Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Gel electrolyte composite including ionic liquid and zwitterionic polymer scaffold

A gel electrolyte composite containing a nonvolatile electrolyte and a zwitterionic polymer scaffold in which the non-volatile electrolyte is a non-lithium-containing ionic liquid, a sodium-containing ionic liquid, or a lithium-containing ionic liquid and the zwitterionic polymer scaffold is formed from one or more zwitterionic monomers only or both one or more zwitterionic monomers and one or more non-zwitterionic monomers. The zwitterionic polymer scaffold contains 8 mol % or higher of zwitterions relative to the total content of the gel electrolyte composite when the nonvolatile electrolyte is a non-lithium-containing ionic liquid, and contains 1 mol % or higher of zwitterions relative to the total content of the gel electrolyte composite when the nonvolatile electrolyte is a sodium-containing ionic liquid or a lithium-containing ionic liquid. Also disclosed are a method of preparing the above-described gel electrolyte composite and an electrochemical energy storage device containing same.

D'Angelo, Anthony J.↗
DOE OSTI2018

Enhanced Interfacial Stability of Hybrid-Electrolyte Lithium-Sulfur Batteries with a Layer of Multifunctional Polymer with Intrinsic Nanoporosity

We report that the use of lithium-ion conductive solid electrolytes offers a promising approach to address the polysulfide-shuttle and the lithium-dendrite problems in lithium-sulfur (Li-S) batteries. One critical issue with the development of solid-electrolyte Li-S batteries is the electrode-electrolyte interfaces. We present herein a strategic approach by employing a thin layer of a polymer with intrinsic nanoporosity (PIN) on a Li + -ion conductive solid electrolyte, which significantly enhances the ionic interfaces between the electrodes and the solid electrolyte. Among the various types of Li + -ion solid electrolytes, NASICON-type Li 1+x Al x Ti 2-x (PO 4 ) 3 (LATP) offers advantages in terms of Li + -ion conductivity, stability in ambient environment, and practical viability. However, LATP is susceptible to reaction with both the Li-metal anode and polysulfides in Li-S batteries due to the presence of easily reducible Ti 4+ ions in it. The coating with a thin layer of PIN presented in this study overcomes the above issues. At the negative-electrode side, the PIN layer prevents the direct contact of Li-metal with the LATP solid electrolyte, circumventing the reduction of LATP by Li metal. Lastly, at the positive electrode side, the PIN layer prevents the migration of polysulfides to the surface of LATP, preventing the reduction of LATP by polysulfides.

25 ENERGY STORAGE↗
DOE OSTI2023

Stabilizing High–Nickel Cathodes with High–Voltage Electrolytes

Electrolytes connect the two electrodes in a lithium battery by providing Li + transport channels between them. Advanced electrolytes are being explored with high-nickel cathodes and the lithium-metal anode to meet the high energy density and cycle life goals, but the origin of the performance differences with different electrolytes is not fully understood. Here, the mechanisms involved in protecting the high-capacity, cobalt-free cathode LiNiO 2 with a model high-voltage electrolyte (HVE) are delineated. The kinetic barrier posed by a thick surface degradation layer with poor Li + -ion transport is found to be the major contributor to the fast capacity fade of LiNiO 2 with the conventional carbonate electrolyte. In contrast, HVE reduces the side reactions between the electrolyte and the electrodes, leading to a thinner nano-interphase layer comprised of more beneficial species. Crucially, the HVE leads to a different surface reorganization pathway involving the formation of a thinner nanoscale LiNi 2 O 4 spinel phase on the LiNiO 2 surface. Finally, with a high 3D Li + -ion and electronic conductivity, the spinel LiNi 2 O 4 reorganization nanolayer preserves fast Li + transport across the cathode–electrolyte interface, reduces reaction heterogeneity in the electrode and alleviates intergranular cracking within secondary particles, resulting in superior long-term cycle life.

