Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Mean flow field and surface heating produced by unequal shock interactions at hypersonic speeds

Mean velocity profiles were measured in a free shear layer produced by the interaction of two unequal strength shock waves at hypersonic free-stream Mach numbers. Measurements were made over a unit Reynolds number range of 3,770,000 per meter to 17,400,000 per meter based on the flow on the high velocity side of the shear layer. The variation in measured spreading parameters with Mach number for the fully developed flows is consistent with the trend of the available zero velocity ratio data when the Mach numbers for the data given in this study are taken to be characteristic Mach numbers based on the velocity difference across the mixing layer. Surface measurements in the shear-layer attachment region of the blunt-body model indicate peak local heating and static pressure consistent with other published data. Transition Reynolds numbers were found to be significantly lower than those found in previous data.

Birch, S. F.↗
NASA NTRS1975

Propagation of high amplitude higher order sounds in slightly soft rectangular ducts, carrying mean flow

The resonance expansion method, developed to study the propagation of sound in rigid rectangular ducts is applied to the case of slightly soft ducts. Expressions for the generation and decay of various harmonics are obtained. The effect of wall admittance is seen through a dissipation function in the system of nonlinear differential equations, governing the generation of harmonics. As the wall admittance increases, the resonance is reduced. For a given wall admittance this phenomenon is stronger at higher input intensities. Both the first and second order solutions are obtained and the results are extended to the case of ducts having mean flow.

Wang, K. S.↗
NASA NTRS1976

The prediction of sea-surface temperature variations by means of an advective mixed-layer ocean model

An advective mixed layer ocean model was developed by eliminating the assumption of horizontal homogeneity in an already existing mixed layer model, and then superimposing a mean and anomalous wind driven current field. This model is based on the principle of conservation of heat and mechanical energy and utilizes a box grid for the advective part of the calculation. Three phases of experiments were conducted: evaluation of the model's ability to account for climatological sea surface temperature (SST) variations in the cooling and heating seasons, sensitivity tests in which the effect of hypothetical anomalous winds was evaluated, and a thirty-day synoptic calculation using the model. For the case studied, the accuracy of the predictions was improved by the inclusion of advection, although nonadvective effects appear to have dominated.

Atlas, R. M.↗
NASA NTRS1976

Estimation of daily mean air temperature from satellite derived radiometric data

The Screwworm Eradication Data System (SEDS) at JSC utilizes satellite derived estimates of daily mean air temperature (DMAT) to monitor the effect of temperature on screwworm populations. The performance of the SEDS screwworm growth potential predictions depends in large part upon the accuracy of the DMAT estimates.

Phinney, D.↗
NASA NTRS1975

Mean effective size and refractive index of transparent atmospheric particulates

It is demonstrated that the scattering ratio-principle originally restricted to exact forward and exact backward scattering, and to values of the size parameter and of the product (refractive index x size parameter) less than 0.8 has a much wider applicability. After relaxing these stringent conditions, it is also shown that this principle can be retained as the basis of an experimental technique for retrieving the mean effective size and refractive index of transparent atmospheric particulates.

Fymat, A. L.↗
NASA NTRS1975

Inelastic-interaction mean free path of negative pions in tungsten

The inelastic-interaction mean free paths (lambda) of 5-, 10-, and 15-GeV/c pions have been measured by determining the distribution of first-interaction locations in a modular tungsten-scintillator ionization spectrometer. In addition to commonly used interaction signatures of a few (2-5) particles in two or three consecutive modules, a chi-squared distribution is employed to calculate the probability that the first interaction occurred at a specific depth in the spectrometer. This latter technique seems to be more reliable than use of the simpler criteria. No significant dependence of lambda on energy has been observed. In tungsten, lambda for pions is 206 (plus or minus 6) g/sq cm.

