Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lithology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

HCMM and LANDSAT imagery for geological mapping in northwest Queensland

The author has identified the following significant results. Photographic prints made from negatives of day-visible and day-IR cover of selected areas were compared with enhanced color composites generated from LANDSAT computer compatible tapes and films. For geological mapping purposes, HCMM imagery is of limited value. While large scale features like the Mikadoodi anticlinorium, contrasting lithological units, and major structures may be distinguished on day-visible and day-IR cover, the spectral bands are too broad and the resolution too coarse even for regional mapping purposes. The imagery appears to be most useful for drainage studies. Where drainage is seasonal, sequential imagery permits monitoring of broad scale water movement while the day-IR imagery yields valuable information on former channels. In plains areas subject to periodic change of stream courses, comparable IR cover at a larger scale would offer considerable potential for reconstruction of former drainage patterns essential for the correct interpretation of geochemical data relative to mineral exploration.

Cole, M. M.↗

Spatial thermal radiometry contribution to the Massif armoricain and the Massif central (France) litho-structural study

The author has identified the following significant results. Although the limited number of images received did not permit construction of a thermal inertia map, important geological details were obtained in the areas of lithology and tectonics. Interpretation of day, night, and seasonal imagery resulted in differentiating broad calcareous and dolomitic units in the Causse Plateau. In the Massif amoricain, some granite massifs were delineated which were not observed by LANDSAT. Neotectonic faults were also revealed.

Scanvic, J. Y.↗

Mineralogic and petrologic studies of lunar samples and meteorites

Experimental and thermodynamic research on the pressure temperature limits of the stability of the mineral assemblages found in pristine, spinel bearing lunar highland lithologies demonstrated the likelihood that the minerals originated in the lower stratigraphic levels of the primordial crust. The phase equilibrium in silicate solid/liquid systems of planetary importance were thermochemically interpreted in order to model the early formation of the crusts and maneles of Earth and Moon sized planets. The petrography and chemical composition of coarse grained gabbro, the chemical analysis and age dating of clasts from Apollo 16 breccia, the analysis of glass particles from Apollo 16 soil samples, the study of Allende and Mokoia meteorites as a source of information about events in the solar nebula, and the hydrothermal alteration of amorphous materials were also investigated. The capabilities of a model for addressing the problem of the origin of the Earth's moon by the disruptive capture mechanism are examined as well as models of the thermal evolution of hypothetical meteorite bodies. Progress in determining the composition of stony meteorite specimens collected at the Allan Hills site during the Antarctic field exploration is reported.

Wood, J. A.↗

An evaluation of Landsat 3 RBV imagery for an area of complex terrain in Southern Italy

Return Beam Videcon imagery from Landsat 3 was obtained in August, 1978 for part of Southern Italy in the regions of Basilicata and Apulia. The resolution of this imagery for medium contrast objects is approximately 40 meters and is shown to provide significant information concerning land cover and fluvial morphometry. Because of the wide spectral band width which is sensed (0.505-0.750 microns) by the RBV cameras, discrimination is only possible for spectrally distinct cover types, especially oak woodland. Fluvial morphometry can be readily described using the imagery. Because of the intense dissection of the area, the lowest order streams cannot be consistently mapped, but the rank order of the measured values of properties such as drainage density and link frequency for different lithologies corresponds closely to the actual ranking.

Townshend, J. R. G.↗

Breccias 73215 and 73255 - Siderophile and volatile trace elements

Fifteen siderophile and volatile trace elements (Os, Re, Ir, Pd, Ni, Au, Sb, Ge, Se, Ag, In, Zn, Cd, Bi, Tl) and U were determined by radiochemical neutron activation analysis in a spheroidal aphanitic clast and a clast of coarse-grained anorthositic gabbro from breccia 73215 and in three types of aphanite and two clasts of fine-grained anorthositic gabbro from breccia 73255. In common with most Apollo 17 fragment-laden melt rocks, the aphanites from 73215 and 73255 predominantly contain a Group 2 meteoritic component, which is apparently derived from the Serenitatis impact. All aphanitic lithologies contain the same meteoritic component, and are probably cogenetic. The clasts of fine-grained anorthositic gabbro contain substantial amounts (2% to 6% Cl equivalent based on Au) of a pre-Serenitatis Group 3 component. The clast of coarse-grained anorthositic gabbro is low in siderophile elements (0.4% Cl equivalent), and the meteoritic component (Group 5) is not well-defined. A strong correlation exists between Ir and Au in both the aphanites and the anorthositic gabbro clasts, which argues against the breccias 73215 and 73255 being open systems for Au

