Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Probing the Reverse Shock in an Oxygen-Rich Supernova Remnant

The aim of this proposal was to examine the O VI emission at three positions around the X-ray bright ring of the remnant in order to investigate the relation between the O VI emission, the X-ray O VII and O VIII emission, and the optical [O III] emission, and how these vary around the rim of the remnant. So far, only one Far Ultraviolet Spectroscopic Explorer (FUSE) pointing at the remnant has been performed, together with the background pointing needed to subtract the diffuse scattered light from nearby O stars. The data were recalibrated using the CalFUSE calibration pipeline, but the emission is faint enough that hand processing will be needed for this pointing to optimize the extraction. Rereduction of the data is underway. A postdoctoral fellow has also been hired, and in part she will assist with the analysis.

Sonneborn, George↗
DOE OSTI2026

Distinct Melt Infusion Architectures of Antiperovskite Solid Electrolytes

Antiperovskite solid electrolytes are an emerging class of lithium‐ion conductors distinguished by their unusually low melting points, enabling scalable, low‐temperature processing routes not accessible to most solid electrolytes. In this work, we synthesize phase‐pure chloride (Cl), bromide (Br), and mixed halide (ClBr) variants of antiperovskites and investigate their ionic conductivities in both powder and hot‐pressed forms. Hot pressing significantly enhances conductivity across all compositions, while energy‐dispersive X‐ray spectroscopy (EDS) of the mixed halide system reveals halide surface migration during densification. We further investigate the melt‐infiltration behavior of these electrolytes into substrates relevant to solid‐state battery architectures, including Al and Cu current collectors, conventional NMC and LFP cathodes, and a foamed NMC cathode with a highly porous architecture. The foamed cathode enables deep and uniform electrolyte penetration, highlighting the role of electrode architecture in facilitating melt infiltration. Across all substrates, electrolyte halide chemistry strongly influences wetting behavior, penetration depth, and resulting microstructural morphology. Together, these results establish clear processing–structure relationships for melt‐infiltrated antiperovskite solid electrolytes and demonstrate how electrolyte chemistry and electrode architecture govern interfacial morphology during integration, providing practical guidelines for processing and structural design in solid‐state battery systems.

antiperovskite↗
DOE OSTI2021

Tightly-coupled camera/LiDAR integration for point cloud generation from GNSS/INS-assisted UAV mapping systems

Unmanned aerial vehicles (UAVs) equipped with integrated global navigation satellite systems/inertial navigation systems (GNSS/INS) together with cameras and/or LiDAR sensors are being widely used for topographic mapping in a variety of applications such as precision agriculture, coastal monitoring, and archaeological documentation. Integration of image-based and LiDAR point clouds can provide a comprehensive 3D model of the area of interest. For such integration, ensuring a good alignment between data from the different sources is critical. Although many works have been conducted on this topic, there is still a need for a rigorous integration approach that minimizes the discrepancy between camera and LiDAR data caused by inaccurate system calibration parameters and/or trajectory artifacts. This study proposes an automated tightly-coupled camera/LiDAR integration workflow for GNSS/INS-assisted UAV systems. The proposed strategy is conducted in three main steps. First, an image-based point cloud is generated using a LiDAR/GNSS/INS-assisted structure from motion (SfM) strategy. Then, feature correspondences between image-based and LiDAR point clouds are automatically identified. Finally, an integrated-bundle adjustment procedure including image points, LiDAR raw measurements, and GNSS/INS information is conducted to minimize the discrepancy between point clouds from different sensors while estimating system calibration parameters and refining the trajectory information. The proposed SfM strategy and integration framework are evaluated using five datasets. The SfM results show that using LiDAR data can facilitate feature matching and further increase the number of reconstructed 3D points. The experimental results also illustrate that the developed automated camera/LiDAR integration strategy is capable of accurately estimating system calibration parameters to achieve good alignment among camera/LiDAR data from single/multiple systems. Finally, an absolute accuracy in the range of 3–5 cm is achieved for the image/LiDAR point clouds after the integration process.

42 ENGINEERING↗
DOE OSTI2025

Hybrid Bismuth Halide with Rich Polymorphism and Second Harmonic Generation Response

Hybrid structures have emerged as a promising class of optical materials, due to their ability to couple the robustness of inorganic and the tunability of organic compounds. However, their application in nonlinear optics (NLO) remains limited, largely due to underexplored factors that drive the formation of noncentrosymmetric structures and NLO property characterization. In this work, we explore the formation, structural and temperature polymorphism, and optical properties of the (Et 3 NH) 3 Bi 2 Br 9 composition, which crystallizes as either noncentrosymmetric or centrosymmetric polymorph. Structural analysis showed that the alignment of [Bi 2 Br 9 ] 3– units dictates the symmetry of phases, as well as the nonlinear optical properties, with the triclinic polymorph exhibiting a second harmonic generation (SHG) response both in visible and IR regions (1.29 × KH 2 PO 4 and 0.08 × AgGaS 2 ). Thermal analysis reveals polymorphic phase transitions and low melting points, making them melt-processable and ionic liquid candidates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device

