SEARCH · Engineering Papers

Results for “data compression techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Computation and analysis of a cylinder wake flow

The Karman vortex wake of a circular cylinder at low Reynolds number was computed by a time-accurate, two-dimensional compressible Navier-Stokes equation solver which uses the MacCormack predictor-corrector finite-difference scheme and a nonreflecting boundary condition on the outer flow boundary. The results from a large number of time steps were analyzed using Fast Fourier Transform techniques to identify the important frequency components for comparison with published experimental data. A strong low-frequency component was found below the vortex shedding frequency and not harmonically related to it. The experimentally discovered low-frequency fluctuations in the cylinder wake are considered possibly to be precursors to transition from laminar to turbulent flow conditions. The present finding of similar frequencies in a computed wake tends to confirm their existence as a real wake phenomenon. This computational work provides a complementary means to experimental investigations of wake phenomena.

Townsend, J. C.↗

DOE OSTI2021

Acoustic velocities, elasticity, and pressure-induced elastic softening in compressed neodymium

For the first time, the acoustic velocities and elasticity of double hexagonal close-packed neodymium (Nd) were measured at high pressure using ultrasonic interferometry in conjunction with synchrotron X-ray techniques. Here, both the compressional and shear wave velocities increased with an increase in pressure of up to ~5.4 GPa before they exhibited almost constant values upon further compression. This pressure-induced elastic wave velocity softening can be attributed to the structural instability in dhcp-Nd. From the current sound velocities and density data, we obtained new bulk and shear moduli as well as their pressure dependence for polycrystalline dhcp-Nd, yielding $B_0$=33.2(9) GPa, $G_0$=14.1(5) GPa, $\partial$$B/$$\partial$$P$ = 3.6 (4) and $\partial$$=G/$$\partial$$P$ = 1.3 (2) while other elasticity-related/mechanical properties, including Young's modulus, Debye temperature, Poisson's ratio, and Grüneisen parameter, which are important parameters for the application of Nd in extreme environments, were also derived.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Direct numerical simulation of hypersonic turbulent boundary layers: effect of spatial evolution and Reynolds number

Direct numerical simulations (DNS) are performed to investigate the spatial evolution of flat-plate zero-pressure-gradient turbulent boundary layers over long streamwise domains ( >300δ i , with δ i the inflow boundary-layer thickness) at three different Mach numbers, 2.5, 4.9 and 10.9, with the surface temperatures ranging from quasiadiabatic to highly cooled conditions. The settlement of turbulence statistics into a fully developed equilibrium state of the turbulent boundary layer has been carefully monitored, either based on the satisfaction of the von Kármán integral equation or by comparing runs with different inflow turbulence generation techniques. The generated DNS database is used to characterize the streamwise evolution of multiple important variables in the high-Mach-number, cold-wall regime, including the skin friction, the Reynolds analogy factor, the shape factor, the Reynolds stresses, and the fluctuating wall quantities. The data confirm the validity of many classic and newer compressibility transformations at moderately high Reynolds numbers (up to friction Reynolds number Re τ ≈1200 ) and show that, with proper scaling, the sizes of the near-wall streaks and superstructures are insensitive to the Mach number and wall cooling conditions. The strong wall cooling in the hypersonic cold-wall case is found to cause a significant increase in the size of the near-wall turbulence eddies (relative to the boundary-layer thickness), which leads to a reduced-scale separation between the large and small turbulence scales, and in turn to a lack of an outer peak in the spanwise spectra of the streamwise velocity in the logarithmic region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Femtosecond diffraction and dynamic high pressure science

Solid-state material at high pressure is prevalent throughout the Universe, and an understanding of the structure of matter under such extreme conditions, gleaned from x-ray diffraction, has been pursued for the best part of a century. The highest pressures that can be reached to date (2 TPa) in combination with x-ray diffraction diagnosis have been achieved by dynamic compression via laser ablation. The past decade has witnessed remarkable advances in x-ray technologies, with novel x-ray Free-Electron-Lasers (FELs) affording the capacity to produce high quality single-shot diffraction data on timescales below 100 fs. We provide a brief history of the field of dynamic compression, spanning from when the x-ray sources were almost always laser-plasma based, to the current state-of-the art diffraction capabilities provided by FELs. We give an overview of the physics of dynamic compression, diagnostic techniques, and the importance of understanding how the rate of compression influences the final temperatures reached. We provide illustrative examples of experiments performed on FEL facilities that are starting to give insight into how materials deform at ultrahigh strain rates, their phase diagrams, and the types of states that can be reached. We emphasize that there often appear to be differences in the crystalline phases observed between the use of static and dynamic compression techniques. We give our perspective on both the current state of this rapidly evolving field and some glimpses of how we see it developing in the near-to-medium term.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1993

