Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “map accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Image processing of HCMM-satellite thermal images for superposition with other satellite imagery and topographic and thematic maps

The southwestern part of Central Europe between Basal and Frankfurt was used in a study to determine the accuracy with which a regionally bounded HCMM scene could be rectified with respect to a preassigned coordinate system. The scale to which excerpts from HCMM data can be sensibly enlarged and the question of how large natural structures must be in order to be identified in a satellite thermal image with the given resolution were also examined. Relief and forest and population distribution maps and a land use map derived from LANDSAT data were digitalized and adapted to a common reference system and then combined in a single multichannel data system. The control points for geometrical rectification were determined using the coordinates of the reference system. The multichannel scene was evaluated in several different manners such as the correlation of surface temperature and relief, surface temperature and land use, or surface temperature and built up areas.

Gossmann, H.↗
NASA NTRS2012

Thermal Properties of Unusual Local-Scale Features on Vesta

On Vesta, the thermal behavior of areas of unusual albedo seen at the local scale can be related to physical properties that can provide information about the origin of those materials. We used Dawn s Visible and Infrared Mapping Spectrometer (VIR) hyperspectral cubes to retrieve surface temperatures and emissivities, with high accuracy as long as temperatures are greater than ~180 K. Data acquired in the Survey phase (23 July through 29 August 2011) show several unusual surface features: 1) high-albedo (bright) and low-albedo (dark) material deposits, 2) spectrally distinct ejecta and pitted materials, 3) regions suggesting finer-grained materials. Some of the unusual dark and bright features were reobserved by VIR in the subsequent High-Altitude Mapping Orbit (HAMO) and Low- Altitude Mapping Orbit (LAMO) phases at increased pixel resolution. In this work we present temperature maps and emissivities of several local-scale features that were observed by Dawn under different illumination conditions and different local solar times. Data from VIR's IR channel show that bright regions generally correspond to regions with lower thermal emission, i.e. lower temperature, while dark regions correspond to areas with higher thermal emission, i.e. higher temperature. This behavior confirms that many of the dark appearances in the VIS mainly reflect albedo variations, and not, for example, shadowing. During maximum daily insolation, dark features in the equatorial region may rise to temperatures greater than 270 K, while brightest features stop at roughly 258 K, local solar time being similar. However, pitted materials, showing relatively low reflectance, have significantly lower temperatures, as a result of differences in composition and/or structure (e.g, average grain size of the surface regolith, porosity, etc.). To complement this work, we provide preliminary values of thermal inertia for some bright and dark features.

Capria, M.↗
DOE OSTI2022

A phenology- and trend-based approach for accurate mapping of sea-level driven coastal forest retreat

The rapid replacement of upland forest by encroaching marshland is a striking manifestation of global sea-level rise (SLR). Timely and high-resolution information on the location and extent of transition forest (the ecotone between upland forest and marsh where tree mortality due to seawater intrusion begins) is fundamental to understanding the processes and patterns of SLR-driven landscape reorganization. Despite its significance, accurate characterization of salt-impacted transition forest remains challenging due to the complexity of coastal environments, scarcity of ground-truth data, and the lack of effective mapping algorithms. Here we use the full archive of Landsat images between 1984 and 2021 to investigate the spectral, temporal, and phenological characteristics of transition forest, and develop a robust framework for monitoring coastal vegetation shifts in the mid-Atlantic U.S., a global SLR hotspot. Here, we found that transition forest exhibits strong negative NDVI trends and a deviation of land surface phenology from marsh and upland forest that distinguishes itself from surrounding vegetation. By integrating temporal trends and land surface phenology, our results demonstrate superior discrimination between marsh and coastal forests to existing map products (e.g. NOAA Coastal Change Analysis Program, National Land Cover Database) that allows a reliable identification of the coastal treeline. We applied the approach to map regional land cover in 1985, 2000 and 2020 (overall classification accuracy >92%) and found that the area of coastal forest decreased by 22.0% from 1985 to 2020, the majority of which transitioned to marshland (92.3%, 5.3 × 10 3 ha). Based upon fine-scale patterns of coastal transgression, we created a practical workflow for spatially explicit quantification of forest retreat rates. Concurrent with rising sea level, coastal forests migrated upslope from 0.63 (± 0.27) m above sea level in 1985 to 0.78 (± 0.32) m above sea level in 2020, and horizontal forest retreat rates accelerated from 3.1 (range of 0–36) m yr -1 during 1985–2000 to 4.7 (0–55) m yr -1 during 2001–2020. As SLR continues to accelerate, our study may serve as a scalable solution for consistent tracking of coastal landscape evolution that is urgently needed for sustainable forest and wetland management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Data Mining for Faster, Interpretable Solutions to Inverse Problems:A Case Study Using Additive Manufacturing

