Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parametric study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Mach 10 computational study of a three-dimensional scramjet inlet flow field

The present work documents the computational results for a combined computational and experimental parametric study of the internal aerodynamics of a generic three-dimensional sidewall-compression scramjet inlet configuration at Mach 10. The three-dimensional Navier-Stokes code SCRAMIN was chosen for the computational portion of the study because it uses a well-known and well-proven numerical scheme and has shown favorable comparison with experiment at Mach numbers between 2 and 6. One advantage of CFD was that it provided flow field data for a detailed examination of the internal flow characteristics in addition to the surface properties. The experimental test matrix at Mach 10 included three geometric contraction ratios (3, 5, and 9), three Reynolds numbers (0.55 x 10(exp 6) per foot, 1.14 x 10(exp 6) per foot, and 2.15 x 10(exp 6) per foot), and three cowl positions (at the throat and two forward positions). Computational data for two of these configurations (the contraction ratio of 3, Re = 2.15 x 10(exp 6) per foot, at two cowl positions) are presented along with a detailed analysis of the flow interactions in successive computational planes.

Holland, Scott D.↗
NASA NTRS2018

Fundamental Study of a 7-Element Fuel Injector Configuration for Gas Turbine Combustors, a Look at Cold Flow and Burning Measurements

As part of a parametric study in which we vary swirler angle and orientation and look at their effect on fluid mixing and combustion, we examine one configuration of a 7-point lean direct injector by looking at the non-combusting 2-D velocity field using PIV (Particle Image Velocimetry), and combusting system for chemical species using chemiluminescent imaging and flame spectroscopy. The circular 7-point array consists of axial swirlers, with the center 60 degree counterclockwise swirler surrounded by six 52 degree clockwise swirlers. The velocity results for this configuration show that the outer swirlers serve to isolate the center flow field near the injector exit. A recirculation zone forms downstream of the center swirler, but not behind the outer swirlers. The combusting results also show an isolated zone directly downstream of the center injector. The flame spectra show variation in speciation of combustion species such as OH* and CH*, and as a function of position within the combustor.

lean direct injection↗
NASA NTRS1972

The use of models in structural testing.

The design, construction and instrumentation of plastic model shells used in elastic stability studies is discussed. The work demonstrates that specimens made of such materials are of great value in parametric studies because of their ease of manufacture and the simplicity of modification. Additionally, it is shown that they are most useful in the development of nondestructive test techniques. The paper indicates how deformation measurements made at low load levels can be used to accurately predict critical conditions.

Horton, W. H.↗
NASA NTRS1983

Sensitivity /comparison study between the Jacchia 1970, 1971, and 1977 upper atmospheric density models

The neutral upper atmospheric models for the Earth's thermosphere currently used in NASA-MSFC programs are the Jacchia 1970 (J70), 1971 (J71), and 1977 (J77). The Jacchia 1970 model (modified) is used in all MSFC orbital mechanics analyses. Since total density and its variations are the main environmental parameters of interest in orbital lifetime and attitude control studies, the total neutral density was selected for this analysis. This report presents the results of a parametric study of the total density (at 400 km altitude) as computed with three MSFC/Jacchia models. The sensitivity of each of the density models at the summer solstice to varying solar conditions (flux) and geomagnetic (index) values is discussed.

Johnson, D. L.↗
NASA NTRS1982

Inlet design for high-speed propfans

A two-part study was performed to design inlets for high-speed propfan installation. The first part was a parametric study to select promising inlet concepts. A wide range of inlet geometries was examined and evaluated - primarily on the basis of cruise thrust and fuel burn performance. Two inlet concepts were than chosen for more detailed design studies - one apropriate to offset engine/gearbox arrangements and the other to in-line arrangements. In the second part of this study, inlet design points were chosen to optimize the net installed thrust, and detailed design of the two inlet configurations was performed. An analytical methodology was developed to account for propfan slipstream effects, transonic flow efects, and three-dimensional geometry effects. Using this methodology, low drag cowls were designed for the two inlets.

Little, B. H., Jr.↗
NASA NTRS1999

Mixing Enhancement in Supersonic Jets by Delta-Tabs

The investigation includes carry out fundamental experiments studying mechanisms of effect: (1) experiments on subsonic and supersonic jets to assess influence of compressibility, (2) parametric study on tab geometry to optimize effect for given flow blockage (this effort led to "delta-tab"), (3) quantify mixing enhancement in the jet, and (4) analyze mechanism of streamwise vorticity generation.

