Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point group”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

First principles investigation of dopants and defect complexes in CdSe$_x$Te$_{1-x}$

Se alloying is a common approach to improve the performance of CdTe solar cells by tuning the bandgap, defect levels, and carrier density. A fundamental understanding of these improvements, specifically the effect of Se alloying on the behavior of defects and dopants in CdTe, remains unclear. Here, in this work, we present a density functional theory (DFT) study of point defect energetics in CdTe and CdSe x Te 1-x with x = 0.25, leading to a comparison of how native defects, dopants (As and Cu), impurities (Cl and O), and related defect complexes behave in CdTe vs CdSe x Te 1-x . Our calculations, performed by combining semi-local and nonlocal hybrid functionals, show a general lowering of the formation energies of native defects as well as substitutional defects formed by As and Cl upon Se addition. For successful p-type doping with As, destabilizing Cl-based defects in the CdSeTe lattice would be essential. We find evidence for some low-energy defect complexes of As, Cl, and O in CdSe 0.25 Te 0.75 . The computed defect formation energies further enable estimates of temperature-dependent defect concentrations and self-consistent Fermi levels. A comparison of defect energetics with the energies of impurity phases reveals that As, Cu, Cl, and O overwhelmingly prefer being segregated to unwanted As 2 O 5 , AsCl 3 , Cd 2 AsCl 2 , and CuO x phases rather than remain at defect sites, but such segregation is less likely to happen in CdSe 0.25 Te 0.75 than in CdTe. Overall, our work presents a list of likely defects and complexes in CdTe and Se-incorporated CdTe, paving the way to explain and mitigate limited dopant activation in experimental observations.

CdTe↗

Knowledge, data and interests: Challenges in participation of diverse stakeholders in HIA

Stakeholder participation is considered an integral part of HIA. However, the challenges that participation implies in a multi-disciplinary and multi-ethnic society are less studied. This paper presents the manifestations of the multiplicity of sectors and population groups in HIA and discusses the challenges that such diversity imposes. Specifically, there is no common ground between participants, as their positions entail contradictory knowledge regarding the current situation, reliance on distinct data and conflicting interests. This entails usage of multiple professional and ethnic languages, disagreements regarding the definition of health and prioritizing health issues in HIA, and divergent perceptions of risk. These differences between participants are embedded culturally, socially, individually and, maybe most importantly, professionally. This complex picture of diverse stakeholder attributes is grounded in a case study of stakeholder participation in HIA, regarding zoning of a hazardous industry site in Israel. The implication is that participatory HIAs should address the multiplicity of stakeholders and types of knowledge, data and interests in a more comprehensive way. - Highlights: Black-Right-Pointing-Pointer This paper analyses challenges in participation of diverse stakeholders in HIA. Black-Right-Pointing-Pointer The multiplicity of disciplines and population groups raises fundamental challenges. Black-Right-Pointing-Pointer Stakeholders possess distinct and often contradictory knowledge, data and interests. Black-Right-Pointing-Pointer They speak different languages, and differ on approaches to health and risk perceptions. Black-Right-Pointing-Pointer Substantial amendments to diverse participation are needed, in HIA and generally.

54 ENVIRONMENTAL SCIENCES↗

Aeritalia Space Systems Group, Turin, Italy

Aeritalia has been involved in European space programs since the early 1960's. Space activities grew to the point that in 1984 Aeritalia established a separate Space Systems Group (SSG), located in Turin. Today, SSG is involved in dozens of projects, some of them jointly with NASA and U.S. aerospace companies. Here, several of the major projects, such as the Tethered Satellite system, HIPPARCOS, Columbus Pressurized Module, Italian Research Interim Stage, and others are briefly described.

