Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser communication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Multi-Beam Laser Beacon Propagation Over Lunar Distance: Comparison of Predictions and Measurements

A multi-beam beacon was transmitted from the Optical Communication Telescope Laboratory (OCTL) located at Table Mountain, CA to the Lunar Laser Space Terminal (LLST), on-board the Lunar Atmospheric Dust and Environment Explorer (LADEE) spacecraft, during NASA’s recent Lunar Laser Communication Demonstration (LLCD). The laser beacon (1568?0.1 nm) was square wave modulated and sensed by a LLST quadrant sensor to enable link acquisition and tracking. LLST computed the mean received beacon power and returned 5 kHz sampled power time series over the downlink. Post-processing of the decoded downlink received at OCTL retrieved the uplink power recorded at LLST. The predicted mean irradiance delivered to LLST consistently agreed with the variable beam divergence transmitted from OCTL to within < 1 decibel (dB). Irradiance fluctuations detected at LLST were reconciled with an uplink wave-propagation model derived using independently monitored atmospheric parameters. We report good agreement of the scintillation index and atmospheric coherence time.

Biswas, A↗
NASA NTRS2012

Laser-Ranging Transponders for Science Investigations of the Moon and Mars

An active laser was developed ranging in real-time with two terminals, emulating interplanetary distances, and with submillimeter accuracy. In order to overcome the limitations to ranging accuracy from jitters and delay drifts within the transponders, architecture was proposed based on asynchronous paired one-way ranging with local references. A portion of the transmitted light is directed, via a reference path, to the local detector. This allows for compensation of any jitter in the timing of the emitted laser pulse. The same detector is used to measure the time of the received pulses emitted from the remote terminal. This approach removes any change in the delay caused by the detector or its electronics. Two separate terminals using commercial off-the-shelf hardware were built to emulate active laser ranging over interplanetary distances. The communication link for the command to start recording pulse arrival times and data transfer from one terminal to the other was achieved using a standard wireless link, emulating free space laser communication. The deviation is well below the goal of 1-mm precision. This leaves enough margin to achieve 1-mm precision when including the fluctuations due to atmospheric turbulence while ranging to Mars through the Earth s atmosphere. The two terminals are mounted on translation stages, which can be moved freely on rails to yield a wide range of distances with fine adjustment. The two terminals were separated by approximately 16 meters.

Hemmati, Hamid↗
NASA NTRS2008

Optical Communications from Planetary Distances

Future planetary campaigns, including human missions, will require data rates difficult to realize by microwave links. Optical channels not only provide an abundance of bandwidth, they also allow for significant size, weight, and power reduction. Moreover, optical-based tracking may enhance spacecraft navigation with respect to microwave-based tracking. With all its advantages, optical communications from deep space is not without its challenges. Due to the extreme distance between the two ends of the link, specialized technologies are needed to enable communications in the deep space environment. Although some of the relevant technologies have been developed in the last decade, they remain to be validated in an appropriate domain. The required assets include efficient pulsed laser sources, modulators, transmitters, receivers, detectors, channel encoders, precise beam pointing technologies for the flight transceiver and large apertures for the ground receiver. Clearly, space qualification is required for the systems that are installed on a deep space probe. Another challenge is atmospheric effects on the optical beam. Typical candidate locations on the ground have a cloud-free line of sight only on the order of 60-70% of the time. Furthermore, atmospheric losses and background light can be problematic even during cloud-free periods. Lastly, operational methodologies are needed for efficient and cost effective management of optical links. For more than a decade, the National Aeronautics and Space Administration (NASA) has invested in relevant technologies and procedures to enable deep space optical communications capable of providing robust links with rates in the order of 1 Gb/s from Mars distance. A recent publication indicates that potential exists for 30-dB improvement in performance through technology development with respect to the state-of-the-art in the early years of this decade. The goal is to fulfill the deep space community needs from about 2020 to the foreseeable future. It is envisioned that, at least initially, optical links will be complemented by microwave assets for added robustness, especially for human missions. However, it is expected that as optical techniques mature, laser communications may be operated without conventional radio frequency links. The purpose of this paper is to briefly review the state-of-the-art in deep space laser communications and its challenges and discuss NASA-supported technology development efforts and plans for deep space optical communications at JPL.

Laser Communications↗
NASA NTRS1989

Monolithic Arrays of Grating-Surface-Emitting Diode Lasers and Quantum Well Modulators for Optical Communications

The electro-optic switching properties of injection-coupled coherent 2-D grating-surface-emitting laser arrays with multiple gain sections and quantum well active layers are discussed and demonstrated. Within such an array of injection-coupled grating-surface-emitting lasers, a single gain section can be operated as intra-cavity saturable loss element that can modulate the output of the entire array. Experimental results demonstrate efficient sub-nanosecond switching of high power grading-surface-emitting laser arrays by using only one gain section as an intra-cavity loss modulator.