Zaman, K. B. M. Q.↗
NASA NTRS1997

The Effect of Diffusional Transport and Surface Catalysis on the Aerothermodynamic Heating for Martian Atmospheric Entry

For the reentry heating of 70-degree blunt sphere-cones entering Mars at velocities in excess of 6 km/sec, a study was performed to determine the magnitude of both convective and catalytic heating on the cone forebody. Case studies of the peak heating conditions for the current NASA Mars Pathfinder entry probe, as well as the peak heating conditions of the proposed NASA Mars 2001 aerobraking orbiter mission were performed. Since the actual behavior of the chemical recombination of Mars atmosphere hypersonic shock layer species on heat shield materials is not known, and no experimental studies of any consequence have been done to determine surface reaction rates for the CO2 system, a parametric analysis of various reaction schemes and surface catalytic mechanistic models was performed. In many cases the actual Mars entry probe will have a heat shield composed of an ablative material which can either partially or completely preclude the existence of catalytic surface recombination phenomena. The extent of this blockage effect has not been examined at this time and is not considered in this effort. Instead only non-ablative computations are performed to separately evaluate the full extent of the surface catalysis and related diffusional phenomena. Parametric studies include peak heating point comparisons of non-catalytic, partially catalytic and fully catalytic total surface heat transfer for three difference surface recombination catalytic mechanisms (with and without simultaneous CO + O and O + O recombination) as well as with different species diffusion models. Diffusion model studies include constant Schmidt number (equal diffusivities) and the bifurcation, approximate multi-component diffusion model. Since the gas phase reaction kinetics for the Mars CO2 based atmosphere have also not been validated, the effect of two different (fast and slow) sets of gas kinetics on heat transfer is presented.

Henline, William D.↗
NASA NTRS2004

Preparing and Analyzing Iced Airfoils

SmaggIce version 1.2 is a computer program for preparing and analyzing iced airfoils. It includes interactive tools for (1) measuring ice-shape characteristics, (2) controlled smoothing of ice shapes, (3) curve discretization, (4) generation of artificial ice shapes, and (5) detection and correction of input errors. Measurements of ice shapes are essential for establishing relationships between characteristics of ice and effects of ice on airfoil performance. The shape-smoothing tool helps prepare ice shapes for use with already available grid-generation and computational-fluid-dynamics software for studying the aerodynamic effects of smoothed ice on airfoils. The artificial ice-shape generation tool supports parametric studies since ice-shape parameters can easily be controlled with the artificial ice. In such studies, artificial shapes generated by this program can supplement simulated ice obtained from icing research tunnels and real ice obtained from flight test under icing weather condition. SmaggIce also automatically detects geometry errors such as tangles or duplicate points in the boundary which may be introduced by digitization and provides tools to correct these. By use of interactive tools included in SmaggIce version 1.2, one can easily characterize ice shapes and prepare iced airfoils for grid generation and flow simulations.

Vickerman, Mary B.↗
NASA NTRS1973

Conceptual study of four subsonic VTOL propulsion systems

Typical ejector wing, remote fan-in-wing, remote lift/cruise fan, and lift plus lift/cruise propulsion concepts are parametrically studied on the basis of airplane weights (gross, empty, and propulsion) for three types of airplanes, a Carrier-Onboard Delivery/Search and Rescue airplane for the U.S. Navy, a military utility transport, and a business jet. None of the four systems led to airplanes substantially lighter than the others, and therefore no best system is selected.

Strack, W. C.↗
NASA NTRS1990

Ion beam heating in the auroral zone

Recent satellite observations at high altitudes (above 5000 km) in the auroral zone have shown the existence of hybrid or bimodal ion beam distributions that are evidence of both parallel and perpendicular ion acceleration. To study the nonlinear effects of the ion-ion instability in terms of plasma heating, a numerical simulation parametric study has been performed. It was found that the parallel acceleration that forms the ion beams occurs on a time scale faster than ion-ion wave growth at low drifts; thus ion-ion wave growth is expected to occur primarily for higher drift speeds, which results in strong oblique heating of the ions (both hydrogen and oxygen) forming elevated ion conics.

