SEARCH · Engineering Papers

Results for “global support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Importance of expansion and contraction in the formation of tectonic features on the Moon

The lack of globally distributed tectonic features on the lunar surface has been used to argue against significant changes in the radius of the Moon since the formation of the presently observed surface, which dates to the end of heavy bombardment about 3.9 Ga. This observation has been used previously to limit the maximum stresses to approximately 100 MPa that could be supported by the lunar lithosphere without the formation of globally distributed tectonic features, which in turn limits the maximum radius changes to plus or minus 1 km for a purely elastic lithosphere. In a previous abstract, limits on the elastic expansion or contraction of the Moon were reexamined with respect to realistic failure stresses necessary to produce actual lunar tectonic features. In addition, limits on the permanent (plastic) strain that could be accommodated by non-mascon grabens and wrinkle ridges were considered with more severe constraints placed on the total reasonable expansion and contraction of the Moon since 3.9 Ga. In this abstract, considerations of the distribution and mechanisms of formation due to a planetary radius change or their accommodating much permanent plastic planetary expansion or contraction.

Golombek, M. P.↗

NASA NTRS1991

Isotopic compositions of carbonates and organic carbon from upper Proterozoic successions in Namibia: stratigraphic variation and the effects of diagenesis and metamorphism

The carbon isotope geochemistry of carbonates and organic carbon in the late Proterozoic Damara Supergroup of Namibia, including the Nama, Witvlei, and Gariep groups on the Kalahari Craton and the Mulden and Otavi groups on the Congo Craton, has been investigated as an extension of previous studies of secular variations in the isotopic composition of late Proterozoic seawater. Subsamples of microspar and dolomicrospar were determined, through petrographic and cathodoluminescence examination, to represent the "least-altered" portions of the rock. Carbon-isotopic abundances in these phases are nearly equal to those in total carbonate, suggesting that 13C abundances of late Proterozoic fine-grained carbonates have not been significantly altered by meteoric diagenesis, although 18O abundances often differ significantly. Reduced and variable carbon-isotopic differences between carbonates and organic carbon in these sediments indicate that isotopic compositions of organic carbon have been altered significantly by thermal and deformational processes, likely associated with the Pan-African Orogeny. Distinctive stratigraphic patterns of secular variation, similar to those noted in other, widely separated late Proterozoic basins, are found in carbon-isotopic compositions of carbonates from the Nama and Otavi groups. For example, in Nama Group carbonates delta 13C values rise dramatically from -4 to +5% within a short stratigraphic interval. This excursion suggests correlation with similar excursions noted in Ediacaran-aged successions of Siberia, India, and China. Enrichment of 13C (delta 13C> +5%) in Otavi Group carbonates reflects those in Upper Riphean successions of the Akademikerbreen Group, Svalbard, its correlatives in East Greenland, and the Shaler Group, northwest Canada. The widespread distribution of successions with comparable isotopic signatures supports hypotheses that variations in delta 13C reflect global changes in the isotopic composition of late Proterozoic seawater. Within the Damara basin, carbon-isotopic compositions of carbonates provide a potentially useful tool for the correlation of units between the Kalahari and Congo cratons. Carbonates depleted in 13C were deposited during and immediately following three separate glacial episodes in Namibia. The correspondence between ice ages and negative delta 13C excursions may reflect the effects of lowered sea levels; enhanced circulation of deep, cold, O2-rich seawater; and/or the upwelling of 13C-depleted deep water. Iron-formation is additionally associated with one of the glacial horizons, the Chuos tillite. Carbon-13 enriched isotopic abundances in immediately pre-glacial carbonates suggest that oceanographic conditions favored high rates of organic burial. It is likely that marine waters were stratified, with deep waters anoxic. A prolonged period of ocean stratification would permit the build-up of ferrous iron, probably from hydrothermal sources. At the onset of glaciation, upwelling would have brought 13C-depleted and iron-rich deep water onto shallow shelves where contact with cold, oxygenated surface waters led to the precipitation of ferric iron.

