Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “integration study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Integrated Experimental and Modeling Study of Geochemical Reactions of Simple Fracturing Fluids with Caney Shale

Interactions between rock minerals and hydraulic fluids directly impact the geochemical and geomechanical properties of shale formations. However, the mechanisms of geochemical reactions in shale unconventional reservoirs remain poorly understood. Here, to investigate the geochemical reactions between shale and hydraulic fracturing fluids, a series of batch reactor experiments were undertaken. Three rock samples with different mineralogical compositions and three fluid samples of different compositions (deionized water, deionized water + 2% potassium chloride (KCl), and deionized water + 0.5% choline chloride (C 5 H 14 ClNO) were used. Experiments were undertaken at reservoir temperature and atmospheric pressure. Elemental compositions of effluents after 1, 3, 7, 14, 28 days were analyzed using Inductively Couple Plasma Mass Spectrometry (ICP-MS). Medical Computed Tomography (CT) scan and X-ray Fluorescence (XRF) were conducted on the entire core run to help upscale results obtained from rock-fluid interaction experiments. Geochemical modeling using a reactive simulator, TOUGHREACT, was undertaken to corroborate experimental results. Results show that lower pH triggered high dissolution rates in the rock samples, especially the carbonate components. As pH increased, the rate of dissolution declined significantly, though for most cases dissolution still continued. Observed dissolved silica concentrations were much higher than the quartz solubility, suggesting that much of the silica originates from more soluble silica polymorphs and possibly desorption from clay mineral exchange sites. Concentration of most elemental species in solution increased but aluminium and magnesium concentrations declined rapidly following initial entry into solution. Geochemical modeling corroborated the conclusions regarding mineral dissolution and precipitation observed from experiments, notably; the dissolution of calcite and oxidation of pyrite in reacted shale samples, the likely presence of silica polymorphs such as opal, chalcedony or amorphous silica in these samples, and the reduction of Al and Mg concentrations in solution by precipitation of secondary aluminosilicate phases. The de-flocculation of clay minerals during reaction implies fines migration after hydraulic fracturing. This is detrimental to reservoir productivity as clay fines are displaces and lodged within the micro and nano-fractures created during fracturing. The immediate consumption of aluminium and magnesium also has implications on blockage of hydrocarbon pathways due to precipitation of new minerals in these locations.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Elucidating the Atomic Structures of the Gel Layer Formed during Aluminoborosilicate Glass Dissolution: An Integrated Experimental and Simulation Study

The altered glasses produced during aqueous dissolution of silicate and borosilicate glasses are among the most complex structures to understand at the atomic level due to their amorphous nature, random porosity and various levels of hydration. In this study, we gained insights of the complex atomic structures of altered aluminoborosilicate glasses by combining a range of experimental and computational approaches. The altered glasses were prepared by dissolution of three glasses with varying level of alumina in acid for 7 days. A comprehensive set of experimental [elemental analysis, high-energy X-ray diffraction, 29 Si and 27 Al solid-state nuclear magnetic resonance (NMR), and O 1s X-ray photoelectron spectroscopy (XPS)] and modeling (molecular dynamics (MD) simulations using non-reactive and reactive force fields) were used to study the atomic structures of these altered glasses. Elemental analysis showed that most of the B in the pristine glasses was leached into the solution and was not contained in the altered glass. The 29 Si and 27 Al solid-state NMR spectra revealed that the altered glasses have more polymerized silicate network as compared to those in the pristine glasses due to the reformation of linkages among Si and Al oxygen polyhedral in the altered glasses. The bridging and non-bridging (or hydroxyl O) atoms in the altered glasses were also quantified from their O 1s XPS spectra. Atomic structure models of the altered glasses were constructed by using MD simulations using the reactive force field based on the compositional information obtained from experiments. Various pore structures were generated using the charge-scaling (CS) method by using different initial densities and CS temperatures; the best CS parameters of each alternated glass were then determined by comparing with the experimental structure factors obtained from high energy X-ray diffraction. Pore and the atomic structures and vibrational properties around these pore surfaces were analyzed. Furthermore, these results from this comprehensive study thus provides a realistic insight into the pore morphology, atomic structure, and vibrational properties of altered glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Integrated in situ spectroscopic studies on syngas production from partial oxidation of methane catalyzed by atomically dispersed rhodium cations on ceria

