Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Accuracy of Thermodynamic Databases for Hydroxyapatite Dissolution Constant

We report that discrepancies have been noted in the solubility constant values of calcium phosphate minerals between various databases employed in widely-used aqueous speciation calculation software programs. This can cause serious errors in the calculated speciation of waters using these software programs. The aim of the present communication was to bring to light these discrepancies. Experimental determinations of the hydroxyapatite solubility product vary by as much as ten orders of magnitude as a result of experimental challenges related to the presence of impurities in the hydroxyapatite used, incongruent dissolution and the contamination of solutions with dissolved carbon dioxide. Finally, it is suggested that the value used in the database Thermo.dat is consistent with experimental data devoid of common experimental problems, while other common databases use values that lead to a vastly overestimated solubility of hydroxyapatite.

58 GEOSCIENCES↗

Dissolution of Oxygen Precipitate Nuclei in n-Type CZ-Si Wafers to Improve Their Material Quality: Experimental Results

We present experimental results which show that oxygen-related precipitate nuclei (OPN) present in p-doped, n-type, Czochralski wafers can be dissolved using a flash-annealing process, yielding very high quality wafers for high-efficiency solar cells. Flash annealing consists of heating a wafer in an optical furnace to temperature between 1150 and 1250 degrees C for a short time. This process produces a large increase in the minority carrier lifetime (MCLT) and homogenizes each wafer. We have tested wafers from different axial locations of two ingots. All wafers reach nearly the same high value of MCLT. The OPN dissolution is confirmed by oxygen analysis using Fourier transform infrared spectra and injection-level dependence of MCLT.

14 SOLAR ENERGY↗

Expanded Diversity of Microbial Groups Capable of Anaerobic Pyrite Reduction and Assimilation of Dissolution Products

Pyrite, the most abundant iron sulfide mineral in the Earth's crust, has traditionally been considered as a sink for iron and sulfur in the absence of oxygen. Recent research, however, has shown that anaerobic methanogenic archaea can reductively dissolve pyrite and assimilate its products as sources of iron and sulfur. This study explores whether other anaerobic bacteria, including fermentative, nitrate-, iron oxide-, fumarate-, and sulfate-respiring bacteria, can also reduce pyrite and use its dissolution products as sources of iron and sulfur. Results indicate that heterotrophic bacteria respiring fumarate or sulfate, or fermenting organic carbon, can reduce pyrite and assimilate released iron and sulfur. In contrast, nitrate- or iron oxide-respiring cells did not reduce pyrite, suggesting that microbial pyrite reduction is metabolism-specific. All strains capable of reducing pyrite could also use mackinawite as an iron and sulfur source. With the exception of fermentative Bacteroides, strains did not require direct contact with pyrite to reduce the mineral, indicating extracellular electron transfer via electron shuttles. These findings expand the known diversity of microbial groups capable of pyrite reduction and highlight the mineral's lability in various anaerobic environments, with potential implications for the biogeochemical cycles of iron, sulfur, carbon, and oxygen.

58 GEOSCIENCES↗

Rapid and near-complete dissolution of wood lignin at ≤80°C by a recyclable acid hydrotrope

We report the discovery of the hydrotropic properties of a recyclable aromatic acid, p-toluenesulfonic acid (p-TsOH), for potentially low-cost and efficient fractionation of wood through rapid and near-complete dissolution of lignin. Approximately 90% of poplar wood (NE222) lignin can be dissolved at 80°C in 20 min. Equivalent delignification using known hydrotropes, such as aromatic salts, can be achieved only at 150°C or higher for more than 10 hours or at 150°C for 2 hours with alkaline pulping. p-TsOH fractionated wood into two fractions: (i) a primarily celluloserich water-insoluble solid fraction that can be used for the production of high-value building blocks, such as dissolving pulp fibers, lignocellulosic nanomaterials, and/or sugars through subsequent enzymatic hydrolysis; and (ii) a spent acid liquor stream containing mainly dissolved lignin that can be easily precipitated as lignin nanoparticles by diluting the spent acid liquor to below the minimal hydrotrope concentration. Our nuclear magnetic resonance analyses of the dissolved lignin revealed that p-TsOH can depolymerize lignin via ether bond cleavage and can separate carbohydrate-free lignin from the wood. p-TsOH has a relatively low water solubility, which can facilitate efficient recovery using commercially proven crystallization technology by cooling the concentrated spent acid solution to ambient temperatures to achieve environmental sustainability through recycling of p-TsOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranium Anodic Dissolution under Slightly Alkaline Conditions