Instantaneous velocity field imaging instrument for supersonic reacting flows

The technical tasks conducted to develop and demonstrate a new gas velocity measurement technique for high enthalpy reacting flows is described. The technique is based on Doppler-shifted Planar Laser-induced Fluorescence (PLIF) imaging of the OH radical. The imaging approach permits, in principle, single-shot measurements of the 2-D distribution of a single velocity component in the measurement plane, and is thus a technique of choice for applications in high enthalpy transient flow facilities. In contrast to previous work in this area, the present program demonstrated an approach which modified the diagnostic technique to function under the constraints of practical flow conditions of engineering interest, rather than vice-versa. In order to accomplish the experimental demonstrations, the state-of-the-art in PLIF diagnostic techniques was advanced in several ways. Each of these tasks is described in detail and is intended to serve as a reference in supporting the transition of this new capability to the fielded PLIF instruments now installed at several national test facilities. Among the new results of general interest in LlF-based flow diagnostics, a detailed set of the first measurements of the collisional broadening and shifting behavior of OH (1,0) band transitions in H7-air combustion environments is included. Such measurements are critical in the design of a successful strategy for PLIF velocity imaging; they also relate to accurate concentration and temperature measurements, particularly in compressible flow regimes. Furthermore, the results shed new light on the fundamental relationship between broadening and energy transfer collisions in OH A(sup 2)Sigma(+)v(sup ') = 1. The first single-pulse, spectrally-resolved measurements of the output of common pulsed dye lasers were also produced during the course of this effort. As with the OH broadening measurements, these data are a significant aspect of a successful velocity imaging strategy, and also have potential implications for many other LIF measurement techniques. Our results indicated the need to modify the commercially available laser cavity in order to accommodate the constraints imposed by typical SCRAMJET combustion characteristics as well as to increase the instrument's velocity dynamic range to span an intra-image range in excess of 2 km/s. The various technical efforts were brought together in a series of experiments demonstrating the applicability of the technique in a high pressure, high temperature H2-air combustion system. The resultant images were compared with 2-D flow simulations in order to determine the accuracy of the instrument. Mean velocity imaging in flows with an axis of symmetry was demonstrated with an accuracy of +/- 50 m/s out of an intra-image dynamic range of 1600 m/s, including reversed flow. A more complex configuration amenable to single-shot imaging in flows without an axis of symmetry was also demonstrated. Limitations imposed by available equipment resulted in an accuracy of about +/- 200 m/s out of 1750 m/s in these demonstrations. Minor modifications to the present configuration were suggested to improve this performance. Each technical task is described in detail, along with significance of the results for the overall imaging velocimeter configuration. This report should allow the user community to integrate this new measurement capability in their existing instrumentation platforms.

Allen, M. G.↗

DOE OSTI2020

The Complicated Link Between Material Properties and Microfracture Density for an Underground Explosion in Granite

Geophysical techniques are often implemented as quick and inexpensive ways to locate and characterize fractures in the subsurface, which is important for a number of geoscience fields. Seismic velocities are the most widely used proxies for identification of fractures, but the correlation is not always well-defined. In this study we present material property data: unconfined compressive strength (UCS), bulk density (ρ), Young's modulus (E), Poisson's ratio (ν), P wave velocity (V p ), and S wave velocity (V s ), in conjunction with microfracture densities measured on samples of granite collected before and after underground chemical explosions. Results indicate the relationship between fractures and material properties is complex, even in this single-lithology environment. We interpret that this complexity arises from varying fracture mechanisms (e.g. dilation-inducing fractures vs compression-inducing fractures) in different parts of the core, due to differences in stress conditions. Additional complexity may result from chemical interactions between the fresh fractures and the fluids in the area. Water content appears to have a significant, if not dominant, role in the unconfined compressive strength (UCS) of the samples. We suggest caution when using elastic property measurements as a proxy for fracturing in areas of explosion-induced damage, or in other areas where a variety of mechanisms induce fracturing.