Catalytic reforming of methane to produce syngas is an important strategy for producing value-added chemicals. The conventional reforming catalyst relies on supported nickel nanoparticles. Here, in this work, we investigated singly dispersed Rh cations anchored on a CeO 2 catalyst (Rh 1 /CeO 2 ) for high activity and selectivity towards the production of syngas via partial oxidation of methane (POM) in the temperature range of 600–700 °C. The yields of H 2 and CO at 700 °C are 83% and 91%, respectively. The anchored Rh 1 atoms on CeO 2 of Rh 1 /CeO 2 are in the cationic state, and on an average each Rh 1 atom coordinates with 4–5 surface lattice oxygen atoms of CeO 2 . Compared to inert CeO 2 for POM, via the incorporation of single-atom sites, Rh 1 modifies the electronic state of oxygen atoms proximal to the Rh 1 atoms and thus triggers the catalytic activity of CeO 2 . The high activity of single-atom catalyst Rh 1 /CeO 2 suggests that the incorporation of single atoms of transition metals to the surface of a reducible oxide can modulate the electronic state of proximal anions of the oxide support toward forming an electronic state favorable for the selective formation of ideal products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Melting Behavior of Hydrogen Direct Reduced Iron in Molten Steel and Slag: An Integrated Computational and Experimental Study

Direct reduced iron (DRI) and hot briquetted iron (HBI) are essential feedstocks for tramp element control in the electric arc furnace (EAF). Due to greenhouse gas (GHG) concerns related to CO2 emissions, hydrogen as a substitute for natural gas and a reductant in DRI production is being widely explored to reduce GHG emissions in ironmaking. This study examines the melting behavior of hydrogen DRI (H-DRI) pellets in the EAF containing low-carbon (0.1 wt.%) molten steel and molten slag. A computational heat transfer model was developed to predict the melting behavior of H-DRI pellets. To validate the model, a set of experimental laboratory simulations was conducted by immersing H-DRI in a molten steel bath and slag. The temperature history at the center of the pellet during melting and the shell thickness at different melting stages were utilized to validate the model. The simulation results agree with the experimental measurements of steel balls and H-DRI in different metallic molten steel and slag baths.

Materials Science↗
NASA NTRS1973

Feasibility study of the numerical integration of shell equations using the field method

The field method is developed for arbitrary open branch domains subjected to general linear boundary conditions. Although closed branches are within the scope of the method, they are not treated here. The numerical feasibility of the method has been demonstrated by implementing it in a computer program for the linear static analysis of open branch shells of revolution under asymmetric loads. For such problems the field method eliminates the well-known numerical problem of long subintervals associated with the rapid growth of extraneous solutions. Also, the method appears to execute significantly faster than other numerical integration methods.

Cohen, G. A.↗
NASA NTRS1978

Review of the Air Force summer study program on the integration of wind tunnels and computers

The present state of computational fluid dynamics and its impact on the design cycle and computer requirements for future developments in this field were explored. The increase in productivity and efficiency which experimental facilities can achieve by a close integration with computers was investigated together with possible improvements in simulation quality of wind tunnels in conjunction with computer control. Research experiments are outlined to provide a better understanding of the physics of fluid flow and to assist in the modeling of these phenomena for computational methods, with primary emphasis on turbulent flows.

