimental conditions. BaCe 0.25 Mn 0.75 O 3 (BCM) recently demonstrated enhanced hydrogen production over ceria and has the potential to further our understanding of two-step thermochemical cycles. A significant feature of the 12R hexagonal perovskite structure of BCM is the tendency to, in part, form a 6H polytype at high temperatures and reducing environments ( i.e. , during the first step of the thermochemical cycle), which may serve to mitigate degradation of the complex oxide. An analogous compound, namely BaNb 0.25 Mn 0.75 O 3 (BNM) with a 12R structure was synthesized and displays nearly complete conversion to the 6H structure under identical reaction conditions as BCM. The structure of the BNM-6H polytype was determined from Rietveld refinement of synchrotron powder X-ray diffraction data and is presented within the context of the previously established BCM-6H structure.

08 HYDROGEN↗
DOE OSTI2025

Li 21 Ge 8 P 3 S 34 : New Lithium Superionic Conductor with Unprecedented Structural Type

Abstract Lithium superionic conductors are pivotal for enabling all‐solid‐state batteries, which aim to replace liquid electrolytes and enhance safety. Herein, we report the discovery of an unprecedented lithium superionic conductor, Li 21 Ge 8 P 3 S 34 , featuring a novel structural type and a new composition in the Li–Ge–P–S system. This material exhibits high lithium ionic conductivity of approximately 1.0 mS cm −1 at 303 K with a low activation energy of 0.20(1) eV. It's unique crystal structure was elucidated using three‐dimensional electron diffraction (3D ED) and further refined through combined powder X‐ray and neutron diffraction analyses. The structure consists of alternating two‐dimensional slabs: one of corner‐sharing GeS 4 tetrahedra and the other of isolated PS 4 tetrahedra, enabling efficient lithium‐ion transport through a tetrahedrally interconnected network of 1D, 2D, and 3D diffusion pathways. This distinctive structural motif provides a novel design strategy for next‐generation solid electrolytes, broadening the structural landscape of lithium superionic conductors. With further advancements in compositional tuning and interfacial engineering, Li 21 Ge 8 P 3 S 34 could contribute to the development of high‐performance all‐solid‐state batteries.

Chemistry↗
DOE OSTI2022

Synthesis and Characterization of Silicon Carbide Ceramic Composites with CeO 2 Powder

This study pioneers the fabrication and characterization of silicon carbide (SiC) containing cerium dioxide (CeO 2 ). CeO 2 powder was tested as a surrogate for actinide oxide waste forms such as uranium dioxide (UO 2 ) and plutonium dioxide (PuO 2 ). Several syntheses were evaluated with varying amounts of preceramic polymer (SMP-10 resin) and CeO 2 containing either SiC fiber, carbon fiber, or no fibers. Scanning electron microscopy (SEM) was used to characterize morphology and compositional differences, and energy-dispersive x-ray spectroscopy (EDS) was used to provide semiquantitative elemental analysis. In addition, each sample was characterized by density, powder x-ray diffraction (pXRD), and Raman spectroscopy. Samples containing nearly more than four times CeO 2 powder than SMP-10 resin by mass had the best properties. This research establishes a unique synthesis for SiC containing high concentrations of CeO 2 powder to illustrate how it may be managed as a potential waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

A Polar Magnetic and Insulating Double Corundum Oxide: Mn2MnSbO6 with Ordered Mn(II) and Mn(III) Ions

A new magnetic insulator Mn2MnSbO6 with a polar crystal structure and an ordered Mn2+ and Mn3+ arrangement was synthesized under a high pressure of 7.5 GPa and 1300 degrees C. The crystal structure of Mn2MnSbO6, investigated by synchrotron powder X-ray diffraction, was found to be isomorphous with that of Ni3TeO6-type, space group R3. The non-centrosymmetric structure was confirmed by the second-harmonic generation measurements. The X-ray absorption near-edge spectroscopy measurement confirmed the nominal oxidation states of Mn22+Mn3+SbO6. Magnetic measurements indicate that Mn2MnSbO6 orders antiferromagnetically below 44 K and undergoes a field-induced spin-flop transition at 5 K. First-principles calculations indicate an antiferromagnetic ground state with up/up/up/down/down/down (uuuddd) spin configuration of the six crystallographically unique Mn ions in the c-axis doubled magnetic structure. The density functional theory calculations also substantiate the experimentally observed charge ordering of the Mn2+/Mn3+ ions and the insulating behavior due to a bandgap of 0.52 eV. To the best of our knowledge, this is the first double corundum oxide containing Jahn-Teller active Mn3+ ions.

