SEARCH · Engineering Papers

Results for “data analysis methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Improving the Aircraft Design Process Using Web-Based Modeling and Simulation

Designing and developing new aircraft systems is time-consuming and expensive. Computational simulation is a promising means for reducing design cycle times, but requires a flexible software environment capable of integrating advanced multidisciplinary and multifidelity analysis methods, dynamically managing data across heterogeneous computing platforms, and distributing computationally complex tasks. Web-based simulation, with its emphasis on collaborative composition of simulation models, distributed heterogeneous execution, and dynamic multimedia documentation, has the potential to meet these requirements. This paper outlines the current aircraft design process, highlighting its problems and complexities, and presents our vision of an aircraft design process using Web-based modeling and simulation.

Reed, John A.↗

NASA NTRS2003

Improving the Aircraft Design Process Using Web-based Modeling and Simulation

Designing and developing new aircraft systems is time-consuming and expensive. Computational simulation is a promising means for reducing design cycle times, but requires a flexible software environment capable of integrating advanced multidisciplinary and muitifidelity analysis methods, dynamically managing data across heterogeneous computing platforms, and distributing computationally complex tasks. Web-based simulation, with its emphasis on collaborative composition of simulation models, distributed heterogeneous execution, and dynamic multimedia documentation, has the potential to meet these requirements. This paper outlines the current aircraft design process, highlighting its problems and complexities, and presents our vision of an aircraft design process using Web-based modeling and simulation.

Reed, John A.↗

NASA NTRS2002

Program of Research in Flight Dynamics in The George Washington University at NASA Langley Research Center, Hampton, Virginia

The program objectives were defined in the original proposal entitled 'Program of Research in Flight Dynamics in the JIAFS at NASA Langley Research Center' which was originated March 20, 1975, and yearly renewals of the research program dated December 1, 1998 to December 31, 2002. The program included three major topics: 1) Improvement of existing methods and development of new methods for flight and wind tunnel data analysis based on system identification methodology; 2) Application of these methods to flight and wind tunnel data obtained from advanced aircraft; 3) Modeling and control of aircraft. The principal investigator of the program was Dr. Vladislav Klein, Professor Emeritus at The George Washington University, DC. Seven Graduate Research Scholar Assistants (GRSA) participated in the program. The results of the research conducted during four years of the total co-operative period were published in 2 NASA Technical Reports, 3 thesis and 3 papers. The list of these publications is included.

Klein, Vladislav↗

NASA NTRS2001

The Nature of the Vela Supernova Remnant as Revealed by O VI and C IV Absorption

Highly ionized gas, in particular C IV and O VI, is produced in the interstellar medium in regions with hot (T approx. 10(exp 6) K) X-ray emitting gas and at the boundaries where hot gas and cooler (T approx. 10(exp 4) K) gas interact. Supernova remnant shocks produce most of the hot gas in the ISM and, if they are in the correct range of speeds, should produce observable quantities of C IV and O VI absorption. In turn, the column densities of these ions are potentially powerful diagnostics of the shock speed and interstellar environment in which the SNR is evolving. With the advent of FUSE, the power of this diagnostic technique is now available. We have FUSE data toward 8 stars behind the Vela SNR, and have developed a data reduction and analysis method that produces reasonably reliable O VI column densities, in spite of the complexities of the FUSE spectra in this region. In order to gain insight into the observational results, the Vela SNR evolution was modelled using Piecewise Parabolic Method numerical hydrodynamics code. The code is 1-D and incorporates non-equilibrium ionization, radiative cooling, thermal conduction and magnetic pressure.

Lines, Nichols J.↗

NASA NTRS2007

A Catalog of Galaxy Clusters Observed by XMM-Newton

Images and the radial profiles of the temperature, abundance, and brightness for 70 clusters of galaxies observed by XMM-Newton are presented along with a detailed discussion of the data reduction and analysis methods, including background modeling, which were used in the processing. Proper consideration of the various background components is vital to extend the reliable determination of cluster parameters to the largest possible cluster radii. The various components of the background including the quiescent particle background, cosmic diffuse emission, soft proton contamination, and solar wind charge exchange emission are discussed along with suggested means of their identification, filtering, and/or their modeling and subtraction. Every component is spectrally variable, sometimes significantly so, and all components except the cosmic background are temporally variable as well. The distributions of the events over the FOV vary between the components, and some distributions vary with energy. The scientific results from observations of low surface brightness objects and the diffuse background itself can be strongly affected by these background components and therefore great care should be taken in their consideration.