25 ENERGY STORAGE↗
DOE OSTI2025

Insight Into Sulfur‐Containing Additive to Boost Anti‐Oxidation Ability of the Ether‐Based Electrolyte for Sodium‐Ion Full Batteries

Ether-based electrolytes are considered as promising candidates for sodium-ion batteries (SIBs) due to their high ionic conductivity and good compatibility with hard carbon (HC) anode. However, they suffer from poor anti-oxidative ability with unstable cathode electrolyte interface, inducing successive electrolyte decomposition and rapid capacity fading. Herein, the sulfur-containing additive (1,3-propanediol cyclic sulfate, PCS) is introduced to boost the stability of the electrode-electrolyte interface (EEI) in ether-based electrolyte. PCS largely participates in the inner Na + sheath, causing more diglyme (G2) molecules and fewer PF 6 - anions to occupy the inner Na + solvation sheath, avoiding the decomposition of G2 molecules at high operation voltage. Moreover, PCS is beneficial for simultaneously constructing thin and robust sulfur-containing EEI on both Prussian blue (PB) cathode and HC anode, maintaining the structural stability of PB and alleviating the dissolution of transition metals. These enable PB||HC pouch cells to deliver a capacity retention of 60.3% after 400 cycles, significantly higher than the 32.1% in PCS-free electrolytes. In conclusion, this work discloses the underlying mechanism of PCS to evoke the anti-oxidation ability of ether-based electrolyte and provides a promising method for realizing advanced sodium-ion full cells.

anti-oxidation ability↗
DOE OSTI2023

Electrolytes with Solvating Inner Sheath Engineering for Practical Na–S Batteries

Sodium–sulfur (Na–S) batteries with durable Na-metal stability, shuttle-free cyclability, and long lifespan are promising to large-scale energy storages. However, meeting these stringent requirements poses huge challenges with the existing electrolytes. Herein, a localized saturated electrolyte (LSE) is proposed with 2-methyltetrahydrofuran (MeTHF) as an inner sheath solvent, which represents a new category of electrolyte for Na–S system. Unlike the traditional high concentration electrolytes, the LSE is realized with a low salt-to-solvent ratio and low diluent-to-solvent ratio, which pushes the limit of localized high concentration electrolyte (LHCE). The appropriate molecular structure and solvation ability of MeTHF regulate a saturated inner sheath, which features a reinforced coordination of Na + to anions, enlarged Na + -solvent distance, and weakened anion-diluent interaction. Such electrolyte configuration is found to be the key to build a sustainable interphase and a quasi-solid–solid sulfur redox process, making a dendrite-inhibited and shuttle-free Na–S battery possible. With this electrolyte, pouch cells with decent cycling performance under rather demanding conditions are demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2023

Designing Electrolytes With Controlled Solvation Structure for Fast‐Charging Lithium‐Ion Batteries

Recharging battery-powered electric vehicles (EVs) in a similar timeframe as those used for refueling gas-powered internal combustion vehicles is highly desirable for rapid penetration of the EV market. It is well known that the electrolyte in a battery plays a critical role in fast-charging capability of the battery because it determines the rate of ion transport together with its derived electrode/electrolyte interphases on both cathode and anode of the battery. In this study, the effects of contents of salt, coordinating solvent, and noncoordinating diluent on salt dissociation degree and electrolyte ionic conductivity are investigated, and a controlled solvation structure electrolyte is developed to improve the lithium ion mobility and conductivity in the electrolyte and to enhance the kinetics and stability of the electrode/electrolyte interphases in the battery. This electrolyte enables fast-charging capability of high energy density lithium-ion batteries (LIBs) at up to 5 C rate (12-min charging), which significantly outperforms the state-of-the-art electrolyte. The controlled solvation structure sheds light on the future electrolyte design for fast-charging LIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Novel Low-Temperature Electrolyte Using Isoxazole as the Main Solvent for Lithium-Ion Batteries

