Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Ultrasmall Zeolite L Crystals Prepared from Highly Interdispersed Alkali‐Silicate Precursors

Abstract The preparation of nanosized zeolites is critical for applications where mass‐transport limitations within microporous networks hinder their performance. Often the ability to generate ultrasmall zeolite crystals is dependent upon the use of expensive organics with limited commercial relevance. Herein, we report the generation of zeolite L crystals with uniform sizes less than 30 nm using a facile, organic‐free method. Time‐resolved analysis of precursor assembly and evolution during nonclassical crystallization highlights key differences among silicon sources. Our findings reveal that a homogenous dispersion of potassium ions throughout silicate precursors leads to the formation of a metastable nonporous phase, which undergoes an intercrystalline transformation to zeolite L. The generation of highly interdispersed alkali‐silicate precursors is seemingly critical to enhancing the rate of nucleation and facilitating the formation of ultrasmall crystal.

Li, Rui↗

Achieving Atomic Dispersion of Highly Loaded Transition Metals in Small‐Pore Zeolite SSZ‐13: High‐Capacity and High‐Efficiency Low‐Temperature CO and Passive NO x Adsorbers

Abstract The majority of harmful atmospheric CO and NO x emissions are from vehicle exhausts. Although there has been success addressing NO x emissions at temperatures above 250 °C with selective catalytic reduction technology, emissions during vehicle cold start (when the temperature is below 150 °C), are a major challenge. Herein, we show we can completely eliminate both CO and NO x emissions simultaneously under realistic exhaust flow, using a highly loaded (2 wt %) atomically dispersed palladium in the extra‐framework positions of the small‐pore chabazite material as a CO and passive NO x adsorber. Until now, atomically dispersed highly loaded (>0.3 wt %) transition‐metal/SSZ‐13 materials have not been known. We devised a general, simple, and scalable route to prepare such materials for Pt II and Pd II . Through spectroscopy and materials testing we show that both CO and NO x can be simultaneously completely abated with 100 % efficiency by the formation of mixed carbonyl‐nitrosyl palladium complex in chabazite micropore.

Khivantsev, Konstantin↗

Modulation versus Templating: Fine‐Tuning of Hierarchally Porous PCN‐250 Using Fatty Acids To Engineer Guest Adsorption

Abstract Modulation and templating are two synthetic techniques that have garnered significant attention over the last several years for the preparation of hierarchically porous metal–organic frameworks (HP‐MOFs). In this study, by using fatty acids with different lengths and concentrations as dual‐functional modulators/templates, we were able to obtain HP‐MOFs with tunable mesopores that exhibit different pore diameters and locations. We found that the length and concentration of the fatty acids can determine if micelle formation occurs, which in turn dictates the porosity of the resulting HP‐MOFs. The HP‐MOFs with different mesopores differed in their performance in gas uptake and dye adsorption, and the structure–performance relationships were ascribed to the pore diameters and locations. This approach could provide a potentially universal method to efficiently introduce hierarchal mesopores into existing microporous MOF adsorbents with tunable properties.

Kirchon, Angelo↗

Rapid Generation of Hierarchically Porous Metal–Organic Frameworks through Laser Photolysis

Abstract Hierarchically porous metal–organic frameworks (HP‐MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP‐MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP‐MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing‐cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP‐MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.

Wang, Kun‐Yu↗

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗

A Self‐Consistent Model for Sorption and Transport in Polyimide‐Derived Carbon Molecular Sieve Gas Separation Membranes

Abstract Demand for energy‐efficient gas separations exists across many industrial processes, and membranes can aid in meeting this demand. Carbon molecular sieve (CMS) membranes show exceptional separation performance and scalable processing attributes attractive for important, similar‐sized gas pairs. Herein, we outline a mathematical and physical framework to understand these attributes. This framework shares features with dual‐mode transport theory for glassy polymers; however, physical connections to CMS model parameters differ from glassy polymer cases. We present evidence in CMS membranes for a large volume fraction of microporous domains characterized by Langmuir sorption in local equilibrium with a minority continuous phase described by Henry's law sorption. Using this framework, expressions are provided to relate measurable parameters for sorption and transport in CMS materials. We also outline a mechanism for formation of these environments and suggest future model refinements.

