Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

An anomalous structure disordering in Zr–Cu–Ag supercooled glass-forming liquids

An anomalous ordering-to-disordering transition in a Zr–Cu–Ag supercooled glass-forming liquid has been revealed by in situ high-energy x-ray diffraction. Upon heating, the supercooled liquid exhibits a structural crossover at T c = 716 K, evident by the change in statistical characteristics of the first sharp diffraction peak. When annealed in the vicinity of T c , the supercooled liquid first relaxes from its initial state to a denser and more ordered state. Subsequently, it becomes disordered at the medium-range scale with a slowing down of densification, as demonstrated by the broadening of the first sharp diffraction peak and a decrease in the peak intensities of the higher atomic shells in the reduced pair distribution function. Finally, a scenario for the evolution of less correlated locally favored clusters in the liquid–liquid phase transition is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural study of Ti-rich Mg-Ti hydrides

Mg x Ti 1-x (x = 0.15, 0.25, 0.35) alloys were synthesized by means of ball milling. Under a hydrogen pressure of 8 MPa at 423 K these Mg–Ti alloys formed a hydride phase with a face centered cubic (FCC) structure. The hydride for x = 0.25 consisted of single Mg 0.25 Ti 0.75 H 1.62 FCC phase but TiH 2 and MgH 2 phases were also formed in the hydrides for x = 0.15 and 0.35, respectively. X-ray diffraction patterns and the atomic pair distribution function indicated that numbers of stacking faults were introduced. There was no sign of segregation between Mg and Ti in Mg 0.25 Ti 0.75 H 1.62 . Electronic structure of Mg 0.25 Ti 0.75 H 1.62 was different from those of MgH 2 and TiH 2 , which was demonstrated by 1 H nuclear magnetic resonance. This strongly suggested that stable Mg–Ti hydride phase was formed in the metal composition of Mg 0.25 Ti 0.75 without disproportion into MgH 2 and TiH 2 .

Asano, Kohta↗

Local atomic configurations in mechanically alloyed amorphous (FeCoNi) 70 Ti 10 B 20 powders

Here, the atomic structure of amorphous (FeCoNi) 70 Ti 10 B 20 alloy synthesized by mechanical alloying was investigated using high energy synchrotron X-ray diffraction and inverse Monte Carlo simulations of pair distribution functions. Empirical potential structure refinement indicates a chemical short-range order at the length scales of 2.1–2.5 Å via local atomic arrangements forming deformed bcc-like clusters. The structural model obtained was described by bond lengths, coordination numbers, and bond angle distribution functions determined for the first neighbor atoms by x-ray scattering supplemented with 3D Monte Carlo simulations.

36 MATERIALS SCIENCE↗

Complex magnetic ground state driving a large rotating magnetocaloric effect in Tb 3 Ni at low temperature

The rotating magnetocaloric effect (RMCE) offers a promising alternative to conventional magnetocaloric configurations by taking advantage of magnetic anisotropy to simplify device architecture and enhance refrigeration efficiency. In this study, the RMCE in a high-quality single crystal of Tb 3 Ni is investigated, a compound previously shown to exhibit significant magnetocaloric behavior along its easy axis of magnetization. By measuring the magnetization and corresponding entropy change along the three principal crystallographic axes using a discontinuous measurement protocol, we verify the anisotropic magnetic properties and derive the RMCE from rotations between hard ( a, b ) and easy ( c ) axes of magnetization. Our results show a maximum value for the rotating entropy change of 19.5 J kg −1 K −1 for µ 0 H = 7 T around 60 K, within the critical temperature window for industrial gas liquefaction applications. Neutron diffraction and magnetic Pair-Distribution Function (mPDF) analysis reveal that the origin of this large anisotropic response lies in a partially ordered incommensurate spin-density wave phase and persistent short-range ferromagnetic (FM) correlations. These complex magnetic states enable the release of a substantial amount of magnetic entropy when the field is applied along the easy c-axis, effectively driving the large RMCE. Comparison with other RMCE materials confirms Tb 3 Ni as one of the most promising candidates in this temperature regime, offering both a large magnetic entropy change and a wide operating window.