A novel electrolyte system with an excellent low temperature performance for lithium-ion batteries (LIBs) has been developed and studied. It was discovered for the first time, in this work, that when isoxazole (IZ) was used as the main solvent, the ionic conductivity of the electrolyte for LIBs is more than doubled in a temperature range between -20 and 20 °C compared to the baseline electrolyte using ethylene carbonate–ethyl methyl carbonate as solvents. To solve the problem of solvent cointercalation into the graphite anode and/or electrolyte decomposition, the lithium difluoro(oxalato)borate (LiDFOB) salt and fluoroethylene carbonate (FEC) additive were used to form a stable solid electrolyte interphase on the surface of the graphite anode. Benefitting from the high ionic conductivity at low temperature, cells using a new electrolyte with 1 M LiDFOB in FEC/IZ (1:10, vol %) solvents demonstrated a very high reversible capacity of 187.5 mAh g -1 at -20 °C, while the baseline electrolyte only delivered a reversible capacity of 23.1 mAh g -1 .

25 ENERGY STORAGE↗
DOE OSTI2022

Mechanistic Study of Controlled Zinc Electrodeposition Behaviors Facilitated by Nanoscale Electrolyte Additives at the Electrode Interface

Nanoparticle organic hybrid materials (NOHMs) are liquid-like materials composed of an inorganic core to which a polymeric canopy is ionically tethered. NOHMs have unique properties including negligible vapor pressure, high oxidative thermal stability, and the ability to bind to reactive species of interest due to the tunability of their polymeric canopy. This makes them promising multifunctional materials for a wide range of energy and environmental technologies, including electrolyte additives for electrochemical energy storage (e.g., flow batteries) and the electrochemical conversion of CO 2 to chemicals and fuels. Due to their unique transport behaviors in fluid systems, an understanding of the near-electrode surface behavior of NOHMs in electrolyte solutions and their effect on electrochemical reactions is still lacking. In this work, the complexation of zinc (Zn) by NOHMs with an ionically tethered polyetheramine canopy (HPE) (NOHM-I-HPE) was studied using attenuated total reflectance Fourier transform infrared and Carbon-13 nuclear magnetic resonance spectroscopy. Additionally, various electrochemical techniques were employed to discern the role of NOHM-I-HPE during zinc electrodeposition, and the results were compared to those of the electrochemical system containing untethered HPE polymers. Our findings confirmed that NOHM-I-HPE and HPE reversibly complex zinc in the aqueous electrolyte. NOHM-I-HPE and HPE were found to block some of the electrode active sites, reducing the overall current density during electrodeposition, while facilitating the formation of smooth zinc deposits, as revealed by surface imaging and diffraction techniques. Observed variations in the current density responses and the degree of passivation created by the NOHM-I-HPE and HPE adsorbed on the electrode surface revealed that their different packing behaviors at the electrode–electrolyte interface influence the zinc deposition mechanism. The presence of the nanoparticle and ordering offered by the NOHMs as well as the structured conformation of the polymeric canopy allowed the formation of void spaces and free volumes for enhanced transport behaviors. Furthermore, these findings provided insights into how structured electrolyte additives such as NOHMs can allow for advancements in electrolyte design for controlled deposition of metal species from energy-dense electrolytes or for other electrochemical reactions.

25 ENERGY STORAGE↗
DOE OSTI2022

Exploring the Promise of Multifunctional “Zintl-Phase-Forming” Electrolytes for Si-Based Full Cells

