Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “economic potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unraveling the ecological success of Iodidimonas in a bioreactor treating oil and gas produced water

Iodidimonas sp., a bacterium found in bioreactors treating oil and gas produced water as well as iodide-rich brines, has garnered attention for its unique ability to oxidize iodine. However, little is known about the metabolic capabilities that enable Iodidimonas sp. to thrive in certain unique ecological niches. In this study, we isolated, characterized, and sequenced three strains belonging to the Iodidimonas genus from the sludge of a membrane bioreactor used for produced water treatment. We investigated the genomic features of these isolates and compared them with the four publicly available isolate genomes from this genus, as well as a metagenome-assembled genome from the source bioreactor. Our Iodidimonas isolates had several genes associated with mitigating salinity, heavy metal, and organic compound stress, which likely help these bacteria to survive in produced water. Phenotyping tests revealed that while the isolates could utilize a wide variety of simple carbon substrates, they failed to degrade aliphatic or aromatic hydrocarbons, consistent with the lack of genes associated with common hydrocarbon degradation pathways in their genomes. We hypothesize that these microbes may lead a scavenging lifestyle in the bioreactor and similar iodide-rich brines. IMPORTANCE: Occupying a niche habitat and having few representative isolates, the genus Iodidimonas is a relatively understudied alphaproteobacterial group. Its ability to corrode pipes in iodine production facilities has economic implications, and its ability to generate potentially carcinogenic iodinated organic compounds during treatment of oil and gas produced water may cause environmental and health concerns with the recycling of treated water. Therefore, detailed characterization of the metabolic potential of the Iodidimonas isolates in this study both sheds light on their adaptation to the environmental conditions they inhabit and has environmental and economic significance.

Acharya, Shwetha M↗
DOE OSTI2026

Data for High Yield Production of 3-Hydroxypropionic Acid Using Issatchenkia orientalis

Biomanufacturing provides a more sustainable alternative to fossil-based chemical manufacturing. 3-Hydroxypropionic acid (3HP) is a top Department of Energy value-added chemical and precursor to bioplastics, yet cost-effective microbial production remains elusive. Here, we establish the acid-tolerant yeast Issatchenkia orientalis as a robust host for low-pH 3HP biosynthesis. Genome-scale modeling identifies the β-alanine pathway as optimal, offering the highest theoretical yield and lowest oxygen requirement. Thermodynamic analysis confirms its favorability under acidic conditions. Using sequence similarity network analysis, we discover highly active aspartate 1-decarboxylase (PAND), β-alanine-pyruvate aminotransferase (BAPAT), and 3HP dehydrogenase (YDFG), which significantly improve the pathway efficiency. Next, to further elevate the production, pathway optimization through multi-copy PAND integration, byproduct elimination (knockouts of pyruvate decarboxylase and glycerol-3-phosphate dehydrogenase), and reinforcement of aspartate flux by overexpression of pyruvate carboxylase and aspartate amino transferase improves the titer to 29 g/L in shake flasks. Fed-batch fermentation at pH 4 with low-cost corn steep liquor medium further increases the production to 92 g/L with 0.7 g/g yield and 0.55 g/L/h productivity. Techno-economic analysis indicates that such performance could potentially enable a financially viable process for sustainable acrylic acid production. This work establishes I. orientalis as a next-generation platform for cost-effective 3HP production and paves the way toward industrial commercialization.

Bioproducts↗
NASA NTRS1975

The value of forage measurement information in rangeland management

An economic model and simulation are developed to estimate the potential social benefit arising from the use of alternative measurement systems in rangeland management. In order to estimate these benefits, it was necessary to model three separate systems: the range environment, the rangeland manager, and the information system which links the two. The rancher's decision-making behavior is modeled according to sound economic principles. Results indicate substantial potential benefits, particularly when used in assisting management of government-operated ranges; possible annual benefits in this area range from $20 to $46 million, depending upon the system capabilities assumed. Possible annual benefit in privately-managed stocker operations range from $2.8 to $49.5 million, depending upon where actual rancher capabilities lie and what system capabilities are assumed.