Feng, Hai L.↗
DOE OSTI2023

Probing the thermal decomposition of plutonium (III) oxalate with IR and Raman spectroscopy, X-ray diffraction, and electron microscopy

The thermal decomposition of Pu(III) oxalate was analyzed by Raman microspectroscopy, infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. These data show that crystalline Pu 2 (C 2 O 4 ) 3 •9H 2 O progressively loses water and oxalate ligands as it is heated, which leads to a decrease in long-range lattice ordering, though minimal changes are observed in gross crystalline morphology. The onset of PuO 2 formation was observed between 200 - 250 °C. Thermal decomposition of oxalate ligands leads to the formation of CO 2 and plutonium oxalate-carbonate moieties, which had not been observed in previously published thermogravimetric measurements of Pu(III) oxalate. Formation of plutonium oxalate-carbonate moieties is believed to be associated with a change in the plutonium oxidation state from 3+ to 4+, which occurs prior to PuO 2 formation. The data provided herein demonstrate the rich spectroscopic nature of a rather underexplored, and technologically relevant, plutonium system. Ideally these results will further future investigations into the Pu(III) oxalate system both experimentally and computationally.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Test and Delivery of the Chemin Mineralogical Instrument for Mars Science Laboratory

The CheMin mineralogical instrument on MSL will return quantitative powder X-ray diffraction data (XRD) and qualitative X-ray fluorescence data (XRF; 14<Z<92) from scooped soil samples and drilled rock powders collected on the Mars surface. The geometry of the source, sample, and detector is shown. A transmission geometry was chosen so that diffracted intensities in the low-20 region (5-15 deg), important for phyllosilicate identification, could be detected.

Blake, D. F.↗
DOE OSTI2021

Crystal Structure and Properties of Layered Pnictides BaCuSi2Pn3 (Pn = P, As)

Two novel layered compounds BaCuSi 2 Pn 3 (Pn = P, As) adopting new structure types are reported. As revealed by single-crystal X-ray diffraction, both compounds are composed of unique Cu–Si–Pn layers featuring CuPn 3 and Si 2 Pn 6 structural motifs found in other archetypal pnictide materials. The stacking of the isostructural Cu–Si–Pn layers is different for phosphide and arsenide compounds. Synthesis from elements aided by in situ synchrotron powder X-ray diffraction resulted in the obtainment of bulk powders with a minimized amount of admixtures. Experimentally measured physical properties of BaCuSi 2 As 3 unexpectedly showed metal-like behavior at temperatures above 15 K, despite the fact that density functional theory calculations predict a small band gap of 0.4 eV. BaCuSi 2 As 3 exhibits ultralow thermal conductivity, which can be explained by the combination of a layered crystal structure with alternating covalent and ionic bonding, which feature rattling of Cu atoms similar to that in tetrahedrites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Near-IR Luminescence Tuning in a Series of Chalcogenophene Carboxylate-Decorated Neodymium Dimers

Here, the solvothermal synthesis of a series of Nd dimers decorated with various chalcogenophene carboxylates and 2,2':6',2"-terpyridine of the general formula, [Nd 2 (µ-XC 5 H 3 O 2 ) 2 (XC 5 H 3 O 2 ) 4 (N 3 C 15 H 11 ) 2 (H 2 O) 2 ] where X = O, S, Se, and Te, is reported. The solid-state structures were characterized using single-crystal X-ray diffraction (scXRD) and all the complexes are isomorphous, despite substitution of the heterocyclic chalcogen; phase purity was confirmed via powder X-ray diffraction (pXRD). Vibrational spectroscopy was collected and correlations between chalcogen identity and the binding strength of the carboxylate groups of the chalcogenophene ligands with each metal center were shown to be independent of chalcogen identity. All four complexes displayed Nd(III)-based near-IR luminescence and exhibited ligand-sensitized emission. Varying the chalcogenophene chromophore enabled tuning of the sensitizing triplet state energy level, as evidenced by an 8-fold increase in the sensitization of the TeCA-decorated dimer relative to the other chalcogenophene congeners. This behavior was rationalized by comparing the Nd(III) acceptor and ligand donor states across the series. The donor triplet state of each ligand was estimated via low-temperature (77 K) phosphorescence measurements from 1:1 mixtures with Gd(III); these were found to be 24,631 cm –1 for furan-2-carboxylic acid (FCA), 23,764 cm –1 for thiophene-2-carboxylic acid (TCA), 22,548 cm –1 for selenophene-2-carboxylic acid (SeCA), and 21,186 cm –1 for tellurophene-2-carboxylic acid (TeCA). The greater sensitization efficiency of TeCA is the result of well-matched ligand donor and metal acceptor levels and thus suppression of nonradiative back-energy transfer. More broadly, triplet energy level information for these ligands serves as a guide for future application to other target metals based on the electronic properties necessary to effect efficient sensitization.

Coordination Chemistry↗