NASA Program Exobiology↗

DOE OSTI2026

Global metagenomics reveals plastid diversity and unexplored algal lineages

Photosynthetic organelles in eukaryotes originated through primary endosymbiosis with a cyanobacterium, an event that profoundly shaped the evolutionary landscape of the eukaryotic tree of life. Primary plastids in Archaeplastida, especially in cultivable plants and algae, contribute most to known plastid diversity. Secondary and higher-order endosymbiosis, involving eukaryotic hosts and algal endosymbionts, further spread photosynthesis among protists within the CASH lineages (Cryptophyta, Alveolata, Stramenopila, and Haptophyta). Despite various hypotheses explaining secondary plastid evolution and distribution, empirical support remains limited. Here, we employ cultivation-independent global metagenomics to expand plastid diversity and investigate plastid origins. We capture 1,027 plastid sequences, including 300 novel sequences belonging to previously unsequenced plastids and representing yet-to-be described microeukaryotes. This includes a new lineage that offers insights into plastid evolution in haptophytes and cryptophytes. Our results confirm that Archaeplastida plastids originate from an early branching cyanobacterial lineage closely related to Gloeomargaritales and identify the closest extant relative of Paulinella plastids. Additionally, our findings suggest two independent origins of secondary red-algal plastids, contributing to plastid diversity in CASH lineages and challenging the prevailing model of single secondary plastid origin. Our study highlights the importance of metagenomic data in uncovering biological diversity and advancing understanding of plastid relationships across photosynthetic eukaryotes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Energy barriers for Dy and H penetrating graphene on 6 H -SiC(0001) and freestanding bilayer graphene from first-principles calculations

Currently, intercalation of foreign guest atoms into two-dimensional (2D) layered van der Waals materials is an active research area motivated in part by the development of next-generation energy-storage technologies and optoelectronic devices. One such extensively studied 2D material is the graphene-on-SiC system. To realize and control the desired intercalated structures, it is fundamentally important to understand the kinetic process of intercalation. For the intercalation of a guest atom into graphene layers on SiC substrate, a critical kinetic parameter is the energy barrier of a guest atom penetrating the perfect graphene top layer into the gallery under it. However, accurate theoretical calculations for such penetration barriers are unavailable in literature. From our first-principles density functional theory calculations, we obtain the global energy barriers of 3.47 and 1.80 eV for single Dy and H atoms penetrating the graphene top layer on a graphene buffer layer supported by a Si-terminated 6H-SiC(0001) substrate, respectively. Furthermore, for comparison as well as for examining the lateral strain effects, we also obtain the global barriers of 5.05 and 1.50 eV for single Dy and H atoms penetrating freestanding bilayer graphene with a tensile strain of about 8.8% to match our model for supported graphene, as well as the global barriers of 7.21 and 4.18 eV for penetrating unstrained freestanding bilayer graphene, respectively. From corresponding minimum energy paths with multiple energy minima and saddle points, we can also obtain various local energy barriers and the global backward barrier from the graphene gallery back to the top surface.

2D materials↗

NASA NTRS1994

A strawman SLR program plan for the 1990s

A series of programmatic and technical goals for the satellite laser ranging (SLR) network are presented. They are: (1) standardize the performance of the global SLR network; (2) improve the geographic distribution of stations; (3) reduce costs of field operations and data processing; (4) expand the 24 hour temporal coverage to better serve the growing constellation of satellites; (5) improve absolute range accuracy to 2 mm at key stations; (6) improve satellite force, radiative propagation, and station motion models and investigate alternative geodetic analysis techniques; (7) support technical intercomparison and the Terrestrial Reference Frame through global collocations; (8) investigate potential synergisms between GPS and SLR.

Degnan, John J.↗

NASA NTRSDate not supplied

Understanding and Utilizing PBL Height Data from Multiple Observing Systems in the GEOS System