Lietzke, K. R.↗
DOE OSTI2022

Supplementary Data for "Evaluation of the Economic Implications of Varied Pressure Drawdown Strategies Generated Using a Real-time, Rapid Predictive, Multi-fidelity Model for Unconventional Oil and Gas Wells" by Bello, K., Vikara, D., Sheriff, A., Viswanathan, H., Carr, T., Sweeney, M., O'Malley, D., Marquis, M., Vactor, R.T., and Cunha, L.

The Bello et al. study evaluates the impact of contrasting pressure drawdown on gas productivity and the resulting economics of a well in the Marcellus Shale of the Appalachian Basin. This research applies a techno-economic analysis approach to help identify potential ways pressure management strategies can be used to improve cumulative recovery of hydraulically fractured horizontal wells while maintaining project profitability. Gas production forecast outlook scenarios of the Marcellus Shale Energy and Environment Laboratory Laboratory's MIP-3H well were generated under varying pressure drawdowns using two approaches: 1) a novel physics-informed machine learning (PIML) workflow and 2) via traditional reservoir simulation in Computer Modeling Group’s (CMG) GEM Compositional & Unconventional Simulator. Cash flow and other economic metrics of interest were compiled on the production outlook using the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Unconventional Shale Well Economic Model (UShWEM).The sheets within this Microsoft ExcelTM workbook provide the economic metric outputs for the baseline condition and the one-at-a-time (OAT) sensitivity analysis of UShWEM's input parameters for each of the production scenarios evaluated.

Fracture Network Model↗
DOE OSTI2020

Gallium Oxide Techno-Economic Analysis for the Wide Bandgap Semiconductor Market

More than 30% of electrical energy passes through power electronics today with speculation that in the next decade this could grow to 80%. The wide bandgap semiconductor market is already approaching $1 billon USD in 2019 and is projected to be almost $7 billion USD in 2028. Even with its high cost, SiC, is starting to dislodge the incumbent Si technology in some applications, such as hybrid and electric vehicles, due to smaller size, and higher efficiency. We review and report the IHS Markit’s market predictions for wide bandgap semiconductor technologies, and highlight the technoeconomic analysis results for the manufacturing cost of Ga2O3 wafers. Specifically, we focus on the potential for Ga2O3 to be more economically advantageous than SiC using current manufacturing methods and then identify opportunities where research can further reduce the volume cost of Ga2O3 wafers.

28 EE - Advanced Manufacturing Office (EE-5A)↗
DOE OSTI2020

Renewable biohydrogen production from lignocellulosic biomass using fermentation and integration of systems with other energy generation technologies

Biohydrogen is a clean and renewable source of energy. It can be produced by using technologies such as thermochemical, electrolysis, photoelectrochemical and biological, etc. Among these technologies, the biological method (dark fermentation) is considered more sustainable and ecofriendly. Dark fermentation involves anaerobic microbes which degrade carbohydrate rich substrate and produce hydrogen. Lignocellulosic biomass is an abundantly available raw material and can be utilized as an economic and renewable substrate for biohydrogen production. Although there are many hurdles, continuous advancements in lignocellulosic biomass pretreatment technology, microbial fermentation (mixed substrate and co-culture fermentation), the involvement of molecular biology techniques, and understanding of various factors (pH, T, addition of nanomaterials) effect on biohydrogen productivity and yield render this technology efficient and capable to meet future energy demands. Further integration of biohydrogen production technology with other products such as bio-alcohol, volatile fatty acids (VFAs), and methane have the potential to improve the efficiency and economics of the overall process. In this study, various methods used for lignocellulosic biomass pretreatment, technologies in trends to produce and improve biohydrogen production, a coproduction of other energy resources, and techno-economic analysis of biohydrogen production from lignocellulosic biomass are reviewed.

