Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Evaluation of change detection techniques for monitoring coastal zone environments

Procedures for detecting changes in Landsat multispectral scanning imagery of coastal zone environments are discussed. Four detection procedures are examined: a comparison of independently produced spectral classifications; a classification of a multispectral difference data set; a single analysis of a multidate data set; and a maximum likelihood classification using multistage decision logic. The relatively complex maximum likelihood classification technique was found to yield results closest to those obtained with the comparison of independently produced spectral classifications, the chosen standard.

Weismiller, R. A.↗
NASA NTRS1992

Classification with spatio-temporal interpixel class dependency contexts

A contextual classifier which can utilize both spatial and temporal interpixel dependency contexts is investigated. After spatial and temporal neighbors are defined, a general form of maximum a posterior spatiotemporal contextual classifier is derived. This contextual classifier is simplified under several assumptions. Joint prior probabilities of the classes of each pixel and its spatial neighbors are modeled by the Gibbs random field. The classification is performed in a recursive manner to allow a computationally efficient contextual classification. Experimental results with bitemporal TM data show significant improvement of classification accuracy over noncontextual pixelwise classifiers. This spatiotemporal contextual classifier should find use in many applications of remote sensing, especially when the classification accuracy is important.

Jeon, Byeungwoo↗
NASA NTRS2001

Evaluating the Synergistic Use of Low-Altitude AVIRIS and AIRSAR Data for Land Cover Mapping in Northeast Yellowstone National Park

Current land cover maps are needed by Yellowstone National Park (YNP) managers to assist them in protecting and preserving native flora and fauna. Synergistic use of hyperspectral and radar imagery offers great promise for mapping habitat in terms of cover type composition and structure. In response, a study was conducted to assess the utility of combining low-altitude AVIRIS and AIRSAR data for mapping land cover in a portion of northeast YNP. Land cover maps were produced from individual AVIRIS and AIRSAR data sets, as well as from a hybrid data stack of selected AVIRIS and AIRSAR data bands. The three resulting classifications were compared to field survey data and aerial photography to assess apparent benefits of hyperspectral/SAR data fusion for land cover mapping. Preliminary results will be presented.

Berglund, Judith↗
NASA NTRS1984

Impact of LANDSAT MSS Sensor Differences on Change Detection Analysis

Change detection techniques were used to pinpoint differences in the multispectral band scanners on LANDSAT 2, 3, and 4 satellites. The method of analysis was to co-register 512 by 512 pixel subwindows for all data pairs followed by scattergram generation and analysis. In all cases, the LANDSAT-4 data were used as the base to which other images were registered. There appear to be no major problems preventing use of LANDSAT-4 MSS with previous MSS sensors for charge detection, provided the interference noise can be removed or minimized. This noise may result in detection of spurious changes, as well as affect other uses of the data, including image classification. Analysis of dark (water and forests), rather than light features will be most impacted because the noise will form a higher percentage of the total response at low DN values. Any data normalizations for change detection should be based upon the data, rather than solely upon calibration information. While the observed relative radiometric transfer function between LANDSAT 3 and 4 was approximately as predicted, there were still significant deviations. Normalizing based upon data content also can have the advantage of allowing simultaneous normalization of the atmosphere as well as the radiometry.

Likens, W. C.↗
NASA NTRS1989

Combining multispectral and ancillary data in remote sensing using interval-valued probabilities

This paper presents a method for classifying multisource data in remote sensing and geographic information systems using interval-valued probabilities. In this method, each data source is considered as an information source which provides a body of statistical evidence. In order to integrate information obtained from multiple data sources, the method adopts Dempster's rule for combining multiple bodies of evidence. Preliminary experiments have been undertaken to illustrate the use of the method in a supervised ground-cover classification on multispectral data combined with digital elevation data. They demonstrate the ability of the method in capturing information provided by inexact and incomplete evidence when there are not enough training samples to estimate statistical parameters.

Kim, H.↗
NASA NTRS2013

Aerodynamic Classification of Swept-Wing Ice Accretion

The continued design, certification and safe operation of swept-wing airplanes in icing conditions rely on the advancement of computational and experimental simulation methods for higher fidelity results over an increasing range of aircraft configurations and performance, and icing conditions. The current state-of-the-art in icing aerodynamics is mainly built upon a comprehensive understanding of two-dimensional geometries that does not currently exist for fundamentally three-dimensional geometries such as swept wings. The purpose of this report is to describe what is known of iced-swept-wing aerodynamics and to identify the type of research that is required to improve the current understanding. Following the method used in a previous review of iced-airfoil aerodynamics, this report proposes a classification of swept-wing ice accretion into four groups based upon unique flowfield attributes. These four groups are: ice roughness, horn ice, streamwise ice, and spanwise-ridge ice. For all of the proposed ice-shape classifications, relatively little is known about the three-dimensional flowfield and even less about the effect of Reynolds number and Mach number on these flowfields. The classifications and supporting data presented in this report can serve as a starting point as new research explores swept-wing aerodynamics with ice shapes. As further results are available, it is expected that these classifications will need to be updated and revised.