The accuracy of PBL height simulation is a key issue in many applications including forecasting near surface meteorology and air quality, however, it is a very challenging problem due to the lack of not only comprehensive, global Planetary Boundary Layer (PBL) observations but also a strategy and infrastructure to utilize PBL height data from a variety of sensors. Following the designation of PBL as an incubation class observable in the 2017 Decadal Survey, the PBL Incubation Study Team Report [14] made clear that “a future global PBL observing system requires modeling and data assimilation as essential components.” There is an urgent need for global modeling development in order to utilize Program of Record (POR) observations, assess their impacts, and identify gaps to be filled by future PBL missions. Our overall objective is to develop PBL data assimilation capabilities in the NASA Global Earth Observing System (GEOS), focusing on PBL height from multiple observing systems, to support the assessment and use of future PBL observations. The NASA GEOS system is composed of the GEOS global atmospheric general circulation model (AGCM) and the atmospheric data assimilation system (ADAS). The PBL parameterizations include the “Lock” K-profile scheme driven by surface and cloud-top buoyancy fluxes ([4]), and the “Louis” local scheme for stable conditions based on the Richardson number ([5]). Above the mixed layer defined by the Lock surface plume, shallow cumulus convection is represented by the mass flux scheme of [9]. Additional parameterizations are summarized in [1]. The ADAS employs the hybrid 4D Ensemble- Variational (EnVar) configuration ([15]), with the ensemble providing flow-dependent background error covariance information. The resultant analysis increments are fed back to the forecast model through the 4D incremental analysis update (IAU) approach ([11]). In this study, PBL height data are being or have been generated from radiosondes, GNSS RO, satellite (CATS, CALIPSO and ICESat-2) and ground-based (MPLNET) lidars, and wind profiler. Investigations have been conducted to specify quality marks for PBL height retrievals for the data assimilation purpose. These PBL height data have different strengths and weaknesses ([2], [3], [6], [7], [8], [10]), and the satellite PBL height data provide better global coverage and complement in-situ PBL height data. Radiosondes offer high accuracy and in situ measurement of temperature and humidity profiles, but with poor spatio-temporal sampling. The in-situ observing systems like MPLNET and wind profiler provide long history of PBL height records at each station. The GNSS RO based PBL height is retrieved based on the sharp gradients in refractivity profile that represent the fine vertical structure of temperature and moisture changes above the PBL. However, not all RO refractivity profiles reach the surface depending on location and regime, and RO refractivity retrievals can be negatively biased below 2km. The PBL height data from satellite lidars provide high resolution along track PBL height retrievals, but over land they are affected by previous day convective PBL aerosol and strongly associated with mixing layer and retrievals cannot be made below thick, attenuating clouds. A successful assimilation of PBL height data requires a thorough understanding of the observing method and the retrieval algorithm for each observing system in order to use the PBL height data from multiple observing systems properly. Due to the sensitivity of PBL height data to the observing method and choice of algorithm, it is important to use a model definition appropriate for each observation type to compute differences between PBL height data and model PBL height (OmFs). The GEOS model currently includes two PBL height definitions suitable for direct comparison with observed PBL height, and additional definitions are being added in this study. Evaluation of different model PBL height definitions is underway. Meanwhile, efforts have been made in the GEOS data assimilation system to develop PBL height data assimilation capability. PBL height data can be assimilated using two different approaches. The traditional approach is to construct an observation operator and its tangent linear and adjoint, which link control variables to PBL height data from each observing system. This observation operator can be very complicated, e.g., the lidar-based PBL height observation operator includes the backscatter lidar forward observation operator, the algorithm to derive PBL height from attenuated total backscatter, interpolation, and calculations handling the mismatch between observed and model scales. The other approach is to augment PBL height to the control variable vector, and it is adopted in this study. The latter approach was also used in previous studies, e.g., the assimilation of PBL height data from radiosonde and aircraft in the Real Time Mesoscale Analysis (RTMA) system for a dispersion modelling study ([13]); the PBL height assimilation study using lidar PBL height data at Greensburg, Kansas for a field campaign ([12]). The PBL height assimilation from multiple observing systems in this study allows us to take advantage of the diverse PBL height data that provide much better global coverage collectively under different meteorological conditions and with different temporal and spatial scales. As all the PBL heights are tightly coupled with the PBL thermodynamic variables, the strong correlations, which are provided by the 4D ensemble forecast, enable PBL height data from various sources to interact and combine coherently and provide additional information for PBL temperature and moisture fields. The results of comparisons among PBL height data from different sources and the evaluation of the model PBL height definitions with the PBL height data will be presented, and the PBL height data synergy strategies and preliminary results will also be discussed at the conference.

