Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large Eddy simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Entrainment, Drizzle, and Stratocumulus Cloud Albedo

Globally averaged cloud changes from GCMs on average show a doubling of the Twomey effect, which is the change in cloud albedo with respect to changes in droplet concentrations for fixed cloud water and droplet dispersion. In contrast, ship-track measurements show a much more modest amplification of the Twomey effect, suggesting that the GCMs are exaggerating the indirect aerosol effect. We have run large-eddy simulations with bin microphysics of marine stratocumulus from multiple field campaigns, and find that the large-eddy simulations are in much better agreement with the ship-track measurements. The inversion strength over N. Pacific stratocumulus (as measured during DYCOMS-II) is generally much stronger than over N. Atlantic stratocumulus (as measured during ASTEX), and we have found that the response of cloud water to increasing droplet concentration changes sign as the inversion strengthens. For the different environmental conditions, we will show the overall response of cloud albedo to droplet concentrations, and decompose the response into its contributing factors of changes in cloud water, droplet dispersion, and horizontal inhomogeneity.

Ackerman, A. S.↗
NASA NTRS2014

Turbulence Modeling Verification and Validation

Computational fluid dynamics (CFD) software that solves the Reynolds-averaged Navier-Stokes (RANS) equations has been in routine use for more than a quarter of a century. It is currently employed not only for basic research in fluid dynamics, but also for the analysis and design processes in many industries worldwide, including aerospace, automotive, power generation, chemical manufacturing, polymer processing, and petroleum exploration. A key feature of RANS CFD is the turbulence model. Because the RANS equations are unclosed, a model is necessary to describe the effects of the turbulence on the mean flow, through the Reynolds stress terms. The turbulence model is one of the largest sources of uncertainty in RANS CFD, and most models are known to be flawed in one way or another. Alternative methods such as direct numerical simulations (DNS) and large eddy simulations (LES) rely less on modeling and hence include more physics than RANS. In DNS all turbulent scales are resolved, and in LES the large scales are resolved and the effects of the smallest turbulence scales are modeled. However, both DNS and LES are too expensive for most routine industrial usage on today's computers. Hybrid RANS-LES, which blends RANS near walls with LES away from walls, helps to moderate the cost while still retaining some of the scale-resolving capability of LES, but for some applications it can still be too expensive. Even considering its associated uncertainties, RANS turbulence modeling has proved to be very useful for a wide variety of applications. For example, in the aerospace field, many RANS models are considered to be reliable for computing attached flows. However, existing turbulence models are known to be inaccurate for many flows involving separation. Research has been ongoing for decades in an attempt to improve turbulence models for separated and other nonequilibrium flows. When developing or improving turbulence models, both verification and validation are important steps in the process. Verification insures that the CFD code is solving the equations as intended (no errors in the implementation). This is typically done either through the method of manufactured solutions (MMS) or through careful step-by-step comparisons with other verified codes. After the verification step is concluded, validation is performed to document the ability of the turbulence model to represent different types of flow physics. Validation can involve a large number of test case comparisons with experiments, theory, or DNS. Organized workshops have proved to be valuable resources for the turbulence modeling community in its pursuit of turbulence modeling verification and validation. Workshop contributors using different CFD codes run the same cases, often according to strict guidelines, and compare results. Through these comparisons, it is often possible to (1) identify codes that have likely implementation errors, and (2) gain insight into the capabilities and shortcomings of different turbulence models to predict the flow physics associated with particular types of flows. These are valuable lessons because they help bring consistency to CFD codes by encouraging the correction of faulty programming and facilitating the adoption of better models. They also sometimes point to specific areas needed for improvement in the models. In this paper, several recent workshops are summarized primarily from the point of view of turbulence modeling verification and validation. Furthermore, the NASA Langley Turbulence Modeling Resource website is described. The purpose of this site is to provide a central location where RANS turbulence models are documented, and test cases, grids, and data are provided. The goal of this paper is to provide an abbreviated survey of turbulence modeling verification and validation efforts, summarize some of the outcomes, and give some ideas for future endeavors in this area.

