SEARCH · Engineering Papers

Results for “critical experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1989

In-house experiments in large space structures at the Air Force Wright Aeronautical Laboratories Flight Dynamics Laboratory

The Flight Dynamics Laboratory is committed to an in-house, experimental investigation of several technical areas critical to the dynamic performance of future Air Force large space structures. The advanced beam experiment was successfully completed and provided much experience in the implementation of active control approaches on real hardware. A series of experiments is under way in evaluating ground test methods on the 12 meter trusses with significant passive damping. Ground simulated zero-g response data from the undamped truss will be compared directly with true zero-g flight test data. The performance of several leading active control approaches will be measured and compared on one of the trusses in the presence of significant passive damping. In the future, the PACOSS dynamic test article will be set up as a test bed for the evaluation of system identification and control techniques on a complex, representative structure with high modal density and significant passive damping.

Gordon, Robert W.↗

NASA NTRS1975

Detailed design package for design of a video system providing optimal visual information for controlling payload and experiment operations with television

A detailed description of a video system for controlling space shuttle payloads and experiments is presented in the preliminary design review and critical design review, first and second engineering design reports respectively, and in the final report submitted jointly with the design package. The material contained in the four subsequent sections of the package contains system descriptions, design data, and specifications for the recommended 2-view system. Section 2 contains diagrams relating to the simulation test configuration of the 2-view system. Section 3 contains descriptions and drawings of the deliverable breadboard equipment. A description of the recommended system is contained in Section 4 with equipment specifications in Section 5.

Source record↗

NASA NTRS1981

Entrainment and thrust augmentation in pulsatile ejector flows

This study comprised direct thrust measurements, flow visualization by use of a spark shadowgraph technique, and mean and fluctuating velocity measurements with a pitot tube and linearized constant temperature hot-wire anemometry respectively. A gain in thrust of as much as 10 to 15% was observed for the pulsatile ejector flow as compared to the steady flow configuration. From the velocity profile measurements, it is concluded that this enhanced augmentation for pulsatile flow as compared to a nonpulsatile one was accomplished by a corresponding increased entrainment by the primary jet flow. It is also concluded that the augmentation and total entrainment by a constant area ejector critically depends upon the inlet geometry of the ejector. Experiments were performed to evaluate the influence of primary jet to ejector area ratio, ejector length, and presence of a diffuser on pulsatile ejector performance.

Sarohia, V.↗

NASA NTRS1982

On the nature of 2 gamma bursts with spectral evolutions observed by the Konus experiment

Several unique features of the evolving spectra of the April 2, 1979B, and November 11, 1979 gamma-ray bursts observed by the Konus experiment can be used to determine a number of critical parameters of the sources, within the context of the thermal synchrotron model, including their luminosity distance. These results shed much light on the origin of these events and possibly gamma bursts in general.

Liang, E. P.↗

NASA NTRS1983

On the nature of two gamma bursts with spectral evolutions observed by the KONUS experiment

Liang, E. P.↗

NASA NTRS1986

Volume-energy parameters for heat transfer to supercritical fluids

Reduced Nusselt numbers of supercritical fluids from different sources were grouped by several volume-energy parameters. A modified bulk expansion parameter was introduced based on a comparative analysis of data scatter. Heat transfer experiments on liquefied methane were conducted under near-critical conditions in order to confirm the usefulness of the parameters. It was experimentally revealed that heat transfer characteristics of near-critical methane are similar to those of hydrogen. It was shown that the modified bulk expansion parameter and the Gibbs-energy parameter grouped the heat transfer data of hydrogen, oxygen and methane including the present data on near-critical methane. It was also indicated that the effects of surface roughness on heat transfer were very important in grouping the data of high Reynolds numbers.

A. Kumakawa↗

NASA NTRS1987

Measuring pilot workload in a motion base simulator. III - Synchronous secondary task

This experiment continues earlier research of Kantowitz et al. (1983) conducted in a GAT-1 motion-base trainer to evaluate choice-reaction secondary tasks as measures of pilot work load. The earlier work used an asynchronous secondary task presented every 22 sec regardless of flying performance. The present experiment uses a synchronous task presented only when a critical event occurred on the flying task. Both two- and four-choice visual secondary tasks were investigated. Analysis of primary flying-task results showed no decrement in error for altitude, indicating that the key assumption necessary for using a choice secondary task was satisfied. Reaction times showed significant differences between 'easy' and 'hard' flight scenarios as well as the ability to discriminate among flight tasks.