Broeren, Andy↗
NASA NTRS2013

Aerodynamic Classification of Swept-Wing Ice Accretion

The continued design, certification and safe operation of swept-wing airplanes in icing conditions rely on the advancement of computational and experimental simulation methods for higher fidelity results over an increasing range of aircraft configurations and performance, and icing conditions. The current stateof- the-art in icing aerodynamics is mainly built upon a comprehensive understanding of two-dimensional geometries that does not currently exist for fundamentally three-dimensional geometries such as swept wings. The purpose of this report is to describe what is known of iced-swept-wing aerodynamics and to identify the type of research that is required to improve the current understanding. Following the method used in a previous review of iced-airfoil aerodynamics, this report proposes a classification of swept-wing ice accretion into four groups based upon unique flowfield attributes. These four groups are: ice roughness, horn ice, streamwise ice and spanwise-ridge ice. In the case of horn ice it is shown that a further subclassification of "nominally 3D" or "highly 3D" horn ice may be necessary. For all of the proposed ice-shape classifications, relatively little is known about the three-dimensional flowfield and even less about the effect of Reynolds number and Mach number on these flowfields. The classifications and supporting data presented in this report can serve as a starting point as new research explores swept-wing aerodynamics with ice shapes. As further results are available, it is expected that these classifications will need to be updated and revised.

Diebold, Jeff M.↗
NASA NTRS2013

Aerodynamic Classification of Swept-Wing Ice Accretion

The continued design, certification and safe operation of swept-wing airplanes in icing conditions rely on the advancement of computational and experimental simulation methods for higher fidelity results over an increasing range of aircraft configurations and performance, and icing conditions. The current state-of-the-art in icing aerodynamics is mainly built upon a comprehensive understanding of two-dimensional geometries that does not currently exist for fundamentally three-dimensional geometries such as swept wings. The purpose of this report is to describe what is known of iced-swept-wing aerodynamics and to identify the type of research that is required to improve the current understanding. Following the method used in a previous review of iced-airfoil aerodynamics, this report proposes a classification of swept-wing ice accretion into four groups based upon unique flowfield attributes. These four groups are: ice roughness, horn ice, streamwise ice and spanwise-ridge ice. In the case of horn ice it is shown that a further subclassification of nominally 3D or highly 3D horn ice may be necessary. For all of the proposed ice-shape classifications, relatively little is known about the three-dimensional flowfield and even less about the effect of Reynolds number and Mach number on these flowfields. The classifications and supporting data presented in this report can serve as a starting point as new research explores swept-wing aerodynamics with ice shapes. As further results are available, it is expected that these classifications will need to be updated and revised.

Diebold, Jeff M.↗
NASA NTRS1984

Comparison of Land Cover Information from LANDSAT Multispectral Scanner (MSS) and Airborne Thematic Mapper Simulator (TMS) Data for Hydrologic Applications

Detailed land cover classifications were performed on the Thematic Mapper Simulator (TMS) and MSS data of the Clinton River Basin (acquired on August 19, 1981, and June 28, 1980, respectively) using supervised classification techniques. Differences in interclass separability were compared to select several promising TMS band combinations, selected from the 27 covering the Clinton River Basin. The TMS data produced a more accurate and spatially contiguous classification than MSS for this study site. While the accuracy of the 4-band TM data set was as good as the 7-band, the 3-band TMS data sets were also better than the MSS. These results indicate that both the increased spectral discrimination and spatial resolution contribute to improved classification accuracy. The possibility of reducing the data analysis burden associated with large TM data volumes through effective band selection therefore appears promising. The implications of the improved classification accuracy of TMS data are important for hydrologic and economic modeling. In particular, the higher accuracies for the developed categories (residential and commercial) should improve the predictions of runoff in flood forecasting models and of flood damage for damage calculation models appreciably.