Carlson, N. W.↗
NASA NTRS1993

Adaptive laser link reconfiguration using constraint propagation

This paper describes Harris AI research performed on the Adaptive Link Reconfiguration (ALR) study for Rome Lab, and focuses on the application of constraint propagation to the problem of link reconfiguration for the proposed space based Strategic Defense System (SDS) Brilliant Pebbles (BP) communications system. According to the concept of operations at the time of the study, laser communications will exist between BP's and to ground entry points. Long-term links typical of RF transmission will not exist. This study addressed an initial implementation of BP's based on the Global Protection Against Limited Strikes (GPALS) SDI mission. The number of satellites and rings studied was representative of this problem. An orbital dynamics program was used to generate line-of-site data for the modeled architecture. This was input into a discrete event simulation implemented in the Harris developed COnstraint Propagation Expert System (COPES) Shell, developed initially on the Rome Lab BM/C3 study. Using a model of the network and several heuristics, the COPES shell was used to develop the Heuristic Adaptive Link Ordering (HALO) Algorithm to rank and order potential laser links according to probability of communication. A reduced set of links based on this ranking would then be used by a routing algorithm to select the next hop. This paper includes an overview of Constraint Propagation as an Artificial Intelligence technique and its embodiment in the COPES shell. It describes the design and implementation of both the simulation of the GPALS BP network and the HALO algorithm in COPES. This is described using a 59 Data Flow Diagram, State Transition Diagrams, and Structured English PDL. It describes a laser communications model and the heuristics involved in rank-ordering the potential communication links. The generation of simulation data is described along with its interface via COPES to the Harris developed View Net graphical tool for visual analysis of communications networks. Conclusions are presented, including a graphical analysis of results depicting the ordered set of links versus the set of all possible links based on the computed Bit Error Rate (BER). Finally, future research is discussed which includes enhancements to the HALO algorithm, network simulation, and the addition of an intelligent routing algorithm for BP.

Crone, M. S.↗
NASA NTRS1991

Improving the Reliability and Modal Stability of High Power 870 nm AlGaAs CSP Laser Diodes for Applications to Free Space Communication Systems

The operating characteristics (power-current, beam divergence, etc.) and reliability assessment of high-power CSP lasers is discussed. The emission wavelength of these lasers was optimized at 860 to 880 nm. The operational characteristics of a new laser, the inverse channel substrate planar (ICSP) laser, grown by metalorganic chemical vapor deposition (MOCVD), is discussed and the reliability assessment of this laser is reported. The highlights of this study include a reduction in the threshold current value for the laser to 15 mA and a degradation rate of less than 2 kW/hr for the lasers operating at 60 mW of peak output power.

Connolly, J. C.↗
NASA NTRS2003

Transmitters and receivers in free space optical communications for Deep Space links

Two of the many research areas integral making a Mars-Earth optical communication link a reality are optical antenna design and laser transmitter design. This paper addresses areas of both of these by exploring a mode-matched design for a cavity-dumped communications laser, and by reporting on the initial stages of the analysis of an existing 100 inch telescope for use as an optical communications receiver.

deep space optical communication↗
NASA NTRS1991

Enhanced line emission from laser-produced plasmas

This communication reports the first systematic study on background gas-induced spectral-line-emission enhancement from laser-produced plasmas. Line emission from aluminum plasmas was enhanced by factors of up to 35 by the introduction of He, Ne, Xe, or N2. The enhancement has been attributed to three-body recombination.

Timmer, C.↗
NASA NTRS2004

Semiconductor lasers beyond the fiber optics telecommunication wavelength

Semiconductor lasers emitting at 1.55 microns are the cornerstone of the high bandwidth optical communications industry. Semiconductor lasers operating at this and other wavelengths are also used in the engineering, biology, chemistry and medical fields. The light emission in most semiconductor lasers is due to the optical transition between the valence and conduction bands of the semiconductor active material. This means that the intrinsic properties of the semiconductor active material i.e., the bandgap energy dictates the emission wavelength. This limits the efficient operation of these lasers at wavelengths above 3 microns. In the mid 1990s this limitation was overcome with the emergence of new laser architectures, such as the intersubband and interband Quantum Cascade (QC) lasers

Forouhar, Siamak↗
NASA NTRS1972

Computer-aided CO2 laser cavity-length selection for reduced line competition

The advantages of carbon dioxide lasers for space communications systems are considered. An attempt was made to predict the signature of CO2 lasers. It was found that this requires accurate data on the laser wavelengths (accuracy on the order of 10 MHz). The results of absolute frequency measurements of CO2 lines were utilized, and a list of accurate frequencies was calculated. A computer program was written for the signature prediction. A second program was written which searches through large ranges of cavity length and prints lists of regions where a particular line is well separated from adjacent lines in the signature. Lasers designed according to this list will have an undisturbed tuning profile for one or more lines.