Marschner, B. W.↗
NASA NTRS1986

Evaluation of automated decision making methodologies and development of an integrated robotic system simulation: Study results

The implementation of a generic computer simulation for manipulator systems (ROBSIM) is described. The program is written in FORTRAN, and allows the user to: (1) Interactively define a manipulator system consisting of multiple arms, load objects, targets, and an environment; (2) Request graphic display or replay of manipulator motion; (3) Investigate and simulate various control methods including manual force/torque and active compliance control; and (4) Perform kinematic analysis, requirements analysis, and response simulation of manipulamotion. Previous reports have described the algorithms and procedures for using ROBSIM. These reports are superseded and additional features which were added are described. They are: (1) The ability to define motion profiles and compute loads on a common base to which manipulator arms are attached; (2) Capability to accept data describing manipulator geometry from a Computer Aided Design data base using the Initial Graphics exchange Specification format; (3) A manipulator control algorithm derived from processing the TV image of known reference points on a target; and (4) A vocabulary of simple high level task commands which can be used to define task scenarios.

Haley, D. C.↗
NASA NTRS1985

Spacelab life sciences flight experiments - An integrated approach to the study of cardiovascular deconditioning and orthostatic hypotension

A Spacelab experiment to study cardiovascular deconditioning and orthostatic hypotension is proposed. Previous experiments that have attempted to explain the factors which cause alterations in cardiovascular regulation are investigated. Based on these observations a hypothesis which states cephalad fluid shift produces cardiovascular changes is studied. The testing of the hypothesis is to include the analysis of physiological and anatomical changes in humans and animals for preflight and in-flight periods. The procedures and measurement techniques for the experiment are described.

Gaffney, F. A.↗
NASA NTRS1989

A numerical study of hypersonic propulsion/airframe integration problem

A numerical analysis procedure useful in the propulsion-airframe integration problem has been established. Flow around a generic hypersonic vehicle forebody is solved using Parabolized Navier-Stokes equations and Thin Layer Navier-Stokes equations. Forebody cross sectional geometry corresponds to a two-ellipse configuration. Effect of forebody geometry on the flow structure, especially at the engine inlet location, is analyzed.

Narayan, J. R.↗
NASA NTRS1997

Blazar studies with CGRO and INTEGRAL

Issues involved in galaxy unification through the two scenarios of unification through evolution and unification through orientation are reviewed, and the importance of observations at soft gamma ray energies for the characterization of the properties of blazars is discussed. The observation of blazars with the International Gamma Ray Astrophysics Laboratory (INTEGRAL) and the Compton Gamma Ray Observatory (CGRO) is considered. The spectral density field is described and the spectral energy distributions of different classes of galaxies are detailed. It is concluded that the scientific returns expected from INTEGRAL include: the strongest gamma ray tests for beaming gamma-gamma transparency arguments and the Elliot-Shapiro relationship; the discovery that infrared luminous galaxies harbor and fuel supermassive black holes; the discovery of variable spectral hardenings in quasars, and the identification of trends in the high energy behavior of radio galaxies, radio quasars and blazars.

Dermer, Charles D.↗
NASA NTRS2002

Small Engine Technology (SET). Task 33: Airframe, Integration, and Community Noise Study

Task Order 33 had four primary objectives as follows: (1) Identify and prioritize the airframe noise reduction technologies needed to accomplish the NASA Pillar goals for business and regional aircraft. (2) Develop a model to estimate the effect of jet shear layer refraction and attenuation of internally generated source noise of a turbofan engine on the aircraft system noise. (3) Determine the effect on community noise of source noise changes of a generic turbofan engine operating from sea level to 15,000 feet. (4) Support lateral attenuation experiments conducted by NASA Langley at Wallops Island, VA, by coordinating opportunities for Contractor Aircraft to participate as a noise source during the noise measurements. Noise data and noise prediction tools, including airframe noise codes, from the NASA Advanced Subsonic Technology (AST) program were applied to assess the current status of noise reduction technologies relative to the NASA pillar goals for regional and small business jet aircraft. In addition, the noise prediction tools were applied to evaluate the effectiveness of airframe-related noise reduction concepts developed in the AST program on reducing the aircraft system noise. The AST noise data and acoustic prediction tools used in this study were furnished by NASA.

Lieber, Lys S.↗