Rumsey, Christopher L.↗
NASA NTRS2022

Cloud Adjustments From Large-Scale Smoke–Circulation Interactions Strongly Modulate the Southeastern Atlantic Stratocumulus-to-Cumulus Transition

Smoke from southern Africa blankets the southeastern Atlantic Ocean from June to October, producing strong and competing aerosol radiative effects. Smoke effects on the transition between overcast stratocumulus and scattered cumulus clouds are investigated along a Lagrangian (air-mass-following) trajectory in regional climate and large eddy simulation models. Results are compared with observations from three recent field campaigns that took place in August 2017: ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES), CLouds and Aerosol Radiative Impacts and Forcing: Year 2017 (CLARIFY), and Layered Atlantic Smoke Interactions with Clouds (LASIC). The case study is set up around the joint ORACLES–CLARIFY flight that took place near Ascension Island on 18 August 2017. Smoke sampled upstream on an ORACLES flight on 15 August 2017 likely entrained into the marine boundary layer later sampled during the joint flight. The case is first simulated with the WRF-CAM5 regional climate model in three distinct setups: (1) FireOn, in which smoke emissions and any resulting smoke–cloud–radiation interactions are included; (2) FireOff, in which no smoke emissions are included; (3) RadOff, in which smoke emissions and their microphysical effects are included but aerosol does not interact directly with radiation. Over the course of the Lagrangian trajectory, differences in free tropospheric thermodynamic properties between FireOn and FireOff are nearly identical to those between FireOn and RadOff, showing that aerosol–radiation interactions are primarily responsible for the free tropospheric effects. These effects are non-intuitive: in addition to the expected heating within the core of the smoke plume, there is also a “banding” effect of cooler temperature (∼1–2 K) and greatly enhanced moisture (>2 g kg−1) at the plume top. This banding effect is caused by a vertical displacement of the former continental boundary layer in the free troposphere in the FireOn simulation resulting from anomalous diabatic heating due to smoke absorption of sunlight that manifests primarily as a few hundred meters per day reduction in large-scale subsidence over the ocean. A large eddy simulation (LES) is then forced with free tropospheric fields taken from the outputs for the WRF-CAM5 FireOn and FireOff runs. Cases are run by selectively perturbing one variable (e.g., aerosol number concentration, temperature, moisture, vertical velocity) at a time to better understand the contributions from different indirect (microphysical), “large-scale” semi-direct (above-cloud thermodynamic and subsidence changes), and “local” semi-direct (below-cloud smoke absorption) effects. Despite a more than 5-fold increase in cloud droplet number concentration when including smoke aerosol concentrations, minimal differences in cloud fraction evolution are simulated by the LES when comparing the base case with a perturbed aerosol case with identical thermodynamic and dynamic forcings. A factor of 2 decrease in background free tropospheric aerosol concentrations from the FireOff simulation shifts the cloud evolution from a classical entrainment-driven “deepening–warming” transition to trade cumulus to a precipitation-driven “drizzle-depletion” transition to open cells, however. The thermodynamic and dynamic changes caused by the WRF-simulated large-scale adjustments to smoke diabatic heating strongly influence cloud evolution in terms of both the rate of deepening (especially for changes in the inversion temperature jump and in subsidence) and in cloud fraction on the final day of the simulation (especially for the moisture “banding” effect). Such large-scale semi-direct effects would not have been possible to simulate using a small-domain LES model alone.