Donlan, Vincent↗

Effects of adaptive task allocation on monitoring of automated systems

The effects of adaptive task allocation on monitoring for automation failure during multitask flight simulation were examined. Participants monitored an automated engine status task while simultaneously performing tracking and fuel management tasks over three 30-min sessions. Two methods of adaptive task allocation, both involving temporary return of the automated engine status task to the human operator ("human control"), were examined as a possible countermeasure to monitoring inefficiency. For the model-based adaptive group, the engine status task was allocated to all participants in the middle of the second session for 10 min, following which it was again returned to automation control. The same occurred for the performance-based adaptive group, but only if an individual participant's monitoring performance up to that point did not meet a specified criterion. For the nonadaptive control groups, the engine status task remained automated throughout the experiment. All groups had low probabilities of detection of automation failures for the first 40 min spent with automation. However, following the 10-min intervening period of human control, both adaptive groups detected significantly more automation failures during the subsequent blocks under automation control. The results show that adaptive task allocation can enhance monitoring of automated systems. Both model-based and performance-based allocation improved monitoring of automation. Implications for the design of automated systems are discussed.

Task Performance and Analysis↗

Synthesis of MOF having hydroxyl functional side groups and optimization of activation process for the maximization of its BET surface area

To accomplish the postsynthetic modification of MOF with organic-metal precursors (OMPs) described in our previous researches more efficiently, synthesis of MOF (HCC-2) possessing relatively larger pore size as well as higher number of hydroxyl functional side groups per its base unit than those of HCC-1 has been successfully conducted via adopting 1,4-di-(4-carboxy-2,6-dihydroxyphenyl)benzene as an organic ligand and Zn(NO{sub 3}){sub 2}{center_dot}6H{sub 2}O as a metal source, respectively. Also, optimization about the Activation process of HCC-2 was performed to maximize its BET (Brunauer-Emmett-Teller) surface area which was proved to be proportional to the number of exposed active sites on which its postsynthetic modification occurred. However, Activation process having been validated to be so effective with the acquirement of highly-purified HCC-1 (CO{sub 2} supercritical drying step followed by vacuum drying step) was less satisfactory with the case of HCC-2. This might be attributed to relatively higher hydrophilicity and bulkier molecular structure of organic ligand of HCC-2. However, it was readily settled by simple modification of above Activation process. Moreover, indispensable residues composed of both DMF and its thermally degraded derivatives which were chemically attached via coordination bond with hydroxyl functionalities even after Activation process III might enable their H{sub 2} adsorption properties to be seriously debased compared to that of IRMOF-16 having no hydroxyl functionalities. - Graphical abstract: Synthesis of new-structured MOF (HCC-2) simultaneously possessing relatively larger pore size as well as higher number of hydroxyl functional side groups per its base unit at the same time than those of HCC-1 has been performed via adopting 1,4-di-(4-carboxy-2,6-dihydroxyphenyl)benzene as an organic ligand and Zn(NO{sub 3}){sub 2}{center_dot}6H{sub 2}O as a metal source, respectively. Also, the optimization of activation process for HCC-2 was conducted to maximize its BET surface area while the suitability of this activation process was proved via SEM, TGA, EA, XRF, and PSD. Being compared with the crystal structures of IRMOF-16 and HCC-1 via XRD and FT-IR analysis, the crystal structure of HCC-2 having an identical chemical structure except the introduction of four hydroxyl functional side groups on the backbone of its organic ligand showed no noticeable change. Specifically, HCC-2 was established as a cubic structure with each axis of about 21.5 A. Moreover, H{sub 2} adsorption isotherms for these HCCs were attained to ultimately examine that hydroxyl functionalities inside their pores have any influence on their H{sub 2} adsorption properties. Highlights: Black-Right-Pointing-Pointer HCC-2 having higher number of hydroxyl groups than that of HCC-1 was prepared. Black-Right-Pointing-Pointer The optimization of activation process for HCC-2 was studied. Black-Right-Pointing-Pointer The crystal structure of HCC-2 was a cubic-shaped structure with each axis of 21.5 A. Black-Right-Pointing-Pointer -OH functionalities on HCCs had negative influence on their H{sub 2} adsorption abilities. Black-Right-Pointing-Pointer This might be due to impurities rigidly attached to their functional side groups.