Morgan, J. W.↗

Stratigraphy and depositional history of the Apollo 17 drill core

Lithologic abundances obtained from modal analyses of a continuous string of polished thin sections indicate that the Apollo 17 deep drill core can be divided into three main zones: An upper zone (0-19 cm depth) characterized by high abundances of agglutinates (30%) and a high ratio of mare to non-mare lithic fragments (less than 0.8); a coarse-grained layer (24-56 cm) rich in fragments of high-Ti mare basalts and mineral fragments derived from them, and poor in agglutinates (6%); and a lower zone (56-285 cm) characterized by variable but generally high agglutinate abundances (25%) and a low ratio of mare to nonmare lithic fragments (0.6). Using observations of the geology of the landing site, the principles of cratering dynamics, and the vast amount of data collected on the core, the following depositional history for the section of regolith sampled by the Apollo 17 drill core: was devised.

Taylor, G. J.↗

Side-looking airborne radar image interpretation and geological mapping: Problems and results

Geological experiments and surveys conducted by BRGM and GDTA members to evaluate interest in SLAR image interpretation are summarized. Two surveys were selected for presentation: Les Vans (Massif central, France) and Guyana (South America). They have permitted a comparison between different types of SLAR: Goodyear, Motorola, JPL, and Vigie in term of lithological and structural applications. On the Les Vans test site conclusions reached concern radiometry, which is better on L-band imagery, polarization, HV being more useful than HH for geological mapping in an L-band system, wavelength and illuminations. Over Guyana, the use of Goodyear X-band SLAR enables satisfactory geological and structural mapping under heavy equatorial forest with cloud cover conditions. A differential program was developed for fracture filtering and image enhancement with a coherent light laser, and significant results were obtained.

Scanvic, J. Y.↗

Some aspects of geological information contained in LANDSAT images

The characteristics of MSS images and methods of interpretation are analyzed from a geological point of view. The supportive role of LANDSAT data are illustrated in several examples of surface expressions of geological features, such as synclines and anticlines, spectral characteristics of lithologic units, and circular impact structures.

Dejesusparada, N.↗

Remote sensing data applied to the evaluation of soil erosion caused by land-use. Ribeirao Anhumas Basin Area: A case study

Formerly covered by a tropical forest, the study area was deforested in the early 40's for coffee plantation and cattle raising, which caused intense gully erosion problems. To develop a method to analyze the relationship between land use and soil erosion, visual interpretations of aerial photographs (scale 1:25.000), MSS-LANDSAT imagery (scale 1:250,000), as well as automatic interpretation of computer compatible tapes by IMAGE-100 system were carried out. From visual interpretation the following data were obtained: land use and cover tapes, slope classes, ravine frequency, and a texture sketch map. During field work, soil samples were collected for texture and X-ray analysis. The texture sketch map indicate that the areas with higher slope angles have a higher susceptibilty to the development of gullies. Also, the over carriage of pastureland, together with very friable lithologies (mainly sandstone) occuring in that area, seem to be the main factors influencing the catastrophic extension of ravines in the study site.

Dejesusparada, N.↗

Geologic remote sensing

Remote-sensing techniques based on the analysis of spectral reflectance, spectral emittance, thermal inertia, and radar measurements are reviewed. Specific applications of Landsat multispectral scanner are examined with emphasis on mineral exploration. The potential of satellite systems for detailed lithologic mapping is pointed out.

Goetz, A. F. H.↗

Lead isotopic studies of the Samail ophiolite, Oman

The isotopic composition of Pb and the concentrations of U, Th, and Pb are determined for samples from massive sulfides and lithologic units of the Samail ophiolite. It is shown that the magma that formed the ophiolite was probably derived from a depleted mantle, similar in Pb isotopic composition to the source area of mid-ocean ridge basalt. The gross geochemical characteristics of the mantle sources have remained almost unchanged for the last 100 million years. It is also shown that the U-Th-Pb systematics of the Samail formation indicate that local vertical heterogeneity in the oceanic crust can result from crystal fractionation and metasomatism at, and near, an oceanic spreading center.

Chen, J. H.↗

Seasat orbital radar imagery for geologic mapping - Tennessee-Kentucky-Virginia

The purpose of the reported study is to analyze Seasat SAR imagery of a heavily vegetated mountainous land surface and to determine the potential of this microwave imaging system for geologic mapping. It is found that geologic mapping using orbital Seasat SAR imagery is feasible in the Appalachian Valley and Ridge province, where the radar system is highly sensitive to change of surface slope. Image tones and textures correlate with distinctive topography, from which generalized lithologic and structural interpretations are derived. Major and minor linear topographic features are easily mapped from the SAR images. The SAR sensor suppresses subdued geomorphic lineaments that strike parallel with or near to the radar look direction. This deficiency is partly compensated by the dual directions of radar illumination obtainable from the Seasat imaging system.