southeast Atlantic Ocean↗
DOE OSTI2021

Evaluating Terrain as a Turbulence Generation Method

When driving microscale large-eddy simulations with mesoscale model solutions, turbulence will take space to develop, known as fetch, on the microscale domain. To reduce fetch, it is common to add perturbations near the boundaries to speed up turbulence development. However, when simulating domains over complex terrain, it is possible that the terrain itself can quickly generate turbulence within the boundary layer. It is shown here that rugged terrain is able to generate turbulence without the assistance of a perturbation strategy; however, the levels of turbulence generated are improved when adding perturbations at the inlet. Flow over smoothed, but not flat, terrain fails to generate adequate turbulence throughout the boundary layer in all tests conducted herein. Sensitivities to the strength of the mean wind speed and boundary layer height are investigated and show that higher wind speeds produce turbulence over terrain features that slower wind speeds do not. Further, by increasing the height of the capping inversion, the effectiveness of topography alone to generate turbulence throughout the depth of the boundary is diminished. In all cases, the inclusion of a perturbation strategy improved simulation performance with respect to turbulence development.

17 WIND ENERGY↗
NASA NTRS1993

Dynamic subgrid-scale modeling for high-speed transitional boundary layers

The subgrid scales are modeled dynamically in a large-eddy simulation of transitional boundary-layer flow along a hollow cylinder at a Mach number of 4.5. The behavior of the dynamic-model coefficients, which is determined from local information in the resolved field, is investigated through both an a priori test with direct numerical simulation data for the same case and a complete large-eddy simulation. Both contractions proposed by Germano et al. (1991) and Lilly (1992) are used for the unique determination of the coefficients of the dynamic model, and their results are compared and assessed. The behavior, as well as the energy cascade of the subgridscale field structure, is investigated at various stages of the transition process.

El-Hady, Nabil M.↗
NASA NTRS1979

Evaluation of subgrid-scale models using an accurately simulated turbulent flow

A calculation of periodic homogeneous isotropic turbulence is used to simulate the experimental decay of grid turbulence. The calculation is found to match the experiment in a number of important aspects and the computed flow field is then treated as a realization of a physical turbulent flow. From this flow, a calculation is conducted of the large eddy field and the various averages of the subgrid-scale turbulence that occur in the large eddy simulation equations. These quantities are compared with the predictions of the models that are usually applied in large eddy simulation. The results show that the terms which involve the large-scale field are accurately modeled but the subgrid-scale Reynolds stresses are only moderately well modeled. It is also possible to use the method to predict the constants of the models without reference to experiment. Attempts to find improved models have not met with success.

Clark, R. A.↗
NASA NTRS1996

A New Class of Finite Difference Schemes

Fluid flows in the transitional and turbulent regimes possess a wide range of length and time scales. The numerical computation of these flows therefore requires numerical methods that can accurately represent the entire, or at least a significant portion, of this range of scales. The inaccurate representation of small scales is inherent to non-spectral schemes. This can be detrimental to computations where the energy in the small scales is comparable to that in the larger scales, e.g. large-eddy simulations of high Reynolds number turbulence. The inaccurate numerical representation of the small scales in these large-eddy simulations can result in the numerical error overwhelming the contribution of the subgrid-scale model.

Mahesh, K.↗
NASA NTRS2001

Effects of Aircraft Wake Dynamics on Measured and Simulated NO(x) and HO(x) Wake Chemistry

High-resolution numerical large-eddy simulations of the near wake of a B757 including simplified NOx and HOx chemistry were performed to explore the effects of dynamics on chemistry in wakes of ages from a few seconds to several minutes. Dilution plays an important basic role in the NOx-O3 chemistry in the wake, while a more interesting interaction between the chemistry and dynamics occurs for the HOx species. These simulation results are compared with published measurements of OH and HO2 within a B757 wake under cruise conditions in the upper troposphere taken during the Subsonic Aircraft Contrail and Cloud Effects Special Study (SUCCESS) mission in May 1996. The simulation provides a much finer grained representation of the chemistry and dynamics of the early wake than is possible from the 1 s data samples taken in situ. The comparison suggests that the previously reported discrepancy of up to a factor of 20 - 50 between the SUCCESS measurements of the [HO2]/[OH] ratio and that predicted by simplified theoretical computations is due to the combined effects of large mixing rates around the wake plume edges and averaging over volumes containing large species fluctuations. The results demonstrate the feasibility of using three-dimensional unsteady large-eddy simulations with coupled chemistry to study such phenomena.