Argonne National Laboratory is developing an alternative method for digesting irradiated low enriched uranium foil targets to produce 99 Mo in neutral/alkaline media. This method involves the electrolytic dissolution of irradiated uranium foil in sodium bicarbonate solution, followed by the precipitation of carbonate, base-insoluble fission and activation products, and uranyl species with CaO. The addition of CaO is vital for the effective anion exchange separation of 99 MoO 4 2- from the fission products, since most of the interfering anions (e.g., CO 3 2- ) are removed from the solution while the molybdate remains in it. An anion exchange is used to retain and purify the 99 Mo from the filtrate. The electrochemical dissolver has been designed and will be tested with low-burnup depleted uranium foil at Argonne and later with high-burnup targets at Oak Ridge National Laboratory.

Guelis, Artem V.↗

HFIR Dissolution Nuclear Criticality Analysis Information

The purpose of this analysis is to demonstrate the safety of High Flux Isotope Reactor (HFIR) dissolution from a criticality safety perspective and to establish any Criticality Safety Limits (CSLs) that may be necessary. HFIR fuel consists of two annular elements that are designed to be nested together with a beryllium reflector in the reactor configuration. HFIR cores are currently stored in L-Area as separate inner elements and outer elements, each on a unique aluminum carrier. HFIR elements will be shipped to H-Canyon in the 70-ton Cask Railcar and loaded into the dissolver with the HFIR insert installed. The HFIR insert consists of a small well for the inner fuel element and a large well for the outer fuel element.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low Temperature Aluminum Dissolution (LTAD) Real Waste Testing of the November 2017 Tank 51 Slurry Sample

Low Temperature Aluminum Dissolution (LTAD) will be performed on Tank 51 sludge prior to sending Sludge Batch 10 to the Defense Waste Processing Facility (DWPF), such that a sizable fraction of the insoluble aluminum will be dissolved and removed. During LTAD, the free hydroxide concentration and temperature of the sludge slurry are both raised, resulting in significantly increased aluminum solubility, which facilitates aluminum removal via decanting of the liquid phase. This Research and Development task will provide input information regarding the expected gas generation rates under the bounding temperature and free hydroxide conditions of the upcoming Tank 51 LTAD evolution. It will also provide information on the expected fraction of insoluble aluminum that will dissolve as a function of temperature and time, as well as the expected chemical and phys ical properties of the Tank 51 sludge slurry, prior to and following the LTAD operations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Total Moisture Analysis of Salts by Dissolution

This report discusses recent efforts within TA-48 in developing a robust, defensible, and straightforward procedure for determining the moisture content of alkali and alkaline metal halide salts utilizing a total dissolution Karl-Fischer titration method. Utilizing statistical analysis of blank and dissolved salt samples, we determine a (3 sigma) detection limit of 67 micrograms H 2 O/g salt, and a (10 sigma) quantification limit of 160 micrograms H 2 O/g salt. Several salts are analyzed, and suggestions for future efforts are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Classification and Fusion of Two Disparate Data Streams and Nuclear Dissolutions Application

We consider two streams of data or measurements with disparate qualities and time resolutions that need to be classified. The first stream consists of higher quality data at a coarser time resolution, and the other consists of lower quality data at a finer time resolution. We present a fuser-switch method that fuses the set of classifiers of each stream separately and switches between them. We show that this method provides classification decisions at a finer time resolution with superior detection and false alarm probabilities compared to individual classifiers, under the statistical independence and time resolution ratio conditions. When classifiers are trained using machine learning methods, we show that this superior performance is guaranteed with a confidence probability specified by the classifiers' generalization equations. We use these results to provide analytical foundations for previous practical results that achieved significant performance improvements in classifying Pu/Np target dissolution events at a radiochemical processing facility.