Gas liquefaction↗

Theory meets experiment: Insights into structure and magnetic properties of Fe 1-x Ni x B alloy

Here, we studied the structural and magnetic properties of the solid solution Fe 1-x Ni x B through theoretical and experimental approaches. Powder X-ray diffraction, X-ray Pair Distribution Function analysis, and energy dispersive X-ray spectroscopy reveal that the Fe 1-x Ni x B solid solution crystallizes in the β-FeB structure type up to x = 0.6–0.7 and exhibits anisotropic unit cell volume contraction with increasing Ni concentration. Magnetic measurements showed a transition from ferromagnetism to paramagnetism around x = 0.7. For x = 0.5, the low (< 0.3 μ B ) magnetic moments suggest itinerant magnetism despite the relatively high Curie temperature (up to 225 K). Theoretical calculations indicated different types of magnetic orderings depending on the Fe/Ni atomic order, with the antiferromagnetic state being stable for ordered FeNiB 2 , whereas the ground state is ferromagnetic for the disordered alloy. Calculations also predicted the coexistence of low- and high-spin states in Fe atoms around the composition with x = 0.5, in line with the experimental evidence from 57 Fe Mössbauer spectroscopy. The two magnetically distinct Fe sites for x = 0.3, 0.4, and 0.5 observed by 57 Fe Mössbauer spectroscopy can also be interpreted as two magnetically different regions or clusters. The formation of these clusters could affect the critical behavior near a quantum magnetic transition based on a potential ferromagnetic quantum critical point identified computationally and experimentally near x = 0.64. This work highlights the complex interplay between structure and magnetism in Fe 1-x Ni x B alloys, suggesting areas for future research on quantum critical behavior.

Bhaskar, Gourab [Iowa State Univ., Ames, IA (Unite↗

High pressure x-ray diffraction measurements on Mg{sub 2}SiO{sub 4} glass.

The structure factors of Mg{sub 2}SiO{sub 4} glass have been measured using high energy x-ray diffraction up to pressures of 30.2 GPa, and the equation of state measured up to 12.8 GPa. The average Mg-O coordination numbers were extracted from the experimental pair distribution functions assuming two cases (i) there is no change in Si-O coordination number with pressure and (ii) the average Si-O coordination number increases the same as for pure SiO{sub 2} glass. Both analysis give similar results and show a gradual increase in the average Mg-O coordination number from 5.0 at ambient pressure to {approx}6.6(6) at 30.2 GPa. There is good qualitative agreement between the experimental structure and equation of state data for the glass compared to several recent molecular dynamics simulations carried out on liquid Mg{sub 2}SiO{sub 4}.

36 MATERIALS SCIENCE↗

Structures of Vanadium-Containing Silicate and Borosilicate Glasses: Vanadium Potential Development and MD Simulations

Vanadium-containing multi-component glasses have been found with widely interests in various applications. However, the complex compositions, thus structures, lead to the challenges in experiments to understand the structural origin of the property change of these glasses. In this work, we developed compatible vanadium-related parameters for a widely used pair wise potential set to enable the simulations of the vanadium-containing multi-component glasses. Various crystal structures and glass compositions (with vanadium in different oxidation states) have been tested using the newly developed parameters, and structural information of cell parameters, pair distribution function, estimated bond distance, and coordination number have been obtained. The results are in good agreement with available experimental data, which indicates the new vanadium parameters can be used to simulate the vanadium-containing multi-component glasses and thus help study those applications with wide interests.

Deng, Lu↗

Neutron powder diffraction and first-principles computational studies of CuLi{sub x}Mg{sub 2-x} (x{approx_equal}0.08), CuMg{sub 2}, and Cu{sub 2}Mg

A small addition of Li changes the orthorhombic structure of CuMg{sub 2} to hexagonal CuLi{sub x}Mg{sub 2-x} (x=0.08). Determining the Li content of the ternary phase and Li atomic positions was our main objective for this work. For this reason we performed neutron diffraction at several different temperatures below and above room temperature. The results obtained on two neutron powder diffractometers were compared with X-ray diffraction (XRD) data, and with first-principles calculations. The first-principles calculations are in good agreement with Rietveld-refined data from neutron diffraction, but do not show a marked preference for one of several possible Li sites. The pair distribution function (PDF) fitting is consistent with Li substituting only Mg1 (1/2, 0, z). Interstitial spaces in the structure of CuMg{sub 2} and of CuLi{sub x}Mg{sub 2-x} were also considered, but are unlikely to be occupied by Li. Neutron diffraction data for binary CuMg{sub 2} and Cu{sub 2}Mg were also obtained. - Graphical abstract: CuLi{sub x}Mg{sub 2-x} with x=0.08 crystallizes in a P6{sub 2}22 hexagonal structure in which Li (red) will substitute Mg1 (1/2, 0, z) sites (Mg-grey). Cu atoms are represented by black spheres and empty spaces by transparent ones.