Lewellen, D. C.↗
NASA NTRSDate not supplied

WMLES for the Fifth High-Lift PredictionWorkshop Cases Using FUN3D

This paper presents solution assessments and grid convergence studies for the test cases outlined in the Fifth High-Lift Prediction Workshop (HLPW-5), focusing on the high-lift Common Research Models (CRM-HL). The study utilizes a wall-modeled large-eddy simulation (WMLES) methodology developed in the unstructured-grid, node-centered flow solver FUN3D. The second-order accurate simulations conducted in this study utilize a finite-volume spatial discretization and an implicit temporal scheme. Large-scale turbulent features are resolved away from the wall, with small-scale effects captured by the Vreman subgrid-scale model. An equilibrium wall function uses the first grid point off the wall serving as the critical interface between the wall model and the large-eddy simulation region, thus requiring careful placement in grid design. WMLES solutions are assessed for HLPW-5 cases, including a clean wing-body configuration and geometry-buildup configurations corresponding to the 5.1\% ONERA CRM-HL model. Grid-convergence studies are systematically conducted using uniformly refined grids. Moreover, simulation results and grid sensitivity are presented for the NASA 5.2\% CRM-HL configuration at both moderate and flight-scale Reynolds numbers. Overall, WMLES results are satisfactory and agree well with available experimental data, especially on sufficiently fine grids.

high-lift aerodynamics↗
NASA NTRS1992

LES versus DNS: A comparative study

We have performed Direct Numerical Simulations (DNS) and Large Eddy Simulations (LES) of forced isotropic turbulence at moderate Reynolds numbers. The subgrid scale model used in the LES is based on an eddy viscosity which adjusts instantaneously the energy spectrum of the LES to that of the DNS. The statistics of the large scales of the DNS (filtered DNS field or fDNS) are compared to that of the LES. We present results for the transfer spectra, the skewness and flatness factors of the velocity components, the PDF's of the angle between the vorticity and the eigenvectors of the rate of strain, and that between the vorticity and the vorticity stretching tensor. The above LES statistics are found to be in good agreement with those measured in the fDNS field. We further observe that in all the numerical measurements, the trend was for the LES field to be more gaussian than the fDNS field. Future research on this point is planned.

Shtilman, L.↗
DOE OSTI2021

Simulated Dust Transport in the Convective Boundary Layer

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth's radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud–relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large–eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large–eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART–WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi–single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. Furthermore, these results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2015

Effects of Unsteady Flow Interactions on the Performance of a Highly-Loaded Transonic Compressor Stage

The primary focus of this paper is to investigate the loss sources in an advanced GE transonic compressor design with high reaction and high stage loading. This advanced compressor has been investigated both experimentally and analytically in the past. The measured compressor efficiency is significantly lower than the efficiency calculated with various existing tools based on RANS and URANS. The general understanding is that some important flow physics in this modern compressor design are not represented in the current tools. To pinpoint the source of the efficiency miss, an advanced test with detailed flow traverse was performed for the front one and a half stage at the NASA Glenn Research Center. In the present paper, a Large Eddy Simulation (LES) is employed to determine whether a higher-fidelity simulation can pick up any additional flow physics that can explain past efficiency miss with RANS and URANS. The results from the Large Eddy Simulation were compared with the NASA test results and the GE interpretation of the test data. LES calculates lower total pressure and higher total temperature on the pressure side of the stator, resulting in large loss generation on the pressure side of the stator. On the other hand, existing tools based on the RANS and URANS do not calculate this high total temperature and low total pressure on the pressure side of the stator. The calculated loss through the stator from LES seems to match the measured data and the GE data interpretation. Detailed examination of the unsteady flow field from LES indicates that the accumulation of high loss near the pressure side of the stator is due to the interaction of the rotor wake with the stator blade. The strong rotor wake interacts quite differently with the pressure side of the stator than with the suction side of the stator blade. The concave curvature on the pressure side of the stator blade increases the mixing of the rotor wake with the pressure side boundary layer significantly. On the other hand, the convex curvature on the suction side of the stator blade decreases the mixing and the suction side blade boundary layer remains thin. The jet velocity in the rotor wake in the stator frame seems to magnify the curvature effect in addition to inviscid redistribution of wake fluid toward the pressure side of the blade.