Rao, Nageswara↗

IMPACT OF NUCLEAR MATERIAL DISSOLUTION ON VESSEL CORROSION

Different nuclear materials require different processing conditions. In order to maximize the dissolver vessel lifetime, corrosion testing was conducted for a range of chemistries and temperature used in fuel dissolution. Compositional ranges of elements regularly in the dissolver were evaluated for corrosion of 304L, the material of construction. Corrosion rates of AISI Type 304 stainless steel coupons, both welded and non-welded coupons, were calculated from measured weight losses and post-test concentrations of soluble Fe, Cr and Ni.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Controlled in-situ dissolution of an alkali metal

A method for the controllable dissolution of one or more alkali metals from a vessel containing a one or more alkali metals and/or one or more partially passivated alkali metals. The vessel preferably comprising a sodium, NaK or other alkali metal-cooled nuclear reactor that has been used. The alkali metal, preferably sodium, potassium or a combination thereof, in the vessel is exposed to a treatment liquid, preferably an acidic liquid, more preferably citric acid. Preferably, the treatment liquid is maintained in continuous motion relative to any surface of unreacted alkali metal with which the treatment liquid is in contact. The treatment liquid is preferably pumped into the vessel containing the one or more alkali metals and the resulting fluid is extracted and optionally further processed. Preferably, the resulting off-gases are processed by an off-gas treatment system and the resulting liquids are processed by a liquid disposal system. In one preferred embodiment, an inert gas is pumped into the vessel along with the treatment liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Safe Dissolution of High Flux Isotope Reactor Cores

The H-Canyon facility at the Savannah River Site is the U.S.A.’s only remaining full- scale chemical separations plant. H-Canyon maintains the capacity to safely and efficiently disposition a large inventory of excess nuclear material from across the Department of Energy (DOE) complex and used nuclear fuel from foreign and domestic research reactors. One such fuel that H-Canyon may dissolve is cores from the High Flux Isotope Reactor (HFIR). By employing realistic analysis, the need for administrative controls was eliminated. A new criticality modeling approach has eliminated the need for administrative controls for HFIR dissolution operations in H-Canyon. The primary upsets of concern are an over-mass event and an overconcentration event. Several initiating events were considered for each type of upset. Over-concentration events were deemed to be not credible by taking credit for the chemistry of acid consumption, i.e. there are not enough moles of acid to dissolve enough moles of uranium in order to reach a critical configuration. Over-mass events were deemed to be not credible by taking credit for the annular design of the fuel elements. By using realistic analysis, both types of upsets have been shown to be subcritical, and therefore administrative controls are not needed to prevent an inadvertent criticality. In this paper, the new methodology for performing criticality analyses for dissolving HFIR fuel elements will be presented, and the elimination of administrative controls will be discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

System and process for dissolution of solids

A system and process are disclosed for dissolution of solids and "difficult-to-dissolve" solids. A solid sample may be ablated in an ablation device to generate nanoscale particles. Nanoparticles may then swept into a coupled plasma device operating at atmospheric pressure where the solid nanoparticles are atomized. The plasma exhaust may be delivered directly into an aqueous fluid to form a solution containing the atomized and dissolved solids. The composition of the resulting solution reflects the composition of the original solid sample.

36 MATERIALS SCIENCE↗

Dissolution and separation of rare earth metals

A chemical dissolution method is provided for use in recycling rare earth metal-containing material such as permanent magnet material including end-of-life magnet shapes, magnet scrap and Terfenol-D alloy material by mixing the rare earth metal-containing material and an aqueous solution of a copper (II) salt to dissolve the material in the solution. The dissolved rare earth metal is then precipitated from the aqueous solution as a rare earth metal compound, such as a rare earth metal oxalate, sulfate or phosphate from which rare earth metal oxide can be obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution of Mechanically Mixed UO2-PuO2 and Insoluble Residue Characteristics

During the reprocessing operations of mixed oxide fuel the dissolution step plays a very important role in the attainment of an acceptable plutonium recovery yield. The importance of this step on the overall fuel cycle was recognized by many authors but was especially treated in depth by Lerch [1] and Nicholson [2].

De Regge, P.↗