Kantowitz, Barry H.↗

NASA NTRS1990

Observation of seeded second harmonic generation in bulk germanosilicate fiber preforms

Simultaneous irradiation of a bulk fiber preform with molar concentrations of 3 pct Ge and 0.5 pct P doped silica core region resulted in self-organized second harmonic generation with an effective chi(2) of about 1.2 x 10 to the -16th m/V. The experiments revealed that the bulk preform requires the same critical IR intensity (10 GW/sq cm) as the drawn fibers to prepare. Attempts to self-prepare the preform field, indicating that self-preparation in fibers is most likely initiated by second harmonic generation associated with the core-cladding interface.

Lawandy, N. M.↗

NASA NTRS1992

Human behavior and human performance: Psychomotor demands

The results of several experiments are presented in abstract form. These studies are critical for the interpretation and acceptance of flight based science to be conducted by the Behavior and Performance project. Some representative titles are as follow: External audio for IBM/PC compatible computers; A comparative assessment of psychomotor performance (target prediction by humans and macaques); Response path (a dependent measure for computer maze solving and other tasks); Behavioral asymmetries of psychomotor performance in Rhesus monkey (a dissociation between hand preference and skill); Testing primates with joystick based automated apparatus; and Environmental enrichment and performance assessment for ground or flight based research with primates;

Source record↗

NASA NTRS1992

Interferometers adaptations to lidars

To perform daytime measurements of the density and temperature by Rayleigh lidar, it is necessary to select the wavelength with a very narrow spectral system. This filter is composed by an interference filter and a Fabry Perot etalon. The Fabry Perot etalon is the more performent compound, and it is necessary to build a specific optic around it. The image of the entrance pupil or the field diaphragm is at the infinite and the other diaphragm is on the etalon. The optical quality of the optical system is linked to the spectral resolution of the system to optimize the reduction of the field of view. The resolution is given by the formula: R = 8(xD/Fd)exp 2 where R = lambda/delta(lambda), x = diameter of the field diaphragm, D = diameter of the reception mirror, F = focal length of the telescope, and d = useful diameter of the etalon. In the Doppler Rayleigh lidars, the PF interferometer is the main part of the experiment and the exact spectral adaptation is the most critical problem. In the spectral adaptation of interferometers, the transmittance of the system will be acceptable if the etalon is exactly adjusted to the wavelength of the laser. It is necessary to work with a monomode laser, and adjust the shift to the bandpass of the interferometer. We are working with an interferometer built with molecular optical contact. This interferometer is put in a special pressure closed chamber.

Porteneuve, J.↗

NASA NTRS1991

Innovative nuclear thermal propulsion technology evaluation - Results of the NASA/DOE task team study

In response to findings from two NASA/DOE nuclear propulsion workshops, six task teams were created to continue evaluation of various propulsion concepts, from which evolved an innovative concepts subpanel to evaluate thermal propulsion concepts which did not utilize solid fuel. This subpanel endeavored to evaluate each concept on a level technology basis, and to identify critical issues, technologies, and early proof-of-concept experiments. Results of the concept studies including the liquid core fission, the gas core fission, the fission foil reactors, explosively driven systems, fusion, and antimatter are presented.

Howe, Steven D.↗

NASA NTRS1995

Analytical electron microscopy of LDEF impactor residues

The LDEF contained 57 individual experiment trays or tray portions specifically designed to characterize critical aspects of meteoroid and debris environment in low-Earth orbit (LEO). However, it was realized from the beginning that the most efficient use of the satellite would be to characterize impact features from the entire surface of the LDEF. With this in mind particular interest has focused on common materials facing in all 26 LDEF facing directions; among the most important of these materials has been the tray clamps. Therefore, in an effort to better understand the nature and flux of particulates in LEO, and their effects on spacecraft hardware, we are analyzing residues found in impact features on LDEF tray clamp surfaces. This paper summarizes all data from 79 clamps located on Bay A & B of the LDEF. We also describe current efforts to characterize impactor residues recovered from the impact craters, and we have found that a low, but significant, fraction of these residues have survived in a largely unmelted state. These residues can be characterized sufficiently to permit resolution of the impactor origin. We have concentrated on the residue from chondritic interplanetary dust particles (micrometeoroids), as these represent the harshest test of our analytical capabilities.