Snowden, S. L.↗

NASA NTRS2010

Comparison of Analysis, Simulation, and Measurement of Wire-to-Wire Crosstalk

In this investigation, we compare crosstalk analysis, simulation, and measurement results for electrically short configurations. Methods include hand calculations, PSPICE simulations, Microstripes transient field solver, and empirical measurement. In total, four representative physical configurations are examined, including a single wire over a ground plane, a twisted pair over a ground plane, generator plus receptor wires inside a cylindrical conduit, and a single receptor wire inside a cylindrical conduit. Part 1 addresses the first two cases, and Part 2 addresses the final two. Agreement between the analysis methods and test data is shown to be very good.

Bradley, Arthur T.↗

NASA NTRS2011

Data Analysis And Polarization Measurements With GEMS

The Gravity and Extreme Magnetism SMEX (GEMS) mission was selected by NASA for flight in 2014. GEMS will make the first sensitive survey of X-ray polarization across a wide range of source classes including black hole and neutron star binaries, AGN of different types, rotation and accretion-powered pulsars, magnetars, shell supernova remnants and pulsar wind nebulae. GEMS employs grazing-incidence foil mirrors and novel time-projection chamber (TPC) polarimeters leveraging the photoelectric effect. The GEMS detectors image the charge tracks of photoelectrons produced by 2 - 10 keV X-rays. The initial direction of the photoelectron is determined by the linear polarization of the photon. We present an overview of the data analysis challenges and methods for GEMS, including procedures for producing optimally filtered images of the charge tracks and estimating their initial directions. We illustrate our methods using laboratory measurements of polarized and unpolarized X-rays with flight-like detectors as well as from simulated tracks. We also present detailed simulations exploring the statistics of polarization measurements appropriate for GEMS, and make comparisons with previous work.

Stohmayer, Tod↗

NASA NTRS2011

NASA Instrument Cost/Schedule Model

NASA's Office of Independent Program and Cost Evaluation (IPCE) has established a number of initiatives to improve its cost and schedule estimating capabilities. 12One of these initiatives has resulted in the JPL developed NASA Instrument Cost Model. NICM is a cost and schedule estimator that contains: A system level cost estimation tool; a subsystem level cost estimation tool; a database of cost and technical parameters of over 140 previously flown remote sensing and in-situ instruments; a schedule estimator; a set of rules to estimate cost and schedule by life cycle phases (B/C/D); and a novel tool for developing joint probability distributions for cost and schedule risk (Joint Confidence Level (JCL)). This paper describes the development and use of NICM, including the data normalization processes, data mining methods (cluster analysis, principal components analysis, regression analysis and bootstrap cross validation), the estimating equations themselves and a demonstration of the NICM tool suite.

JCL↗

NASA NTRS2015

Aircraft Engine Noise Research and Testing at the NASA Glenn Research Center

The presentation will begin with a brief introduction to the NASA Glenn Research Center as well as an overview of how aircraft engine noise research fits within the organization. Some of the NASA programs and projects with noise content will be covered along with the associated goals of aircraft noise reduction. Topics covered within the noise research being presented will include noise prediction versus experimental results, along with engine fan, jet, and core noise. Details of the acoustic research conducted at NASA Glenn will include the test facilities available, recent test hardware, and data acquisition and analysis methods. Lastly some of the actual noise reduction methods investigated along with their results will be shown.