36 MATERIALS SCIENCE↗

Explorations of new selenites of the group IIIA and IVA metals

Systematic explorations of new phases in the Ga{sup III}/In{sup III}/Ge{sup IV}-Se{sup IV}-O systems by hydrothermal syntheses or solid-state reactions at high-temperature led to six new ternary compounds, namely, M{sub 2}Se{sub 2}O{sub 7} (M=Ga 1, In 2), M(OH)(SeO{sub 3}) (M=Ga 3, In 4), {alpha}-Ge(SeO{sub 3}){sub 2}5 and {beta}-Ge(SeO{sub 3}){sub 2}6. Ga{sub 2}Se{sub 2}O{sub 7}1 displays a 3D open framework composed of 2D gallium oxide layers being further bridged and capped by SeO{sub 3} groups. In{sub 2}Se{sub 2}O{sub 7}2 features a 3D indium oxide framework formed by corner- and edge- sharing InO{sub 6} octahedra with SeO{sub 3} groups attached on the cavities and the 8-member ring tunnels of the structure. The isostructural of M(OH)(SeO{sub 3}) (M=Ga 3, In 4) exhibit a 2D metal selenite layer composed of 1D edge-sharing MO{sub 6} octahedral chains that are interconnected by SeO{sub 3} groups. {alpha}-Ge(SeO{sub 3}){sub 2} (P2{sub 1}/n) 5 displays a 3D open framework with 1D 8-member ring tunnels along the a-axis while {beta}-Ge(SeO{sub 3}){sub 2} (Pa-3) 6 exhibits a condensed 3D network. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Up to now, selenites of the group IIIA and IVA metals are still rare. Black-Right-Pointing-Pointer Hydrothermal or solid state reactions yielded six new compounds in this system. Black-Right-Pointing-Pointer They are M{sub 2}Se{sub 2}O{sub 7} (M=Ga, In), M(OH)(SeO{sub 3}) (M=Ga, In), {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2}. Black-Right-Pointing-Pointer They exhibit four different 3D and one 2D structural types. Black-Right-Pointing-Pointer {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2} represent the first examples of germanium selenites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topological defect lines and renormalization group flows in two dimensions

We consider topological defect lines (TDLs) in two-dimensional conformal field theories. Generalizing and encompassing both global symmetries and Verlinde lines, TDLs together with their attached defect operators provide models of fusion categories without braiding. We study the crossing relations of TDLs, discuss their relation to the ’t Hooft anomaly, and use them to constrain renormalization group flows to either conformal critical points or topological quantum field theories (TQFTs). We show that if certain non-invertible TDLs are preserved along a RG flow, then the vacuum cannot be a non-degenerate gapped state. For various massive flows, we determine the infrared TQFTs completely from the consideration of TDLs together with modular invariance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adenosine stress myocardial perfusion imaging in octogenarians: Safety, tolerability, and long-term prognostic implications of hemodynamic response and SPECT-related variables

Background: Evaluation of tolerability, safety, and prognostic implications of adenosine stress myocardial perfusion imaging (MPI) in octogenarians. Methods: 370 octogenarians (49% known coronary artery disease) were studied. Hemodynamic response, MPI-related data, and rest-left ventricular ejection fraction (LVEF) based on echocardiography were registered per patient, and prospective follow-up was performed to document all-cause death (ACD), cardiac death (CD), myocardial infarction (MI), and late revascularization. Results: No deaths or MIs were observed during adenosine infusion or the short-term post-infusion period. 86% of patients were able to tolerate a 6-minute infusion. All side effects terminated spontaneously after infusion cessation, except for one case of pulmonary oedema. After 9.3 years, there were 124 ACDs, 62 CDs, 16 MIs, and 35 revascularizations. Differences between survival curves of summed stress score (SSS)-based risk groups were significant for all end points (P < .001). SSS and LVEF were independent predictors of all end points (P ≤ .01) and lung uptake of cardiac end points. ΔHR <10 bpm (OR = 1.78, P = .004) and inability to increase HR by >10 bpm and decrease systolic blood pressure by >10 mmHg (OR = 2, P = .02) during adenosine infusion were independent predictors of ACD and CD, respectively. Hemodynamic response variables, SSS, and lung uptake provided incremental prognostic value over pre-test data for ACD and CD. Conclusions: In octogenarians, adenosine stress MPI is well tolerated and provides effective long-term risk stratification.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis, characterization and crystal structure of a novel Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O