09 BIOMASS FUELS↗
DOE OSTI2020

System-Level Optimization to Improve Biofuel Potential via Genetic Engineering and Hydrothermal Liquefaction

The economic success of biofuels and bioproducts depends on system-level optimization including biomass production and conversion. Hydrothermal liquefaction (HTL) can convert wet biomass such as microalgae into a biofuel intermediate (BFI) under elevated temperatures and pressure. An understanding of the impacts of biomass composition on BFI yield and quality can inform genetic engineering strategies in the improvement of biochemical composition for biofuel production. In this work, wild type cyanobacterium Synechocystis sp. PCC 6803 biomass was doped with various common cellular storage compounds in lab-scale HTL experiments. Doping with glycogen or polyhydroxybutyrate (PHB) significantly reduced BFI yields, while doping with triglycerides (TAG) or medium chain-length polyhydroxyalkanoate (mcl-PHA) increased BFI yield and quality. In light of these observations, a genetically engineered Synechocystis strain deficient in glycogen biosynthesis was cultivated to produce biomass for HTL, leading to a 17% increase in BFI yield. In addition, we built a multiphase component additivity (MCA) model that can predict BFI yield and quality with PHAs in the biomass. This work demonstrates an effective strategy to integrate strain development with downstream biomass conversion to maximize biofuel yield, with lessons applicable to microalgae as well as other biomass.

09 BIOMASS FUELS↗
DOE OSTI2024

Solar and Storage Integration in the Southeastern United States: Economics, Reliability, and Operations

Solar energy has the potential to be a core energy resource for the southeastern United States. To better understand the implications of higher levels of solar PV (27%-43% of total generation capacity) and electricity storage (13%-49% of peak load) would affect electricity system reliability, costs, and operations in the U.S. Southeast, this study sought to address two main questions. First, how would higher levels of solar PV and electricity storage impact the costs, reliability, and operations of electricity systems in the Southeast in 2035? Second, at different levels of solar PV and electricity storage, what are the benefits of operational coordination among utilities in the Southeast, through more efficient regional dispatch and sharing operating reserves? To answer these questions, the study used detailed capacity expansion and dispatch modeling to develop and examine 15 scenarios with different levels of solar PV, electricity storage, and operational coordination, focusing on the year 2035. The study also evaluates the benefits of operational coordination among utilities through more efficient regional dispatch and reserve sharing, at different levels of solar and storage. The study focuses on five balancing regions that cover Alabama, Georgia, Kentucky, North Carolina, South Carolina, Tennessee, and parts of Mississippi and Missouri.

14 SOLAR ENERGY↗
DOE OSTI2024

Solar and Storage Integration in the Southeastern United States: Economics, Reliability, and Operations

Solar energy has the potential to be a core energy resource for the southeastern United States. To better understand the implications of higher levels of solar PV (27%-43% of total generation capacity) and electricity storage (13%-49% of peak load) would affect electricity system reliability, costs, and operations in the U.S. Southeast, this study sought to address two main questions. First, how would higher levels of solar PV and electricity storage impact the costs, reliability, and operations of electricity systems in the Southeast in 2035? Second, at different levels of solar PV and electricity storage, what are the benefits of operational coordination among utilities in the Southeast, through more efficient regional dispatch and sharing operating reserves? To answer these questions, the study used detailed capacity expansion and dispatch modeling to develop and examine 15 scenarios with different levels of solar PV, electricity storage, and operational coordination, focusing on the year 2035. The study also evaluates the benefits of operational coordination among utilities through more efficient regional dispatch and reserve sharing, at different levels of solar and storage. The study focuses on five balancing regions that cover Alabama, Georgia, Kentucky, North Carolina, South Carolina, Tennessee, and parts of Mississippi and Missouri.