LES↗
NASA NTRS2015

RACORO Continental Boundary Layer Cloud Investigations: 1. Case Study Development and Ensemble Large-Scale Forcings

Observation-based modeling case studies of continental boundary layer clouds have been developed to study cloudy boundary layers, aerosol influences upon them, and their representation in cloud- and global-scale models. Three 60 h case study periods span the temporal evolution of cumulus, stratiform, and drizzling boundary layer cloud systems, representing mixed and transitional states rather than idealized or canonical cases. Based on in situ measurements from the Routine AAF (Atmospheric Radiation Measurement (ARM) Aerial Facility) CLOWD (Clouds with Low Optical Water Depth) Optical Radiative Observations (RACORO) field campaign and remote sensing observations, the cases are designed with a modular configuration to simplify use in large-eddy simulations (LES) and single-column models. Aircraft measurements of aerosol number size distribution are fit to lognormal functions for concise representation in models. Values of the aerosol hygroscopicity parameter, kappa, are derived from observations to be approximately 0.10, which are lower than the 0.3 typical over continents and suggestive of a large aerosol organic fraction. Ensemble large-scale forcing data sets are derived from the ARM variational analysis, European Centre for Medium-Range Weather Forecasts, and a multiscale data assimilation system. The forcings are assessed through comparison of measured bulk atmospheric and cloud properties to those computed in "trial" large-eddy simulations, where more efficient run times are enabled through modest reductions in grid resolution and domain size compared to the full-sized LES grid. Simulations capture many of the general features observed, but the state-of-the-art forcings were limited at representing details of cloud onset, and tight gradients and high-resolution transients of importance. Methods for improving the initial conditions and forcings are discussed. The cases developed are available to the general modeling community for studying continental boundary clouds.

Boundary layers↗
NASA NTRS2011

Density Weighted FDF Equations for Simulations of Turbulent Reacting Flows

In this report, we briefly revisit the formulation of density weighted filtered density function (DW-FDF) for large eddy simulation (LES) of turbulent reacting flows, which was proposed by Jaberi et al. (Jaberi, F.A., Colucci, P.J., James, S., Givi, P. and Pope, S.B., Filtered mass density function for Large-eddy simulation of turbulent reacting flows, J. Fluid Mech., vol. 401, pp. 85-121, 1999). At first, we proceed the traditional derivation of the DW-FDF equations by using the fine grained probability density function (FG-PDF), then we explore another way of constructing the DW-FDF equations by starting directly from the compressible Navier-Stokes equations. We observe that the terms which are unclosed in the traditional DW-FDF equations are now closed in the newly constructed DW-FDF equations. This significant difference and its practical impact on the computational simulations may deserve further studies.

Shih, Tsan-Hsing↗
DOE OSTI2024

Project Title: Adaptive Vertical Grid Enhancement for E3SM (Final Technical Report)