58 GEOSCIENCES↗

DOE OSTI2020

Isotope effects on the high pressure viscosity of liquid water measured by differential dynamic microscopy

In this paper, differential dynamic microscopy is performed in diamond anvil cells to measure the viscosity of water along the 24 °C isotherm to high-pressure by determination of the tracer diffusion coefficient of monodisperse silica spheres of known diameter and application of the Stokes-Einstein-Sutherland equation. This technique allows liquid samples to be compressed to greater pressure prior to freezing than with other viscometry methods. The highest-pressure measurement was made at 1.67 GPa, considerably deeper into the supercompressed regime than previously reported. The effect of isotopic composition is investigated with samples of normal water, heavy water, and partially deuterated water. When data below 0.25 GPa are excluded a free volume model fits the observed viscosities well yielding a theoretical glass transition density close to that observed in very-high-density amorphous ice. The improved fit above 0.25 GPa coincides with the loss of other anomalous behaviors in liquid water caused by hydrogen bonding and represents a transition to properties closer to those of a simple liquid.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS1979

The solution of the three-dimensional viscous-compressible Navier-Stokes equations on a vector computer

The development of a vectorized computer code for the solution of the three-dimensional viscous-compressible Navier-Stokes equations is described. The code is applied on the CDC STAR-100 vector computer which is capable of achieving high result rates when a high degree of parallelism is present in the computations. The computational technique is an explicit time-split MacCormack predictor-corrector algorithm. Since a large volume of data is processed and virtual memory utilized, a data management scheme based on interleaving is used. The program has been applied to obtain the solution of the laminar supersonic flow about a family of three-dimensional corners. The equations of motion are expressed in a generalized form relative to a uniform rectangular computational domain. The metric coefficient and boundary conditions must be supplied for the corresponding physical domain. For calculations with 30,000 grid points, a computational rate of 0.00015 seconds per grid point per time step is observed.

Smith, R. E.↗

NASA NTRS1983

Calculation of afterbody flows with a composite velocity formulation

A recently developed technique for numerical solution of the Navier-Stokes equations for subsonic, laminar flows is investigated. It is extended here to allow for the computation of transonic and turbulent flows. The basic approach involves a multiplicative composite of the appropriate velocity representations for the inviscid and viscous flow regions. The resulting equations are structured so that far from the surface of the body the momentum equations lead to the Bernoulli equation for the pressure, while the continuity equation reduces to the familiar potential equation. Close to the body surface, the governing equations and solution techniques are characteristic of those describing interacting boundary layers. The velocity components are computed with a coupled strongly implicity procedure. For transonic flows the artificial compressibility method is used to treat supersonic regions. Calculations are made for both laminar and turbulent flows over axisymmetric afterbody configurations. Present results compare favorably with other numerical solutions and/or experimental data.

Swanson, R. C.↗

NASA NTRS2010

A New Compression Method for FITS Tables

As the size and number of FITS binary tables generated by astronomical observatories increases, so does the need for a more efficient compression method to reduce the amount disk space and network bandwidth required to archive and down1oad the data tables. We have developed a new compression method for FITS binary tables that is modeled after the FITS tiled-image compression compression convention that has been in use for the past decade. Tests of this new method on a sample of FITS binary tables from a variety of current missions show that on average this new compression technique saves about 50% more disk space than when simply compressing the whole FITS file with gzip. Other advantages of this method are (1) the compressed FITS table is itself a valid FITS table, (2) the FITS headers remain uncompressed, thus allowing rapid read and write access to the keyword values, and (3) in the common case where the FITS file contains multiple tables, each table is compressed separately and may be accessed without having to uncompress the whole file.

