Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mount”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A corner-reflector mixer mount for far infrared wavelengths

A new type of corner-reflector mixer mount, which has the advantages of ease of fabrication and assembly as well as frequency versatility, has been designed and constructed. The predicted response patterns have been experimentally verified for various antenna lengths and operating frequencies between 800 and 2000 GHz. An important design feature is the incorporation of a microstrip matching network which eliminates IF impedance mismatch and provides mechanical isolation for the whisker antenna.

Zmuidzinas, J.↗
NASA NTRS1988

A review of test results on solar thermal power modules with dish-mounted Stirling and Brayton cycle engines

This paper presents results of development tests of various solar thermal parabolic dish modules and assemblies that used dish-mounted Brayton or Stirling cycle engines for production of electric power. These tests indicate that early modules achieve net efficiencies up to 29 percent in converting sunlight to electricity, as delivered to the grid. Various equipment deficiencies were observed and a number of malfunctions occurred. The performance measurements, as well as the malfunctions and other test experience, provided information that should be of value in developing systems with improved performance and reduced maintenance.

Jaffe, Leonard D.↗
NASA NTRS1990

Transducer-Mounting Fixture

Transducer-mounting fixture holds transducer securely against stud. Projects only slightly beyond stud after installation. Flanged transducer fits into fixture when hinged halves open. When halves reclosed, fixture tightened onto threaded stud until stud makes contact with transducer. Knurled area on fixture aids in tightening fixture on stud.

Spiegel, Kirk W.↗
NASA NTRS1990

Attachment of lead wires to thin film thermocouples mounted on high temperature materials using the parallel gap welding process

Parallel gap resistance welding was used to attach lead wires to sputtered thin film sensors. Ranges of optimum welding parameters to produce an acceptable weld were determined. The thin film sensors were Pt13Rh/Pt thermocouples; they were mounted on substrates of MCrAlY-coated superalloys, aluminum oxide, silicon carbide and silicon nitride. The entire sensor system is designed to be used on aircraft engine parts. These sensor systems, including the thin-film-to-lead-wire connectors, were tested to 1000 C.

Holanda, Raymond↗
NASA NTRS1990

A helmet mounted display to adapt the telerobotic environment to human vision

A Helmet Mounted Display system has been developed. It provides the capability to display stereo images with the viewpoint tied to subjects' head orientation. The type of display might be useful in a telerobotic environment provided the correct operating parameters are known. The effects of update frequency were tested using a 3D tracking task. The effects of blur were tested using both tracking and pick-and-place tasks. For both, researchers found that operator performance can be degraded if the correct parameters are not used. Researchers are also using the display to explore the use of head movements as part of gaze as subjects search their visual field for target objects.

Tharp, Gregory↗
NASA NTRS1989

Head-mounted spatial instruments II: Synthetic reality or impossible dream

A spatial instrument is defined as a spatial display which has been either geometrically or symbolically enhanced to enable a user to accomplish a particular task. Research conducted over the past several years on 3-D spatial instruments has shown that perspective displays, even when viewed from the correct viewpoint, are subject to systematic viewer biases. These biases interfere with correct spatial judgements of the presented pictorial information. The design of spatial instruments may not only require the introduction of compensatory distortions to remove the naturally occurring biases but also may significantly benefit from the introduction of artificial distortions which enhance performance. However, these image manipulations can cause a loss of visual-vestibular coordination and induce motion sickness. Consequently, the design of head-mounted spatial instruments will require an understanding of the tolerable limits of visual-vestibular discord.

Ellis, Stephen R.↗
NASA NTRS1989

Hydrogen-isotope evidence for extrusion mechanisms of the Mount St Helens lava dome

Hydrogen isotope analyses were used to determine water content and deuterium content for 18 samples of the Mount St Helens dome dacite in an attempt to identify the triggering mechanisms for periodic dome-building eruptions of lava. These isotope data, the first ever collected from an active lava dome, suggest a steady-state process of magma evolution combining crystallization-induced volatile production in the chamber with three different degassing mechanisms: closed-system volatile loss in the magma chamber, open-system volatile release during ascent, and kinetically controlled degassing upon eruption at the surface. The data suggest the future dome-building eruptions may require a new influx of volatile-rich magma into the chamber.

Anderson, Steven W.↗
NASA NTRS1990

Design of a three-component wall-mounted balance

The design and evaluation of a three-component, wall-mounted pyramidal balance for a small wind tunnel is discussed. The balance was designed to measure lift, drag, pitching moment, and angle of attack. The specific design of each component and mathematical models used to design the balance are covered. Balance evaluation consisted of calibration, tare, and interaction analysis.

Winkelmann, Allen E.↗
NASA NTRS1989

Helmet-mounted display systems for flight simulation

Simulation scientists are continually improving simulation technology with the goal of more closely replicating the physical environment of the real world. The presentation or display of visual information is one area in which recent technical improvements have been made that are fundamental to conducting simulated operations close to the terrain. Detailed and appropriate visual information is especially critical for nap-of-the-earth helicopter flight simulation where the pilot maintains an 'eyes-out' orientation to avoid obstructions and terrain. This paper describes visually coupled wide field of view helmet-mounted display (WFOVHMD) system technology as a viable visual presentation system for helicopter simulation. Tradeoffs associated with this mode of presentation as well as research and training applications are discussed.