Li-M-Si ternary Zintl phases have gained attention recently due to their high structural stability, which can improve the cycling stability compared to a bulk Si electrode. Adding multivalent cation salts (such as Mg 2+ and Ca 2+ ) in the electrolyte was proven to be a simple way to form Li-M-Si ternary phases in situ in Si-based Li-ion cells. To explore the promise of Zintl-phaseforming electrolytes, we systematically investigated their application in pouch cells via electrochemical and multiscale postmortem analysis. The introduction of multivalent cations, such as Mg 2+ , during charging can form Li x M y Si ternary phases. They can stabilize Si anions and reduce side reactions with electrolyte, improving the bulk stability. More importantly, Mg 2+ and Ca 2+ incorporate into interfacial side reactions and generate inorganic-rich solid- electrolyte interphase, thus enhancing the interfacial stability. Therefore, the full cells with Zintl-phase-forming electrolytes achieve higher capacity retentions at the C/3 rate after 100 cycles, compared to a baseline electrolyte. Additionally, strategies for mitigating the electrode-level fractures of Si were evaluated to make the best use of Zintl-phase-forming electrolytes. In conclusion, this work highlights the significance of synergistic impact of multifunctional additives to stabilize both bulk and interface chemistry in high-energy Si anode materials for Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Membrane–Electrolyte System Approach to Understanding Ionic Conductivity and Crossover in Alkaline Flow Cells

Membrane transport properties are crucial for electrochemical devices, and these properties are influenced by the composition and concentration of the electrolyte in contact with the membrane. We apply this general membrane-electrolyte system approach to alkaline flow batteries, studying conductivity and ferricyanide crossover of Nafion and E-620. We report undetectable crossover for as-received Nafion and E-620 after both sodium and potassium exchange, but high ferricyanide permeability of 10 –7 to 10 –8 cm2 s –1 for Nafion subjected to pre-treatment prevalent in the flow battery literature. We show how the electrolyte mass fraction in hydrated membranes regulates the influence of ion concentration on membrane conductivity, identifying that increasing electrolyte concentration may not increase 1 membrane conductivity even when it increases electrolyte conductivity. To illustrate this behavior we introduce a new metric, the membrane penalty, as the ratio of the conductivity of the electrolyte to that of the membrane equilibrated with the electrolyte. We discuss the tradeoff between flow battery volumetric capacity and areal power density that arises from these findings. Finally, we apply insights from this approach to provide recommendations for use of membranes in alkaline flow cells, and electrochemical reactors in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Optimized Electrolyte with High Electrochemical Stability and Oxygen Solubility for Lithium–Oxygen and Lithium–Air Batteries

Lithium-oxygen (Li-O2) batteries with high reversibility require a stable electrolyte against the side reactions with Li metal anode and reactive oxygen species. Moreover, an electrolyte which can effectively utilize the low partial pressure of oxygen in atmosphere has significance effect on the practical application lithium-air batteries. In this study, we developed a localized high concentration electrolyte (LHCE) using 1H,1H,5H-Octafluoropentyl 1,1,2,2-tetrafluoroethyl ether (OTE) as a diluent, which satisfies all these conditions at the same time. The OTE-based LHCE exhibits much improved electrochemical performances in Li-O2 batteries and Li-air batteries compared to the conventional electrolyte and high concentration electrolyte. The design principle of this novel electrolyte also provides an important guideline and reference for future researches of electrolytes in Li-O2 and Li-air batteries.

lithium air batteries, Localized high concentratio↗
DOE OSTI2021

Effects of Plasticizer Content and Ceramic Addition on Electrochemical Properties of Cross-Linked Polymer Electrolyte

The development of a safe electrolyte is the key to improving energy density for next generation lithium batteries. In this work, UV-crosslinked poly(ethylene oxide) (PEO) -based polymer and composite electrolytes are systematically investigated on their ionic conductivity, mechanical and electrochemical properties. The polymer electrolytes are plasticized with non-flammable linear short-chain PEO. In the composite electrolytes, a doped lithium aluminum titanium phosphate (LATP) ceramic, LICGC™, is used as the ceramic filler. It is found that the addition of the plasticizer leads to a tradeoff between ion transport and mechanical properties. In contrast, the addition of ceramic fillers improves both the ionic conductivity and mechanical properties. The sample with 20 wt% of LICGC™ shows a conductivity of ~0.6 mS cm –1 at 50 °C. This sample also demonstrates much longer cycle life than the neat polymer electrolyte in Li platting/stripping test with a capacity of 1 mAh cm –2 . Further, a full cell made with this composite electrolyte against Li metal anode and high voltage LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode shows 94% capacity retention after 30 cycles, compared to 58% capacity retention with the neat polymer electrolyte. These results demonstrate that a hybrid of polymer/ceramic/non-flammable plasticizer is a promising path to high energy density, high voltage lithium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Designing Moderately‐Solvating Electrolytes for High‐Performance Lithium–Sulfur Batteries