14 SOLAR ENERGY↗
NASA NTRS1978

Technical and Economic Evaluation of Advanced Air Cargo Systems

The current air cargo environment and the relevance of advanced technology aircraft in enhancing the efficiency of the 1990 air cargo system are discussed. NASA preliminary design studies are shown to indicate significant potential gains in aircraft efficiency and operational economics for future freighter concepts. Required research and technology elements are outlined to develop a better base for evaluating advanced design concepts. Current studies of the market operation are reviewed which will develop design criteria for a future dedicated cargo transport. Design features desirable in an all-freighter design are reviewed. NASA-sponsored studies of large, distributed-load freighters are reviewed and these designs are compared to current wide-body aircraft. These concepts vary in gross takeoff weight from 0.5 Gg (one million lbs.) to 1.5 Gg (three million lbs.) and are found to exhibit economic advantages over conventional design concepts.

Whitehead, A. H., Jr.↗
NASA NTRS1980

Ion-implanted laser annealed silicon solar cells

Development of low cost solar cells fabrication technology is being sponsored by NASA JPL as part of the Low Cost Solar Array Project (LSA). In conformance to Project requirements ion implantation and laser annealing were evaluated as junction formation techniques offering low cost-high throughput potential. Properties of cells fabricated utilizing this technology were analyzed by electrical, transmission electron microscopy, Rutherford backscattering and secondary ion mass spectrometry techniques. Tests indicated the laser annealed substrates to be damage free and electrically active. Similar analysis of ion implanted furnace annealed substrates revealed the presence of residual defects in the form of dislocation lines and loops with substantial impurity redistribution evident for some anneal temperature/time regimes. Fabricated laser annealed cells exhibited improved spectral response and conversion efficiency in comparison to furnace annealed cells. An economic projection for LSA indicates a potential for considerable savings from laser annealing technology.

Katzeff, J. S.↗
DOE OSTI2021

Impoverishing Roots Will Improve Wheat Yield and Profitability Through Increased Water and Nitrogen Use Efficiencies

We report that more than a 60% increase in crop production is required by the 2050's to feed a growing world population. Understanding how plant functional traits and field management affect crop yields has the potential to improve agricultural productivity, minimize economic and environmental losses, and maximize food security. We explored the influence of winter wheat root characteristics and management on winter wheat growth, yield, and profit using a mechanistic and well-tested ecosystem and crop model, ecosys. We applied and further tested ecosys at an agricultural farm growing winter wheat in Ardmore, Oklahoma, United States. The model accurately predicted observed shoot carbon (R 2 = 0.95), soil moisture (R 2 = 0.67), soil temperature (R 2 = 0.91), and yield (percent error = 17%). Numerical optimization experiments were conducted to explore potential improvements of winter wheat yield and profit by modifying root characteristics, including root radius and root:shoot carbon transfer conductance, and fertilizer inputs. Our results show the potential for simultaneously improving winter wheat yields and profits. The optimum conditions were found to be in the range of root radius between 0.1 and 0.3 mm, carbon transfer conductance between 0.004 and 0.01 h -1 , and the currently applied fertilizer rate of 112 kg ha -1 . Under these conditions, improvements in yields and profits of up to approximately 25% and 110%, respectively, were modeled compared to those under baseline root traits. These improvements were achieved by impoverishing root structures, thereby increasing nutrient allocation to grains. Our results also demonstrate and motivate model structures that integrate the complex network of plant physiology, soil nutrient biogeochemistry, hydrology, and management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Optimizing tradeoffs implicit during bioenergy crop improvement: Understanding the effect of altered cell wall and sugar content on sorghum-associated pathogenic bacteria

Plant-derived production of renewable fuels and chemicals has the potential to reduce fossil fuel dependency, increase domestic energy security, enhance US farming and agricultural economic opportunities, and reduce greenhouse gas emissions. Realizing the potential of these alternate energy sources necessitates the development of high biomass-yielding crops. To limit competition with the production of food and feed, these specialized crop varieties, many of which will harbor modifications to cell wall structures and display altered carbon partitioning, will be cultivated on marginal land that does not provide ideal growing conditions. Consequently, the plants are anticipated to be more vulnerable to diseases.