A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system’s rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Low-temperature gas-phase formation of cyclopentadiene and its role in the formation of aromatics in the interstellar medium

The cyclopentadiene (C 5 H 6 ) molecule has emerged as a molecular building block of nonplanar polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanostructures such as corannulene (C 20 H 10 ), nanobowls (C 40 H 10 ), and fullerenes (C 60 ) in deep space. However, the underlying elementary gas-phase processes synthesizing cyclopentadiene from acyclic hydrocarbon precursors have remained elusive. Here, by merging crossed molecular beam experiments with rate coefficient calculations and comprehensive astrochemical modeling, we afford persuasive testimony on an unconventional low-temperature cyclization pathway to cyclopentadiene from acyclic precursors through the reaction of the simplest diatomic organic radical—methylidyne (CH)—with 1,3-butadiene (C 4 H 6 ) representing main route to cyclopentadiene observed in TaurusMolecular Cloud. This facile route provides potential solution for the incorporation of the cyclopentadiene moiety in complex aromatic systems via bottom–up molecular mass growth processes and offers an entry point to the low-temperature chemistry in deep space leading eventually to nonplanar PAHs in our carbonaceous Universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Random Forest Prediction of Crystal Structure from Electron Diffraction Patterns

Transmission electron microscopy (TEM) diffraction patterns are regularly used to determine the structure of crystalline materials. Electron diffraction is the most common method to solve for unknown or partially known crystal structures, as it provides direct and interpretable feedback on the orientation of crystal grains under the beam [1]. However, it remains a challenge to determine the crystal structure of a new material or even a new phase of an existing material. Analysis of such materials commonly requires manual exploration and comparison with simulated diffraction patterns. This is often a time consuming process with no obvious start point when many similar structures are possible, and this method cannot be used to determine crystal structure or orientation from structures not included in the diffraction libraries. Therefore, we have developed a machine learning model to determine the crystal structure of a material from its electron diffraction pattern.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Abundance analysis of APOGEE spectra for 58 metal-poor stars from the bulge spheroid

The central part of the Galaxy hosts a multitude of stellar populations, including the spheroidal bulge stars, stars moved to the bulge through secular evolution of the bar, inner halo, inner thick disc, inner thin disc, as well as debris from past accretion events. We identified a sample of 58 candidate stars belonging to the stellar population of the spheroidal bulge, and analyse their abundances. The present calculations of Mg, Ca, and Si lines are in agreement with the ASPCAP abundances, whereas abundances of C, N, O, and Ce are re-examined. We find normal α-element enhancements in oxygen, similar to magnesium, Si, and Ca abundances, which are typical of other bulge stars surveyed in the optical in Baade’s Window. The enhancement of [O/Fe] in these stars suggests that they do not belong to accreted debris. No spread in N abundances is found, and none of the sample stars is N-rich, indicating that these stars are not second generation stars originated in globular clusters. Ce instead is enhanced in the sample stars, which points to an s-process origin such as due to enrichment from early generations of massive fast rotating stars, the so-called spinstars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Online learning of quadratic manifolds from streaming data for nonlinear dimensionality reduction and nonlinear model reduction

Here, this work introduces an online greedy method for constructing quadratic manifolds from streaming data, designed to enable in situ analysis of numerical simulation data on the Petabyte scale. Unlike traditional batch methods, which require all data to be available upfront and take multiple passes over the data, the proposed online greedy method incrementally updates quadratic manifolds in one pass as data points are received, eliminating the need for expensive disk input/output operations as well as storing and loading data points once they have been processed. A range of numerical examples demonstrate that the online greedy method learns accurate quadratic manifold embeddings while being capable of processing data that far exceed common disk input/output capabilities and volumes as well as main-memory sizes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device

A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.