During the first phase of the project (2018/05-2021/05), we proved the hypothesis that, without tuning, high vertical resolution improves the representation of unresolved, parameterized low altitude clouds such as stratocumulus clouds in global climate models. We evaluated the effectiveness of the newly developed computational framework, Framework for Improvement by Vertical Enhancement (FIVE) by implementing it into E3SM. FIVE aims to improve representation of the target cloud, low level cloud for this project, with use of a locally high vertical resolution for computation of selected processes. FIVE was assessed via direct comparison among E3SM, E3SM-FIVE, and satellite data as well as a newly developed ensemble artificial neural network methodology. We demonstrated that E3SM-FIVE remarkably improves marine stratocumulus representation. To advance the FIVE methodology, we took a first step toward the adaptive vertical grid in the FIVE method by modifying the E3SM single column model. For future application of FIVE to the global storm resolving model with a few km horizontal grid resolution, we developed the vertical-meridional two-dimensional (2D) Hadley circulation model, which allows one to run simulations with much higher vertical resolution and significantly longer duration than current three-dimensional global storm resolving model. During the second phase of the project (2021/05-2023/11; period for this technical report), we sought a way to appropriately transform FIVE to a regionalized version of FIVE, which allows one to select locations with/without FIVE. In parallel, we demonstrated that E3SM-FIVE with a 25-km mesh significantly reduced the bias associated with coastal stratocumulus. Furthermore, we showed that the same improvement was able to be obtained with the use of both the Regional Refined Model (RRM) targeted to one of the stratocumulus regions with 25-km resolution and FIVE. We explored a new implementation strategy of FIVE with our 2D Hadley circulation model. In parallel we applied the 2D Hadley circulation model to study the double intertropical convergence zone bias with storm resolving model resolution and aerosol-cloud interactions within the Hadley circulation with near large eddy simulation resolution. Last, we have been investigating Arctic mixed-phase stratocumulus clouds with large eddy simulations in order to improve their representation in global models. During the course of the entire project, 6 journal articles were published, and 3 manuscripts are currently in preparation. We gave a total of 30 presentations at various domestic and international conferences. In addition we gave 6 seminar talks at universities and a national laboratory. E3SM- FIVE is available as a branch of E3SM.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Structure of supersonic jet flow and its radiated sound

The present paper explores the use of large-eddy simulations as a tool for predicting noise from first principles. A high-order numerical scheme is used to perform large-eddy simulations of a supersonic jet flow with emphasis on capturing the time-dependent flow structure representating the sound source. The wavelike nature of this structure under random inflow disturbances is demonstrated. This wavelike structure is then enhanced by taking the inflow disturbances to be purely harmonic. Application of Lighthill's theory to calculate the far-field noise, with the sound source obtained from the calculated time-dependent near field, is demonstrated. Alternative approaches to coupling the near-field sound source to the far-field sound are discussed.

Mankbadi, Reda R.↗
DOE OSTI2020

Dataset for "FLEXPART-WRF simulations to assess dust transport in the convective boundary layer at the Southern Great Plains site"

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth’s radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud-relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large-eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large-eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART-WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi-single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. These results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Unsteady CFD Simulations of a Compression Corner Geometry Using Wall-Modeled LES Methods in Loci/CHEM

Several wall-modeled large eddy simulation (WMLES) methods are tested by simulating an unsteady Mach 2.0 compression corner geometry in Mississippi State’s Loci/CHEM solver. This study is conducted to evaluate the usage and requirements of these WMLES methods for applications regarding fluctuating pressure environments on launch vehicles with computational fluid dynamics (CFD). Two hybrid Reynolds-averaged Navier-Stokes (RANS)-large eddy simulation (LES) methods, Dynamic Hybrid RANS-LES (DHRL) and Improved Delayed Detached Eddy Simulation (IDDES), and one wall-stress-model, the Algebraic Wall Model for Wall-Modeled LES (AWMLES), are tested on varying grid and timestep refinement levels. These grid and timestep sizes are chosen to test the minimum requirements for successfully running these WMLES methods. The simulations are evaluated based on turbulent boundary layer properties in the developed boundary layer as well as unsteady quantities relating to fluctuating pressure environments in the region of the compression corner. The DHRL method shows good agreement with the comparison wind tunnel data and shows good grid and timestep convergence. The results from the IDDES and WMLES simulations show good agreement for several quantities with some discrepancies regarding others. The results presented in this paper will be used to inform further studies in predicting unsteady environments on higher-complexity geometries.

Bryson Frank↗