09 BIOMASS FUELS↗
DOE OSTI2024

Estimated attribution of the RFS program on soybean biodiesel in the U.S. using the bioenergy scenario model

Biofuels are supported by various governmental policies in the U.S. and globally as an alternative transportation fuel for environmental, geopolitical, and economic reasons. Much debate surrounds the effectiveness of these policies as well as the overall net environmental effect of increased biofuels use. In the U.S., recent studies have shown that the Renewable Fuels Standard (RFS) Program, overall, may not have been the leading driver of the ethanol industry from 2005 to 2020, contrary to common perception. Similar scrutiny has not been applied to biodiesel. Here, this study uses the Bioenergy Scenario Model, a well-vetted system dynamics model, to retrospectively apportion historical biodiesel production between the RFS Program and other potentially influential drivers, such as the economics of biodiesel vs. diesel, the Biodiesel Tax Credit (BTC), California's Low Carbon Fuel Standard, and other factors. From 2002 to 2020 about 36% of biodiesel production can be attributed to the RFS Program, 35% to the BTC, and the rest to other factors. Thus, the overall effect of the RFS Program appears much larger on biodiesel than on corn ethanol. The finding that the same policy may have very disparate effects on different biofuels helps inform the design of future policies on biofuels.

09 BIOMASS FUELS↗
DOE OSTI2025

Carbon Utilization and Storage Partnership of the Western United States

This technical report documents research conducted under DOE Award No. DE-FE0031837 focused on evaluating the feasibility of carbon capture, utilization, and storage (CCUS) systems in the central and western United States. The project integrated geologic characterization, reservoir simulation, infrastructure modeling, and economic analysis to assess CO₂ storage potential near industrial sources and develop strategies for transport and sequestration. The work included subsurface modeling, risk assessment, monitoring and verification (MRV) planning, and evaluation of regulatory pathways such as EPA Underground Injection Control (UIC) Class VI permitting and IRS 45Q tax credit eligibility. Results demonstrate the viability of multiple storage approaches, including saline formations, enhanced coalbed methane recovery, and basalt mineralization, supported by data-driven workflows and regional analyses. The project also produced permitting templates, technology transfer activities, and stakeholder engagement efforts to support deployment readiness. These findings contribute to the development of scalable, economically viable CCUS systems and provide a repeatable framework for future carbon management projects.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Source term analysis of FeCrAl accident tolerant fuel using MELCOR

It has been established that incremental improvements in beyond design basis accident performance can be achieved through accident tolerant fuel (ATF). However, they have the potential to recover margin with respect to conventional fuel and therefore enhance plant economics through uprate or cycle length increase. To realize this potential, it is necessary to quantify the reduction in source term due to use of ATF, and correspondingly how this is affected by increasing the cycle length and/or burnup. This requires development of a risk informed analysis methodology for ATF under high burnup conditions, which is being developed within LWRS. To this end, a MELCOR simulation of FeCrAl ATF in a recovered Large Break LOCA (LBLOCA) scenario has been developed, using a model based on the Zion Pressurized Water Reactor (PWR). The new user defined material capability, along with the inclusion of detailed neutronics- and depletion-derived parameters such as core power distribution, decay heat behavior, and fission product inventories, allows a more detailed simulation of FeCrAl clad material properties and behavior than has previously been possible using MELCOR. These detailed FeCrAl results were compared with a zircaloy clad model to investigate the differences between the two clad types and quantify the benefits of FeCrAl ATF with an 18-month cycle. Next, the fuel cycle with ATF was extended to 24 months, to determine whether any additional safety margin provided by FeCrAl ATF could be leveraged to implement high burnup FeCrAl-clad fuel while retaining the same operating and safety limits as current zircaloy-clad fuel. For the particular scenario analyzed, the delay to fuel failure from using ATF was of the same order as the LOCA recovery time, and hence significant in reducing fission product release, with the 24-month FeCrAl core performing better than the 18-month zircaloy core. It is noted that for other transients, the reduction in release due to using FeCrAl may be less significant. Furthermore, the material model developed here can be used in such further studies in support of determining the overall source term.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