Gervin, J. C.↗
DOE OSTI2026

Machine learning approaches for crystallographic classification from synthetic 2D X-ray diffraction data

Crystallographic structure identification is crucial for understanding material properties; however, current methodologies often depend on labor-intensive and time-consuming analyses of 2D X-ray diffraction (XRD) patterns. To address these limitations, this study employs synthetic 2D XRD patterns combined with deep learning (DL) techniques to enable automated and high-throughput classification of the seven crystal systems and 230 space groups. We introduce the novel Auto Diffraction Pipeline, designed to generate synthetic 2D XRD spot patterns from crystallographic information files under diverse conditions, including varying zone axes, atomic substitution, atomic depletion and mechanical loading. These conditions enhance the realism of synthetic data, mitigating the scarcity of experimental datasets and enabling the creation of large representative training sets. Convolutional neural networks were trained and validated on these synthetic datasets to classify crystallographic structures across multiple scenarios. Our results demonstrate that integrating synthetic 2D XRD patterns with DL facilitates rapid, accurate and automated crystallographic classification, promoting the wider adoption of data-driven approaches in materials science.

Shahnazari, Ayoub [Univ. of Rochester, NY (United ↗
NASA NTRS1995

Accurate estimation of sigma(exp 0) using AIRSAR data

During recent years signature analysis, classification, and modeling of Synthetic Aperture Radar (SAR) data as well as estimation of geophysical parameters from SAR data have received a great deal of interest. An important requirement for the quantitative use of SAR data is the accurate estimation of the backscattering coefficient sigma(exp 0). In terrain with relief variations radar signals are distorted due to the projection of the scene topography into the slant range-Doppler plane. The effect of these variations is to change the physical size of the scattering area, leading to errors in the radar backscatter values and incidence angle. For this reason the local incidence angle, derived from sensor position and Digital Elevation Model (DEM) data must always be considered. Especially in the airborne case, the antenna gain pattern can be an additional source of radiometric error, because the radar look angle is not known precisely as a result of the the aircraft motions and the local surface topography. Consequently, radiometric distortions due to the antenna gain pattern must also be corrected for each resolution cell, by taking into account aircraft displacements (position and attitude) and position of the backscatter element, defined by the DEM data. In this paper, a method to derive an accurate estimation of the backscattering coefficient using NASA/JPL AIRSAR data is presented. The results are evaluated in terms of geometric accuracy, radiometric variations of sigma(exp 0), and precision of the estimated forest biomass.

Holecz, Francesco↗
DOE OSTI2025

JGI-Trichoderma v1.0

There is a series of Python and bash scripts to parse genomics datasets used to evaluate the coevolution of gene families and the feature importance of gene families using an SVM classifier. - Cover analysis: takes a list of single-copy genes in a set of genomes, aligns and builds the gene trees to determine if two gene families have a signature of covariation with one another. It parses the files to run phykit cover script described here: https://jlsteenwyk.com/PhyKIT/usage/index.html - SVM-classifier: This Python script is an SVM-based genomic classifier designed for biological data analysis. It combines machine learning with feature selection to identify important genomic markers and classify biological samples. Core Functionality: The script uses Support Vector Machines from scikit-learn to classify genomic data, incorporating SelectKBest for automated feature selection and leave-one-out cross-validation for performance assessment. It operates in multiple modes: feature ranking, optimal combination discovery, and sample prediction. Primary Applications: Genomic sample classification and biomarker discovery Feature importance analysis in high-dimensional biological datasets Prediction of sample categories based on genomic profiles Research applications requiring robust classification of biological data Key Advantages: High-dimensional handling: SVMs excel with genomic data's typical high feature-to-sample ratios Integrated feature selection: Reduces noise and computational overhead while identifying key markers Probability estimation: Provides confidence scores essential for biological interpretation Validation robustness: Leave-one-out cross-validation ensures reliable performance metrics Operational flexibility: Multiple analysis modes support different research phases from exploration to prediction

Stecca Steindorff, Andrei [Lawrence Berkeley Natio↗
NASA NTRS1981

FOCIS: A forest classification and inventory system using LANDSAT and digital terrain data

Accurate, cost-effective stratification of forest vegetation and timber inventory is the primary goal of a Forest Classification and Inventory System (FOCIS). Conventional timber stratification using photointerpretation can be time-consuming, costly, and inconsistent from analyst to analyst. FOCIS was designed to overcome these problems by using machine processing techniques to extract and process tonal, textural, and terrain information from registered LANDSAT multispectral and digital terrain data. Comparison of samples from timber strata identified by conventional procedures showed that both have about the same potential to reduce the variance of timber volume estimates over simple random sampling.

Strahler, A. H.↗