Schiffner, G.↗
NASA NTRS2017

Deep-Space Navigation Using Optical Communications Systems

Optical communication links using lasers can potentially deliver data rates much higher than those possible using radio frequencies. If optical communications equipment is going to be carried by future deep-space missions, this equipment, with some adaptations, could also be used to perform tracking for trajectory determination. A number of experiments have been performed in Earth orbit and in lunar orbit using optical data links, while other missions have demonstrated optical links over interplanetary distances. Laser ranging using corner cube retroreflectors is a well-established technique that has been used for orbit determination of Earth orbiting spacecraft, for geodesy, and for lunar research, achieving centimeter-level precisions, but it is not a practical method for deep-space distances. There are two main optical tracking types that are being considered for deep-space navigation. The first is optical astrometry of spacecraft: a telescope on the ground images the laser beam coming from a spacecraft against the star background, determining its plane-of-sky position as seen from the observatory. This type will greatly benefit from the release of the high-accuracy star catalog produced by ESA’s Gaia mission, allowing for the generation of plane-of-sky measurements with an accuracy similar to that obtained today using VLBI tracking techniques. The second is optical ranging using active optical systems at both ends of the link, requiring a more careful design of the spacecraft optical communications system. One of the advantages of using optical frequencies is that they are not affected by charged particles in the signal path the way that radio frequencies are, eliminating solar plasma and ionospheric effects from the light-time calculation and the corresponding noise. On the other hand, clouds would preclude any type of optical communication, and daytime light scattering precludes astrometric measurements. This paper presents our analysis so far of the performance that could be achieved using optical data types in a number of deep-space scenarios. One of the questions that we are trying to answer is whether spacecraft equipped with optical communications terminals would also need to carry radio-frequency equipment for navigational purposes. We also want to understand how accurately we will be able to navigate spacecraft in different mission types and phases, and what would be the constraints, advantages, and disadvantages of using optical communications systems for deep-space navigation.

Karimi, Reza↗
NASA NTRS2017

Space-Based Optical Communications with CubeSats

Optical communication systems use lasers to encode and transmit data with higher speed and density than traditional radio frequency (RF)-based communications. Smaller antennas, lower power requirements, and increased spectrum availability enable optical communications to be integrated into CubeSats more easily than radios, enabling afford-able communications solutions for future NASA missions.

Ebert, Monica L.↗
NASA NTRS1993

Results from the Galileo Laser Uplink: A JPL Demonstration of Deep-Space Optical Communications

The successful completion of the Galileo Optical Experiment (GOPEX), represented the accomplishment of a significant milestone in JPL's optical communication plan. The experiment demonstrated the first transmission of a narrow laser beam to a deep-space vehicle. Laser pulses were beamed to the Galileo spacecraft by Earth-based transmitters at the Table Mountain Facility (TMF), California, and Starfire Optical Range (SOR), New Mexico. The experiment took place over an eight-day period (December 9 through December 16, 1992) as Galileo receded from Earth on its way to Jupiter, and covered ranges from 1 to 6 million kilometers (15 times the Earth-Moon distance), the laser uplink from TMF covered the longest known range for laser beam transmission and detection. This demonstration is the latest in a series of accomplishments by JPL in the development of deep-space optical communications technology.

Lasers experiment optical communications Galileo d↗
NASA NTRS1983

Semiconductor optoelectronic devices for free-space optical communications

The properties of individual injection lasers are reviewed, and devices of greater complexity are described. These either include or are relevant to monolithic integration configurations of the lasers with their electronic driving circuitry, power combining methods of semiconductor lasers, and electronic methods of steering the radiation patterns of semiconductor lasers and laser arrays. The potential of AlGaAs laser technology for free-space optical communications systems is demonstrated. These solid-state components, which can generate and modulate light, combine the power of a number of sources and perform at least part of the beam pointing functions. Methods are proposed for overcoming the main drawback of semiconductor lasers, that is, their inability to emit the needed amount of optical power in a single-mode operation.

Katz, J.↗