New electrolytes are critical for high‐energy lithium (Li)–sulfur (S) batteries (LSBs) to ensure their stability against Li metal anode and polysulfides (PSs) shuttling which hinder the large‐scale application of LSBs. In this study, the design principle of moderately solvating electrolytes (MSEs) for LSBs is demonstrated by using a multiple‐solvent system comprising of a highly solvating solvent, a weakly solvating solvent, and a non‐solvating solvent to create a well‐balanced electrolyte system. This resulting electrolyte significantly improves the cycle life of LSBs, achieving 300 cycles, which is twice as long as that of similar cells with the conventional electrolyte and it also ensures stable calendar life for at least seven months. The optimal MSE forms robust passivation layers enhancing the structural integrity of both S and Li metal electrodes after cycling. These virtues effectively hinder parasitic side reactions and self‐discharge behavior of LSBs. This electrolyte design principle is versatile and can be applied to other battery chemistries, providing a potential path toward the development of a more efficient and stable battery system. By addressing key challenges such as the instability of electrodes and shuttling of polysulfides, this electrolyte approach offers promising solutions for advancing LSB technology.

25 ENERGY STORAGE↗
DOE OSTI2020

Recent Progress in High Donor Electrolytes for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries continue to be considered promising post-lithium-ion batteries owing to their high theoretical energy density. In pursuit of a Li–S cell with long-term cyclability, most studies thus far have relied on using ether-based electrolytes. However, their limited ability to dissolve polysulfides requires a high electrolyte-to-sulfur ratio, which impairs the achievable specific energy. Recently, the battery community found high donor electrolytes to be a potential solution to this shortcoming because their high solubility toward polysulfides enables a cell to operate under lean electrolyte conditions. Despite the increasing number of promising outcomes with high donor electrolytes, a critical hurdle related to stability of the lithium-metal counter electrode needs to be overcome. This review provides an overview of recent efforts pertaining to high donor electrolytes in Li–S batteries and is intended to raise interest from within the community. Furthermore, based on analogous efforts in the lithium-air battery field, strategies for protecting the lithium metal electrode are proposed. In this review, it is predicted that high donor electrolytes will be elevated to a higher status in the field of Li–S batteries, with the hope that either existing or upcoming strategies will, to a fair extent, mitigate the degradation of the lithium–metal interface.

25 ENERGY STORAGE↗
DOE OSTI2017

A Plastic-Crystal Electrolyte Interphase for All-Solid-State Sodium Batteries

The development of all-solid-state rechargeable batteries is plagued by a large interfacial resistance between a solid cathode and a solid electrolyte that increases with each charge–discharge cycle. The introduction of a plastic–crystal electrolyte interphase between a solid electrolyte and solid cathode particles reduces the interfacial resistance, increases the cycle life, and allows a high rate performance. In this work, comparison of solid-state sodium cells with 1) solid electrolyte Na 3 Zr 2 (Si 2 PO 4 ) particles versus 2) plastic–crystal electrolyte in the cathode composites shows that the former suffers from a huge irreversible capacity loss on cycling whereas the latter exhibits a dramatically improved electrochemical performance with retention of capacity for over 100 cycles and cycling at 5 C rate. The application of a plastic–crystal electrolyte interphase between a solid electrolyte and a solid cathode may be extended to other all-solid-state battery cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Making Plasticized Polymer Electrolytes Stable Against Sodium Metal for High‐Energy Solid‐State Sodium Batteries