Pence, William↗

DOE OSTI2022

A lightweight, user-configurable detector ASIC digital architecture with on-chip data compression for MHz X-ray coherent diffraction imaging

Today, most X-ray pixel detectors used at light sources transmit raw pixel data off the detector ASIC. With the availability of more advanced ASIC technology nodes for scientific application, more digital functionalities from the computing domains (e.g., compression) can be integrated directly into a detector ASIC to increase data velocity. In this paper, we describe a lightweight, user-configurable detector ASIC digital architecture with on-chip compression which can be implemented in 130 nm technologies in a reasonable area on the ASIC periphery. In addition, we present a design to efficiently handle the variable data from the stream of parallel compressors. The architecture includes user-selectable lossy and lossless compression blocks. The impact of lossy compression algorithms is evaluated on simulated and experimental X-ray ptychography datasets. This architecture is a practical approach to increase pixel detector frame rates towards the continuous 1 MHz regime for not only coherent imaging techniques such as ptychography, but also for other diffraction techniques at X-ray light sources.

47 OTHER INSTRUMENTATION↗

NASA NTRS1974

Advanced beaded and tubular structural panels. Volume 2: Fabrication

A study was conducted to exploit the efficiency of curved elements in the design of lightweight structural panels under combined loads of axial compression, inplane shear, and bending. A summary of the total program (analysis, fabrication and test) is presented in document NASA CR-2514. Detailed descriptions of the analysis effort and of the panel tests are contained in supplementary documents NASA CR-132460 and NASA-CR-132515 respectively. Data are also given on the development of economical fabrication techniques to minimize the effects of fabrication limitations on optimum panel designs.

Musgrove, M. D.↗

NASA NTRS1975

Numerical solutions for supersonic corner flow

Analytical solutions for inviscid supersonic corner flows are virtually nonexistent due to the complexity of the interference geometry. In view of this, numerical solutions for swept-compressive and swept-expansive corner flows are obtained. The governing equations are written in strong conservation-law form and are solved iteratively in nonorthogonal conical coordinates by use of a second-order, shock-capturing, finite-difference technique. The computed wave structure and surface pressure distributions are compared with high Reynolds number experimental data and show very good agreement. The results clearly show that supersonic corner flow at reasonably high Reynolds numbers including the effect of sweep is dominated by the inviscid field.

Shankar, V.↗

NASA NTRS1989

Digital CODEC for real-time processing of broadcast quality video signals at 1.8 bits/pixel

Advances in very large-scale integration and recent work in the field of bandwidth efficient digital modulation techniques have combined to make digital video processing technically feasible and potentially cost competitive for broadcast quality television transmission. A hardware implementation was developed for a DPCM-based digital television bandwidth compression algorithm which processes standard NTSC composite color television signals and produces broadcast quality video in real time at an average of 1.8 bits/pixel. The data compression algorithm and the hardware implementation of the CODEC are described, and performance results are provided.

Shalkhauser, Mary JO↗

NASA NTRS1989

Large scale advanced propeller blade pressure distributions - Prediction and data

Two Euler analysis techniques, finite difference and finite volume, are employed to predict the blade surface pressure distributions of a large scale advanced propeller. The predicted pressure distributions are compared with wind tunnel data. Both techniques produced blade pressure distributions which are in fairly good agreement with the data over the range of test Mach numbers of 0.2 to 0.78. However, the numerical simulations fail to predict correctly the measured pressure distributions for the low Mach number, high power case which seem to have a leading edge vortex. A discussion of the compressibility effects is also presented.