Graphical abstract: Crystal structure of Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H2O. Highlights: Black-Right-Pointing-Pointer Synthesis of the first Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O. Black-Right-Pointing-Pointer Characterization of the novel compound. Black-Right-Pointing-Pointer Chirality of the space group C2 of compound implies that it is expected to have nonlinear optical (NLO) properties -- Abstract: An inorganic compound formulated as Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O (1) has been isolated by conventional solution method and structurally characterized by single-crystal X-ray diffraction methods, scanning electron microscopy (SEM), powder XRD, IR, UV-vis spectra, and cyclic voltammetry measurements. This compound crystallizes in the monoclinic system, space group C2 with unit a = 19.701 (3) Angstrom-Sign , b = 10.296 (2) Angstrom-Sign , c = 12.134 (4) Angstrom-Sign , {beta} = 106.96 (2) Degree-Sign and Z = 4. The crystal structure of (1) is built up from a Strandberg clusters connected through hydrogen-bonding interactions into a three-dimensional supramolecular network.

36 MATERIALS SCIENCE↗

Epitaxial growth of ultraflat stanene with topological band inversion

Here, two-dimensional (2D) topological materials, including quantum spin/anomalous Hall insulators, have attracted intense research efforts owing to their promise for applications ranging from low-power electronics and high-performance thermoelectrics to fault-tolerant quantum computation. One key challenge is to fabricate topological materials with a large energy gap for room-temperature use. Stanene—the tin counterpart of graphene—is a promising material candidate distinguished by its tunable topological states and sizeable bandgap. Recent experiments have successfully fabricated stanene, but none of them have yet observed topological states. Here we demonstrate the growth of high-quality stanene on Cu(111) by low-temperature molecular beam epitaxy. Importantly, we discovered an unusually ultraflat stanene showing an in-plane s–p band inversion together with a spin–orbit-coupling-induced topological gap (~0.3 eV) at the Γ point, which represents a foremost group-IV ultraflat graphene-like material displaying topological features in experiment. The finding of ultraflat stanene opens opportunities for exploring two-dimensional topological physics and device applications.

36 MATERIALS SCIENCE↗

Metastable supersymmetry breaking vacua from conformal dynamics

We study the scenario that conformal dynamics leads to metastable supersymmetry breaking vacua. At a high energy scale, the superpotential is not R-symmetric, and has a supersymmetric minimum. However, conformal dynamics suppresses several operators along renormalization group flow toward the infrared fixed point. Then we can find an approximately R-symmetric superpotential, which has a metastable supersymmetry breaking vacuum, and the supersymmetric vacuum moves far away from the metastable supersymmetry breaking vacuum. We show a 4D simple model. Furthermore, we can construct 5D models with the same behavior, because of the AdS/CFT dual.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling nuclear processes by Simulink

Modelling and simulation are essential parts in the study of dynamic systems behaviours. In nuclear engineering, modelling and simulation are important to assess the expected results of an experiment before the actual experiment is conducted or in the design of nuclear facilities. In education, modelling can give insight into the dynamic of systems and processes. Most nuclear processes can be described by ordinary or partial differential equations. Efforts expended to solve the equations using analytical or numerical solutions consume time and distract attention from the objectives of modelling itself. This paper presents the use of Simulink, a MATLAB toolbox software that is widely used in control engineering, as a modelling platform for the study of nuclear processes including nuclear reactor behaviours. Starting from the describing equations, Simulink models for heat transfer, radionuclide decay process, delayed neutrons effect, reactor point kinetic equations with delayed neutron groups, and the effect of temperature feedback are used as examples.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Structure family and polymorphous phase transition in the compounds with soft sublattice: Cu{sub 2}Se as an example

Quite a few interesting but controversial phenomena, such as simple chemical composition but complex structures, well-defined high-temperature cubic structure but intriguing phase transition, coexist in Cu{sub 2}Se, originating from the relatively rigid Se framework and “soft” Cu sublattice. However, the electrical transport properties are almost uninfluenced by such complex substructures, which make Cu{sub 2}Se a promising high-performance thermoelectric compound with extremely low thermal conductivity and good power factor. Our work reveals that the crystal structure of Cu{sub 2}Se at the temperature below the phase-transition point (∼400 K) should have a group of candidate structures that all contain a Se-dominated face-centered-cubic-like layered framework but nearly random site occupancy of atoms from the “soft” Cu sublattice. The energy differences among those structures are very low, implying the coexistence of various structures and thus an intrinsic structure complexity with a Se-based framework. Detailed analyses indicate that observed structures should be a random stacking of those representative structure units. The transition energy barriers between each two of those structures are estimated to be zero, leading to a polymorphous phase transition of Cu{sub 2}Se at increasing temperature. Those are all consistent with experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EVOLUTION OF THE GALAXY-DARK MATTER CONNECTION AND THE ASSEMBLY OF GALAXIES IN DARK MATTER HALOS