36 MATERIALS SCIENCE↗

Structural originations of irreversible capacity loss from highly lithiated copper oxides

We use electrochemistry, high-energy X-ray diffraction (XRD) with pair-distribution function analysis (PDF), and density functional theory (DFT) to study the instabilities of Li{sub 2}CuO{sub 2} at varying state of charge. Rietveld refinement of XRD patterns revealed phase evolution from pure Li{sub 2}CuO{sub 2} body-centered orthorhombic (Immm) space group to multiphase compositions after cycling. The PDF showed CuO{sub 4} square chains with varying packing during electrochemical cycling. Peaks in the G(r) at the Cu-O distance for delithiated, LiCuO{sub 2}, showed CuO{sub 4} square chains with reduced ionic radius for Cu in the 3+ state. At full depth of discharge to 1.5 V, CuO was observed in fractions greater than the initial impurity level which strongly affects the reversibility of the lithiation reactions contributing to capacity loss. DFT calculations showed electron removal from Cu and O during delithiation of Li{sub 2}CuO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the defect structure of solution grown zinc oxide

Zinc oxide (ZnO) is a wide bandgap semiconducting oxide with many potential applications in various optoelectronic devices such as light emitting diodes (LEDs) and field effect transistors (FETs). Much effort has been made to understand the ZnO structure and its defects. However, one major issue in determining whether it is Zn or O deficiency that provides ZnO its unique properties remains. X-ray absorption spectroscopy (XAS) is an ideal, atom specific characterization technique that is able to probe defect structure in many materials, including ZnO. In this paper, comparative studies of bulk and aqueous solution grown ({<=}90 Degree-Sign C) ZnO powders using XAS and x-ray pair distribution function (XPDF) techniques are described. The XAS Zn-Zn correlation and XPDF results undoubtedly point out that the solution grown ZnO contains Zn deficiency, rather than the O deficiency that were commonly reported. This understanding of ZnO short range order and structure will be invaluable for further development of solid state lighting and other optoelectronic device applications. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer ZnO powders have been synthesized through an aqueous solution method. Black-Right-Pointing-Pointer Defect structure studied using XAS and XPDF. Black-Right-Pointing-Pointer Zn-Zn correlations are less in the ZnO powders synthesized in solution than bulk. Black-Right-Pointing-Pointer Zn vacancies are present in the powders synthesized. Black-Right-Pointing-Pointer EXAFS and XPDF, when used complementary, are useful characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural analysis of highly porous γ-Al{sub 2}O{sub 3}

Two highly porous γ-aluminas, a commercial catalyst obtained from the calcination of boehmite and a highly mesoporous product obtained from amorphous aluminum (oxy)hydroxide via a sol–gel-based process were investigated by {sup 27}Al nuclear magnetic resonance (NMR), transmission electron microscopy (TEM), and atomic pair distribution function (PDF) analysis of synchrotron powder diffraction data. NMR data showed for both materials a distribution of tetrahedrally and octahedrally coordinated Al at a 0.30:0.70 ratio, which is typical for γ-aluminas. TEM studies revealed that rod-shaped particles with about 5 nm in thickness are the building blocks of the porous structure in both materials. These particles often extend to a length of 50 nm in the commercial catalyst and are considerably shorter in the sol–gel-based material, which has a higher surface area. Refinement of PDFs revealed the presence of a ∼1 nm scale local structure and the validity of a tetragonal average structure for both materials. This tetragonal average structure contains a substantial fraction of non-spinel octahedral Al atoms. It is argued that the presence of local structure is a general feature of γ-alumina, independent of precursor and synthesis conditions. The concentration of “non-spinel” Al atoms seems to correlate with surface properties, and increases with increasing pore size/surface area. This should have implications to the catalytic properties of porous γ-alumina. - Graphical abstract: Boehmite-derived and sol–gel synthesized porous γ-Al{sub 2}O{sub 3} possess identical structural properties, featuring a nm scale local structure and a tetragonal average structure. - Highlights: • Porous γ-Al{sub 2}O{sub 3} generally possesses a nm-scale local structure. • The tetragonal average structure contains a substantial fraction of “non-spinel” Al atoms. • The concentration of “non-spinel” Al atoms correlates with surface properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short- and medium-range order in Sb–Se glasses

Neutron diffraction measurements were performed to investigate the structure of Sb{sub x}Se{sub 100−x} bulk glasses with x=5, 10, 15, 20 and 25 at% Sb. The total pair distribution functions show two peaks at 2.36 Å and 2.64 Å, which are attributed to Se–Se and Sb–Se bonds, respectively. The coordination numbers calculated from these peaks indicate that Sb atoms are three-coordinated and Se atoms are two-coordinated for all the above compositions. However, the composition dependences of the first two peaks in the structure factors show an obvious change between 15 and 20 at% Sb, indicating that the medium-range structure is changed in this range of Sb content. In order to elucidate the medium-range structure, reverse Monte Carlo simulation was used with coordination number constraints. The structure models consisting of a mixture of the SbSe{sub 3/2} network and Se{sub n} chain clusters were in good agreement with neutron diffraction data for Se-rich glass (5, 10 and 15 at% Sb). On the other hand, a better fit was obtained for Sb{sub 25}Se{sub 75} glass with a model based on the network structure formed by connected SbSe{sub 3} units. - Graphical abstract: A 50 Å slice of the RMC configuration for Sb{sub 15}Se{sub 85} glass. - Highlights: • Sb atoms are three-coordinated and Se atoms are two-coordinated. • The medium-range structure changes between 15 and 20 at%. • The phase-separation tendency is observed in Se-rich glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A melting-like process and the local structures during the anatase-to-rutile transition