Solid polymer electrolytes based on plastic crystals are promising for solid-state sodium metal (Na 0 ) batteries, yet their practicality has been hindered by the notorious Na 0 -electrolyte interface instability issue, the underlying cause of which remains poorly understood. Here, in this study, by leveraging a model plasticized polymer electrolyte based on conventional succinonitrile plastic crystals, we uncover its failure origin in Na 0 batteries is associated with the formation of a thick and non-uniform solid electrolyte interphase (SEI) and whiskery Na 0 nucleation/growth. Furthermore, we design a new additive-embedded plasticized polymer electrolyte to manipulate the Na 0 deposition and SEI formulation. For the first time, we demonstrate that introducing fluoroethylene carbonate (FEC) additive into the succinonitrile-plasticized polymer electrolyte can effectively protect Na 0 against interfacial corrosion by facilitating the growth of dome-like Na 0 with thin, amorphous, and fluorine-rich SEIs, thus enabling significantly improved performances of Na//Na symmetric cells (1,800 h at 0.5 mA cm −2 ) and Na//Na 3 V 2 (PO 4 ) 3 full cells (93.0 % capacity retention after 1,200 cycles at 1 C rate in coin cells and 93.1 % capacity retention after 250 cycles at C/3 in pouch cells at room temperature). Our work provides valuable insights into the interfacial failure of plasticized polymer electrolytes and offers a promising solution to resolving the interfacial instability issue.

25 ENERGY STORAGE↗
DOE OSTI2020

On electrolyte wetting through lithium-ion battery separators

The wettability by electrolyte is a critical characteristic of lithium-ion battery separators since electrolyte absorption is essential for ionic transport. Most importantly, fast absorption of electrolyte facilitates the electrolyte filling and wetting processes during the battery assembly. However, theoretical or experimental investigation of separator wettability has rarely been reported, and thus very little quantitative data can be found in the existing literature. Here, innovative experimental techniques and associated analytical models have been developed to fully characterize the electrolyte wetting behavior through battery separators. Both in-plane and through-plane imbibition processes are investigated. The results show that, electrolyte needs significantly longer time to wet separators than it does for commercial electrodes. The wetting rate depends significantly on the pore size, porosity, and micro-structure of the separators. Electrolyte in-plane wetting is only observed in the separators manufactured by the wet process. Increasing separator porosity and pore size is shown to be substantially increasing through-plane wetting rate. In addition, ceramic coating is shown to increase in-plane wetting but retard through-plane wetting.

25 ENERGY STORAGE↗
DOE OSTI2019

Progress in development of electrolytes for magnesium batteries

Over the last few years, there has been an increased interest in developing safe, next-generation battery systems that offer energy densities higher than those of lithium-based batteries. In this context, batteries based on multivalent-ions (Mg 2+ , Zn 2+ , Ca 2+ , and Al 3+ ) have developed their own niche with their capability to achieve at least twice the energy density of monovalent-ion systems such as Li-ion and Na-ion batteries. Among the multivalent-ion battery candidates, magnesium (Mg) batteries appear to be the most viable choice to eventually replace the Li-ion technology because of the high electrode potential, superior safety, and high abundance of Mg-metal. However, the limited development in electrolytes and cathodes has prevented their commercialization to date. There is a lack of suitable electrolytes that can be used at high voltages required for Mg 2+ insertion into cathode hosts. The limited compatibility of organic electrolytes with Mg-metal anode is also a challenge, which requires extensive studies of the metal/electrolyte interactions. Such studies over the last two decades were critical in developing state-of-the-art Mg electrolytes that possess voltage windows of >4.0 V and simultaneously be compatible with Mg-metal anodes. Here, we present a review on the development of Mg battery electrolytes, challenges that impede their performance, and promising strategies that have been adopted to address them. As a result, we believe that this comprehensive review covering all three categories of Mg electrolytes (liquids, polymers, and solids) would enable researchers to get a quick grasp of the prevailing challenges, and consequently motivate them to develop novel electrolyte candidates.

25 ENERGY STORAGE↗