We present a new model to describe the galaxy-dark matter connection across cosmic time, which unlike the popular subhalo abundance-matching technique is self-consistent in that it takes account of the facts that (1) subhalos are accreted at different times and (2) the properties of satellite galaxies may evolve after accretion. Using observations of galaxy stellar mass functions (SMFs) out to z {approx} 4, the conditional SMF at z {approx} 0.1 obtained from Sloan Digital Sky Survey galaxy group catalogs, and the two-point correlation function (2PCF) of galaxies at z {approx} 0.1 as a function of stellar mass, we constrain the relation between galaxies and dark matter halos over the entire cosmic history from z {approx} 4 to the present. This relation is then used to predict the median assembly histories of different stellar mass components within dark matter halos (central galaxies, satellite galaxies, and halo stars). We also make predictions for the 2PCFs of high-z galaxies as function of stellar mass. Our main findings are the following: (1) Our model reasonably fits all data within the observational uncertainties, indicating that the {Lambda}CDM concordance cosmology is consistent with a wide variety of data regarding the galaxy population across cosmic time. (2) At low-z, the stellar mass of central galaxies increases with halo mass as M{sup 0.3} and M{sup {approx}>4.0} at the massive and low-mass ends, respectively. The ratio M{sub *,c}/M reveals a maximum of {approx}0.03 at a halo mass M {approx} 10{sup 11.8} h{sup -1} M{sub Sun }, much lower than the universal baryon fraction ({approx}0.17). At higher redshifts the maximum in M{sub *,c}/M remains close to {approx}0.03, but shifts to higher halo mass. (3) The inferred timescale for the disruption of satellite galaxies is about the same as the dynamical friction timescale of their subhalos. (4) The stellar mass assembly history of central galaxies is completely decoupled from the assembly history of its host halo; the ratio M{sub *,c}/M initially increases rapidly with time until the halo mass reaches {approx}10{sup 12} h{sup -1} M{sub Sun }, at which point M{sub *,c}/M {approx} 0.03. Once M {approx}> 10{sup 12} h{sup -1} M{sub Sun }, there is little growth in M{sub *,c}, causing the ratio M{sub *,c}/M to decline. In Milky Way (MW)-sized halos more than half of the central stellar mass is assembled at z {approx}< 0.5. (5) In low-mass halos, the accretion of satellite galaxies contributes little to the formation of their central galaxies, indicating that most of their stars must have formed in situ. In massive halos more than half of the stellar mass of the central galaxy has to be formed in situ, and the accretion of satellites can only become significant at z {approx}< 2. (6) The total mass in halo stars is more than twice that of the central galaxy in massive halos, but less than 10% of M{sub *,c} in MW-sized halos. (7) The 2PCFs of galaxies on small scales hold important information regarding the evolution of satellite galaxies, which at high-z is predicted to be much steeper than at low-z, especially for more massive galaxies. We discuss various implications of our findings regarding the formation and evolution of galaxies in a {Lambda}CDM cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE NOTION OF WELL-DEFINED TECTONIC REGIMES FOR TERRESTRIAL PLANETS IN THIS SOLAR SYSTEM AND OTHERS