Schriver, David↗
NASA NTRS1991

Hypersonic nonequilibrium viscous solutions over slender bodies

An extension is undertaken of a previous numerical study in order to improve current understanding of nonequilibrium flow effects over slender bodies. Upon extension of the parametric study to encompass smaller nose radii, the downstream influence of equilibrium nonequilibrium flow is found to be much smaller than for the larger nose radii. A comparison of individual stagnation nonequilibrium heating rates demonstrates that a relative comparison of the ratios was not indicative of the actual heating reduction.

Zoby, E. V.↗
NASA NTRS1983

Transient responses of phosphoric acid fuel cell power plant system

An analytical and computerized study of the steady state and transient response of a phosphoric acid fuel cell (PAFC) system was completed. Parametric studies and sensitivity analyses of the PAFC system's operation were accomplished. Four non-linear dynamic models of the fuel cell stack, reformer, shift converters, and heat exchangers were developed based on nonhomogeneous non-linear partial differential equations, which include the material, component, energy balance, and electrochemical kinetic features. Due to a lack of experimental data for the dynamic response of the components only the steady state results were compared with data from other sources, indicating reasonably good agreement. A steady state simulation of the entire system was developed using, nonlinear ordinary differential equations. The finite difference method and trial-and-error procedures were used to obtain a solution. Using the model, a PAFC system, that was developed under NASA Grant, NCC3-17, was improved through the optimization of the heat exchanger network. Three types of cooling configurations for cell plates were evaluated to obtain the best current density and temperature distributions. The steady state solutions were used as the initial conditions in the dynamic model. The transient response of a simplified PAFC system, which included all of the major components, subjected to a load change was obtained. Due to the length of the computation time for the transient response calculations, analysis on a real-time computer was not possible. A simulation of the real-time calculations was developed on a batch type computer. The transient response characteristics are needed for the optimization of the design and control of the whole PAFC system. All of the models, procedures and simulations were programmed in Fortran and run on IBM 370 computers at Cleveland State University and the NASA Lewis Research Center.

Lu, Cheng-Yi↗
NASA NTRS1990

Ion Beam Heating in the Auroral Zone

Recent satellite observations at high altitudes (greater than 5000 km) in the auroral zone have shown the existence of hybrid or bimodal ion beam distributions that are evidence of both parallel and perpendicular ion acceleration. Acceleration parallel to the magnetic field is most likely due to quasi-static electric fields (double layers) which can create outflowing ion beams; since ions of different mass will have different drift speeds due to this acceleration, a plasma configuration unstable to the ion-ion two-stream acoustic mode develops. When the net drift velocity (U) between the two ion species is greater than the sound speed (C(sub 0)), the ion-ion instability has maximum growth at oblique wave propagation. To study the nonlinear effects of the ion-ion instability in terms of plasma heating, a numerical simulation parametric study has been performed. It was found that the parallel acceleration that forms the ion beams occurs on a time scale faster than ion- ion wave growth at low drifts; thus ion-ion wave growth is expected to occur primarily for higher drift speeds (U greater than C(sub 0)) which results in strong oblique heating of the ions (both hydrogen and oxygen) forming elevated ion conics (sometimes called 'bowl' distributions). Also, strong parallel electron heating in the direction of the ion beams can occur, and electrons near the top of the acceleration region may attain a net upward drift along with the elevated ion conics. Variation of the oxygen density greatly affects the ion heating due to the ion-ion instability; as the oxygen density decreases, oxygen heating increases, in agreement with observations (Collin et al., 1987). Ion-ion electrostatic wave properties and the plasma heating that results over a wide range of auroral zone parameters are included.

Schriver, David↗
DOE OSTI2025

Mitigating Crack Formation When Using High Oxygen Permeability Ionomer in PEMFC Catalyst Layers

High oxygen permeability ionomers (HOPIs) are being developed as an alternative to conventional perfluorosulfonic (PFSA) ionomers for cathodes in proton exchange membrane fuel cells (PEMFCs). HOPIs aim to reduce local oxygen transport resistance, improving performance and reducing degradation as the catalyst loses surface area. However, HOPIs' more rigid, 3D backbone leads to increased crack density in the cathode, potentially causing accelerated degradation. This study investigates crack formation in HOPI-based and PFSA-bound catalyst layers (CLs). We conducted a comprehensive parametric study to identify conditions and catalyst slurry components that minimize cracking. CLs were fabricated with various ionomer and catalyst types, under different relative humidity (RH) levels, solids weight percentages, solvent ratios, and ionomer-to-carbon ratios (I/C). Results show that HOPI-based CLs exhibit less cracking when fabricated under low RH conditions, with lower solids weight percentage, higher alcohol content, and lower I/C. Additionally, catalysts with low/medium surface area carbon supports show less cracking than those with high surface area carbon supports.

