Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Vortex shedding experiment with flat and curved bluff plates in water

Vortex shedding experiments were conducted in a water flow facility in order to simulate the strong discrete 4000-Hz vibration detected in the Space Shuttle Main Engine (SSME) which is thought to be associated with the SSME LOX inlet tee splitter vanes on the Main Injector. For the case of a flat vane with a blunt trailing edge excited by flow induced vortex shedding, lock-in with the first bending mode of the plate was observed. A curved vane displayed similar behavior, with the lock-in being a more discrete higher amplitude response. Aluminum vanes were employed to decouple the first vane bending mode from the vortex shedding mode. The application of an asymmetric 30-deg trailing edge bevel to both the flat and curved vanes was found to greatly reduce the strength of the shed vortices.

Reed, D.↗
NASA NTRS1992

A VLBI search for AGN radio cores in starburst galaxies

Results are presented of Mk III 18-cm VLBI observations of a small sample of IR-bright galaxies: four starburst galaxies which have no evidence of an AGN from the optical spectrum, two Seyfert 2 galaxies, and one previously unclassified Markarian galaxies. In Mrk 297 the compact radio source lies in an obscure clump near the edge of the galaxy. This is either the first known case of a detached nucleus (presumably as a result of disruption during a merger) or a radio supernova of unprecedented luminosity. No VLBI-scale emission was detected in the nucleus of the starburst galaxy Mrk 201 or in Mrk 928a, although the Seyfert 2 nucleus Mrk 928b was detected. Mrk 620 was found to have a milliarcsecond core, but Mrk 520 was not detected. Optical spectroscopy was obtained for five galaxies, including Mrk 520. It is demonstrated that, in luminous starburst galaxies, an active nucleus can effectively be completely hidden from view in the optical by dust. The results also support a physical or causal connection between classical nuclear activity and the starburst phenomenon.

Lonsdale, Colin J.↗
NASA NTRS2000

High Resolution VLBA Observations of NGC 4261

The VLBA's high angular resolution at 22 and 43 GHz allows the nuclei of nearby radio galaxies to be imaged with very high linear resolution (a few hundred Schwarzschild radii or less for central black hole masses of about 10(exp 8) - 10(exp 9) solar mass). This is the scale on which absorption by the dense ionized inner regions of nuclear accretion disk should be detected. We present 8, 22, and 43 GHz VLBA images of the two-sided radio jets in NGC 4261 (2C370) with sub-parsec resolution, and derive constraints on the physical properties of the inner accretion disk. In addition, preliminary results from multi-epoch VLBA observations to detect proper motions in the jet and counterjet, and thus determine the orientation of the radio axis to our line of sight, may be available. Our multi-frequency images show apparent absorption by a nearly edge-on disk at 8 GHz, but not evidence for absorption at 22 or 43 GHz. Assuming that this is due to a lower optical depth for free-free absorption at 22 and 43 GHz, we find an upper limit for the electron density of approximately 10(exp 8)* Square root of(0.1/L)/cubic cm, where L is the path length through the disk in pc. The disk inclination, and therefore the likely path length, will be better determined by the ongoing VLBA proper motions measurements. This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

Jones, D. L.↗
NASA NTRS2016

UAV Research at NASA Langley: Towards Safe, Reliable, and Autonomous Operations

Unmanned Aerial Vehicles (UAV) are fundamental components in several aspects of research at NASA Langley, such as flight dynamics, mission-driven airframe design, airspace integration demonstrations, atmospheric science projects, and more. In particular, NASA Langley Research Center (Langley) is using UAVs to develop and demonstrate innovative capabilities that meet the autonomy and robotics challenges that are anticipated in science, space exploration, and aeronautics. These capabilities will enable new NASA missions such as asteroid rendezvous and retrieval (ARRM), Mars exploration, in-situ resource utilization (ISRU), pollution measurements in historically inaccessible areas, and the integration of UAVs into our everyday lives all missions of increasing complexity, distance, pace, and/or accessibility. Building on decades of NASA experience and success in the design, fabrication, and integration of robust and reliable automated systems for space and aeronautics, Langley Autonomy Incubator seeks to bridge the gap between automation and autonomy by enabling safe autonomous operations via onboard sensing and perception systems in both data-rich and data-deprived environments. The Autonomy Incubator is focused on the challenge of mobility and manipulation in dynamic and unstructured environments by integrating technologies such as computer vision, visual odometry, real-time mapping, path planning, object detection and avoidance, object classification, adaptive control, sensor fusion, machine learning, and natural human-machine teaming. These technologies are implemented in an architectural framework developed in-house for easy integration and interoperability of cutting-edge hardware and software.

