Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lorentz factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Preparation and characterization of Pb(Lu1/2Nb1/2)O3-Pb(Ni1/3Nb2/3)O3-PbTiO3 ternary ferroelectric ceramics with high piezoelectric constant

Highlights: • PLN-PNN-PT ternary ferroelectric systems were prepared by two-step method. • PLN-PNN-PT ceramics exhibit typical relaxor behavior. • 0.17PLN-0.47PNN-0.36PT ceramic has optimal properties (T{sub C} ∼ 142 °C, d{sub 33} ∼ 378 pC/N). - Abstract: Pb(Lu{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Ni{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} ferroelectric ceramics were successfully prepared by a modified two-step columbite precursor method. The structural, dielectric, ferroelectric and piezoelectric properties were characterized by X-ray diffraction, ferroelectric and dielectric measurements. All the obtained samples have pure perovskite structure. The composition of 0.17PLN-0.47PNN-0.36PT within morphotropic phase boundary exhibits optimal properties with piezoelectric coefficient d{sub 33} = 378 pC/N, Curie temperature Tc = 142 °C, dielectric constant ε΄ = 4700, dielectric loss tangent tanδ = 0.05, remnant polarization Pr = 27.1 μC/cm{sup 2} and coercive field Ec = 8.89 KV/cm. According to Curie-Weiss Law and Lorentz-type quadratic relationship, the dielectric behavior was studied and the relaxor factor γ is between 1.55–1.87, indicating the character of diffuse phase transition of the Pb(Lu{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Ni{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} ceramics. The excellent piezoelectric properties and high Curie temperature make this system a promising material for high-power transducer applications in a broad temperature range.

36 MATERIALS SCIENCE↗

Formulation of spin 7/2 and 9/2 nucleon resonance amplitudes for kaon photoproduction off a proton

We have constructed the formulation of scattering amplitude for kaon photoproduction off a proton that includes nucleon resonances with spins 7/2 and 9/2. To this end we start with the formalism of projection operator for higher spins and derive the spins 7/2 and 9/2 projection operators. The corresponding Feynman propagators are obtained from these projection operators. To calculate the scattering amplitude we use the vertex factor proposed by Pascalutsa. The scattering amplitudes are then decomposed into six Lorentz- and gauge-invariant amplitudes, from which the cross section and polarization observables can be calculated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A photoemission moments model using density functional and transfer matrix methods applied to coating layers on surfaces: Theory

Recent experimental measurements of a bulk material covered with a small number of graphene layers reported by Yamaguchi et al. [NPJ 2D Mater. Appl. 1, 12 (2017)] (on bialkali) and Liu et al.[Appl. Phys. Lett. 110, 041607 (2017)] (on copper) and the needs of emission models in beam optics codes have lead to substantial changes in a Moments model of photoemission. The changes account for (i) a barrier profile and density of states factor based on density functional theory (DFT) evaluations, (ii) a Drude-Lorentz model of the optical constants and laser penetration depth, and (iii) a transmission probability evaluated by an Airy Transfer Matrix Approach. Importantly, the DFT results lead to a surface barrier profile of a shape similar to both resonant barriers and reflectionless wells: the associated quantum mechanical transmission probabilities are shown to be comparable to those recently required to enable the Moments (and Three Step) model to match experimental data but for reasons very different than the assumption by conventional wisdom that a barrier is responsible. The substantial modifications of the Moments model components, motivated by computational materials methods, are developed. The results prepare the Moments model for use in treating heterostructures and discrete energy level systems (e.g., quantum dots) proposed for decoupling the opposing metrics of performance that undermine the performance of advanced light sources like the x-ray Free Electron Laser. The consequences of the modified components on quan-tum yield, emittance, and emission models needed by beam optics codes are discussed. Published by AIP Publishing. https://doi.org/10.1063/1.5008600

36 MATERIALS SCIENCE↗

Theoretical spectral distributions and total cross sections for neutral subthreshold pion production in carbon-carbon collisions

A coherent isobar formalism is employed to model subthreshold production of neutral pions in carbon-carbon collisions at energies below 100 MeV/nucleon. No arbitrary scale factors or adjustable free parameters are used in calculation of the Lorentz-invariant cross sections for pion production in the projectile, which produces an excited state that goes to M1 resonance in the target by conservation of spin and isospin. Pion production is also modeled for the projectile, which also reaches M1 resonance. The overall pion spectral distribution in the center of mass system is then integrated over the energy range 35-84 MeV/nucleon. The results expose an energy loss in the incident ions, as observed experimentally, and indicate that an isobar mechanism is responsible for higher energy pion production. Lower energy pions are a result of thermal processes.

