Measurement of liquid and two-phase hydrogen densities with a capacitance density meter
Measurement of liquid and two phase hydrogen densities with capacitance density meter
Snyder, R. W.↗
SEARCH · Engineering Papers
Results for “density measurement”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
RMS electron density fluctuation at 1 AU
Analytic expressions at 1 AU for the average RMS Electron Density Fluctuation and the ratio of RMS Electron Density Fluctuation to Electron Density, both as functions of the observational time scale, are constructed from average spacecraft in situ density measurements at approximately 1 AU and columnar phase fluctuation measurements over a wide variety of signal closet approach points. Additionally, the (one-dimensional) Electron Density Fluctuation spectrum and the Doppler phase fluctuation scale are derived, and various extrapolations to the region interior to 1 AU are made.
Berman, A. L.↗
Comparison of Landsat-7 Enhanced Thematic Mapper Plus (ETM+) and Earth Observing One (EO-1) Advanced Land Imager
We compare images from the Enhanced Thematic Mapper Plus (ETM+) sensor on Landsat-7 and the Advanced Land Imager (ALI) instrument on Earth Observing One (EO-1) over a test site in Rochester, New York. The site contains a variety of features, ranging from water of varying depths, deciduous/coniferous forest, and grass fields, to urban areas. Nearly coincident cloud-free images were collected one minute apart on 25 August 2001. We also compare images of a forest site near Howland, Maine, that were collected on 7 September, 2001. We atmospherically corrected each pair of images with the Second Simulation of the Satellite Signal in the Solar Spectrum (6S) atmosphere model, using aerosol optical thickness and water vapor column density measured by in situ Cimel sun photometers within the Aerosol Robotic Network (AERONET), along with ozone density derived from the Total Ozone Mapping Spectrometer (TOMS) on the Earth Probe satellite. We present true-color composites from each instrument that show excellent qualitative agreement between the multispectral sensors, along with grey-scale images that demonstrate a significantly improved ALI panchromatic band. We quantitatively compare ALI and ETM+ reflectance spectra of a grassy field in Rochester and find < or equal to 6% differences in the visible/near infrared and approx. 2% differences in the short wave infrared. Spectral comparisons of forest sites in Rochester and Howland yield similar percentage agreement except for band 1, which has very low reflectance. Principal component analyses and comparison of normalized difference vegetation index histograms for each sensor indicate that the ALI is able to reproduce the information content in the ETM+ but with superior signal-to-noise performance due to its increased 12-bit quantization.
Pedelty, Jeffrey A.↗
A Regional CO2 Observing System Simulation Experiment for the ASCENDS Satellite Mission
Top-down estimates of the spatiotemporal variations in emissions and uptake of CO2 will benefit from the increasing measurement density brought by recent and future additions to the suite of in situ and remote CO2 measurement platforms. In particular, the planned NASA Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) satellite mission will provide greater coverage in cloudy regions, at high latitudes, and at night than passive satellite systems, as well as high precision and accuracy. In a novel approach to quantifying the ability of satellite column measurements to constrain CO2 fluxes, we use a portable library of footprints (surface influence functions) generated by the WRF-STILT Lagrangian transport model in a regional Bayesian synthesis inversion. The regional Lagrangian framework is well suited to make use of ASCENDS observations to constrain fluxes at high resolution, in this case at 1 degree latitude x 1 degree longitude and weekly for North America. We consider random measurement errors only, modeled as a function of mission and instrument design specifications along with realistic atmospheric and surface conditions. We find that the ASCENDS observations could potentially reduce flux uncertainties substantially at biome and finer scales. At the 1 degree x 1 degree, weekly scale, the largest uncertainty reductions, on the order of 50 percent, occur where and when there is good coverage by observations with low measurement errors and the a priori uncertainties are large. Uncertainty reductions are smaller for a 1.57 micron candidate wavelength than for a 2.05 micron wavelength, and are smaller for the higher of the two measurement error levels that we consider (1.0 ppm vs. 0.5 ppm clear-sky error at Railroad Valley, Nevada). Uncertainty reductions at the annual, biome scale range from 40 percent to 75 percent across our four instrument design cases, and from 65 percent to 85 percent for the continent as a whole. Our uncertainty reductions at various scales are substantially smaller than those from a global ASCENDS inversion on a coarser grid, demonstrating how quantitative results can depend on inversion methodology. The a posteriori flux uncertainties we obtain, ranging from 0.01 to 0.06 Pg C yr-1 across the biomes, would meet requirements for improved understanding of long-term carbon sinks suggested by a previous study.