Aeroacoustics↗

NASA NTRS2015

Climate-Induced Larch Growth Response Within the Central Siberian Permafrost Zone

Aim: estimation of larch (Larix gmelinii) growth response to current climate changes. Location: permafrost area within the northern part of Central Siberia (approximately 65.8 deg N, 98.5 deg E). Method: analysis of dendrochronological data, climate variables, drought index SPEI, GPP (gross primary production) and EVI vegetation index (both Aqua/MODIS satellite derived), and soil water content anomalies (GRACE satellite measurements of equivalent water thickness anomalies, EWTA). Results: larch tree ring width (TRW) correlated with previous year August precipitation (r = 0.63), snow accumulation (r = 0.61), soil water anomalies (r = 0.79), early summer temperatures and water vapor pressure (r = 0.73 and r = 0.69, respectively), May and June drought index (r = 0.68-0.82). There are significant positive trends of TRW since late 1980s and GPP since the year 2000. Mean TRW increased by about 50%, which is similar to post-Little Ice Age warming. TRW correlated with GPP and EVI of larch stands (r = 0.68-0.69). Main conclusions: within the permafrost zone of central Siberia larch TRW growth is limited by early summer temperatures, available water from snowmelt, water accumulated within soil in the previous year, and permafrost thaw water. Water stress is one of the limiting factors of larch growth. Larch TRW growth and GPP increased during recent decades.

permafrost thaw↗

NASA NTRS2015

Aircraft Engine Noise Research and Testing at the NASA Glenn Research Center

Aeroacoustics↗

NASA NTRSDate not supplied

XV-15 Tilt Rotor Research Aircraft Photogrammetry and Metrology Measurement

A new measurement capability was created by combining photogrammetry and metrology techniques to accurately measure one half of the XV-15 Tilt Rotor Research Aircraft at the Smithsonian’s Udvar-Hazy museum. The challenges imposed by the fuselage and surrounding environment at Udvar-Hazy were overcome by careful application of photogrammetry and metrology techniques. Data analyses and processing included the use of multiple reverse engineering programs to accurately generate a complete 3-dimensional water-tight geometry of the aircraft and rotor blade. This paper describes the photogrammetry and metrology measurement systems, technology and hardware set-up, data analysis and processing methods, future work, and lessons learned. In addition, selected measurement results of the fuselage and rotor blade are presented.

XV-15↗

DOE OSTI2024

Time series methods for the analysis of soundscapes and other cyclical ecological data

Biodiversity monitoring has entered an era of ‘big data’, exemplified by a near-continuous collection of sounds, images, chemical and other signals from organisms in diverse ecosystems. Such data streams have the potential to help identify new threats, assess the effectiveness of conservation interventions, as well as generate new ecological insights. However, appropriate analytical methods are often still missing, particularly with respect to characterizing cyclical temporal patterns. Here, we present a framework for characterizing and analysing ecological responses that represent nonstationary, complex temporal patterns and demonstrate the value of using Fourier transforms to decorrelate continuous data points. In our example, we use a framework based on three approaches (spectral analysis, magnitude squared coherence, and principal component analysis) to characterize differences in tropical forest soundscapes within and across sites and seasons in Gabon. By reconstructing the underlying, cyclic behaviour of the soundscape for each site, we show how one can identify circadian patterns in acoustic activity. Soundscapes in the dry season had a complex diel cycle, requiring multiple harmonics to represent daily variation, while in the wet season there was less variance attributable to the daily cyclic patterns. Our framework can be applied to most continuous, or near-continuous ecological data collected at a fine temporal resolution, allowing ecologists to explore patterns of temporal autocorrelation at multiple levels for biologically meaningful trends. Such methods will become indispensable as biological big data are used to understand the impact of anthropogenic pressures on biodiversity and to inform efforts to mitigate them.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1994

Topological analysis of chaotic orbits: Revisiting Hyperion

There is emerging interest in the possibility of chaotic evolution in astrophysical systems. To mention just one example, recent well-sampled ground-based observations of the Saturian satellite Hyperion strongly suggest that it is exhibiting chaotic behavior. We present a general technique, the method of close returns, for the analysis of data from astronomical objects believed to be exhibiting chaotic motion. The method is based on the extraction of pieces of the evolution that exhibit nearly periodic behavior-episodes during which the object stays near in phase space to some unstable periodic orbit. Such orbits generally act as skeletal features, tracing the topological organization of the manifold on which the chaotic dynamics takes place. This method does not require data sets as lengthy as other nonlinear analysis techniques do and is therefore well suited to many astronomical observing programs. Well sampled data covering between twenty and forty characteristic periods of the system have been found to be sufficient for the application of this technique. Additional strengths of this method are its robustness in the presence of noise and the ability for a user to clearly distinguish between periodic, random, and chaotic behavior by inspection of the resulting two-dimensional image. As an example of its power, we analyze close returns in a numerically generated data set, based on a model for Hyperion extensively studied in the literature, corresponding to nightly observations of the satellite. We show that with a small data set, embedded unstable periodic orbits can be extracted and that these orbits can be responsible for nearly periodic behavior lasting a substantial fraction of the observing run.