Haworth, Loren A.↗
NASA NTRS1991

Self-Aligning Sensor-Mounting Fixture

Optical welding sensors replaced without realignment. Mounting fixture for optical weld-penetration sensor enables accurate and repeatable alignment. Simple and easy to use. Assembled on welding torch, it holds sensor securely and keeps it pointed toward weld pool. Designed for use on gas/tungsten arc-welding torch, fixture replaces multipiece bracket.

Gilbert, Jeffrey L.↗
NASA NTRS1990

EMU helmet mounted display

A helmet mounted display device is disclosed for projecting a display on a flat combiner surface located above the line of sight where the display is produced by two independent optical channels with independent LCD image generators. The display has a fully overlapped field of view on the combiner surface and the focus can be adjusted from a near field of four feet to infinity.

Marmolejo, Jose↗
NASA NTRS1991

Convective response of a wall-mounted hot-film sensor in a shock tube

Shock tube experiments were performed in order to determine the response of a single hot-film element of a sensor array to transiently induced flow behind weak normal shock waves. The experiments attempt to isolate the response due only to the change in convective heat transfer at the hot-film surface mounted on the wall of the shock tube. The experiments are described, the results being correlated with transient boundary layer theory and compared with an independent set of experimental results. One of the findings indicates that the change in the air properties (temperature and pressure) precedes the air mass transport, causing an ambiguity in the sensor response to the development of the velocity boundary layer. Also, a transient, local heat transfer coefficient is formulated to be used as a forcing function in an hot-film instrument model and simulation which remains under investigation.

Roberts, A. Sidney, Jr.↗
NASA NTRS1991

Advanced magnetic suspensions for vibration isolation and fast-attitude control of space-based generic pointing mounts

Advanced magnetic suspension for vibration isolation and fast-attitude control of space-based generic pointing mounts (GPM) is presented in the form of viewgraphs. The following subject areas are covered: design criteria for GPM; GPM system features; GPM performance characteristics; GPM functional block diagram; and other applications for generic magnetic suspension technologies.

Bosley, Robert W.↗
NASA NTRS1989

Measurement of surface microtopography using helicopter-mounted stereo film cameras and two stereo matching techniques

A common problem in acquiring ground-truth data for use in microwave interaction modeling is the capture of surface roughness data that are both sampled at distances comparable to a fraction of the wavelength and extensive enough to represent the surface statistics in at least one resolution cell of the microwave remote sensor used. A technique has been developed for acquiring the necessary photogrammetric data using twin 70-mm film cameras mounted on a helicopter boom. The apparatus is described, and the accuracy with which ground surface roughness can be characterized using this device is estimated. Both standard and cross-correlation methods were used for data reduction. Stereogrammetry is compared with a completely automated image-matching technique. Dense disparity images were generated from the helicopter stereo pairs. Using interior orientation parameters supplied by the camera manufacturers, and assuming that exterior orientation parameters remain constant between control target and test field photography, an extremely dense DEM (digital elevation model) for a test field has been derived. Results are compared, and accuracy estimates are presented.

Wall, S. D.↗
NASA NTRS1990

Intrusive and extrusive growth of the Mount St Helens lava dome

High-resolution, digital topographic maps of the Mount St. Helens dome derived from aerial photographs are used here to make a quantitative assessment of the partitioning of magma into endogenous intrusion and exogenous lobes. The endogenous growth is found to be predictable, which shows that the cooling dome controls its own development independently of such deep-seated factors as magma overpressure and extrusion rate. The observed regular decrease in exogenous growth rate also allows volume prediction. Knowledge of the volume can be used to determine when an ongoing eruptive event should end. Finally, the observed transition from predominantly exogenous to predominantly endogenous growth reflects the increase in crust thickness, which in turn seems to depend on long repose periods rather than some fundamental change in the character of the dome.

Fink, Jonathan H.↗
NASA NTRS1991

A multiblock/multigrid Euler analysis of a propfan transport with wing-mounted nacelles, including slipstream effects

A multiblock/multigrid computation of the inviscid flow over a wing-mounted propfan transport with propwash is presented. An explicit multistage scheme drives the integral Euler equations to a steady state solution, while an actuator disk approximates the slipstream effects of the propfan blades. Practical applications of detailed surface gridding, multiple block field grids and multigrid convergence acceleration are demonstrated.

Nishida, Brian A.↗
NASA NTRS1989

Design of the GOES Telescope secondary mirror mounting

The GOES Telescope utilizes a flexure mounting system for the secondary mirror to minimize thermally induced distortions of the secondary mirror. The detailed design is presented along with a discussion of the microradian pointing requirements and how they were achieved. The methodology used to dynamically tune the flexure/secondary mirror assembly to minimize structural interactions will also be discussed.

Hookman, Robert A.↗
NASA NTRS1991

Ca II H and K measurements made at Mount Wilson Observatory, 1966-1983

Summaries are presented of the photoelectric measurements of stellar Ca II H and K line intensity made at Mount Wilson Observatory during the years 1966-1983. These results are derived from 65,263 individual observations of 1296 stars. For each star, for each observing season, the maximum, minimum, mean, and variation of the instrumental H and K index 'S' are given, as well as a measurement of the accuracy of observation. A total of 3110 seasonal summaries are reported. Factors which affect the ability to detect stellar activity variations and accurately measure their amplitudes, such as the accuracy of the H and K measurements and scattered light contamination, are discussed. Relations are given which facilitate intercomparison of 'S' values with residual intensities derived from ordinary spectrophotometry, and for converting measurements to absolute fluxes.

Duncan, Douglas K.↗