remote sensing↗
Airborne Double Pulsed 2-Micron IPDA Lidar for Atmospheric CO2 Measurement
We have developed an airborne 2-micron Integrated Path Differential Absorption (IPDA) lidar for atmospheric CO2 measurements. The double pulsed, high pulse energy lidar instrument can provide high-precision CO2 column density measurements.
Yu, Jirong↗
Measurement of atmospheric density using gamma backscatter techniques.
Gamma ray backscatter principles for measurement of atmospheric density, using test results from altitude chambers in balloon and sounding rocket payloads
BACKSCATTER↗
Intercomparison of density and temperature profiles obtained by lidar, ionizatoin gauges, falling spheres, datasondes and radiosondes during the DYANA campaign
During the course of the DYnamics Adapted Network for the Atmosphere (DYANA) campaign in early 1990, various techniques to measure densities and temperatures from the ground up to the lower thermosphere were employed. Some of these measurements were performed near simultaneously (maximum allowed time difference: 1 h) and at the same location, and therefore offered the unique chance of intercomparison of different techniques. In this study, we will report on intercomparisons of data from ground-based instruments (Rayleigh- and sodium-lidar), balloon-borne methods (datasondes and radiosondes) and rocket-borne techniques (falling spheres and ionization gauges). The main result is that there is good agreement between the various measurements when considering the error bars. Only occasionally did we notice small but systematic differences (e.g. for the datasondes above 65 km). The most extensive intercomparison was possible between the Rayleigh lidar and the falling sphere technique, both employed in Biscarrosse (44 deg N, 1 deg W). Concerning densities, excellent agreement was found below 63 km: the mean of the deviations is less than 1% and the root mean square (RMS) is approximately 3%. Systematic differences of the order of 5% were noticed around 67 km and above 80 km. The former can be accounted for by an instrumental effect of the falling sphere (Ma = 1 transition; Ma = Mach number), whereas the latter is tentatively explained by the presence of Mie scatterers in the upper mesosphere. Concerning temperatures, the agreement is excellent between 35 and 65 km: the mean of the deviations is less than +/- 3 K and the variability is +/- 5 K. The two systematic density differences mentioned above also affect the temperatures: between 65 and 80 km, the Rayleigh lidar temperatures are systematically lower than the falling sphere values by approximately 5 K.
Lubken, F.-J.↗
Comparison of Doppler scintillation and in situ spacecraft plasma measurements of interplanetary disturbances
Results are presented of detailed comparisons between Doppler scintillation and in situ plasma measurements to improve the understanding of Doppler scintillation transients. During a combined observing period of nearly 3 mo in 1981-1982 near solar maximum, 22 transients were observed by the Pioneer Venus Orbiter spacecraft and 23 shocks were observed by Helios 1. It is found that at least 84 percent of the transients are shocks, while at least 90 percent of the shocks are transients. Although the temporal profiles of Doppler scintillation and mass flux density are similar, the magnitudes of the Doppler scintillation transients may not simply reflect those of mass flux density. Only one pronounced solar wind event that was observed in the mass flux density measurements showed no signature in the scintillation data; field and particle measurements by Helios 1 suggest that it is a noncompressive density enhancement and/or a magnetic cloud. It is shown that Doppler scintillation measurements can now be used by themselves to detect and locate interplanetary shocks near the sun with a relatively high degree of certainty.
