Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Agriculture, forestry, range resources

In the area of crop specie identification, it has been found that temporal data analysis, preliminary stratification, and unequal probability analysis were several of the factors that contributed to high identification accuracies. Single data set accuracies on fields of greater than 80,000 sq m (20 acres) are in the 70- to 90-percent range; however, with the use of temporal data, accuracies of 95 percent have been reported. Identification accuracy drops off significantly on areas of less than 80,000 sq m (20 acres) as does measurement accuracy. Forest stratification into coniferous and deciduous areas has been accomplished to a 90- to 95-percent accuracy level. Using multistage sampling techniques, the timber volume of a national forest district has been estimated to a confidence level and standard deviation acceptable to the Forest Service at a very favorable cost-benefit time ratio. Range specie/plant community vegetation mapping has been accomplished at various levels of success (69- to 90-percent accuracy). However, several investigators have obtained encouraging initial results in range biomass (forage production) estimation and range readiness predictions. Soil association map correction and soil association mapping in new area appear to have been proven feasible on large areas; however, testing in a complex soil area should be undertaken.

Crea, W. J.↗

Remote sensing techniques for mapping range sites and estimating range yield

Image interpretation procedures for determining range yield and for extrapolating range information were investigated for an area of the Pine Ridge Indian Reservation in southwestern South Dakota. Soil and vegetative data collected in the field utilizing a grid sampling design and digital film data from color infrared film and black and white films were analyzed statistically using correlation and regression techniques. The pattern recognition techniques used were K-class, mode seeking, and thresholding. The herbage yield equation derived for the detailed test site was used to predict yield for an adjacent similar field. The herbage yield estimate for the adjacent field was 1744 lbs. of dry matter per acre and was favorably compared to the mean yield of 1830 lbs. of dry matter per acre based upon ground observations. Also an inverse relationship was observed between vegetative cover and the ratio of MSS 5 to MSS 7 of ERTS-1 imagery.

Benson, L. A.↗

Variable CO2 laser attenuator

An infrared wavelength variable attenuator based on contra-rotating germanium wedges is examined theoretically. The device redirects the paths of internal reflections associated with an optical flat to avoid closely spaced parallel beams at the output. Complementary wedges separated by an air gap compose an optical flat which, when combined with a masking arrangement, restricts unwanted reflections. A model of the device was built and experimentally evaluated. The results compare favorably with the dynamic range of attenuation of 2 to 50 db from theoretical calculations, and show a substantial reduction in the etalon effect associated with pairs of optical flats.

Klein, B. J.↗

An orbital radar mapper of venus in the 1980's: Mission design and analysis

The examination of Venus topography, obscured for photographic imaging, is reported in the application of airborne radar mapping systems to an orbiter mission about the planet. Extrapolating the improving capabilities of earth-based radar study of Venus into the 1980's is reported which suggests that only a non-uniform, poorly resolved surface profile will be possible relative to the potential for 100% coverage at 100 meter resolution with an orbital radar. The intent of this paper is: to define mission opportunities favorable for a Venus orbital mapper during the 1980's, to examine orbit design problems associated with mapping radar systems, to establish with flexibility exists for an adaptive mapping strategy, to contribute to the sizing of particular spacecraft systems, and to suggest a reference mission design and demonstrate feasibility.

Asnin, S. K.↗

Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

Smith, A. G.↗

Application of ERTS and EREP images to geologic investigations of the basin and range: Colorado plateau boundary in northwestern and north-central Arizona

The author has identified the following significant results. In the course of the ERTS investigation in the Cataract Creek Basin of the Coconino Plateau it was recognized that shallow perched ground water associated with the Kaibab Limestone could be discovered by means of drilling guided by geologic mapping aided by the use of ERTS imagery. At the Globe Ranch, the perched water table is only 5 meters beneath the surface at the site of the original, hand dug well. Recharge occurs from local runoff and from direct precipitation on the outcrop belt of the sandstone. This well provides water for the ranch at the rate of about 1,000 gallons a week. In order to explore the possibility of further developing this aquifer, unit 5 was mapped over an area of about 50 square miles in the vicinity of the hand-dug well, with negative results. A new location was then picked for drilling based on the occurrence of unit 5 in a favorable structural setting. This location was along a normal fault, and it was anticipated that water might be structurally trapped within the down-dropped block of the fault. Four shallow testholes were drilled and all encountered water. These four water-bearing holes are currently being monitored and will be tested to determine potential production of water from the local sandstone aquifer.