A model of coupled mantle convection and planetary tectonics is used to demonstrate that history dependence can outweigh the effects of a planet's energy content and material parameters in determining its tectonic state. The mantle convection-surface tectonics system allows multiple tectonic modes to exist for equivalent planetary parameter values. The tectonic mode of the system is then determined by its specific geologic and climatic history. This implies that models of tectonics and mantle convection will not be able to uniquely determine the tectonic mode of a terrestrial planet without the addition of historical data. Historical data exists, to variable degrees, for all four terrestrial planets within our solar system. For the Earth, the planet with the largest amount of observational data, debate does still remain regarding the geologic and climatic history of Earth's deep past but constraints are available. For planets in other solar systems, no such constraints exist at present. The existence of multiple tectonic modes, for equivalent parameter values, points to a reason why different groups have reached different conclusions regarding the tectonic state of extrasolar terrestrial planets larger than Earth ({sup s}uper-Earths{sup )}. The region of multiple stable solutions is predicted to widen in parameter space for more energetic mantle convection (as would be expected for larger planets). This means that different groups can find different solutions, all potentially viable and stable, using identical models and identical system parameter values. At a more practical level, the results argue that the question of whether extrasolar terrestrial planets will have plate tectonics is unanswerable and will remain so until the temporal evolution of extrasolar planets can be constrained.

79 ASTRONOMY AND ASTROPHYSICS↗

SDSS-IV MaNGA: the physical origin of off-galaxy H α blobs in the local Universe

ABSTRACT H α blobs are off-galaxy emission-line regions with weak or no optical counterparts. They are mostly visible in H α line, appearing as concentrated blobs. Such unusual objects have been rarely observed and studied, and their physical origin is still unclear. We have identified 13 H α blobs in the public data of MaNGA survey, by visually inspecting both the optical images and the spatially resolved maps of H α line for ∼4600 galaxy systems. Among the 13 H α blobs, 2 were reported in previously MaNGA-based studies and 11 are newly discovered. This sample, though still small in size, is by far the largest sample with both deep imaging and integral field spectroscopy. Therefore, for the first time we are able to perform statistical studies to investigate the physical origin of H α blobs. We examine the physical properties of these H α blobs and their associated galaxies, including their morphology, environments, gas-phase metallicities, kinematics of ionized gas, and ionizing sources. We find that the H α blobs in our sample can be broadly divided into two groups. One is associated with interacting/merging galaxy systems, of which the ionization is dominated by shocks or diffuse ionized gas. It is likely that these H α blobs used to be part of their nearby galaxies, but were stripped away at some point due to tidal interactions. The other group is found in gas-rich systems, appearing as low-metallicity star-forming regions that are visually detached from the main galaxy. These H α blobs could be associated with faint discs, spiral arms, or dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Reconstruction of the complex angle-dependent photoionization transition dipole from a laser-dressed streaking experiment

We study the retrieval of the angular dependence of the photoionization transition dipole phase of an attosecond XUV pulse in order to reconstruct the whole photoelectron wave packet after the photoemission process. Using a one-electron model Ar atom, we show that the full electron wave packet can be reconstructed from IR-free photoelectron angular distributions and the streaking electron spectra in an IR-dressed XUV photoionization, with photoelectrons along the common polarization direction of the two pulses. The method relies on the validity of the strong-field approximation so it is valid only for higher energy photoelectrons. Here, we also point out that a single photoionization group time delay is not enough to represent a photoemission process; instead, a complete characterization of the electron wave packet requires the retrieval of the spectral phase over the whole bandwidth of the wave packet.

74 ATOMIC AND MOLECULAR PHYSICS↗

Relevance of anisotropy in the Kondo effect: Lessons from the symplectic case

A Kondo model with symplectic symmetry was recently put forward as the effective low-energy theory of a superconducting-island device coupled to multiple leads. This model, which possesses non-Fermi liquid physics and effective anyons, was argued to belong to the class of topological Kondo effects. Here, we clarify the extent of stability of its exotic fixed point using perturbative and numerical renormalization group in conjunction with bosonization and conformal field theory. In contrast to previous claims, we show that asymmetry in the coupling to the leads destabilizes the non-Fermi liquid. Other destabilizing perturbations include asymmetry in the superconducting pairing or internal energy of the individual quantum dots in the island. Nevertheless, these perturbations all generate the same relevant operators. Thus, only a small number of couplings need to be tuned individually, and these can be selected according to experimental convenience. Our results highlight a common misconception that anisotropy in single-channel Kondo couplings is always irrelevant. As demonstrated, relevant terms will emerge whenever the group generators do not span the full space of impurity operators. This calls for a more detailed inspection of models that exhibit this property, such as large-spin impurities and SO⁡( M ) Kondo models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