Norbury, J. W.↗

A general formalism for phase space calculations

General formulas for calculating the interactions of galactic cosmic rays with target nuclei are presented. Methods for calculating the appropriate normalization volume elements and phase space factors are presented. Particular emphasis is placed on obtaining correct phase space factors for 2-, and 3-body final states. Calculations for both Lorentz-invariant and noninvariant phase space are presented.

Norbury, John W.↗

Flux Rule, U(1) Instanton, and Superconductivity

We examine some consequences of the duality that a U(1) phase factor added on a wave function describes a whole system motion and also plays the role of a U(1) gauge potential. First, we show that the duality solves a long-standing puzzling problem that the ‘flux rule’ (the Faraday’s induction formula) and the Lorentz force calculation for an emf emerging in an electron system moving in a magnetic field give the same result (Feynman et al. 1963). Next, we examine a U(1) phase factor induced on the wave function for an electron system due to the single-valuedness requirement of the wave function with respect to the electron coordinates, and its consequential appearance of a U(1) instanton. This instanton explains the Meissner effect, supercurrent generation, flux quantization in the units of (h/(2e)), and the voltage quantization in the units of ((hf)/(2e)) across the Josephson junction in the presence of a radiation field with frequency f. In the experiment, a radiation field must be present to have a finite voltage across the Josephson junction; but a clear explanation for it has been lacking. The present work provides an explanation for it, and also explains the high precision of the quantized voltage as due to a topological effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

COSMIC TRANSPARENCY: A TEST WITH THE BARYON ACOUSTIC FEATURE AND TYPE Ia SUPERNOVAE

Conservation of the phase-space density of photons plus Lorentz invariance requires that the cosmological luminosity distance be larger than the angular diameter distance by a factor of (1 + z){sup 2}, where z is the redshift. Because this is a fundamental symmetry, this prediction-known sometimes as the 'Etherington relation' or the 'Tolman test'-is independent of the world model, or even the assumptions of homogeneity and isotropy. It depends, however, on Lorentz invariance and transparency. Transparency can be affected by intergalactic dust or interactions between photons and the dark sector. Baryon acoustic feature (BAF) and type Ia supernovae (SNeIa) measures of the expansion history are differently sensitive to the angular diameter and luminosity distances and can therefore be used in conjunction to limit cosmic transparency. At the present day, the comparison only limits the change {delta}{tau} in the optical depth from redshift 0.20 to 0.35 at visible wavelengths to {delta}{tau} < 0.13 at 95% confidence. In a model with a constant comoving number density n of scatterers of constant proper cross section {sigma}, this limit implies n{sigma} < 2 x 10{sup -4} h Mpc{sup -1}. These limits depend weakly on the cosmological world model. Assuming a concordance world model, the best-fit value of {delta}{tau} to current data is negative at the 2{sigma} level. This could signal interesting new physics or could be the result of unidentified systematics in the BAF/SNeIa measurements. Within the next few years, the limits on transparency could extend to redshifts z {approx} 2.5 and improve to n{sigma} < 1.1 x 10{sup -5} h Mpc{sup -1}. Cosmic variance will eventually limit the sensitivity of any test using the BAF at the n{sigma} {approx} 4 x 10{sup -7} h Mpc{sup -1} level. Comparison with other measures of the transparency is provided; no other measure in the visible is as free of astrophysical assumptions.

79 ASTRONOMY AND ASTROPHYSICS↗

Operator constraints for twist-3 functions and Lorentz invariance properties of twist-3 observables

We investigate the behavior under Lorentz transformations of perturbative coefficient functions in a collinear twist-3 formalism relevant for high-energy observables including transverse polarization of hadrons. We argue that those perturbative coefficient functions can, a priori , acquire quite different yet Lorentz-invariant forms in various frames. This somewhat surprising difference can be traced back to a general dependence of the perturbative coefficient functions on light cone vectors which are introduced by the twist-3 factorization formulas and which are frame-dependent. One can remove this spurious frame dependence by invoking so-called Lorentz invariance relations (LIRs) between twist-3 parton correlation functions. Some of those relations for twist-3 distribution functions were discussed in the literature before. In this paper we derive the corresponding LIRs for twist-3 fragmentation functions. We explicitly demonstrate that these LIRs remove the light cone vector dependence by considering transverse spin observables in the single-inclusive production of hadrons in lepton-nucleon collisions, ℓN→hX. Furthermore, with the LIRs in hand, we also show that twist-3 observables in general can be written solely in terms of three-parton correlation functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Method to improve the repeatability of dynamic contact resistance measurement test results for high-voltage circuit breakers