Goetz, A. F. H.↗

The origin of sinuous rilles

This report describes the distribution and morphology of sinuous rilles and presents data on rille geometry. Examples of the relation between sinuous rilles and the regional structure are given. Leading theories for the origin of sinuous rilles are discussed and evaluated. It is concluded that the general weight of evidence is against water erosion. The ash flow theory is not excluded, but evidence in its favor is weak. The best explanations involve lava tube formation for certain sinuous rilles, and faulting for others. In some cases, a gradation between faulting and igneous activity is noted.

Gornitz, V.↗

High voltage pulse ignition of mercury discharge hollow cathodes

A high voltage pulse generated by a capacitor discharge into a step-up transformer has been demonstrated capable of consistently igniting hollow cathode mercury discharges at propellant flows and heater power levels much below those required by conventional cathode starting. Results are presented for 3.2-mm diameter enclosed and open keeper cathodes. Starting characteristics are shown to depend on keeper voltage, mercury flow rate, heater power, keeper orifice size, emissive materials, and electrode to which the pulse is applied. This starting technique has been used to start a cathode over 10,000 times without any degradation of starting capability. The starting reliability, propellant and power savings offered by the high voltage pulse start should favorably impact performance of electron bombardment thrusters in missions requiring many on-off duty cycles.

Wintucky, E. G.↗

Mercury vapor hollow cathode component studies

An experimental study of starting and operating characteristics of conventional hollow cathodes and of hollow cathodes without alkaline earth emissive materials demonstrated that the emissive mix is essential to obtain the desired cathode operation. Loss of the emissive mix by evaporation and chemical reaction was measured. New insert designs consisting of emissive mix supported on nickel and of barium impregnated porous tungsten were studied. Cathodes with a modified orifice geometry operated in a low voltage, 'spot' mode over a broad range of discharge current. Thermal degradation tests on cathode heaters showed the flame sprayed SERT II type to be the most durable at high temperatures. Thermal shock was observed to be a significant factor in limiting cathode heater life. A cathode having a barium impregnated porous tungsten tip and a heater which is potted in sintered alumina was found to have favorable operating characteristics.

Zuccaro, D. E.↗

Study of ball bearing torque under elastohydrodynamic lubrication

Spinning and rolling torques were measured in an angular-contact ball bearing with and without a cage under several lubrication regimes in a modified NASA spinning torque apparatus. Two lubricants were used - a di-2 ethylhexyl sebacate and a synthetic paraffinic oil, at shaft speeds of 1000, 2000, and 3000 rpm and bearing loads from 45 newtons (10 lb) to 403 newtons (90 lb). An analytical model was developed from previous spinning friction models to include rolling with spinning under lubrication regimes from thin film to flooded conditions. The bearing torque values have a wide variation, under any condition of speed and load, depending on the amount of lubricant present in the bearing. The analytical model compared favorably with experimental results under several lubrication regimes.

Townsend, D. P.↗

The planet Mars in 1973

Review of several international observation programs of Mars, carried out in 1973 - the last favorable period for Martian observations until the 1980's. The results of the Lowell Observatory International Planetary Patrol Program and of observations by the Association of Lunar and Planetary Observers in France, Japan, Britain and elsewhere are discussed and are shown in diagrams and photographs. Attention is given to the changes in Martian features and to the factors affecting observations adversely.

Capen, C. F.↗

The role of computer networks in remote sensing data analysis

It has been hypothesized that computer networks can be used to make data processing facilities available to the remote sensing community both quickly and effectively. An experiment to test this hypothesis is being conducted by the Laboratory for Applications of Remote Sensing at Purdue University, with the participation of potential users at several remote sites. Initial indications have been highly favorable, although final evaluation awaits further experience and the accumulation of usage data.