08 HYDROGEN↗
NASA NTRS1981

Bodies in flowing plasmas - Laboratory studies

A brief review of early rudimentary laboratory studies of bodies in flowing, rarefied plasmas is presented (e.g., Birkeland, 1908), along with a discussion of more recent parametric studies conducted in steady plasma wind tunnels, which includes the study by Hall et al. (1964), in which a strong ion density enhancement in the center of the ion void created downstream from the body was observed. Good agreement was found between the experimental results and theoretical calculations which omit ion thermal motion. Examples in which in situ data on the interaction between satellites and the ionospheric plasma have been elucidated by the laboratory results are presented, and include evidence for a midwake axial ion peak, and ion current density in the near-wake region. The application of the ionospheric laboratory to basic space plasma physics is discussed, and its application to some types of solar system plasma phenomena is illustrated.

Stone, N. H.↗
NASA NTRS1981

Turboprop cargo aircraft systems study

The effects of using advanced turboprop propulsion systems to reduce the fuel consumption and direct operating costs of cargo aircraft were studied, and the impact of these systems on aircraft noise and noise prints around a terminal area was determined. Parametric variations of aircraft and propeller characteristics were investigated to determine their effects on noiseprint areas, fuel consumption, and direct operating costs. From these results, three aircraft designs were selected and subjected to design refinements and sensitivity analyses. Three competitive turbofan aircraft were also defined from parametric studies to provide a basis for comparing the two types of propulsion.

Muehlbauer, J. C.↗
NASA NTRS2005

An Oil-Free Thrust Foil Bearing Facility Design, Calibration, and Operation

New testing capabilities are needed in order to foster thrust foil air bearing technology development and aid its transition into future Oil-Free gas turbines. This paper describes a new test apparatus capable of testing thrust foil air bearings up to 100 mm in diameter at speeds to 80,000 rpm and temperatures to 650 C (1200 F). Measured parameters include bearing torque, load capacity, and bearing temperatures. This data will be used for design performance evaluations and for validation of foil bearing models. Preliminary test results demonstrate that the rig is capable of testing thrust foil air bearings under a wide range of conditions which are anticipated in future Oil-Free gas turbines. Torque as a function of speed and temperature corroborates results expected from rudimentary performance models. A number of bearings were intentionally failed with no resultant damage whatsoever to the test rig. Several test conditions (specific speeds and loads) revealed undesirable axial shaft vibrations which have been attributed to the magnetic bearing control system and are under study. Based upon these preliminary results, this test rig will be a valuable tool for thrust foil bearing research, parametric studies and technology development.

Bauman, Steve↗
DOE OSTI2021

A Co-design Framework for Online Data Analysis and Reduction

Science applications preparing for the exascale era are increasingly exploring in situ computations comprising of simulation-analysis-reduction pipelines coupled in-memory. Efficient composition and execution of such complex pipelines for a target platform is a codesign process that evaluates the impact and tradeoffs of various application- and system-specific parameters. In this article, we describe a toolset for automating performance studies of composed HPC applications that perform online data reduction and analysis. We describe Cheetah, a new framework for composing parametric studies on coupled applications, and Savanna, a runtime engine for orchestrating and executing campaigns of codesign experiments. Furthermore, this toolset facilitates understanding the impact of various factors such as process placement, synchronicity of algorithms, and storage versus compute requirements for online analysis of large data. Ultimately, we aim to create a catalog of performance results that can help scientists understand tradeoffs when designing next-generation simulations that make use of online processing techniques. We illustrate the design of Cheetah and Savanna, and present application examples that use this framework to conduct codesign studies on small clusters as well as leadership class supercomputers.

97 MATHEMATICS AND COMPUTING↗