Sanyal, Oishi↗

Palladium/Ferrierite versus Palladium/SSZ‐13 Passive NOx Adsorbers: Adsorbate‐Controlled Location of Atomically Dispersed Palladium(II) in Ferrierite Determines High Activity and Stability**

Abstract Pd‐loaded FER and SSZ‐13 zeolites as low‐temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. The NO release temperature of both adsorbers decreases gradually with an increase in CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano‐“hot spot” formation during CO oxidation. Dissimilar to Pd/SSZ‐13, increasing the CO concentration above ≈1000 ppm improves the NOx storage significantly for Pd/FER, which was attributed to the presence of Pd ions in FER sites that are shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 800 °C in 10 % H 2 O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Thus, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

Khivantsev, Konstantin↗

High‐Capacity Splitting of Mono‐ and Dibranched Hexane Isomers by a Robust Zinc‐Based Metal–Organic Framework

Abstract High‐efficiency separation of C 6 alkanes, particularly the mono‐ and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size‐exclusion by a microporous MOF, Zn‐tcpt (H 3 tcpt=2,4,6‐tris(4‐carboxyphenoxy)‐1,3,5‐triazine), with a two‐fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono‐ and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn‐tcpt, and the size‐exclusion based separation mechanism has been confirmed by ab initio materials modeling. The high‐efficiency separation of alkane isomers by Zn‐tcpt can be attributed to its optimal pore dimensions as well as high porosity.

Yu, Liang↗

Temperature‐Programmed Separation of Hexane Isomers by a Porous Calcium Chloranilate Metal‐Organic Framework

Abstract The full separation of alkane isomers as a function of different degrees of branching remains a daunting challenge due to its stringent requirement with respect to pore dimensions of the adsorbents. In this work, we report a novel microporous coordination network built on calcium (II) and chloranilate. The compound has a flexible framework and exhibits temperature‐dependent adsorption behavior toward hexane isomers. At 30 °C, it accommodates substantial amounts of linear and monobranched hexanes but fully excludes their dibranched isomer, and at elevated temperatures such as 150 °C, it acts as a splitter for linear and branched alkanes. Its capability of efficient discrimination of hexane isomers as a function of branching is verified by experimental breakthrough measurements. Ab initio calculations have uncovered the underlying selective size‐exclusion separation mechanism.

Lin, Yuhan↗

Construction of Boron‐ and Nitrogen‐Enriched Nanoporous π‐Conjugated Networks Towards Enhanced Hydrogen Activation

Abstract Boron‐enriched scaffolds have demonstrated unique features and promising performance in the field of catalysis towards the activation of small gas molecules. However, there is still a lack of facile approaches capable of achieving high B doping and abundant porous channels in the targeted catalysts. Herein, construction of boron‐ and nitrogen‐enriched nanoporous π‐conjugated networks (BN‐NCNs) was achieved via a facile ionothermal polymerization procedure with hexaazatriphenylenehexacarbonitrile [HAT(CN) 6 ] sodium borohydride as the starting materials. The as‐produced BN‐NCN scaffolds were featured by high heteroatoms doping (B up to 23 wt. % and N: up to 17 wt. %) and permanent porosity (surface area up to 759 m 2 g −1 mainly contributed by micropores). With the unsaturated bonded B species acting as the active Lewis acid sites and defected N species acting as the active Lewis base sites, those BN‐NCNs delivered attractive catalytic performance towards H 2 activation/dissociation in both gaseous and liquid phase, acting as efficient metal‐free heterogeneous frustrated Lewis pairs (FLPs) catalysts in hydrogenation procedures.