Ford, J. P.↗

Heat Capacity Mapping Mission (HCMM) program: Study of geological structure of Sicily and other Italian areas

The usefulness of thermal inertia mapping in discriminating geolithological units was investigated using Sardinia and the Gulf of Orosei as test sites. Software designed for LANDSAT data were modified and improved for HCMM tapes. A first attempt was made to compare the geological cross section, the topography, the IR radiance, and the thermal inertia along selected profiles of the test site. Thermal inertia profiles appear smoothed in comparison with the thermal radiance. The lowest apparent thermal inertia (ATI) was found on granitic and basaltic outcrops where their image is of sufficient extent, while ATI is higher on carbonatic and dolomitic or moist deposits. Almost every fault is marked by a jump of ATI, the interval being sometimes of the order of one pixel. This seems to demonstrate the ability of ATI to detect contacts or tectonically disturbed zones with a good resolution. It seems more difficult to measure the differences in ATI between homogeneous materials having different lithology. Ground surveys conducted and a simulation model of diurnal temperatures of rocks having different thermal inertia are discussed.

Cassinis, R.↗

Methodology of the interpretation of remote sensing data and applications in geology

Methods used for interpreting orbital (LANDSAT) data for regional geological mapping in Brazil are examined. Particular attention is given to the levels of analysis used for studying geomorphology, structural geology, lithology, stratigraphy, surface geology, and dynamic processes. Examples of regional mapping described include: (1) rock intrusions in SE Sao Paulo, the southern parts of Minas Gerais, and the states of Rio de Janeiro, and Espiritu Santo; (2) a preliminary survey of Pre-Cambrian geology in the State of Piaui; and (3) the Gondwana Project - surveying Jaguaribe plants. Mineral exploration in Rio Grande do Sul, and the geology of the Alcalino complex of Itatiaia are discussed as well as the use of automatic classifications of rock intrusions and of ilmenite deposits in the Floresta Region. Aerial photography, side looking radar, and thermal infrared scanning are other types of remote sensors also used in prospecting for geothermal anomalies in the city of Caldas Novas-Goias.

Dejesusparada, N.↗

Application of remote sensing to the photogeologic mapping of the region of the Itatiaia alkaline complex

Remote sensing methods applied to geologically complex areas, through interaction of ground truth and information obtained from multispectral LANDSAT images and radar mosaics were evaluated. The test area covers parts of Minos Gerais, Rio De Janeiro and Sao Paulo states and contains the alkaline complex of Itatiaia and surrounding Precambrian terrains. Geological and structural mapping was satisfactory; however, lithological varieties which form the massif's could not be identified. Photogeological lineaments were mapped, some of which represent the boundaries of stratigraphic units. Automatic processing was used to classify sedimentary areas, which includes the talus deposits of the alkaline massifs.

Dejesusparada, N.↗

Study of gravity and magnetic anomalies using MAGSAT data

The results of modeling satellite-elevation magnetic and gravity data using the constraints imposed by near surface data and seismic evidence shows that the magnetic minimum can be accounted for by either an intracrustal lithologic variation or by an upwarp of the Curie point isotherm. The long wavelength anomalies of the NOO's-vector magnetic survey of the conterminous U.S. were contoured and processed by various frequency filters to enhance particular characteristics. A preliminary inversion of the data was completed and the anomaly field calculated at 450 km from the equivalent magnet sources to compare with the POGO satellite data. Considerable progress was made in studing the satellite magnetic data of South America and adjacent marine areas. Preliminary versions of the 1 deg free-air gravity anomaly map (20 m gal contour interval) and the high cut (lambda approximately 8 deg) filtered anomaly maps are included.

Braile, L. W.↗

Infrared airborne spectroradiometer survey results in the western Nevada area

The Mark II airborne spectroradiometer system was flown over several geologic test sites in western Nevada. The infrared mineral absorption bands were observed and recorded for the first time using an airborne system with high spectral resolution in the 2.0 to 2.5 micron region. The data show that the hydrothermal alteration zone minerals, carbonates, and other minerals are clearly visible in the airborne survey mode. The finer spectral features that distinguish the various minerals with infrared bands are also clearly visible in the airborne survey data. Using specialized computer pattern recognition methods, it is possible to identify mineralogy and map alteration zones and lithologies by airborne spectroradiometer survey techniques.

Collins, W.↗