Y. Zhu↗

NASA NTRSDate not supplied

Climatology of Global Precipitation Measurement Mission Precipitation Regimes and Implications for Global Estimates of Vertical Winds

The Global Precipitation Measurement (GPM) mission Validation Network (VN) framework leverages over 118 ground-based polarimetric Doppler radars to validate a large subset of precipitation measurements and retrievals from the GPM Dual-frequency Precipitation Radar (DPR). Recently, GPM DPR reflectivity profiles within the VN have been classified according to their convective regime using unsupervised machine learning techniques. The archetypal regimes are stratiform, convective, mixed stratiform-convective (e.g., transition regions), and “other” (e.g., peripheral regions of light precipitation). Subcategories within these four primary regimes vary according to the characteristic depth of included reflectivity profiles, resulting in 12 main GPM DPR precipitation profile categories. Polarimetry of ground-based Doppler radars in the VN offers additional insights into the types of precipitation, while pairs of radars positioned near each other enable retrieval of vertical winds via dual-Doppler analysis. Geometrically matched to the DPR reflectivity profiles in the GPM VN, these ground-based data and retrievals contribute more detailed characterization of the distinct kinematic and microphysical structures associated with each of the 12 DPR precipitation regimes. DPR reflectivity profiles linked with wind in the VN are restricted to GPM overpasses of proximal radar pairs that allow dual-Doppler analysis. Although a limited subset of DPR profiles in the VN are matched with vertical motion, agreement between the reflectivity structures paired with wind data and those of the greater DPR dataset in the VN suggest that estimates of vertical motion may be inferred in regions without ground-based measurements. We present a climatology of the 12 convective regimes identified within the DPR VN dataset as well as early efforts to estimate the kinematic and microphysical structures of precipitation profiles within the greater GPM DPR dataset by applying machine learning techniques. Precipitation data paired with global estimates of vertical winds from these efforts offer early insight to and support upcoming missions to retrieve convective mass flux, including the Investigation of Convective Updrafts (INCUS) in the Tropics and the global Atmosphere Observing System (AOS).

Precipitation↗

NASA NTRS2008

Assessment and Mission Planning Capability For Quantitative Aerothermodynamic Flight Measurements Using Remote Imaging

High resolution calibrated infrared imagery of vehicles during hypervelocity atmospheric entry or sustained hypersonic cruise has the potential to provide flight data on the distribution of surface temperature and the state of the airflow over the vehicle. In the early 1980 s NASA sought to obtain high spatial resolution infrared imagery of the Shuttle during entry. Despite mission execution with a technically rigorous pre-planning capability, the single airborne optical system for this attempt was considered developmental and the scientific return was marginal. In 2005 the Space Shuttle Program again sponsored an effort to obtain imagery of the Orbiter. Imaging requirements were targeted towards Shuttle ascent; companion requirements for entry did not exist. The engineering community was allowed to define observation goals and incrementally demonstrate key elements of a quantitative spatially resolved measurement capability over a series of flights. These imaging opportunities were extremely beneficial and clearly demonstrated capability to capture infrared imagery with mature and operational assets of the US Navy and the Missile Defense Agency. While successful, the usefulness of the imagery was, from an engineering perspective, limited. These limitations were mainly associated with uncertainties regarding operational aspects of data acquisition. These uncertainties, in turn, came about because of limited pre-flight mission planning capability, a poor understanding of several factors including the infrared signature of the Shuttle, optical hardware limitations, atmospheric effects and detector response characteristics. Operational details of sensor configuration such as detector integration time and tracking system algorithms were carried out ad hoc (best practices) which led to low probability of target acquisition and detector saturation. Leveraging from the qualified success during Return-to-Flight, the NASA Engineering and Safety Center sponsored an assessment study focused on increasing the probability of returning spatially resolved scientific/engineering thermal imagery. This paper provides an overview of the assessment task and the systematic approach designed to establish confidence in the ability of existing assets to reliably acquire, track and return global quantitative surface temperatures of the Shuttle during entry. A discussion of capability demonstration in support of a potential Shuttle boundary layer transition flight test is presented. Successful demonstration of a quantitative, spatially resolved, global temperature measurement on the proposed Shuttle boundary layer transition flight test could lead to potential future applications with hypersonic flight test programs within the USAF and DARPA along with flight test opportunities supporting NASA s project Constellation.