Li, Meijia↗

Separating Xylene Isomers with a Calcium Metal‐Organic Framework

Abstract The purification of p‐xylene (pX) from its xylene isomers represents a challenging but important industrial process. Herein, we report the efficient separation of pX from its ortho‐ and meta‐ isomers by a microporous calcium‐based metal–organic framework material (HIAM‐203) with a flexible skeleton. At 30 °C, all three isomers are accommodated but the adsorption kinetics of o‐xylene (oX) and m‐xylene (mX) are substantially slower than that of pX, and at an elevated temperature of 120 °C, oX and mX are fully excluded while pX can be adsorbed. Multicomponent column breakthrough measurements and vapor‐phase/liquid‐phase adsorption experiments have demonstrated the capability of HIAM‐203 for efficient separation of xylene isomers. Ab initio calculations have provided useful information for understanding the adsorption mechanism.

Yu, Liang↗

Zr‐Porphyrin Metal–Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

Abstract We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium‐metalloporphyrin framework, specifically PCN‐222. PCN‐222 has been selected for its 1D mesoporous channels, high water‐stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)‐assisted method for the synthesis of nanosized PCN‐222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN‐222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN‐222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water‐to‐hydrate conversion. Unfortunately, PCN‐222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.

Carrillo‐Carrión, Carolina↗

Crystallographic Observation of Dynamic Gas Adsorption Sites and Thermal Expansion in a Breathable Fluorous Metal?Organic Framework

Playing accordion: Cooling a single crystal of a microporous fluorous metal-organic framework under ambient atmosphere leads to very large breathing upon gas adsorption, during which multiple N2 molecules are filled into channels and cages (see picture). While the framework exhibits remarkable positive thermal expansion under vacuum, a gigantic apparent negative thermal expansion takes place when the crystal is exposed to N2 at ambient pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Post-Synthetic Modification of Porphyrin-Encapsulating Metal-Organic Materials by Cooperative Addition of Inorganic Salts to Enhance CO 2 /CH 4 Selectivity

Keeping MOM: Reaction of biphenyl-3,4',5-tricarboxylate and Cd(NO 3 ) 2 in the presence of meso-tetra(N-methyl-4-pyridyl)porphine tetratosylate afforded porph@MOM-11, a microporous metal–organic material (MOM) that encapsulates cationic porphyrins and solvent in alternating open channels. Porph@MOM-11 has cation and anion binding sites that facilitate cooperative addition of inorganic salts (such as M + Cl - ) in a stoichiometric fashion.

Zhang, Zhenjie↗

Macromolecular Design Strategies for Preventing Active-Material Crossover in Non-Aqueous All-Organic Redox-Flow Batteries

Intermittent energy sources, including solar and wind, require scalable, low-cost, multi-hour energy storage solutions in order to be effectively incorporated into the grid. All-Organic non-aqueous redox-flow batteries offer a solution, but suffer from rapid capacity fade and low Coulombic efficiency due to the high permeability of redox-active species across the battery's membrane. In this paper, we show that active-species crossover is arrested by scaling the membrane's pore size to molecular dimensions and in turn increasing the size of the active material above the membrane's pore-size exclusion limit. When oligomeric redox-active organics (RAOs) were paired with microporous polymer membranes, the rate of active-material crossover was reduced more than 9000-fold compared to traditional separators at minimal cost to ionic conductivity. This corresponds to an absolute rate of RAO crossover of less than 3 μmol cm -2 day -1 (for a 1.0 m concentration gradient), which exceeds performance targets recently set forth by the battery industry. Finally, this strategy was generalizable to both high and low-potential RAOs in a variety of non-aqueous electrolytes, highlighting the versatility of macromolecular design in implementing next-generation redox-flow batteries.

25 ENERGY STORAGE↗

Rapid Generation of Hierarchically Porous Metal–Organic Frameworks through Laser Photolysis

Hierarchically porous metal–organic frameworks (HP-MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP-MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP-MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing-cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP-MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