Solving inverse problems, where we nd the input values that result in desired values of outputs, can be challenging. The solution process is often computationally expensive and it can be di cult to interpret the solution in high-dimensional input spaces. In this paper, we use a problem from additive manufacturing to address these two issues with the intent of making it easier to solve inverse problems and exploit their results. First, focusing on Gaussian process surrogates that are used to solve inverse problems, we describe how a simple modi cation to the idea of tapering can substantially speed up the surrogate without losing accuracy in prediction. Second, we demonstrate that Kohonen self-organizing maps can be used to visualize and interpret the solution to the inverse problem in the high-dimensional input space. For our data set, as not all input dimensions are equally important, we show that using weighted distances results in a better organized map that makes the relationships among the inputs obvious

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

An Assessment of the Influence of Uncertainty in Temporally Evolving Streamflow Forecasts on Riverine Inundation Modeling

Continental-scale river forecasting platforms forecast streamflow at reaches that can be used as boundary conditions to drive a local-scale flood inundation model. Uncertainty accumulated during this process stems not only from any part of the forecasting chain but can also be caused by the daily variations in weather forcing that keeps evolving as the event advances. This work aims to examine the influence of the evolving forecast streamflow on predicting the maximum inundation for extreme floods. A diagnostic case study was made on the basis of a hindcast of Hurricane Matthew striking the eastern U.S. in 2016. The U.S. National Water Model was one-way coupled to a hydrodynamic inundation model through a developed automated workflow. Although the river forcing has significantly mismatched hydrographs versus observations, the simulated peak water surface elevations and maximum extents were validated to be comparable with the observations, which indicates that the inundation model may not be sensitive to the inherited uncertainty from the weather forcing. Moreover, the uncertainty of the forecast streamflow time series caused only one order of magnitude fewer variations in inundation prediction; this dampening effect may become clearer for extreme events with large areas inundated. In addition, the forecast total volume of stream discharge appears to be an important metric for assessing the performance of river forcing for inundation mapping, as a linear correlation between the total volume and the accuracy of the predicted peak water surface elevation and maximum extent was found, with the coefficients of determination all above 0.8. Extra best-practice experience of running similar operational tasks demonstrated the tradeoff between the cost and accuracy gain.

flood, national water model, RIFT↗
NASA NTRS1973

Terrain classification maps of Yellowstone National Park

A cooperative ERTS-1 investigation involving U. S. Geological Survey, National Park Service, and Environmental Research Institure of Michigan (ERIM) personnel has as its goal the preparation of terrain classification maps for the entire Yellowstone National Park. Excellent coverage of the park was obtained on 6 August 1972 (frame 1015-17404). Preliminary terrain classification maps have been prepared at ERIM by applying multispectral pattern recognition techniques to ERTS-MSS digital taped data. The color coded terrain maps are presented and discussed. The discussion includes qualitative and quantitative accuracy estimates and discussion of processing techniques.