Swain, P. H.↗

An orbital radar mapper of Venus in the 1980's - Mission design and analysis

A reasonable approach to the examination of Venus topography, obscured for photographic imaging, is available in the application of airborne radar mapping systems to an orbiter mission about the planet. Extrapolating the improving capabilities of earth-based radar study of Venus into the 1980's suggests that only a non-uniform, poorly resolved surface profile will be possible relative to the potential for 100% coverage at 100 meter resolution with an orbital radar. The intent of this paper is to define mission opportunities favorable for a Venus orbital mapper during the 1980's, to examine orbit design problem associated with mapping radar systems, to establish what flexibility exists for an adaptive mapping strategy, to contribute to the sizing of particular spacecraft systems, to suggest a reference mission design and demonstrate mission feasibility.

Asnin, S. K.↗

Notions of analytic vs numerical stability as applied to the numerical calculation of orbits

This paper deals with the implications of 'stability' as applied to the numerical calculation of orbits. The study was motivated by the recent appearance of several proposed transformations of the classical Newtonian equations of motion which 'analytically stabilize' Cowell's method. This report analyzes the basic properties of such stabilizing transformations and shows the removal of the period as a parameter is the key to these transformations and, that although such transformations do not yield global numerical error bounds, the error propagation properties are more favorable - linear vs quadratic growth.

Velez, C. E.↗

Atmospheric spreading of protons in auroral arcs

A model is developed to calculate the effect of atmospheric spreading on the flux and angular distribution of protons in homogeneous auroral arcs. An expression is derived that indicates the angular distribution in the atmosphere as a function of distance from arc center, neutral scale height, arc width, and initial angular distribution. The results of the model agree favorably with those based on Monte-Carlo calculations. From these results the enhancement factors needed to compute the original proton current above the atmosphere are obtained. A technique is indicated for determining the incident angular distribution from rocket-based measurements of the arc width and angular distribution.

Iglesias, G. E.↗

Cooling histories of lunar rocks based on opaque mineral geothermometers

The application of experimentally derived data on (1) the Zr partitioning between coexisting ilmenite and ulvospinel and (2) the Ti partitioning between coexisting troilite and ilmenite has allowed the discernment of differences in subsolidus cooling histories of lunar rocks - e.g., the Apollo 15 Type I Mare basalts. The rocks which show Zr partitionings reequilibrated to lower temperature (i.e., below 950 C), as a result of slow cooling, also show evidence for subsolidus reduction of ulvospinel to ilmenite + native Fe. It is suggested that the presence of ulvospinel reduction is not evidence a priori that these rocks have undergone more reducing conditions than the other Apollo 15 Mare basalts; it may only indicate that the cooling rates were slower in that subsolidus temperature range (i.e., much less than 900 C) where oxygen fugacity values were favorable for ulvospinel reduction. The rocks with higher temperature Zr partitionings and no ulvospinel reduction may have cooled under the same fugacity conditions but at a faster rate.

Taylor, L. A.↗

Cosmic ray track production rates in lunar materials

A particularly favorable rock from the Apollo 16 mission (68815) has been used to derive an 'empirical track production energy spectrum' suitable for calculating track exposure ages from galactic cosmic rays in lunar materials. The spectrum is a long term average for the last 2m.y. and is independent of assumptions about the detailed nature of track registration in lunar minerals. The spectrum is close to that previously estimated from measurements of contemporary cosmic rays and does not support the recent suggestion that track exposure ages should be revised upwards.

Walker, R.↗

Detailed comparison of type III radio bursts with H alpha activity. II

Isolated type III radio bursts activity was observed at Clark Lake Radio Observatory in March and the first part of April 1971 to occur in discrete regions of the corona above certain active regions. When these regions were examined under high resolution in H alpha all the type III events appeared to have associated activity in H alpha. The potential coronal magnetic field in these regions appeared to be either open or diverging, whereas the field over a rather active region which did not have radio burst activity was closed in a magnetic arcade. The latter feature has been associated with streamers. Streamers have also been associated with dark filaments. The occurrence of a stable dark filament in an active region appeared to have an inhibiting effect on type III activity. It is suggested that a streamer field configuration is not favorable to the escape of isolated type III exciters.

Kuiper, T. B. H.↗