Davila, Carlos G.↗
NASA NTRS1982

The clouds of Mars as seen by Viking

UV and IR observations of Martian cloud activity by Viking orbiters are reviewed. Localized spiral storms were detected at high northern latitudes during the summer, and both dust and water ice have been associated with the occurrences. Local dust storms formed in spring and summer in the southern hemisphere, and storms along the polar cap edge moved away from the ice covered area on thermally driven downslope winds originating from local variations in thermal inertia. Global dust storms happen nominally during the perihelion of the Martian orbit, although deviations from the pattern have been observed. Condensate clouds were most noticeable around the north polar hood and the Tharsis-Valles Marineris region, with most activity in the spring and summer. Wind speeds were 40 and 85 m/sec in the lower and upper layers of the atmosphere, respectively, with waves having wavelengths from 2-60 km and extending over hundreds of km.

James, P. B.↗
NASA NTRS1985

IUE observations of Beta Pictoris - An IRAS candidate for a proto-planetary system

The results of a preliminary analysis of high-resolution and low-resolution UV spectra of the edge-on extended-disk shell star Beta Pic, obtained with the IUE SWP and LWR instruments on November 5-6, 1984, are reported and compared with IRAS and ground-based observations. No selective UV extinction is detected, and the fine structure of the Fe II and C I absorption lines and the presence of metastable Fe II lines are considered consistent with a circumstellar nebula or extended envelope of density greater than 1000/cu cm and electron density (1-10) x 10 to the 8th/cu cm or less at 1-2 AU from the central star. The possibility that the extended orbiting disk is clumpy, as observed by Smith and Terrile (1985), is discussed.

Kondo, Y.↗
NASA NTRS1989

Light scattering by randomly oriented crystals

The scattering phase function and the degree of linear polarization for small crystals oriented randomly in space have been computed using the geometric ray tracing theory and assuming that the crystals are homogeneous and isotropic. Calculations have been carried out for the main crystal geometries. Detection of halos from crystals other than hexagonal water ice is briefly discussed. The crystal size and shape parameters have also been averaged over some simple distributions in order to examine general light scattering properties of sharp-edged particles. A scalar physical optics correction has been developed for the geometric optics phase functions. Results can be applied to light scattering from regoliths and planetary rings, and possibly also to atmospheric halos. Retroreflecting crystals in the regolith would cause an opposition spike, a phenomenon observed for many bright satellites.

Muinonen, Karri↗
NASA NTRS1997

The Nature of the Optical "Jets" in the Spiral Galaxy NGC 1097

We present new observations of the jet features in the barred spiral galaxy NGC 1097, including optical spectroscopy of the brightest jet features, two-color optical imagery, new VLA mapping at 327 MHz, and archival 1.4 GHz VLA data reprocessed for improved sensitivity. No optical emission lines appear to an equivalent width limit of 15-30 A (depending on the line wavelength). The jets are uniformly blue, with B - V = 0.45 for the two well-observed jets R1 and R2. No radio emission from the jets is detected at either frequency; the 327-MHz data set particularly stringent limits on "fossil" emission from aging synchrotron electrons. The morphology of the jets is shown to be inconsistent with any conical distribution of emission enhanced by edge-brightening; their combination of transverse profile and relative narrowness cannot be reproduced with cone models. The optical colors, lack of radio emission, and morphology of the features lead us to conclude that they are tidal manifestations, perhaps produced by multiple encounters of the small elliptical companion NGC 1097A with the disk of NGC 1097. We present photometric and morphological comparisons to the tail of NGC 465 1, which is similar in scale and morphology to the northeast "dogleg" feature R1 in NGC 1097.

