Results for “parameter space exploration” — Page 31

DOE OSTI2020

Low-mass Group Environments Have No Substantial Impact on the Circumgalactic Medium Metallicity

We explore how environment affects the metallicity of the circumgalactic medium (CGM) using 13 low-mass galaxy groups (two to five galaxies) at &lang;z{sub abs}&rang;=0.25 identified near background quasars. Using quasar spectra from the Hubble Space Telescope/COS and from Keck/HIRES or the Very Large Telescope/UVES, we measure column densities of or determine limits on CGM absorption lines. We use a Markov Chain Monte Carlo approach with Cloudy to estimate metallicities of cool (T ~ 10{sup 4} K) CGM gas within groups and compare them to CGM metallicities of 47 isolated galaxies. Both group and isolated CGM metallicities span a wide range (-2 < [Si/H] < 0), where the mean group (-0.54 ± 0.22) and isolated (-0.77 ± 0.14) CGM metallicities are similar. Group and isolated environments have similar distributions of H I column densities as a function of impact parameter. However, contrary to isolated galaxies, we do not find an anticorrelation between H I column density and the nearest group galaxy impact parameter. We additionally divided the groups by member luminosity ratios (i.e., galaxy–galaxy and galaxy–dwarf groups). While there was no significant difference in their mean metallicities, a modest increase in sample size should allow one to statistically identify a higher CGM metallicity in galaxy–dwarf groups compared to galaxy–galaxy groups. We conclude that either environmental effects have not played an important role in the metallicity of the CGM at this stage and expect that this may only occur when galaxies are strongly interacting or merging or that some isolated galaxies have higher CGM metallicities due to past interactions. Thus, environment does not seem to be the cause of the CGM metallicity bimodality.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Constraining cosmological parameters using the pairwise kinematic Sunyaev-Zel’dovich effect with CMB-S4 and future galaxy cluster surveys

We present a forecast of the pairwise kinematic Sunyaev-Zel’dovich (kSZ) measurement that will be achievable with the future CMB-S4 experiment. CMB-S4 is the next stage for ground-based cosmic microwave background experiments, with a planned wide-area survey that will observe approximately 50% of the sky. We construct a simulated sample of galaxy clusters that have been optically selected in a Legacy Survey of Space and Time–like survey and have spectroscopic redshifts. For this cluster sample, assuming the likelihood is Gaussian, we predict that CMB-S4 will reject the null hypothesis of zero pairwise kSZ signal at 36⁢𝜎. We estimate the effects of systematic uncertainties such as scatter in the mass-richness scaling relation and cluster miscentering. We find that these effects can reduce the signal-to-noise ratio of the CMB-S4 pairwise kSZ measurement by 20%. We explore the constraining power of the measured kSZ signal in combination with measurements of the galaxy clusters’ thermal SZ emission on two extensions to the standard cosmological model. The first extension allows the dark energy equation of state 𝑤 to vary. We find the CMB-S4 pairwise kSZ measurement yields a modest reduction in the uncertainty on 𝑤 by a factor of 1.36 over the Planck’s 2018 uncertainty. The second extension tests general relativity by varying the growth index 𝛾. In conclusion, we find that CMB-S4’s pairwise kSZ measurement will yield a 28⁢𝜎 constraint on 𝛾 and strongly constrain alternative theories of gravity.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Variational approaches to constructing the many-body nuclear ground state for quantum computing

Here, we explore the preparation of specific nuclear states on gate-based quantum hardware using variational algorithms. Large-scale classical diagonalizations of the nuclear shell model have reached sizes of 10 9 –10 10 basis states but are still severely limited by computational resources. Quantum computing can, in principle, solve such systems exactly with exponentially fewer resources than classical computing. Exact solutions for large systems require many qubits and large gate depth, but variational approaches can effectively limit the required gate depth. We use the unitary coupled cluster approach to construct approximations of the ground-state vectors, later to be used in dynamics calculations. The testing ground is the phenomenological shell model space, which allows us to mimic the complexity of the internucleon interactions. We find that often one needs to minimize over a large number of parameters, using a large number of entanglements that makes the application on existing hardware challenging. Prospects for rapid improvements with more capable hardware are, however, very encouraging.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

BaCu 2 SiS 4 : A New Member of the A II B I 2 M IV Q 4 Chalcogenide Family with a Chiral Crystal Structure