Nallasamy, M.↗

NASA NTRS2005

Wake Vortex Tracking Using a 35 GHz Pulsed Doppler Radar

A 35 GHz, pulsed-Doppler radar system has been designed and assembled for wake vortex detection and tracking in low visibility conditions. Aircraft wake vortices continue to be an important factor in determining safe following distances or spacings for aircraft in the terminal area. Currently, under instrument meteorological conditions (IMC), aircraft adhere to conservative, fixed following-distance guidelines based primarily on aircraft weight classifications. When ambient conditions are such that vortices will either drift or dissipate, leaving the flight corridor clear, the prescribed spacings are unnecessarily long and result in decreased airport throughput. There is a potential for significant airport efficiency improvement, if a system can be employed to aid regulators and pilots in setting safe and efficient following distances based on airport conditions. The National Aeronautics and Space Administration (NASA), the Federal Aviation Agency, and Volpe National Transportation Systems Center have promoted and worked to develop systems that would increase airport capacity and provide for safe reductions in aircraft separation. The NASA Aircraft Vortex Spacing System (AVOSS), a wake vortex spacing system that can provide dynamic adjustment of spacings based on real-time airport weather conditions, has demonstrated that Lidar systems can be successfully used to detect and track vortices in clear air conditions. To fill the need for detection capability in low-visibility conditions, a 35 GHz, pulsed-Doppler radar system is being investigated for use as a complimentary, low-visibility sensor for wake vortices. The radar sensor provides spatial and temporal information similar to that provided by Lidar, but under weather conditions that a Lidar cannot penetrate. Currently, we are analyzing the radar design based upon the data and experience gained during the wake vortex Lidar deployment with AVOSS at Dallas/Fort Worth International Airport. As part of this study, two numerical models were utilized in system simulations. The results of this study improve our understanding of the method of detection, resolution requirements for range and azimuth, pulse compression, and performance prediction. Simulations applying pulse compression techniques show that detection is good in heavy fog to greater than 2000 m. Both compressed and uncompressed short pulses show the vortex structure. To explore operational challenges, siting and scanning strategies were also analyzed. Simulation results indicate that excellent wake vortex detection, tracking and classification is possible in drizzle (+15 dBZ) and heavy fog (- 13 dBZ) using short pulse techniques (<99ns) at ranges on the order of 900 m, with a modest power of 500 W output. At 1600 m, detection can be expected at reflectivities as low as -13 dBZ (heavy fog). The radar system, as designed and built, has the potential to support field studies of a wake vortex spacing system in low-visibility conditions ranging from heavy fog to rain, when sited within 2000m of the flight path.

Neece, Robert T.↗

NASA NTRS1997

Colloids and Nucleation

The objectives of the work funded under this grant were to develop a microphotographic technique and use it to monitor the nucleation and growth of crystals of hard colloidal spheres. Special attention is given to the possible need for microgravity studies in future experiments. A number of persons have been involved in this work. A masters student, Keith Davis, began the project and developed a sheet illumination apparatus and an image processing system for detection and analysis. His work on a segmentation program for image processing was sufficient for his master's research and has been published. A post doctoral student Bernie Olivier and a graduate student Yueming He, who originally suggested the sheet illumination, were funded by another source but along with Keith made photographic series of several samples (that had been made by Keith Davis). Data extraction has been done by Keith, Bernie, Yueming and two undergraduates employed on the grant. Results are published in Langmuir. These results describe the sheet lighting technique as one which illuminates not only the Bragg scattering crystal, but all the crystals. Thus, accurate crystal counts can be made for nucleation rate measurements. The strange crystal length scale reduction, observed in small angle light scattering (SALS) studies, following the initial nucleation and growth period, has been observed directly. The Bragg scattering (and dark) crystal size decreases in the crossover region. This could be an effect due to gravitational forces or due to over- compression of the crystal during growth. Direct observations indicate a complex morphology for the resulting hard sphere crystals. The crystal edges are fairly sharp but the crystals have a large degree of internal structure. This structure is a result of (unstable) growth and not aggregation. As yet unpublished work compares growth exponents data with data obtained by SALS. The nucleation rate density is determined over a broad volume fraction range (0.505 to 0.575) and compared to classical nucleation rate calculations. The experimental nucleation rate density varies with volume fraction more slowly than expected theoretically. Gravity may influence nucleation because crystal nuclei are more dense than the surrounding fluid and may be gravitationally convected. The largest observed crystal size was near volume fraction 0.52. Near the freezing point, crystals should grow to large size because nuclei are sparse and there is plenty of room to grow without contacting other crystals. Near melting the opposite is true, with crystals growing into one another shortly after nucleation. The maximum crystal size seen near 0.52 volume fraction suggests that gravitational stresses are limiting crystal growth near freezing.

Ackerson, Bruce↗

NASA NTRS1997

Image Data Compression Having Minimum Perceptual Error

A method is presented for performing color or grayscale image compression that eliminates redundant and invisible image components. The image compression uses a Discrete Cosine Transform (DCT) and each DCT coefficient yielded by the transform is quantized by an entry in a quantization matrix which determines the perceived image quality and the bit rate of the image being compressed. The quantization matrix comprises visual masking by luminance and contrast technique all resulting in a minimum perceptual error for any given bit rate, or minimum bit rate for a given perceptual error.

Watson, Andrew B.↗