Wehrle, Ann E.↗
NASA NTRS1999

Carbon Fiber Reinforced/Silicon Carbide Turbine Blisk Testing in the SIMPLEX Turbopump

A program designed to implement a ceramic matrix composite integrally bladed disk (blisk) into rocket engine style turbomachinery has successfully completed testing. The Marshall Space Flight Center (MSFC) program, utilizing the MSFC turbomachinery design, analysis, and testing capabilities along with materials development capabilities from both Glenn Research Center (GRC) and MSFC, has tested two carbon fiber reinforced silicon carbide blisks in the Simplex Turbopump at MSFC's Test Stand 500. One blisk contained a polar woven fiber preform, while the second blisk tested utilized a quasi-isotropic preform. Vhile earlier papers have chronicled the program's design, material testing, and torque testing efforts, this paper focuses on the testing of the blisks in the Simplex turbopump. Emphasis will be placed on the actual condition of the blisks before and after the testing test program design methodology, and conclusions that can be drawn from the test data and blisk final conditions. The program performed three separate test series. The first series was needed to validate that the Simplex turbopump was correctly re-built following a major incident to the turbopump. The turbopump had two major differences from the original design. The most obvious difference was the sleeve required throughout the bore of the main housing. The second major difference was modifications to the pump diffuser to improve performance. Several areas were burnt during the incident and were either repaired by weld repair (pump inlet housing) or simply smoothed out (turbine nozzle discharge). The test series was designed to weed out any turbopump design and manufacturing flaws or fatigue issues prior to putting the C/SiC blisks into it. The second and third series were the C/SiC blisk test series. The primary goal of these series was to expose the blisks to as much fatigue causing dynamic stress as possible to examine the material's capability. Initially, the test plan was to put equal time on the two blisks, however, as the test series progressed, the funding allowed additional testing to occur. The additional test time was placed on the polar weave blisk. The total test time accrued on the polar blisk was 2550 seconds with 860 seconds near the turbopump design speed of 25,000 rpm. This testing included 6 tests / 775 seconds pumping liquid nitrogen and 7 tests / 1775 seconds pumping liquid oxygen. The drive gas for all of the tests was gaseous nitrogen due to the lack of hot gas source for the Simplex turbopump. The quasi-isotropic blisk was tested for XX total tests and XXXX seconds with X tests/XXXX seconds pumping liquid nitrogen and X tests/XXXX seconds pumping liquid \oxygen.During the test series, the blisks were inspected following each test. Inspections initially were viewed from the downstream side of the blisks only. Midway through the testing, a method of borescoping the leading edges of the blades was devised, and subsequently, both sides of the blades were inspected following each test. The leading and trailing edges of the polar blisk held up better than the quasi-isotropic blisk. This was a known possibility due to the varying fiber direction in the blades as the rectangular preform weave is cut in a circular pattern. The surprising fact about the testing was that there was no measurable performance loss due to the inaccuracies in the blade manufacturing in the C/SiC blisks, the surface roughness C/SiC of the blades, or the loss of the material in the polar blisk. A performance shift was seen in the quasi-isotropic blisk as portions of the leading and trailing edges were lost. After the testing was completed, detailed inspections of the blisks were performed. The largest surprise was the polar blisk had a obvious crack in a single blade that was located nearly midspan which was not detected in test. The crack ran completely through the blade circumferenciary and through the radial length of the blade. However, the crack does not appear to extend into the blisk hub. Although the cause of the crack is still under investigation, the material appears to be tolerant of this crack, and other hairline cracks discovered under higher magnification. This bodies well for eventual use of this material in actual flight turbopumps where monolithic fracture toughness issues limit its use.

Genge, Gary G.↗
NASA NTRS2002

Clinostat rotation induces apoptosis in luteal cells of the pregnant rat

Recent studies have shown that microgravity induces changes at the cellular level, including apoptosis. However, it is unknown whether microgravity affects luteal cell function. This study was performed to assess whether microgravity conditions generated by clinostat rotation induce apoptosis and affect steroidogenesis by luteal cells. Luteal cells isolated from the corpora lutea of Day 8 pregnant rats were placed in equal numbers in slide flasks (chamber slides). One slide flask was placed in the clinostat and the other served as a stationary control. At 48 h in the clinostat, whereas the levels of progesterone and total cellular protein decreased, the number of shrunken cells increased. To determine whether apoptosis occurred in shrunken cells, Comet and TUNEL assays were performed. At 48 h, the percentage of apoptotic cells in the clinostat increased compared with that in the control. To investigate how the microgravity conditions induce apoptosis, the active mitochondria in luteal cells were detected with JC-1 dye. Cells in the control consisted of many active mitochondria, which were evenly distributed throughout the cell. In contrast, cells in the clinostat displayed fewer active mitochondria, which were distributed either to the outer edge of the cell or around the nucleus. These results suggest that mitochondrial dysfunction induced by clinostat rotation could lead to apoptosis in luteal cells and suppression of progesterone production.