Abstract Noncentrosymmetric ternary and quaternary chalcogenides are studied as promising nonlinear optical (NLO) materials in the mid‐infrared region. Here, we report the synthesis of a new material BaCu 2 SiS 4 in the A II B I 2 M IV Q 4 family ( A =divalent metal; B =monovalent metal; M =tetrel, Q =chalcogen), and discuss its crystal structure, thermal stability, optical behavior, and electronic structure. BaCu 2 SiS 4 crystallizes in the noncentrosymmetric chiral space group P 3 2 21 with lattice parameters a =6.1440(3) Å, c =15.3542(8) Å, V =501.95(6) Å 3 , Z =3. The structure features helical channels formed by corner‐sharing [CuS 4 ] and [SiS 4 ] tetrahedral units. Synthesis was carried out in a molten salt flux, as opposed to a traditional solid‐state route from elements, to minimize the formation of a competing ternary phase, Ba 2 SiS 4 . BaCu 2 SiS 4 is a semiconductor with an experimentally‐determined direct bandgap of ~2.2 eV. The material exhibits second harmonic generation (SHG) activity, confirming the noncentrosymmetric nature of the structure. Analysis of reported A II B I 2 M IV Q 4 crystal structures pointed out a correlation among potential structure types and the radii of the constituent elements. Total energy calculations were carried out to explore the relative stability of several reported crystal structures in this family of compounds.

Sarkar, Arka↗

DOE OSTI2020

Di-Higgs production in the 4b channel and gravitational wave complementarity

We present a complementarity study of gravitational waves and double Higgs production in the 4 b channel, exploring the gauge singlet scalar extension of the SM. This new physics extension serves as a simplified benchmark model that realizes a strongly first-order electroweak phase transition necessary to generate the observed baryon asymmetry in the universe. In calculating the signal-to-noise ratio of the gravitational waves, we incorporate the effect of the recently discovered significant suppression of the gravitational wave signals from sound waves for strong phase transitions, make sure that supercooled phase transitions do complete and adopt a bubble wall velocity that is consistent with a successful electroweak baryogenesis by solving the velocity profiles of the plasma. The high-luminosity LHC sensitivity to the singlet scalar extension of the SM is estimated using a shape-based analysis of the invariant 4 b mass distribution. We find that while the region of parameter space giving detectable gravitational waves is shrunk due to the new gravitational wave simulations, the qualitative complementary role of gravitational waves and collider searches remain unchanged.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Bayesian learning of orthogonal embeddings for multi-fidelity Gaussian Processes

Uncertainty propagation in complex engineering systems often poses significant computational challenges related to modeling and quantifying probability distributions of model outputs, as those emerge as the result of various sources of uncertainty that are inherent in the system under investigation. Gaussian Processes regression (GPs) is a robust meta-modeling technique that allows for fast model prediction and exploration of response surfaces. Multi-fidelity variations of GPs further leverage information from cheap and low fidelity model simulations in order to improve their predictive performance on the high fidelity model. In order to cope with the high volume of data required to train GPs in high dimensional design spaces, a common practice is to introduce latent design variables that are typically projections of the original input space to a lower dimensional subspace, and therefore substitute the problem of learning the initial high dimensional mapping, with that of training a GP on a low dimensional space. Here in this paper, we present a Bayesian approach to identify optimal transformations that map the input points to low dimensional latent variables. The \projection" mapping consists of an orthonormal matrix that is considered a priori unknown and needs to be inferred jointly with the GP parameters, conditioned on the available training data. The proposed Bayesian inference scheme relies on a two-step iterative algorithm that samples from the marginal posteriors of the GP parameters and the projection matrix respectively, both using Markov Chain Monte Carlo (MCMC) sampling. In order to take into account the orthogonality constraints imposed on the orthonormal projection matrix, a Geodesic Monte Carlo sampling algorithm is employed, that is suitable for exploiting probability measures on manifolds. We extend the proposed framework to multi-fidelity models using GPs including the scenarios of training multiple outputs together. We validate our framework on three synthetic problems with a known lower-dimensional subspace. The benefits of our proposed framework, are illustrated on the computationally challenging aerodynamic optimization of a last-stage blade for an industrial gas turbine, where we study the effect of an 85-dimensional shape parameterization of a three-dimensional airfoil on two output quantities of interest, specifically on the aerodynamic efficiency and the degree of reaction