Cheshire, D. L.↗
NASA NTRS1975

Mean rates of the orbital elements of a satellite perturbed by a lens shaped mass concentration

Long arc gravity analysis of lunar orbiter tracking data in the past has been carried out with the help of averaged equations of motion, in which short period effects have been suppressed. This procedure has required that the harmonic terms in the gravity potential be averaged over an orbital period. In the present paper, this technique is extended to mass points and mass disks in the gravity field. This requires the evaluation of expressions for the mean rates of the orbit elements for a satellite perturbed by a lens shaped mass concentration. Corresponding expressions for the perturbations due to a mass point are obtained in the limit as the lens radius goes to zero. The derived equations have been programmed on the UNIVAC 1108 computer, and the results checked by numerical differencing.

Ananda, M.↗
NASA NTRS1976

Effects of mean flow on duct mode optimum suppression rates

The nature of the solution to the convected acoustic wave equation and associated boundary conditions for rectangular ducts containing uniform mean flow is examined in terms of the complex mapping between the wall admittance and characteristic mode eigenvalues. It is shown that the Cremer optimum suppression criteria must be modified to account for the effects of flow below certain critical values of the nondimensional frequency parameter of duct height divided by sound wavelength. The implications of these results on the design of low frequency suppressors are considered.

Kraft, R. E.↗
NASA NTRS1976

A numerical study of the radiative-dynamic interaction in the stratosphere by a time-dependent zonal mean circulation model

The response of a zonal mean circulation model was compared to different heating functions used to simulate the interannual climate cycle. Two heating functions were used: A simple Newtonian heating function and a sophisticated heating function (Ramanathan, 1976). The emphasis was on the coupling between radiative transfer and the circulation in the stratosphere. The model was formulated in terms of primitive equations with 10 deg latitudinal resolution and 18 levels in pressure. Eddy transport of heat in the stratosphere was treated by the Reed and German (1965) formulation, while Stone's (1973) formulation is used in the troposphere. Momentum eddy fluxes are specified by climate statistics after Harwood and Pyle (1975). The model dynamics resulting from the two runs are compared to demonstrate the benefits of using detailed heating functions.

Turner, R. E.↗
NASA NTRS1977

Viking S-band Doppler RMS phase fluctuations used to calibrate the mean 1976 equatorial corona

Viking S-band Doppler RMS phase fluctuations (noise) and comparisons of Viking Doppler noise to Viking differenced S-X range measurements are used to construct a mean equatorial electron density model for 1976. Using Pioneer Doppler noise results (at high heliographic latitudes, also from 1976), an equivalent nonequatorial electron density model is approximated.

Berman, A. L.↗
NASA NTRS1977

Availability and mean time between failures of redundant systems with random maintenance of subsystems

It is shown how the availability and MTBF (Mean Time Between Failures) of a redundant system with subsystems maintenanced at the points of so-called stationary renewal processes can be determined from the distributions of the intervals between maintenance actions and of the failure-free operating intervals of the subsystems. The results make it possible, for example, to determine the frequency and duration of hidden failure states in computers which are incidentally corrected during the repair of observed failures.

Schneeweiss, W.↗
NASA NTRS1977

Representation of turbulent shear stress by a product of mean velocity differences

A quadratic form in the mean velocity for the turbulent shear stress is presented. It is expressed as the product of two velocity differences whose roots are the maximum velocity in the flow and a cutoff velocity below which the turbulent shear stress vanishes. Application to pipe and channel flows yields the centerline velocity as a function of pressure gradient, as well as the velocity profile. The flat plate, boundary-layer problem is solved by a system of integral equations to obtain friction coefficient, displacement thickness, and momentum-loss thickness. Comparisons are made with experiment.

Braun, W. H.↗
NASA NTRS1977

Mean velocity, turbulence intensity, and scale in a subsonic turbulent jet impinging normal to a large flat plate

To explain the increase in noise when a jet impinges on a large flat plate, mean velocity, turbulence intensity, and scale were measured at nominal nozzle-exit velocities of 61, 138, and 192 meters per second with the plate located 7.1 nozzle-exit diameters from the nozzle. The maximum turbulence intensities in free and impinging jets were about the same; however, the integral length scale near the plate surface was only about one-half the free jet scale. The measured intensities and length scales, in conjunction with a contemporary theory of aerodynamic noise, provided a good explanation for the observed increase in noise associated with the impinging jet. An increase in the volume of highly turbulent flow could be the principal reason for the increase in noise.

Boldman, D. R.↗