Woo, Richard↗
Characterization of ceramic fuel powder packing fractions to support INFLUX
Triply periodic minimal surface (TPMS)-based structures show marked potential in novel nuclear reactor fuel designs, as their high surface area-to-volume ratio increases the efficiency of heat transfer out of the fuel, enabling safer, more innovative reactor designs. This milestone report addresses the role of dUO 2 powder processing route on the fill behavior of TPMS-based cladding shells to understand and advance the feasibility of manufacturing TPMS-based nuclear fuel forms. dUO 2 powder was processed through either a dry granulation route, varying consolidation pressure, or through milling, varying milling time, milling method and milled size distribution. The lowest tapped bulk densities (TBD), but best powder flowabilities, were obtained when testing unprocessed dUO 2 powder which was prone to self-agglomeration and formed low-density spheroids. The highest TBD and lowest flowabilities were obtained when using powder produced by hammer-milling dUO 2 powder to pass through a 200-mesh sieve, which led to particles with angular morphologies. Powder produced by dry granulation exhibited TBD that varied according to the consolidation pressure used to form the initial pellets and exhibited improved flowabilities when compared to hammer-milled material. Because of the large span of granule sizes formed as well as the irregular shape associated with the granules, a packing fraction of 0.69 was achieved, exceeding the analytical solution for random close packing of mono-sized spheres. TPMS polymer shells were loaded with unprocessed, granulated, and hammer-milled dUO 2 powders, and their qualitative packing behaviors were analyzed using x-ray computed tomography (xCT). TBDs calculated after loading TPMS polymer shells were 10-20% lower when compared to tapped bulk density measurements taken in a glass graduated cylinder, indicating a non-trivial impact on the tapped bulk density of either the TPMS channel size, TPMS channel surface material, powder cohesiveness, or a combination of the two parameters. A metallic zircaloy-4 TPMS shell will be loaded with hammer-milled dUO 2 powder upon receipt of the shell from Oak Ridge National Laboratory (ORNL) and shipped to Idaho National Labs (INL) for subsequent hot isostatic pressing (HIP) densification experiments.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Preliminary measurements of velocity, density and total temperature fluctuations in compressible subsonic flow
The heat transfer characteristics of a three-wire hot-wire probe operated with a constant temperature anemometer were investigated in the subsonic compressible flow regime. The sensitivity coefficients, with respect to velocity, density and total temperature, were measured and the results were used to calculate the velocity, density, and total temperature fluctuations in the test section of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT). These results were extended to give estimates for fluctuations due to vorticity, sound, and entropy. In addition, attempts were made to determine the major source of disturbances in the 0.3-m TCT.
Stainback, P. C.↗
Measurement of beam divergence of 30-centimeter dished grids
The beam divergence of a 30-centimeter diameter thruster with dished grids was calculated from current densities measured with a probe rake containing seventeen planar molybdenum probes. The measured data were analyzed as a function of a number of parameters. The most sensitive parameters were the amount of compensation of the accelerator grid and the ratio of net to total accelerating voltage. The thrust losses were reduced by over 5 percent with the use of compensated grids alone, and by variation of other parameters the overall thrust losses due to beam divergence were reduced to less than 2 percent.
Danilowicz, R. L.↗
Measurement of beam divergence of 30-centimeter dished grids
The beam divergence of a 30-centimeter diameter thrustor with dished grids was calculated from current densities measured with a probe rake containing seventeen planar molybdenum probes. The measured data were analyzed as a function of a number of parameters. The most sensitive parameters were the amount of compensation of the accelerator grid and the ratio of net to total accelerating voltage. The thrust losses were reduced by over 5 percent with the use of compensated grids alone, and by variation of other parameters the overall thrust losses due to beam divergence were reduced to less than 2 percent.
Danilowicz, R. L.↗
Comparison of measured and modeled solar EUV flux and its effect on the E-F1 region ionosphere
Two different photochemical schemes are used to investigate the response of the E-F1 region ionosphere to different solar EUV flux models, and the results are compared with incoherent scatter radar electron density measurements taken at Millstone Hill. The latest EUV flux model (Tobiska, 1991), which incorporates more recent measurements, has generally more flux at short wavelengths compared to the Hinteregger et al. (1981) flux model based on AE-E satellite data. This results in better agreement with the measurements in the E-F1 region and above. The Tobiska flux model gives a smaller E region peak density, due to the influence of low Ly-beta flux in the November 10, 1988 rocket measurements of Woods and Rottman (1990). The photoionization and photoabsorption cross sections of Conway (1988) give results in somewhat better agreement with observations than the cross sections of Torr et al. (1979). For the zenith angles considered (daytime conditions), the Chapman function method for calculating photoabsorption yields results in satisfactory agreement with a more rigorous calculation method using a formula from Rees (1989).