Horvath, Thomas↗

NASA NTRS2014

GPM Solar Array Gravity Negated Deployment Testing

NASA Goddard Space Flight Center (GSFC) successfully developed a g-negation support system for use on the solar arrays of the Global Precipitation Measurement (GPM) Satellite. This system provides full deployment capability at the subsystem and observatory levels. In addition, the system provides capability for deployed configuration first mode frequency verification testing. The system consists of air pads, a support structure, an air supply, and support tables. The g-negation support system was used to support all deployment activities for flight solar array deployment testing.

Penn, Jonathan↗

NASA NTRS2011

Multi-Scale Hydrometeorological Modeling, Land Data Assimilation and Parameter Estimation with the Land Information System

The Land Information System (LIS; http://lis.gsfc.nasa.gov) is a flexible land surface modeling framework that has been developed with the goal of integrating satellite-and ground-based observational data products and advanced land surface modeling techniques to produce optimal fields of land surface states and fluxes. As such, LIS represents a step towards the next generation land component of an integrated Earth system model. In recognition of LIS object-oriented software design, use and impact in the land surface and hydrometeorological modeling community, the LIS software was selected as a co-winner of NASA?s 2005 Software of the Year award.LIS facilitates the integration of observations from Earth-observing systems and predictions and forecasts from Earth System and Earth science models into the decision-making processes of partnering agency and national organizations. Due to its flexible software design, LIS can serve both as a Problem Solving Environment (PSE) for hydrologic research to enable accurate global water and energy cycle predictions, and as a Decision Support System (DSS) to generate useful information for application areas including disaster management, water resources management, agricultural management, numerical weather prediction, air quality and military mobility assessment. LIS has e volved from two earlier efforts -- North American Land Data Assimilation System (NLDAS) and Global Land Data Assimilation System (GLDAS) that focused primarily on improving numerical weather prediction skills by improving the characterization of the land surface conditions. Both of GLDAS and NLDAS now use specific configurations of the LIS software in their current implementations.In addition, LIS was recently transitioned into operations at the US Air Force Weather Agency (AFWA) to ultimately replace their Agricultural Meteorology (AGRMET) system, and is also used routinely by NOAA's National Centers for Environmental Prediction (NCEP)/Environmental Modeling Center (EMC) for their land data assimilation systems to support weather and climate modeling. LIS not only consolidates the capabilities of these two systems, but also enables a much larger variety of configurations with respect to horizontal spatial resolution, input datasets and choice of land surface model through "plugins". LIS has been coupled to the Weather Research and Forecasting (WRF) model to support studies of land-atmosphere coupling be enabling ensembles of land surface states to be tested against multiple representations of the atmospheric boundary layer. LIS has also been demonstrated for parameter estimation, who showed that the use of sequential remotely sensed soil moisture products can be used to derive soil hydraulic and texture properties given a sufficient dynamic range in the soil moisture retrievals and accurate precipitation inputs.LIS has also recently been demonstrated for multi-model data assimilation using an Ensemble Kalman Filter for sequential assimilation of soil moisture, snow, and temperature.Ongoing work has demonstrated the value of bias correction as part of the filter, and also that of joint calibration and assimilation.Examples and case studies demonstrating the capabilities and impacts of LIS for hydrometeorological modeling, assimilation and parameter estimation will be presented as advancements towards the next generation of integrated observation and modeling systems

Peters-Lidard, Christa D.↗

NASA NTRSDate not supplied

SatCORPS Global Cloud Composite (GCC): the Design and Delivery of A High Quality, High Resolution, Global Cloud Product Available in Near-Real Time