42 ENGINEERING↗

DOE OSTI2025

Simulating Continuum-based Redshift Measurement in the Roman’s High Latitude Spectroscopic Survey

We investigate the capability of the Nancy Grace Roman Space Telescope’s (Roman) Wide-Field Instrument G150 slitless grism to detect red, quiescent galaxies based on the current reference survey. We simulate dispersed images for Roman reference High-Latitude Spectroscopic Survey (HLSS) and analyze two-dimensional spectroscopic data using the grism Redshift and Line Analysis (Grizli) software. This study focus on assessing Roman grism’s capability for continuum-level redshift measurement for a redshift range of 0.5 ≤ z ≤ 2.5. The redshift recovery is assessed by setting three requirements of: σ z = $\frac{|z–z_{true}|}{1+z}$ ≤ 0.01, signal-to-noise ratio≥ 5 and the presence of a single dominant peak in redshift likelihood function. We find that, for quiescent galaxies, the reference HLSS can reach a redshift recovery completeness of ≥50% for F158 magnitude brighter than 20.2 mag. We also explore how different survey parameters, such as exposure time and the number of exposures, influence the accuracy and completeness of redshift recovery, providing insights that could optimize future survey strategies and enhance the scientific yield of the Roman in cosmological research.

Astronomical simulations↗

DOE OSTI2021

Kinetically Controlled Linker Binding in Rare Earth-2,5-Dihydroxyterepthalic Acid Metal–Organic Frameworks and Its Predicted Effects on Acid Gas Adsorption

In the pursuit of highly stable and selective metal–organic frameworks (MOFs) for the adsorption of caustic acid gas species, an entire series of rare earth MOFs have been explored. Each of the MOFs in this series (RE-DOBDC; RE = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu; DOBDC = 2,5-dihydroxyterepthalic acid) was synthesized in the tetragonal space group I4/m. Crystallized MOF samples, specifically Eu-DOBDC, were seen to have a combination of monodentate and bidentate binding when synthesized under typical reaction conditions, resulting in a contortion of the structure. However, extended crystallization times determined that this binding is kinetically controlled and that the monodentate binding option was crystallographically eliminated by extended reaction times at higher temperatures. Furthermore, this series allows for the direct study of the effect of the metal center on the structure of the of the MOF; herein, the lanthanide metal ionic radii contraction across the periodic table results in a reduction of the MOF pore size and lattice parameters. Scanning electron microscopy–energy-dispersive spectroscopy was used to investigate the stages of crystal growth for these RE-DOBDC MOFs. All MOFs, except Er-DOBDC had a minimum of two stages of growth. These analogues were demonstrated by analysis of neutron diffraction (PND) to exhibit a cooperative rotational distortion of the secondary building unit, resulting in two crystallographically distinct linker sublattices. Computational modeling efforts were used to show distinct differences on acid gas (NO 2 and SO 2 ) binding energies for RE-DOBDC MOFs when comparing the monodentate/bidentate combined linker with the bidentate-only linker crystal structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Catalight─An Open-Source Automated Photocatalytic Reactor Package Illustrated through Plasmonic Acetylene Hydrogenation

An open-source and modular Python package, Catalight, is developed and demonstrated to automate (photo)catalysis measurements. (Photo)catalysis experiments require studying several parameters to evaluate performance, including the temperature, gas flow rate and composition, illumination power, and spectral profile. Catalight orchestrates measurements over this complicated parameter space and systematically stores, analyzes, and visualizes the results. To showcase the capabilities of Catalight, we perform an automated apparent activation barrier measurement of acetylene hydrogenation over a plasmonic AuPd catalyst on an Al 2 O 3 support, simultaneously varying laser power, wavelength, and temperature in a multiday experiment controlled by a simple Python script. Our chemical results unexpectedly show an increased activation barrier upon light excitation, contrary to previous findings for other plasmonic reactions and catalysts. We show that the reaction rate order with respect to both acetylene and hydrogen remains unchanged upon illumination, suggesting that molecular surface coverage is not changed by light. By analyzing the inhomogeneity of the laser-induced heating, we attribute these results to a partial photothermal effect combined with a photochemical/hot electron-driven mechanism. In conclusion, our findings highlight the capabilities of a new experiment automation tool; explore the photocatalytic mechanism for an industrially relevant reaction; and identify systematic sources of error in canonical photocatalysis experimental procedures.