Boyd, Patricia T.↗

DOE OSTI2021

Rapid and flexible segmentation of electron microscopy data using few-shot machine learning

Abstract Automatic segmentation of key microstructural features in atomic-scale electron microscope images is critical to improved understanding of structure–property relationships in many important materials and chemical systems. However, the present paradigm involves time-intensive manual analysis that is inherently biased, error-prone, and unable to accommodate the large volumes of data produced by modern instrumentation. While more automated approaches have been proposed, many are not robust to a high variety of data, and do not generalize well to diverse microstructural features and material systems. Here, we present a flexible, semi-supervised few-shot machine learning approach for segmentation of scanning transmission electron microscopy images of three oxide material systems: (1) epitaxial heterostructures of SrTiO 3 /Ge, (2) La 0.8 Sr 0.2 FeO 3 thin films, and (3) MoO 3 nanoparticles. We demonstrate that the few-shot learning method is more robust against noise, more reconfigurable, and requires less data than conventional image analysis methods. This approach can enable rapid image classification and microstructural feature mapping needed for emerging high-throughput characterization and autonomous microscope platforms.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Physics-Informed Learning Machines for Multiscale and Multiphysics Problems (PHILMS) (Technical Report)

The research work at University of California Santa Barbara (UCSB) resulted in several new developments in the areas of scientific machine learning, numerical analysis, and practical methods for data-driven modeling, prediction, reductions, and simulation. Many of the projects were carried out in collaboration with members of the national laboratories at Sandia National Laboratories (SNL), Pacific Northwestern National Laboratories (PNNL), and other institutions. Results included developing new scientific machine learning methods, related theory and mathematical frameworks for analysis and training, data-driven numerical solvers, and related tools and software for scientific computation. During the support period, over 16+ papers were submitted for publication, and 4 open-source software packages were developed and released (available at http://atzberger.org/). In addition, 7+ students and 2 post-docs were mentored in collaboration with the laboratory staff for future careers in academia, government labs, and industry.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2003

Fixed Pattern Correction and Rapid Analysis Procedures for He I 1083 nm Imaging Spectroscopy with the NASA/NSO Spectromagnetograph

Imaging spectroscopy in the He 1083 nm lines is a powerful tool for probing the top of the chromosphere and bottom of the transition region. A method for spectral flat-fielding using a uniform solar exposure with spectral lines in place is presented and illustrated with 1083 nm data obtained with the NASA/NSO Spectromagnetograph at the National Solar Observatory Kitt Peak Vacuum Telescope. An efficient method for analysis of the data producing images in continuum intensity, line-of-sight velocity, equivalent width, central line depth, Doppler width, and line asymmetry is also presented and illustrated.

Jones, Harrison P.↗

NASA NTRS1972

Determination of stability derivatives from flight data using a Newton-Raphson minimization technique

A modified Newton-Raphson or quasilinearization minimization technique for determining stability derivatives from flight data was developed and compared with simple-equations, analog-matching, least-squares, and Shinbrot methods of analysis. For the data analyzed, the solutions computed by using the estimates obtained from the Newton-Raphson technique fit the data and determined coefficients adequately. A further modification to include a priori information was found to be useful. A model statistically similar to the flight data was analyzed using the same methods (excluding analog matching), and the Newton-Raphson technique was found to yield superior estimates. An approximate Cramer-Rao bound was compared with the error covariance matrix of the model and was found to provide information about the reliability of the individual estimates obtained. The technique was successfully applied to data obtained from a light airplane, a large supersonic airplane, and a lifting body vehicle. It was shown that the reliability of the estimates of a given coefficient obtained from these vehicles depends upon the data analyzed.

Iliff, K. W.↗