Thomson scattering, real-time, LHD, plasma diagnos↗
DOE OSTI2020

Characterization Report for the MP-1 Experiment Fabrication Campaign

This report covers the results of MP 1 fuel characterization analysis to provide a detailed understanding of the as-fabricated fuel that would be irradiated in the MP 1 (Mini-Plate 1) experiment. The work was performed at Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), and Los Alamos National Laboratory (LANL). Characterization of the as-fabricated fuel was performed in accordance with Characterization Plan for the Fabrication of U 10Mo for the MP 1 Experiment, hereinafter the MP 1 Characterization Plan (MAQP 2016). Under the MP 1 Characterization Plan, fuel foils at different points in the foil fabrication process (e.g., hot rolled annealed, cold rolled annealed) were studied to understand the effect of various thermomechanical processes on the fuel microstructure. Samples were sent to each of the three organizations so that testing and analysis could be performed independently using similar equipment and a standardized set of measurement and analysis procedures. The MP 1 experiment will provide an opportunity to understand the effects of processing conditions on the final fuel microstructure, to compare independently obtained results, and achieve a three-way validation. PNNL characterized 28 uranium–10 wt% molybdenum (U 10Mo) samples. Six pieces/specimens from each sample/foil were sectioned, in accordance with the MP 1 Characterization Plan. Similarly, INL and LANL also examined 24 and 17 U 10Mo specimens, respectively. These total 69 samples consist of six types of MP 1 characterization foils fabricated by Babcock and Wilcox Technologies (BWXT) from ingots produced by the Y-12 National Security Complex: • 0.047 in.-thick hot-rolled and annealed samples with and without Zr layers • 0.02 in.-thick cold-rolled and annealed samples with and without Zr layers • 0.01 in.-thick cold-rolled and annealed samples with and without Zr layers. Microstructure, chemical composition, carbide morphology, U 10Mo foil thickness, Zr thickness, mechanical properties (microhardness), and density were evaluated in both longitudinal and transverse directions for foils of the three different thicknesses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Size and Time-Resolved Automated Aerosol Sampling Field Campaign Report

To improve the understanding of the impacts of the vertical distribution of aerosol chemical composition on radiative forcing of aerosol, we performed a detailed physicochemical characterization of aerosol particles sampled during ARM deployment of the tethered balloon system at two ARM sites. We used multi-modal microscopy/spectroscopy techniques and advanced mass spectrometry platforms for the analysis of particles. We found variations in size-resolved aerosol composition at different altitudes. We also observed changes in aerosol composition during different seasons. Some of our observations at ARM’s Oliktok Point, Alaska site suggest cloud processing of aerosol while sampling in clouds, below clouds, and above clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Offshore Wind Energy Basics: Navigating Offshore Wind Energy Decision-Making Processes [Slides]

This webinar will provide a high-level summary of decision-making processes for siting and permitting, with a focus on the points at which local stakeholders can meaningfully engage in these processes. It will differentiate itself from other offshore wind webinars by presenting information relevant to a national audience (i.e., it will not be state specific) that helps stakeholders to "connect the dots" across agencies and processes. It will provide neutral, fact-based information from NREL staff, as well as from relevant staff at the federal, state, and local levels. This webinar will provide a helpful foundation for webinar #3 in this series, which will highlight opportunities for community engagement in the offshore wind development process more broadly, including but not limited to the regulatory processes covered in this webinar.

17 WIND ENERGY↗
DOE OSTI2023

Deciphering Fingerprints of Stellar Nucleosynthesis Through Nuclear Reaction Rate Measurements and Isotopic Analyses of Stardust

Microscopic stardust grains, found in trace amounts in primitive meteorites, afford a unique opportunity to study stellar nucleosynthesis in the laboratory by measuring their heavy element isotopic compositions. Applying LLNL’s state-of-the art material characterization capabilities to these micrometer-sized grains yields large new datasets with unprecedented precision. However, the astrophysical models necessary to interpret the isotopic record require improved nuclear physics data to constrain stellar nucleosynthesis conditions. For example, the branch point in the s-process path at 95 Zr controls the relative amounts of heavier nuclides but is poorly understood. We conducted a coordinated effort across disciplines to combine a new determination of the neutron capture cross section of 95 Zr with the laboratory analysis of hundreds of stardust grains to yield a view into stellar interiors. We developed new methods to quantify multiple isotopic systems simultaneously (e.g., Zr, Ba, and W) in stardust grains and improved the determination of the neutron capture cross section of unstable 95 Zr via the surrogate reaction method. This interdisciplinary approach is allowing us to fill gaps in our understanding of the environments in which elements are produced while enhancing LLNL’s experimental and theoretical capabilities relevant to nuclear threat reduction missions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Deciphering Fingerprints of Stellar Nucleosynthesis Through Nuclear Reaction Rate Measurements and Isotopic Analyses of Stardust

Microscopic stardust grains, found in trace amounts in primitive meteorites, afford a unique opportunity to study stellar nucleosynthesis in the laboratory by measuring their heavy element isotopic compositions. Applying LLNL’s state-of-the art material characterization capabilities to these micrometer-sized grains yields large new datasets with unprecedented precision. However, the astrophysical models necessary to interpret the isotopic record require improved nuclear physics data to constrain stellar nucleosynthesis conditions. For example, the branch point in the s-process path at 95 Zr controls the relative amounts of heavier nuclides but is poorly understood. We conducted a coordinated effort across disciplines to combine a new determination of the neutron capture cross section of 95 Zr with the laboratory analysis of hundreds of stardust grains to yield a view into stellar interiors. We developed new methods to quantify multiple isotopic systems simultaneously (e.g., Zr, Ba, and W) in stardust grains and improved the determination of the neutron capture cross section of unstable 95 Zr via the surrogate reaction method. This interdisciplinary approach is allowing us to fill gaps in our understanding of the environments in which elements are produced while enhancing LLNL’s experimental and theoretical capabilities relevant to nuclear threat reduction missions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Characterization Report for the MP-1 Experiment Fabrication Campaign (Rev.1)