NASA Discipline Cell Biology↗
NASA NTRS2011

Development of a Real-Time Pulse Processing Algorithm for TES-Based X-Ray Microcalorimeters

We report here a real-time pulse processing algorithm for superconducting transition-edge sensor (TES) based x-ray microcalorimeters. TES-based. microca1orimeters offer ultra-high energy resolutions, but the small volume of each pixel requires that large arrays of identical microcalorimeter pixe1s be built to achieve sufficient detection efficiency. That in turn requires as much pulse processing as possible must be performed at the front end of readout electronics to avoid transferring large amounts of data to a host computer for post-processing. Therefore, a real-time pulse processing algorithm that not only can be implemented in the readout electronics but also achieve satisfactory energy resolutions is desired. We have developed an algorithm that can be easily implemented. in hardware. We then tested the algorithm offline using several data sets acquired with an 8 x 8 Goddard TES x-ray calorimeter array and 2x16 NIST time-division SQUID multiplexer. We obtained an average energy resolution of close to 3.0 eV at 6 keV for the multiplexed pixels while preserving over 99% of the events in the data sets.

Tan, Hui↗
NASA NTRS1976

An Experiment to Evaluate Skylab Earth Resources Sensors for Detection of the Gulf Stream

The author has identified the following significant results. An experiment to evaluate the Skylab earth resources package for observing ocean currents was performed in the Straits of Florida in January 1974. Data from the S190 photographic facility, S191 spectroradiometer and S192 multispectral scanner, were compared with surface observations. The anticyclonic edge of the Gulf Stream could be identified in the Skylab S190A and B photographs, but the cyclonic edge was obscured by clouds. The aircraft photographs were judged not useful for spectral analysis because vignetting caused the blue/green ratios to be dependent on the position in the photograph. The spectral measurement technique could not identify the anticyclonic front, but mass of Florida Bay water which was in the process of flowing into the Straits could be identified and classified. Monte Carlo simulations of the visible spectrum showed that the aerosol concentration could be estimated and a correction technique was devised.

Maul, G. A.↗
NASA NTRS2007

Cutting Edge RFID Technologies for NASA Applications

This viewgraph document reviews the use of Radio-frequency identification (RFID) for NASA applications. Some of the uses reviewed are: inventory management in space; potential RFID uses in a remote human outpost; Ultra-Wideband RFID for tracking; Passive, wireless sensors in NASA applications such as Micrometeoroid impact detection and Sensor measurements in environmental facilities; E-textiles for wireless and RFID.

Fink, Patrick W.↗
NASA NTRS1998

Transit of Extrasolar Planets

During the past five years we have pursued the detection of extrasolar planets by the photometric transit method, i.e. the detection of a planet by watching for a drop in the brightness of the light as it crosses in front of a star. The planetary orbit must cross the line-of-sight and so most systems will not be lined up for such a transit to ever occur. However, we have looked at eclipsing binary systems which are already edge-on. Such systems must be very small in size as this makes the differential light change due to a transit much greater for a given planet size (the brightness difference will be proportional to the area of the transiting planet to the disc area of the star). Also, the planet forming region should be closer to the star as small stars are generally less luminous (that is, if the same thermal regime for planet formation applies as in the solar system). This led to studies of the habitable zone around other stars, as well. Finally, we discovered that our data could be used to detect giant planets without transits as we had been carefully timing the eclipses of the stars (using a GPS antenna for time) and this will drift by being offset by any giant planets orbiting around the system, as well. The best summary of our work may be to just summarize the 21 refereed papers produced during the time of this grant. This will be done is chronological order and in each section separately.

Doyle, Laurance R.↗
NASA NTRS1972

Remote sensing of ocean currents

The author has identified the following significant results. Monthly field experiments in support of the NOAA investigation of ocean color boundary determination using ERTS data have been conducted since June 1972. The color boundary between the Loop Current and coastal water has been detected by airborne cameras with ERTS type bandpass filters, at altitudes of 7300 meters. Ship and aircraft data hint that the boundary may be enhanced due to increased phytoplankton populations caused by convergence of the surface waters. The term edge effect has been coined to describe this phenomenon.