Buonsanto, M. J.↗
Neural network denoising of x-ray images from high-energy-density experiments
Noise is a consistent problem for x-ray transmission images of High-Energy-Density (HED) experiments because it can significantly affect the accuracy of inferring quantitative physical properties from these images. We consider experiments that use x-ray area backlighting to image a thin layer of opaque material within a physics package to observe its hydrodynamic evolution. The spatial variance of the x-ray transmission across the system due to changing opacity serves as an analog for measuring density in this evolving layer. The noise in these images adds nonphysical variations in measured intensity, which can significantly reduce the accuracy of our inferred densities, particularly at small spatial scales. Denoising these images is thus necessary to improve our quantitative analysis, but any denoising method also affects the underlying information in the image. In this paper, we present a method for denoising HED x-ray images via a deep convolutional neural network model with a modified DenseNet architecture. In our denoising framework, we estimate the noise present in the real (data) images of interest and apply the inferred noise distribution to a set of natural images. These synthetic noisy images are then used to train a neural network model to recognize and remove noise of that character. We show that our trained denoiser network significantly reduces the noise in our experimental images while retaining important physical features.
47 OTHER INSTRUMENTATION↗
Population balance modeling of polyurethane foam formation with pressure‐dependent growth kernel
Abstract Polyurethane foams are widely used materials often chosen for their useful characteristics such as low thermal conductivity, ease of application, and high strength‐to‐weight ratios. Computational models are needed to predict the dynamics of the flow and expansion, and the resulting material properties, to improve manufacturing processes. In this paper, a model for PMDI, a water‐blown polyurethane foam, is presented. By extending a kinetics‐based approach by adding bubble‐scale information via a population balance equation (PBE) using the quadrature method of moments, we can track bubble size distributions during foaming. We present results from a three‐dimensional computational fluid dynamics model using arbitrary Lagrangian–Eulerian interface tracking implemented in finite element software. The model compares favorably with experimental data, including dynamics, bubble distributions measured by both camera and diffusion wave spectroscopy, and post‐test bubble size from scanning electron microscopy and density measurements from x‐ray computed tomography.
Ortiz, Weston↗
Analysis of the sludge batch 9 (Macrobatch 10) DWPF pour stream glass sample
A pour stream (PS) sample taken during processing of Sludge Batch 8 (SB8, Macrobatch 10) was analyzed by Savannah River National Laboratory (SRNL) to verify compliance with the Defense Waste Processing Facility (DWPF) Glass Product Control Program. The following conclusions were drawn from these analyses; The sum of oxides for the SB8 PS glass (97.41 wt%) is within the Product Composition Control System (PCCS) limits (100 ± 5 wt%); The average Waste Dilution Factor (WDF) calculated from the Tank 40 dried sludge analysis results for SB8 is 1.9 ± 0.1. In general, the radionuclide concentration of the SB8 PS glass sample calculated using this WDF is in good agreement with the measured radionuclide content; The Product Consistency Test (PCT) results indicate that the SB8 PS glass meets the Waste Acceptance Product Specifications (WAPS) for durability, with normalized release rates for boron, lithium and sodium all at least two standard deviations lower than those of the Environmental Assessment (EA) glass; The average measured density of the SB8 PS glass is 2.72 g/cm 3 , consistent with previous PS samples; and, The average measured Fe 2+ /ΣFe ratio of the SB8 PS glass is 0.15, within the target range of 0.09- 0.33, and closely resembling the predicted REDOX value of 0.15.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Ionospheres and radio physics
Rocket and satellite electron density measurements for radiophysics and planetary ionosphere study
IONOSPHERIC ELECTRON DENSITY↗
A method of determining spectral dye densities in color films
A mathematical analysis technique called characteristic vector analysis, reported by Simonds (1963), is used to determine spectral dye densities in multiemulsion film such as color or color-IR imagery. The technique involves examining a number of sets of multivariate data and determining linear transformations of these data to a smaller number of parameters which contain essentially all of the information contained in the original set of data. The steps involved in the actual procedure are outlined. It is shown that integral spectral density measurements of a large number of different color samples can be accurately reconstructed from the calculated spectral dye densities.
Friederichs, G. A.↗