The NASA Satellite ClOud and Radiation Property retrieval System (SatCORPS) supports the development of an analysis ready and cloud-optimized data transformation pipeline and geospatial service enablement of a global cloud composite (GCC) product derived from global geostationary satellite imagery. This geospatial service will be available at high temporal and spatial resolution via the SatCORPS web mapping application for visualization and analysis as well as direct ingestion to common geospatial software and custom programming. The resulting global cloud composite products from the processing pipeline can then be geospatially-service enabled as ArcGIS Image Services and Open Geospatial Consortium (OGC) Web Mapping/Coverage Services for visualization and analysis via a web mapping application and common geospatial software. Near real time global observations are created through the composition of five geostationary satellites that provides modelling and forecasting communities with the capability to provide high quality and timely information to start the projection process. The Global Cloud Composite product combines information from geostationary satellites, GOES-16, GOES-17, Himawari-8, Meteosat-11 and Meteosat-9 to create a single global composite netcdf file and images using the different products within the netcdf file. The SatCORPS team, though our Global Cloud Composite (GCC) product and web-based visualization tools including Geographical Information System (GIS) services provide near real time global cloud product information to both automated processes and traditional web users that is timely and high quality derived from geostationary satellites. The Global Cloud Composite product takes advantage of the scalable processing resources provided by the AWS batch service to provide new composites every thirty minutes. Because information from each of the low earth orbiting satellites is available on schedules tuned to the specific satellite, the processing algorithm temporally composites the final dataset as each satellite’s information becomes available. The SatCORPS team has leveraged our experience using Amazon Web Services (AWS) to build a low latency high availability tool that allows end users both human and automated to acquire high quality and high-resolution Geostationary Earth Orbiting (GEO) information at zero cost to the end user. This presentation will describe how we architected and implemented the service as well as lessons learned based on our experiences both developing and operating the system. The lessons learned include how we integrated multiple services including Amazon Batch, Amazon S3 and Amazon Lambda service to create a low cost but high-performance processing system that is capable of identifying and processing the most appropriate satellite overpass information into global cloud composites. We will also describe our web-based tools including our Geographic Information System that can be used for visualization and analysis. The products from the processing can be geospatially-service enabled as ArcGIS Image Services and Open Geospatial Consortium (OGC) Web Mapping/Coverage Services for visualization and analysis via a web mapping application and common geospatial software. The SatCORPS Global Composite Cloud product provides sophisticated global composited cloud research products with very low latency that we see that as filling a rapidly growing need in the research and modelling community with no up-front nor ongoing costs associated with downloading or using the information.

AWS AMCE SMCE GCC SATCORPS GLOBAL CLOUD COMPOSITE ↗

DOE OSTI2020

A global ensemble of ocean wave climate projections from CMIP5-driven models

This dataset, produced through the Coordinated Ocean Wave Climate Project (COWCLIP) phase 2, represents the first coordinated multivariate ensemble of 21st Century global wind-wave climate projections available (henceforth COWCLIP2.0). COWCLIP2.0 comprises general and extreme statistics of significant wave height (H S ), mean wave period (T m ), and mean wave direction (θ m ) computed over time-slices 1979–2004 and 2081–2100, at different frequency resolutions (monthly, seasonally and annually). The full ensemble comprising 155 global wave climate simulations is obtained from ten CMIP5-based state-of-the-art wave climate studies and provides data derived from alternative wind-wave downscaling methods, and different climate-model forcing and future emissions scenarios. The data has been produced, and processed, under a specific framework for consistency and quality, and follows CMIP5 Data Reference Syntax, Directory structures, and Metadata requirements. Technical comparison of model skill against 26 years of global satellite measurements of significant wave height has been undertaken at global and regional scales. This new dataset provides support for future broad scale coastal hazard and vulnerability assessments and climate adaptation studies in many offshore and coastal engineering applications.

Science & Technology - Other Topics↗

DOE OSTI2021

ESS-DIVE reporting format for field measurements of soil respiration

This is a new data and metadata reporting format for soil respiration data, based on engagement with a wide range of researchers in the earth and ecological sciences as well as expert advisory panels. Reporting formats are intended to be ‘bottom-up’, community-developed documents and templates that can enable consistent, findable, accessible, interoperable, and reproducible (FAIR) data; our goal was a reporting format that would be relevant and useful for synthesis activities, optimizing data discoverability and usability while not placing an undue burden on data contributors. The format is split into two levels of information—metadata about chambers (used to measure soil respiration in the field), and the measured data themselves. The file data_reportingformat_template.xlsx contains information on how the data table should be structured, including field names, field descriptions, and units; the chammetadata_reportingformat_template.xlsx file contains similar information for the chamber-level metadata. Fundamentally, this format aims to enable FAIR data through an easy-to-use guide for data providers interested in formatting their data in a common way, and provide ‘future-proofing’ capabilities to support reanalyses of soil respiration data, a globally-important component of the carbon cycle.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Investigating the Impacts of Aqueous-Phase Processing on Organic Aerosol Chemical Climatology Using ARM and ASR Observations