This report covers the results of MP 1 fuel characterization analysis to provide a detailed understanding of the as-fabricated fuel that would be irradiated in the MP 1 (Mini-Plate 1) experiment. The work was performed at Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), and Los Alamos National Laboratory (LANL). Characterization of the as-fabricated fuel was performed in accordance with Characterization Plan for the Fabrication of U 10Mo for the MP 1 Experiment, hereinafter the MP 1 Characterization Plan (MAQP 2016). Under the MP 1 Characterization Plan, fuel foils at different points in the foil fabrication process (e.g., hot rolled annealed, cold rolled annealed) were studied to understand the effect of various thermomechanical processes on the fuel microstructure. Samples were sent to each of the three organizations so that testing and analysis could be performed independently using similar equipment and a standardized set of measurement and analysis procedures. The MP 1 experiment will provide an opportunity to understand the effects of processing conditions on the final fuel microstructure, to compare independently obtained results, and achieve a three-way validation. PNNL characterized 28 uranium–10 wt% molybdenum (U 10Mo) samples. Six pieces/specimens from each sample/foil were sectioned, in accordance with the MP 1 Characterization Plan. Similarly, INL and LANL also examined 24 and 17 U 10Mo specimens, respectively. These total 69 samples consist of six types of MP 1 characterization foils fabricated by Babcock and Wilcox Technologies (BWXT) from ingots produced by the Y-12 National Security Complex: (a.) 0.047 in.-thick hot-rolled and annealed samples with and without Zr layers; (b.) 0.02 in.-thick cold-rolled and annealed samples with and without Zr layers; and (c.) 0.01 in.-thick cold-rolled and annealed samples with and without Zr layers. Microstructure, chemical composition, carbide morphology, U 10Mo foil thickness, Zr thickness, mechanical properties (microhardness), and density were evaluated in both longitudinal and transverse directions for foils of the three different thicknesses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Scalable Thin Light-Emitting Diode (LED) Light Sheet Platform

The goal of the Scalable Thin Light-Emitting Diode (LED) Light Sheet Platform project is to derisk the manufacturing scalability for a high chip count heterogeneous smart lighting platform, with the potential to enable significant energy savings through dynamic directional light control and custom. Specifically, the project derisks the scalability of a disruptive new computer controlled microassembly fabrication process SRI International is developing, to address fundamental cost barriers to mass production of high chip count systems. This is key for enabling mass adoption and thus maximum societal energy savings impact. The LED light sheet technology is a smart illumination platform that can be applied to lighting, signage, and display. It has features and a form factor similar to bendable or conformal OLED light sheets but uses more efficient LEDs with a remote phosphor layer that is very close to the LED to deliver a luminous efficacy that exceeds 125 lumen/Watt and enable > 50% Lighting Application Efficiency (LAE) energy savings. During Budget Period 1 (BP1), all of the BP1 milestones were successfully completed: (M2.0.1) Design demonstrator details that will meet the final project goals, (M6.1.1) Show lighting output model can predict illuminance, spatial, spectral distribution for specific light-sheet designs and use case, (M3.2.1) Automated loading supports 200 chip arrays, and (M3.3.1) Finish first interconnect process run for 200 chip array. The BP1 Go/No-Go Decision Point (G/NG 1) 200 chip demonstrator sample was in the process of final assembly and test at the end of BP1 on December 31, 2023. The objective was successfully achieved on January 16, 2024, when a wired 200-chip sample underwent confirmation testing that demonstrated a 93.75% first pass electrical yield that successfully exceeded the 75% first-pass electrical yield BP1 G/NG requirement. In addition, all 93.75% of the sample devices lit up, further demonstrating the ability to assemble and transfer small LED chips without damaging their functionality.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Integrating Cyber-Informed Engineering into Enterprise Risk Management

This document supports the application of Cyber-Informed Engineering (CIE) within the context of Enterprise Risk Management (ERM) to enhance cyber-resilience. It highlights that many critical infrastructure organizations use ERM to manage business risks and emphasizes the importance of evaluating critical systems and assets. The proposed approach can be adopted independently of formal ERM processes and offers a starting point for integrating CIE alongside existing or new ERM practices. Both CIE and ERM are iterative, and their alignment fosters continuous improvement and supports the engineering and operations cultures of an organization.

42 ENGINEERING↗