Maul, G. A.↗
NASA NTRS1990

Nova LMC 1990 no. 1: The first extragalactic neon nova

International Ultraviolet Explorer (IUE) observations of nova LMC (Large Magellanic Cloud) 1990 No. 1, the first neon (or ONeMg) nova observed outside the Galaxy are presented. The observations were obtained from 17 Jan. to Mar. 1990, with especially dense coverage during the first 25 days of the outburst. (The neon nova categorization is based on the detection of forbidden Ne 3-4 lines in optical spectra; the ultraviolet neon lines were not detected.) During the first 30 days of the outburst, the radiative losses were dominated by the N 5 delta 1240 and C 4 delta 1550 lines. The maximum ejection velocity was approximately 8000 km/s, based on the blue absorption edge of the C 4 P-Cygni profile. Early in the outburst of Nova LMC 1990 No. 1 the UV luminosity alone was approximately 3 times 10 to the 38th power erg/sec, implying that the bolometric luminosity was well in excess of the Eddington luminosity for a one solar mass object.

Sonneborn, George↗
NASA NTRS1993

Charged particle activation studies on the surface of LDEF spacecraft

High energy proton induced nuclear reaction products are examined using seven elements, namely, Aluminum, Silicon, Nickel, Copper, Zirconium, Tantalum, and Tungsten. The samples were in the form of plates, 2 x 2 x 1/8 inches. Activities due to Na-22 from Al, Co-56 and Co-57 from Ni, Co-58 from Cu, and Y-88 from Zr targets were detected. No induced activity was observed in Si, Ta, and W, most probably due to the long cooling times. Only the Zr sample contained a weak Be-7 peak, although Ta and W were also located at the leading edge of the spacecraft. Gamma-rays of individual isotopes were measured using high-resolution Ge(Li) solid state detector coupled to 4096-multichannel analyzer. Activities were calculated for Co-56 (846 keV) and Co-57 (122 and 136 keV's) at the time of the entry of the spacecraft and found to be 0.014 plus or minus 0.005 c/sec. g, 0.018 plus or minus 0.002 c/sec. g, and 0.0024 plus or minus 0.0007 c/sec. g, respectively.

Olmez, Ilhan↗
NASA NTRSDate not supplied

Machine Learning Algorithms for Aerosol and Cloud Detection Using CATS on the ISS

Clouds and aerosols are one of the largest uncertainties in understanding and forecasting the Earth’s changing climate system. The type and height of aerosols are important factors in determining the top-of-atmosphere (TOA) radiation budget, either direct reflection of solar radiation back to space and/or absorption of solar radiation. In addition to their impact on the Earth’s climate system, aerosols near the surface from wildfires, man-made pollution events, and dust storms are hazardous to human health. The phase and height of clouds also play a critical role in determining the role of clouds in the Earth’s climate system. Cirrus clouds in the upper troposphere can induce a significant daytime TOA warming effect, while liquid water clouds near the surface cause a large corresponding cooling effect. Lidar measurements provide accurate vertically resolved information about clouds and aerosols, including complex multi-layer scenes where passive sensors are challenged and at night, when passive sensors are unable to measure cloud and aerosol properties. The Cloud-Aerosol Transport System (CATS) is a lidar instrument that operated for 33 months on the International Space Station (ISS) at the 1064 nm wavelength to measure attenuated total backscatter and depolarization ratio. These fundamental measurements are used to derive “vertical feature mask” cloud and aerosol products, including layer top/base heights, layer geometrical thickness, aerosol type, and cloud phase. While space-based lidar systems like CATS provide cloud and aerosol vertical distributions that improve our understanding of the climate system, averaging of the daytime data from these sensors is required, at the expense of spatial resolution, to improve the daytime signal-to noise (SNR) and thus atmospheric layer detection. This presentation shows results from machine learning (ML) techniques that, when applied to CATS data: 1. improve the 1064 nm SNR 2. enable detection of atmospheric features during daytime with a horizontal resolution of 350 m or 5 km (compared to the 60 km required for standard CATS data products) 3. increase the number of atmospheric layers detected in the CATS data. A Convolutional Neural Network (CNN) trained using CATS standard data products also demonstrated the potential for improved cloud-aerosol discrimination, cloud phase, and aerosol typing compared to the operational CATS algorithms for cloud edges and complex near-surface scenes during daytime. The ML tools described in this paper can facilitate the development of smaller, low-cost lidar systems in the future and enable real-time accessibility of lidar data products from future lidar systems for monitoring and forecasting of hazardous events.

John Yorks↗