Catalysts↗

DOE OSTI2024

Neutrino constraints on inelastic dark matter captured in the Sun

Abstract The flux of neutrinos from annihilation of gravitationally captured dark matter in the Sun has significant constraints from direct-detection experiments. However, these constraints are relaxed for inelastic dark matter as inelastic dark matter interactions generate less energetic nuclear recoils compared to elastic dark matter interactions. In this paper, we explore the possibility for large volume underground neutrino experiments to detect the neutrino flux from captured inelastic dark matter in the Sun. The neutrino spectrum has two components: a mono-energetic “spike” from pion and kaon decays at rest and a broad-spectrum “shoulder” from prompt primary meson decays. We focus on detecting the shoulder neutrinos from annihilation of hadrophilic inelastic dark matter with masses in the range 4–100 GeV and the mass splittings in up to 300 keV. We determine the event selection criterion for DUNE to identify GeV-scale muon neutrinos and anti-neutrinos originating from hadrophilic dark matter annihilation in the Sun, and forecast the sensitivity from contained events. We also map the current bounds from Super-Kamiokande and IceCube on elastic dark matter, as well as the projected limits from Hyper-Kamiokande, to the parameter space of inelastic dark matter. We find that there is a region of parameter space that these neutrino experiments are more sensitive to than the direct-detection experiments. For dark matter annihilation to heavy-quarks, the projected sensitivity of DUNE is weaker than current (future) Super (Hyper) Kamiokande experiments. However, for the light-quark channel, only the spike is observable and DUNE will be the most sensitive experiment.

Astronomy & Astrophysics↗

DOE OSTI2025

Real-Time Wave Energy Converter Control Using Instantaneous Frequency

Wave Energy Converters (WECs) rely on effective Power Take-Off (PTO) control strategies to maximize energy absorption under dynamic sea conditions. Traditional hydrodynamic modeling techniques may require computationally intensive convolution calculations, making real-time control implementation challenging. This paper presents an alternative approach by leveraging instantaneous frequency estimation to dynamically adjust PTO damping in response to varying wave frequencies. Two real-time frequency estimation methods are explored: the Hilbert Transform (HT) and Phase-Locked Loop (PLL). The Hilbert Transform method provides accurate frequency tracking but introduces a delayed response due to its dependence on causal data. Conversely, the PLL approach demonstrates strong potential in frequency tracking but requires careful gain tuning, particularly in complex sea states. Comparative evaluations across multiple test cases—including sinusoidal variations, amplitude steps, frequency step changes, and real-world JONSWAP spectrum waves—highlight the strengths and limitations of each method. The two different PTO control techniques across the various frequency estimation methods were tested under real-sea states using a state-space model of a point-absorbing Wave Energy Converter. The Capture Width Ratio (CWR) is used as a performance metric, with results showing that the HT achieves a 10.6% improvement, while the PLL estimation yields a 0.9% improvement relative to the fixed parameter control baseline. These results highlight the effectiveness of real-time frequency estimation in improving energy absorption compared to static control parameters.

WEC control↗

DOE OSTI2024

BOSS quasar outflows traced by C iv

ABSTRACT We investigate possible factors that drive fast quasar outflows using a sample of 39 249 quasars at median redshift 〈z〉 ≈ 2.17. Unique to this study, the quasar redshifts are re-measured based on the Mg ii emission line, and explore unprecedented outflow velocities (>6000 km s−1), while maintaining statistical significance. We measure reliable C iv blueshifts for 1178 quasars with velocities >2500 km s−1. From those, 255(13) quasars have blueshifts above 4000(6000) km s−1, with the highest C iv velocity ≈7000 km s−1. Several correlations are observed, where higher C iv blueshifts in general are in quasars with broader, weaker C iv emission profiles, weak He ii emission, larger Eddington ratios, and bluer ultraviolet (UV) continuum slope across the rest-frame UV to near-infrared. Analysis reveals two primary factors contributing to faster outflows: higher Eddington ratios, and softer far-UV continuum (hν >24.6 eV). We find supporting evidence that radiative line driving may generate extreme outflow velocities, influenced by multiple factors as suggested by the aforementioned correlations. This evidence highlights the importance of considering a multidimensional parameter space in future studies when analyzing large C iv blueshifts to determine the fundamental causes of outflows.