Dynamic contact resistance measurement (DRM) is an effective technique to evaluate the contact condition in substations without dismantling circuit breakers. However, performing DRM tests with unsuitable test parameters will cause low repeatability of the test results, and even lead to the misdiagnosis of contact condition. Performing the DRM tests at high DC injected current can improve the repeatability. This paper studies the mechanism of the DC injected current on the repeatability of the DRM test results, and it also promotes a new determination method of the DC injected current amplitude. The impact of the DC injected current on DRM test results is reviewed. The mechanism of the DC injected current on DRM test results is investigated by analysing the chemical composition of the contact surface, the force exerted on the contacts, and the temperatures of a-spots on the contacts' surface. Results indicate that not the Lorentz force, but the temperature of a-spots is the primary influencing factor. The amplitude of the DC injected current can be determined by calculating the temperatures of the a-spot on the contacts' surface. And this method can also be used for other SF6 circuit breakers.

Cheng, Tingting↗

Thomas precession for spin and for a rod

In this paper we obtain the differential equations which describe the rotating rod and precession of the spin of a gyroscope moving along a curved trajectory. Several examples of such motion are considered. The obtained equations differ from the traditional Thomas expression, interpreted as a rotation of the noninertial frame relative to the fixed one. The cause of this disagreement is the fact that, in general, the axes of the moving frame are not orthogonal for the fixed observers. When the velocity changes, the axes’ direction changes, due to both Wigner rotation and Lorentz contraction. In the present paper we take into account both of these factors. It is shown that the vectors representing various physical quantities transform in different ways in the moving reference frame. Thus, the kinematic equations describing the motion of these quantities in a fixed frame are different as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A New Design of a Dressed Balloon Cavity with Superior Mechanical Properties

Superconducting spoke cavities are prone to multipactor - resonant raise of a number of electrons due to secondary emission. Recently proposed and tested by TRIUMF balloon-type spoke cavity showed an outstanding multipactor (MP) suppression property but unfortunately serious Q degradation at high fields. A new fully developed design of a dressed balloon cavity which can be used for any proton linac SSR2 section is developed. The design incorporates additional EP ports for high Q-factor demonstration. Superior properties are demonstrated, such as effective multipactor suppression, 40% lower Lorentz force coefficient, zero sensitivity to external pressure. This paper presents the results of coupled structural Multiphysics analysis, and engineering design of the dressed balloon cavity with EP ports.

43 PARTICLE ACCELERATORS↗

Decay properties of double heavy baryons

We study the semileptonic decays of double heavy baryons using a manifestly Lorentz covariant constituent three-quark model. We present complete results on transition form factors between double-heavy baryons for finite values of the heavy quark/baryon masses and in the heavy quark symmetry limit which is valid at and close to zero recoil. Decay rates are calculated and compared to each other in the full theory, keeping masses finite, and also in the heavy quark limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time dilation in relativistic two-particle interactions

We study the orbits of two interacting particles described by a fully relativistic classical mechanical Hamiltonian. We use two sets of initial conditions. In the first set (dynamics 1) the system's center of mass is at rest. In the second set (dynamics 2) the center of mass evolves with velocity V. If dynamics 1 is observed from a reference frame moving with velocity -V, the principle of relativity requires that all observables must be identical to those of dynamics 2 seen from the laboratory frame. Our numerical simulations demonstrate that kinematic Lorentz space-time transformations fail to transform particle observables between the two frames. This is explained as a result of the inevitable interaction dependence of the boost generator in the instant form of relativistic dynamics. Despite general inaccuracies of the Lorentz formulas, the orbital periods are correctly predicted by the Einstein's time dilation factor for all interaction strengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-momentum effective theory