Highlights: • The maximum size of anatase crystallites is more useful to describe the phase stability than the traditional critical size. • The melting-like process accelerates the phase transition from anatase to rutile. • The cis-coordinated anatase is transformed to trans-coordinated rutile by torsion & rotation of TiO{sub 6} octahedra in anatase. Phase transition of titanium oxide from anatase to rutile was investigated by using transmitted electron microscope (TEM), scanning electron microscope (SEM) and X-ray diffraction (XRD), in combination with the atomic pair distribution function (PDF) technique. The transition range is about 528–805 °C and the critical size is ~73 nm for the sol-gel samples calcined for 6 h. A melting-like process was evidently observed in the transition samples by SEM and it will speed up the phase transition. PDF reveals that anatase crystallites are packed by neighbouring TiO{sub 6} octahedra in a cis-coordinated way. Anatase crystallites larger than the critical size will be unstable and transform into rutile in a trans-coordinated way by torsion and rotation of part of octahedra and it will rapidly spread the entire crystallites driven by a melting-like process. We suggest the maximum size of anatase will be more technically useful for the description of the phase stability from anatase to rutile because unstable small anatase crystals are consumed during longer calcination process to grow the larger anatase crystals.

36 MATERIALS SCIENCE↗

Deformation behavior of annealed Cu64Zr36 metallic glass via molecular dynamics simulations

In the present work, we investigate the isothermal annealing process of Cu 64 Zr 36 metallic glass (MG) by means of molecular dynamics (MD) simulations, and characterize the compression properties under different temperatures and compressive rates. The pair distribution functions, the bond-orientational order, and the cluster-type index method are modeled and analyzed to characterize changes in the structure. Results of the modeling and analysis reveal that the MgZn 2 -type Laves, MgCu 2 -type Laves and five-fold local symmetry structures can be formed during the isothermal holding at 950 K. Study on the compression properties shows that at a fixed strain rate, the yield strength and yield drop all increase with decreasing temperature. At a fixed temperature, however, the increase of the strain rate leads to a noticeable increase in the yield strength at 600 K, but has little effect on yield strength at 10 K. Moreover, the modeling and analysis of the structure at a temperature of 10 K and strain-rate of 5 × 10 7 s -1 demonstrate that the order-disorder transformation initiates the shear band.

36 MATERIALS SCIENCE↗

The local structure of 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 from neutron total scattering measurements and multi-edge X-ray absorption analysis

Neutron total scattering measurements and multi-edge X-ray absorption analysis were performed on a 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 powder sample. The TiIII-II edges showed that titanium is distorted in the rhombohedral [111] direction (in a BaTiO 3 -like chemical and bonding environment). Extended X-ray fine structure analysis (EXAFS) was performed on the zirconium K-edge and it was found that zirconium resides in the center of the ZrO 6 octahedra in cubic symmetry. Furthermore, the local structure was initially modelled with the orthorhombic Amm2 space group with unsatisfactory results. To better model the local structure, the results from the EXAFS analysis were incorporated into the small-box pair distribution function (PDF) refinements and the best fit of the observed data was a combination of barium calcium titanate (BCT) and barium calcium zirconate (BCZ) phases.

36 MATERIALS SCIENCE↗

Machine learning bridges local static structure with multiple properties in metallic glasses

A long-standing challenge in the metallic glass (MG) community has been how to quantitatively gauge the influence of the intricate local packing environment on the response (such as the propensity for atomic rearrangement) of the atomic configuration to external stimuli. Here we establish this structure–property relation by representing the complex amorphous structure using a single, flexibility-orientated structural quantity. This structural flexibility (SF) couples to a bona fide structural representation, the pair distribution function (PDF) of individual atoms, through a weighting function that reflects what matters in the static atomic configuration to dynamic responses. Machine learning is used, employing microscopic flexibility volume as the supervisory signal, to establish via direct regression an optimized weighting vector, which is proven robust for all quenching rates, deformation conditions, and different compositions in a given (e.g., Cu x Zr 100-x ) alloy system. Additionally, the SF is evaluated solely from the particle positions (PDF), for any structure variation, from the atomic scale up to sample average. Strong correlations are demonstrated between SF and a broad range of properties, including vibrational, diffusional, as well as elastic and plastic relaxation responses.

36 MATERIALS SCIENCE↗