Gillette, Jarred (ORCID:0000000185284839)↗

DOE OSTI2023

Towards a Circular Economy for PET Bottles in the US

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

circular economy↗

DOE OSTI2024

Towards a Circular Economy for PET Bottles in the U.S. - 4P Model

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

carbon↗

DOE OSTI2024

Towards a Circular Economy for PET Bottles in the U.S. - 4P Framework

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

circular economy↗

DOE OSTI2024

Exploring laser-material interactions of zirconium carbide under additive manufacturing conditions

Zirconium carbide (ZrC) is an ultra-high temperature ceramic with a melting temperature above 3000°C and a broad range of high temperature applications. Given the high melting and sintering temperatures of pure ZrC, producing near-net shape and fully dense parts remains challenging with conventional techniques. In this study, we investigate the fundamental laser-material interactions of ZrC under laser powder bed fusion (LPBF) additive manufacturing (AM) conditions. Normalized enthalpy, a scaling law term that is used in welding and AM literature for detailing laser-material interactions in metallic alloys, was calculated to determine the predictive capabilities of melt pool features in ZrC. Further, the melt pool quality of laser irradiated ZrC was used to compare LPBF relevant laser parameter combinations of laser power, scan speed, and beam diameter. Laser build parameters that resulted in desirable melt pool morphologies were applied to the fabrication of ZrC coupons using LPBF AM. A custom LPBF system was used to determine hatch spacing and layer height parameters that resulted in a fabricated sample with a density of 85% as measured by Archimedes and a Vicker's microhardness of 20.9 ± 1.9 GPa. This investigation reveals the laser-material interactions of ZrC under AM relevant conditions and is the first step towards LPBF fabrication of ZrC parts.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Machine-Learning Analysis of Radiative Decays to Dark Matter at the LHC

The search for weakly interacting matter particles (WIMPs) is one of the main objectives of the High Luminosity Large Hadron Collider (HL-LHC). In this work we use Machine-Learning (ML) techniques to explore WIMP radiative decays into a Dark Matter (DM) candidate in a supersymmetric framework. The minimal supersymmetric WIMP sector includes the lightest neutralino that can provide the observed DM relic density through its co-annihilation with the second lightest neutralino and lightest chargino. Moreover, the direct DM detection cross section rates fulfill current experimental bounds and provide discovery targets for the same region of model parameters in which the radiative decay of the second lightest neutralino into a photon and the lightest neutralino is enhanced. This strongly motivates the search for radiatively decaying neutralinos which, however, suffers from strong backgrounds. We investigate the LHC reach in the search for these radiatively decaying particles by means of cut-based and ML methods and estimate its discovery potential in this well-motivated, new physics scenario. We demonstrate that using ML techniques would enable access to most of the parameter space unexplored by other searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Uncertainty quantification for Bayesian active learning in rupture life prediction of ferritic steels

Abstract Three probabilistic methodologies are developed for predicting the long-term creep rupture life of 9–12 wt%Cr ferritic-martensitic steels using their chemical and processing parameters. The framework developed in this research strives to simultaneously make efficient inference along with associated risk, i.e., the uncertainty of estimation. The study highlights the limitations of applying probabilistic machine learning to model creep life and provides suggestions as to how this might be alleviated to make an efficient and accurate model with the evaluation of epistemic uncertainty of each prediction. Based on extensive experimentation, Gaussian Process Regression yielded more accurate inference ( $$Pearson\;correlation\;coefficent> 0.95$$ P e a r s o n c o r r e l a t i o n c o e f f i c e n t > 0.95 for the holdout test set) in addition to meaningful uncertainty estimate (i.e., coverage ranges from 94 to 98% for the test set) as compared to quantile regression and natural gradient boosting algorithm. Furthermore, the possibility of an active learning framework to iteratively explore the material space intelligently was demonstrated by simulating the experimental data collection process. This framework can be subsequently deployed to improve model performance or to explore new alloy domains with minimal experimental effort.

20 FOSSIL-FUELED POWER PLANTS↗