Thomson, F. J.↗
NASA NTRS1973

A study of the utilization of ERTS-1 data from the Wabash River Basin

The author has identified the following significant results. In soil association mapping, computerized analysis of ERTS-1 MSS data has yielded images which will prove useful in the ongoing Cooperative Soil Survey program, involving the Soil Conservation Service of USDA and other state and local agencies. In the present mode of operation, a soil survey for a county may take up to 5 years to be completed. Results indicate that a great deal of soils information can be extracted from ERTS-1 data by computer analysis. This information is expected to be very valuable in the premapping conference phase of a soil survey, resulting in more efficient field operations during the actual mapping. In the earth surface features mapping effort it was found that temporal data improved the classification accuracy of forest classification in Tippecanoe County, Indiana. In water resources study a severe scanner look angle effect was observed in the aircraft scanner data of a test lake which was not present in ERTS-1 data of the same site. This effect was greatly accentuated by surface roughness caused by strong winds. Quantitative evaluation of urban features classification in ERTS-1 data was obtained. An 87.1% test accuracy was obtained for eight categories in Marion County, Indiana.

Landgrebe, D. A.↗
NASA NTRS1975

Coastal Zone Classification from Satellite Imagery

The author has identified the following significant results. Studies of cover distribution along Delaware's coast, especially in tidal wetlands, were made utilizing semi-automated analysis of LANDSAT-1 MSS digital data. Cover maps with eleven vegetation and other cover categories were produced with accuracy of identification above 80% in all categories. Recent studies have tested a new technique for training automated analysis which uses ground measured reflectance and atmospheric correction techniques to derive signatures for specific categories in preference to the relative radiance signatures derived from training sets within the LANDSAT data itself. Initial tests using a four category scheme indicate that training data based on absolute measured reflectance and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more conventional relative radiance training.

Klemas, V.↗
NASA NTRS1976

Coastal zone classification from satellite imagery

The author has identified the following significant results. Studies of cover distribution along Delaware's coast, especially in tidal wetlands, were made, utilizing semi-automated analysis of LANDSAT-1 MSS digital data. Cover maps with eleven vegetation and other cover categories were produced with accuracy of identification above 80% in all categories. Recent studies have tested a new technique for training automated analysis which uses ground measured reflectance and atmospheric correction techniques to derive signatures for specific categories in preference to the relative radiance signatures derived from training sets within LANDSAT data itself. Initial tests using a four category scheme indicate that training data based on absolute measured reflectance and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more conventional relative radiance training. The analysis of the same four categories produced average categorization accuracies of 82.1% by conventional reflative radiance training and 81.9% by use of absolute reflectance signatures.

Klemas, V.↗
NASA NTRS1976

Overall evaluation of LANDSAT (ERTS) follow-on imagery for cartographic application

The author has identified the following significant results. The NASA/Cousteau experiment showed that under suitable conditions and with calibration data, the bottom of clear tropical seas can be mapped with LANDSAT to a depth of 22 meters with a root-mean-square error of about 10 percent. This application required the high gain setting of band 4 of the MSS. The experiment also confirmed that a somewhat lower waveband than band 4 would increase the water penetration capability of future LANDSATS. Other experiments illustrated by the reprinting of upper Chesapeake Bay indicate that the original LANDSAT signals must be modulated and optimized for the photographic and lithographic processes. Work by the Canadian mapping agency indicates significant improvements in the control identification and geometric accuracy of LANDSAT cartographic applications.

Colvocoresses, A. P.↗
NASA NTRS1980

Numerical simulation of shear flows over wavy boundaries

The full time-dependent two dimensional Navier-Stokes equations are solved using spectral methods to achieve high spatial accuracy and high order time-splitting methods together with conformal mapping methods to allow simulation of flow over steep waves, including general turbulent Reynolds stresses. The programs are used to study the properties of laminar and turbulent flow over a flat plate and in various wavy geometries. Results are compared with both available theory and experiment. For laminar flow, good agreement is achieved. For turbulent flow, the agreement is less satisfactory and may be explained by the simplified turbulent modelling use in the calculations.

Orszag, S. A.↗
NASA NTRS1986

Delineation of fault zones using imaging radar

The assessment of earthquake hazards and mineral and oil potential of a given region requires a detailed knowledge of geological structure, including the configuration of faults. Delineation of faults is traditionally based on three types of data: (1) seismicity data, which shows the location and magnitude of earthquake activity; (2) field mapping, which in remote areas is typically incomplete and of insufficient accuracy; and (3) remote sensing, including LANDSAT images and high altitude photography. Recently, high resolution radar images of tectonically active regions have been obtained by SEASAT and Shuttle Imaging Radar (SIR-A and SIR-B) systems. These radar images are sensitive to terrain slope variations and emphasize the topographic signatures of fault zones. Techniques were developed for using the radar data in conjunction with the traditional types of data to delineate major faults in well-known test sites, and to extend interpretation techniques to remote areas.