This project improved understanding of how atmospheric aerosol particles form and evolve, with a focus on the role of water-driven (aqueous-phase) chemical reactions in the atmosphere. These processes occur in clouds, fog, and humid air and can significantly change the composition and properties of airborne particles, known as aerosols, which influence air quality and climate. By combining field measurements, laboratory experiments, and advanced analytical techniques, the project identified key chemical signatures that allow scientists to distinguish particles formed through aqueous processes from those formed in the gas phase. Observations from multiple environments, including wildfire smoke, urban regions, and cloud-influenced areas, show that aqueous chemistry is an important pathway for particle formation and aging. The project also developed new measurement approaches using uncrewed aerial systems (UAS) to capture how aerosol composition varies with altitude, providing critical insights into how particles interact with clouds. In addition, new data analysis frameworks were created to better interpret long-term aerosol measurements and improve characterization of particle sources and transformations. These results have been integrated into a global database of aerosol measurements and used to support atmospheric modeling efforts. Overall, the project provides important tools and knowledge to improve predictions of how aerosols affect climate and air quality, particularly through their interactions with radiation and clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1977

Reducing greenhouses and the temperature history of earth and Mars

It has been suggested that NH3 and other reducing gases were present in the earth's primitive atmosphere, enhancing the global greenhouse effect; data obtained through isotopic archeothermometry support this hypothesis. Computations have been applied to the evolution of surface temperatures on Mars, considering various bolometric albedos and compositions. The results are of interest in the study of Martian sinuous channels which may have been created by aqueous fluvial errosion, and imply that clement conditions may have previously occurred on Mars, and may occur in the future.

Sagan, C.↗

NASA NTRS1978

Mount Agung eruption provides test of global climatic perturbation

The Mount Agung volcanic eruption in 1963 provides the best-documented global radiative perturbation to the earth's atmosphere currently available. Data on stratospheric aerosols produced by this eruption have been used as input to a model for the atmospheric thermal structure. The computed magnitude, sign, and phase lag of the temperature changes in both the stratosphere and the troposphere are in good agreement with observations, providing evidence that the climatic response to a global radiative perturbation is significant as well as support for the use of theoretical models to predict climatic effects.

Hansen, J. E.↗

NASA NTRS1980

Theoretical studies of solar oscillations

Possible sources for the excitation of the solar 5 minute oscillations were investigated and a linear non-adiabatic stability code was applied to a preliminary study of the solar g-modes with periods near 160 minutes. Although no definitive conclusions concerning the excitation of these modes were reached, the excitation of the 5 minute oscillations by turbulent stresses in the convection zone remains a viable possibility. Theoretical calculations do not offer much support for the identification of the 160 minute global solar oscillation (reported by several independent observers) as a solar g-mode. A significant advance was made in attempting to reconcile mixing-length theory with the results of the calculations of linearly unstable normal modes. Calculations show that in a convective envelope prepared according to mixing length theory, the only linearly unstable modes are those which correspond to the turbulent eddies which are the basic element of the heuristic mixing length theory.

Goldreich, P.↗

NASA NTRS1984

ISEE-3/ICE navigation analysis

Efforts to assure communications continuity and navigational accuracy for the ISEE-3 (now called the International Cometary Explorer - ICE) spacecraft as it heads toward a passage through the Giacobini-Zimmer (G-Z) comet tail are reviewed. Sufficient energy was gained with a series of lunar swingbys to take the rendezvous attempt possible. Communications will be by an S-band link though the upgraded Deep Space Network. The G-Z encounter is scheduled for September 1983. A 512 bps data rate will be supported by 64-3 m dishes at various global sites. The tracking will continue for 6 mos as the spacecraft moves into an orbit that parallels that of Halley's Comet. Ground-based recovery of the G-Z location in the spring of 1984 provided data for calculating the ephemerides required for configuring a major course correction for ICE 100 days before rendezvous.

Efron, L.↗