A comparison between residential relocation timing of Sydney and Chicago residents: A Bayesian survival analysis

We report that understanding households' behaviour in residential relocation timing is of great importance in the field of transport engineering and economics. This research aims to develop a residential relocation model by considering the potential dynamic impacts of other households' decisions and variables, including economic and demographic attributes, housing features, intra-household decision-making structures, travel mode choice, and other life-course attributes. A multivariate parametric survival model with both fixed and time-varying covariates is developed. To the best of the authors' knowledge, this study is the first paper in the literature of residential relocation timing to propose the use of a Bayesian model in contrast to the widely used classic frequentist approach and have conducted a discussion on its advantages. An emerging residential relocation dataset collected for two cities in Australia and the USA (Sydney and Chicago cities) has been used, which covers residence, vehicle ownership, occupation, education, economic and demographic attributes of respondents. A comprehensive comparison between the results of two cities and a comparison between two Bayesian and frequentist approaches are made. This study confirms the impact of life-course variables, intra-household decision-making behaviours, and sociodemographic attributes on home mobility. According to the model outputs, the accelerating or decelerating impact of explanatory variables on the relocation timing has been almost the same in the two cities. The Bayesian model was confirmed to have some advantages over the frequentist model, including being straightforward to interpret, availability of making inferences on the results, and ease of handling complex models, and optimisation convergence complexities.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS2012

The Agricultural Model Intercomparison and Improvement Project (AgMIP): Protocols and Pilot Studies

The Agricultural Model Intercomparison and Improvement Project (AgMIP) is a major international effort linking the climate, crop, and economic modeling communities with cutting-edge information technology to produce improved crop and economic models and the next generation of climate impact projections for the agricultural sector. The goals of AgMIP are to improve substantially the characterization of world food security due to climate change and to enhance adaptation capacity in both developing and developed countries. Analyses of the agricultural impacts of climate variability and change require a transdisciplinary effort to consistently link state-of-the-art climate scenarios to crop and economic models. Crop model outputs are aggregated as inputs to regional and global economic models to determine regional vulnerabilities, changes in comparative advantage, price effects, and potential adaptation strategies in the agricultural sector. Climate, Crop Modeling, Economics, and Information Technology Team Protocols are presented to guide coordinated climate, crop modeling, economics, and information technology research activities around the world, along with AgMIP Cross-Cutting Themes that address uncertainty, aggregation and scaling, and the development of Representative Agricultural Pathways (RAPs) to enable testing of climate change adaptations in the context of other regional and global trends. The organization of research activities by geographic region and specific crops is described, along with project milestones. Pilot results demonstrate AgMIP's role in assessing climate impacts with explicit representation of uncertainties in climate scenarios and simulations using crop and economic models. An intercomparison of wheat model simulations near Obregón, Mexico reveals inter-model differences in yield sensitivity to [CO2] with model uncertainty holding approximately steady as concentrations rise, while uncertainty related to choice of crop model increases with rising temperatures. Wheat model simulations with midcentury climate scenarios project a slight decline in absolute yields that is more sensitive to selection of crop model than to global climate model, emissions scenario, or climate scenario downscaling method. A comparison of regional and national-scale economic simulations finds a large sensitivity of projected yield changes to the simulations' resolved scales. Finally, a global economic model intercomparison example demonstrates that improvements in the understanding of agriculture futures arise from integration of the range of uncertainty in crop, climate, and economic modeling results in multi-model assessments.

Rosenzweig, C.↗