Toksoz, M. N.↗
NASA NTRS1994

Hubble Space Telescope Planetary Camera observations of Arp 220

Planetary Camera images of peculiar galaxy Arp 220 taken with V, R, and I band filters reveal a very luminous object near the position of the western radio continuum source, assumed to be the major nucleus, ans seven lesser objects within 2 sec of this position. The most luminous object is formally coincident with the radio source to within the errors of Hubble Space Telescope (HST) pointing accuracy, but we have found an alternate, more compelling alignment of maps in which the eastern radio source coincides with one of the lesser objects and the OH radio sources reside near the surfaces of other optical objects. The proposed centering places the most luminous object 150 pc (0.4 sec) away from the western radio source. We explore the possibilities that the objects are either holes in the dense dust distribution, dusty clouds reflecting a hidden bright nucleus, or associations of bright young stars. We favor the interpretation that at least the brightest two objects are massive young star associations with luminosities 10(exp 9) to 10(exp 11) solar luminosity, but highly extinguished by intervening dust. These massive associations should fall into the nucleus on a time scale of 10(exp 8) yr. About 10% of the enigmatic far-IR flux arises from the observed objects. In addition, if the diffuse starlight out to a radius of 8 sec is dominated by stars with typical ages of order 10(exp 8) yr (the time since the alleged merger of two galaxies), as indicated by the blue colors at larger radius, then the lower limit to the reradiation of diffuse starlight contributes 3 x 10(exp 11) solar luminosity to the far-infrared flux, or greater than or equal to 25% of the total far-IR flux. Three additional bright objects (M(sub V) approximately equals -13) located about 6 sec from the core are likely young globular clusters, but any of these could be recently exploded supernovae instead. The expected supernovae rate, if the dominant energy source is young stars, is about one per month for the region where the intense far-infrared flux originates. Also, individual giant dust clouds are visible in these images. Their typical size is 300 pc (1 sec).

Shaya, Edward J.↗
NASA NTRS2000

Modeling Molecules

The molecule modeling method known as Multibody Order (N) Dynamics, or MBO(N)D, was developed by Moldyn, Inc. at Goddard Space Flight Center through funding provided by the SBIR program. The software can model the dynamics of molecules through technology which stimulates low-frequency molecular motions and properties, such as movements among a molecule's constituent parts. With MBO(N)D, a molecule is substructured into a set of interconnected rigid and flexible bodies. These bodies replace the computation burden of mapping individual atoms. Moldyn's technology cuts computation time while increasing accuracy. The MBO(N)D technology is available as Insight II 97.0 from Molecular Simulations, Inc. Currently the technology is used to account for forces on spacecraft parts and to perform molecular analyses for pharmaceutical purposes. It permits the solution of molecular dynamics problems on a moderate workstation, as opposed to on a supercomputer.

Source record↗
NASA NTRS2002

Improving Land Cover Product-Based Estimates of the Extent of Fragmented Cover Types

The effects of changing land use/land cover on regional and global climate ecosystems depends on accurate estimates of the extent of critical land cover types such as Arctic wetlands and fire scars in boreal forests. To address this information requirement, land cover products at coarse spatial resolution such as Advanced Very High Resolution Radiometer (AVHRR) -based maps and the MODIS Land Cover Product are being produced. The accuracy of the extent of highly fragmented cover types such as fire scars and ponds is in doubt because much (the numerous scars and ponds smaller than the pixel size) is missed. A promising method for improving areal estimates involves modeling the observed distribution of the fragment sizes as a type of truncated distribution, then estimating the sum of unobserved sizes in the lower, truncated tail and adding it to the sum of observed fragment sizes. The method has been tested with both simulated and actual cover products.