Since the parton model was introduced by Feynman more than 50 years ago, much has been learned about the partonic structure of the proton through a large body of high-energy experimental data and dedicated global fits. However, limited progress has been made in calculating partonic observables such as the parton distribution function (PDFs) from the fundamental theory of strong interactions, quantum chromodynamics (QCD). Recently some advocated for a formalism, large-momentum effective theory (LaMET), through which one can extract parton physics from the properties of the proton traveling at a moderate boost factor such as γ ~ 2 – 5 . The key observation behind this approach is that Lorentz symmetry allows the standard formalism of partons in terms of light-front operators to be replaced by an equivalent one with large-momentum states and time-independent operators of a universality class. With LaMET, the PDFs, generalized PDFs or generalized parton distributions, transverse-momentum-dependent PDFs, and light-front wave functions can all be extracted in principle from lattice simulations of QCD (or other nonperturbative methods) through standard effective field theory matching and running. Future lattice QCD calculations with exascale computational facilities could help one to understand the experimental data related to the hadronic structure, including those from the upcoming electron-ion colliders dedicated to exploring the partonic landscape of the proton. In this work, the progress made in the past few years in the development of the LaMET formalism and its applications is reviewed, with an emphasis on a demonstration of its effectiveness from initial lattice QCD simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of electromagnetic, thermal and mechanical calculations with rf test results in rf-dipole deflecting/crabbing cavities

The current requirements of higher gradients and strict dimensional constraints in the emerging applications have required the designing of compact deflecting and crabbing rf structures. The superconducting rf-dipole cavity is one of the first novel compact designs with attractive properties such as higher gradients, higher shunt impedance and widely separated higher order modes. The recent tests performed on proof-of-principle designs of the rf-dipole geometry at 4.2 K and 2.0 K in the vertical test area at Jefferson Lab have proven the designs to achieve higher gradients with higher intrinsic quality factors and easily processed multipacting conditions. The cavity characteristics, such as pressure sensitivity and Lorentz force detuning, were studied using ANSYS before the fabrication. These characteristics were measured during the cavity test. The comparison between the simulation and the measurement provides insight how the simulation can be used for design and fabrication of future cavities.

43 PARTICLE ACCELERATORS↗

R evolution: Improving perturbative QCD

Perturbative QCD results in the MS scheme can be dramatically improved by switching to a scheme that accounts for the dominant power law dependence on the factorization scale in the operator product expansion. We introduce the ''MSR scheme'' which achieves this in a Lorentz and gauge invariant way and has a very simple relation to MS. Results in MSR depend on a cutoff parameter R, in addition to the {mu} of MS. R variations can be used to independently estimate (i.) the size of power corrections, and (ii.) higher-order perturbative corrections (much like {mu} in MS). We give two examples at three-loop order, the ratio of mass splittings in the B*-B and D*-D systems, and the Ellis-Jaffe sum rule as a function of momentum transfer Q in deep inelastic scattering. Comparing to data, the perturbative MSR results work well even for Q{approx}1 GeV, and power corrections are reduced compared to MS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spectroscopic properties of inhomogeneously broadened spin ensembles in a cavity

The enhanced collective coupling to weak quantum fields may turn atomic or spin ensembles into an important component in quantum information processing architectures. Inhomogeneous broadening can, however, significantly reduce the coupling and the lifetime of the collective excitation that represent the quantum information. In this paper we show that the width and shape of the inhomogeneous broadening have a striking influence on the dynamics of the cavity-ensemble system and may lead to narrowing of the linewidth of the collective states. We underpin our findings with the examples of a Gaussian and a Lorentzian profile of the inhomogeneity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast magnetization of a high-to-low-beta plasma beam

The magnetization of a high-beta (plasma energy density/magnetic-field energy density) hydrogen-plasma beam injected into a vacuum transverse magnetic field is studied experimentally. Nominal parameters were Ti = 1 eV, Te = 5 eV, n = 3 x 10 to the 13th/cu cm or less, v(i) = 7 x 10 to the 6th cm/sec or less, t(pulse) less than 70 microsec, and Bz = 300 G or less. Plasma characteristics were measured for a wide beam and a downstream distance, x = 300 rho(i) or less, where x is the downstream distance and rho(i) is the ion gyroradius. A brief initial state of diamagnetic propagation is observed, followed by magnetized propagation accompanied by beam compression transverse to B with as much as a factor of 4 increase in density and a slight drift of the beam in the ion Lorentz force direction.

Song, J. J.↗