Hlavka, Christine A.↗
NASA NTRS2005

Global monitoring of Sea Surface Salinity with Aquarius

Aquarius is a microwave remote sensing system designed to obtain global maps of the surface salinity field of the oceans from space. It will be flown on the Aquarius/SAC-D mission, a partnership between the USA (NASA) and Argentina (CONAE) with launch scheduled for late in 2008. The objective of Aquarius is to monitor the seasonal and interannual variation of the large scale features of the surface salinity field in the open ocean. This will provide data to address scientific questions associated with ocean circulation and its impact on climate. For example, salinity is needed to understand the large scale thermohaline circulation, driven by buoyancy, which moves large masses of water and heat around the globe. Of the two variables that determine buoyancy (salinity and temperature), temperature is already being monitored. Salinity is the missing variable needed to understand this circulation. Salinity also has an important role in energy exchange between the ocean and atmosphere, for example in the development of fresh water lenses (buoyant water that forms stable layers and insulates water below from the atmosphere) which alter the air-sea coupling. Aquarius is a combination radiometer and scatterometer (radar) operating at L-band (1.413 GHz for the radiometer and 1.26 GHz for the scatterometer). The primary instrument,for measuring salinity is the radiometer which is able to detect salinity because of the modulation salinity produces on the thermal emission from sea water. This change is detectable at the long wavelength end of the microwave spectrum. The scatterometer will provide a correction for surface roughness (waves) which is one of the greatest unknowns in the retrieval. The sensor will be in a sun-synchronous orbit at about 650 km with equatorial crossings of 6am/6pm. The antenna for these two instruments is a 3 meter offset fed reflector with three feeds arranged in pushbroom fashion looking away from the sun toward the shadow side of the orbit to minimize sunglint. The mission goal is to produce maps of the salinity field globally once each month with an accuracy of 0.2 psu and a spatial resolution of 100 km. This will be adequate to address l&ge scale features of the salinity field of the open ocean. The temporal resolution is sufficient to address seasonal changes and a three year mission is planned to-collect sufficient data to look for interannual variation. Aquarius is being developed by NASA as part of the Earth System Science Pathfinder (ESSP) program. The SAC-D mission is being developed by CONAE and will include the space craft and several additional instruments, including visible and infrared cameras and a microwave radiometer to monitor rain and wind velocity over the oceans, and sea ice.

Lagerloef, G. S. E.↗
NASA NTRS2006

On the Development of an Efficient Parallel Hybrid Solver with Application to Acoustically Treated Aero-Engine Nacelles

A finite element solution to the convected Helmholtz equation in a nonuniform flow is used to model the noise field within 3-D acoustically treated aero-engine nacelles. Options to select linear or cubic Hermite polynomial basis functions and isoparametric elements are included. However, the key feature of the method is a domain decomposition procedure that is based upon the inter-mixing of an iterative and a direct solve strategy for solving the discrete finite element equations. This procedure is optimized to take full advantage of sparsity and exploit the increased memory and parallel processing capability of modern computer architectures. Example computations are presented for the Langley Flow Impedance Test facility and a rectangular mapping of a full scale, generic aero-engine nacelle. The accuracy and parallel performance of this new solver are tested on both model problems using a supercomputer that contains hundreds of central processing units. Results show that the method gives extremely accurate attenuation predictions, achieves super-linear speedup over hundreds of CPUs, and solves upward of 25 million complex equations in a quarter of an hour.

Watson, Willie R.↗
NASA NTRS2000

Space Radiation Absorbed Dose Distribution in a Human Phantom Torso

The flight of a human phantom torso with head that containing active dosimeters at 5 organ sites and 1400 TLDs distributed in 34 1" thick sections is described. Experimental dose rates and quality factors are compared with calculations for shielding distributions at the sites using the Computerized Anatomical Male (CAM) model. The measurements were complemented with those obtained from other instruments. These results have provided the most comprehensive data set to map the dose distribution inside a human and to assess the accuracy of radiation transport models and astronaut radiation risk.

Badhwar, G. D.↗