Bernhard, Ronald P.↗

NASA NTRS1996

Experimental and Analytical Study of Two-Phase Flow in Microgravity

Design of the two-phase flow systems which are anticipated to be utilized in future spacecraft thermal management systems requires a knowledge of two-phase flow and heat transfer parameters in reduced gravities. A program has been initiated by NASA to design a two-phase test loop and to perform a series of experiments to study the effect of gravity on the Critical Heat Flux (CHF) and onset of instability. The test loop is also instrumented to generate data for two-phase pressure drop. In addition to low gravity airplane trajectory testing, the experimental program consisted of a set of laboratory tests which were intended to generate data under the bounding conditions (+1 g and -1 g) in order to plan the test matrix. One set of airplane trajectory tests has been performed and several modifications to the test set-up have been identified. Preliminary test results have been used to demonstrate the applicability of the earth gravity models for prediction of the two-phase friction pressure drop.

McQuillen, John B.↗

NASA NTRS2004

A Selected Operational History of the Internal Thermal Control System (ITCS) for International Space Station (ISS)

The Internal Thermal Control System (ITCS) has been developed jointly by Boeing Corporation, Huntsville, Alabama and Honeywell Engines & Systems, Torrance, California to meet the internal thermal control needs for the International Space Station (ISS). The ITCS provides heat removal for the critical life support systems and thermal conditioning for numerous experiment racks. The ITCS will be fitted on a number of modules on the ISS. The first US Element containing the ITCS, Node 1, was launched in December 1998. Since Node 1 does not contain a pump to circulate the fluid it was not filled with ITCS fluid until after the US Laboratory Module was installed. The second US Element module, US Laboratory Module, which contains the pumps and all the major ITCS control hardware, was launched in February 2001. The third US Element containing the ITCS, the US Airlock, was launched in July 2001. The dual loop system of the ITCS is comprised of a lowtemperature loop (LTL) and a moderate-temperature loop (MTL). Each loop has a pump package assembly (PPA), a system flow control assembly (SFCA), a threeway mixing valve (TWMV), several rack flow control assemblies (RFCA), cold plates, pressure sensors, temperature sensors, pump bypass assembly (PBA) and a heat exchanger. In addition, the MTL has an additional TWMV, a payload regeneration heat exchanger (P/RHE) and a manual flow control valve (MFCV). The LTL has a service performance and checkout unit (SPCU) heat exchanger. The two loops are linked via one loop crossover assembly (LCA) providing cross loop capabilities and a single PPA, two-loop functionality. One important parameter monitored by the ground stations and on-orbit is the amount of fluid leakage from the ITCS. ISS fluid leakage is of importance since ITCS fluid is costly to re-supply, may be difficult to clean up in zero-g, and if uncontained could lead to equipment failures and potential hazards. This paper examines the nominal leakage observed over period of a year of on-orbit operation and compares this with analysis predictions. This paper also addresses the off-nominal leakage and a fluid transfer event causing significant changes in accumulator quantity.

Patel, Vipul P.↗

NASA NTRS2005

Spur Gear Wear Investigated in Support of Space Shuttle Return-To-Flight Efforts

As part of NASA s Return-To-Flight efforts, the Space Operations Program investigated the condition of actuators for the orbiter s rudder speed brake. The actuators control the position of the rudder panels located in the tail of the orbiter, providing both steering control and braking during reentry, approach, and landing. Inspections of flight hardware revealed fretting and wear damage to the critical working surfaces of the actuator gears. To best understand the root cause of the observed damage and to help establish an appropriate reuse and maintenance plan for these safety critical parts, researchers completed a set of gear wear experiments at the NASA Glenn Research Center.

Krantz, Timothy L.↗

NASA NTRS2020

NASA GPU Hackathon Yields Significant Code Improvements

The NASA GPU Hackathon 2020 brought together application developers and computer experts to help get important NASA applications running effectively on graphics processing unit (GPU) nodes. Nine teams of application developers participated in this virtual event, a major impetus for teams to modernize codes of interest for NASA missions to CPU nodes containing GPU accelerators, with a focus on hands-on problem solving. The photo in Figure1 shows 30 of the more than50 participants. The HECC project and NVIDIA jointly organized the event, and HECC provided five Pleiades nodes each with 4 V100 GPUs for teams to use. The virtual event, which took place over four days from September 28–October 7, 2020, used Microsoft Teams and Slack as collaboration tools. Each team consisted of three to six members from NASA Centers and supporting organizations. The teams were paired with one to two mentors from industry, government, and academia. The experience levels of the teams ranged from being GPU novices to advanced CUDA programming experts. OpenACC and the emerging Kokkos API were used in addition to CUDA for GPU programming. During the event, which focused on accelerating AeroSciences and CFD applications, most teams achieved considerable performance improvements on both GPUs and CPUs. For example, a team with no GPU experience completed a first port of a time-critical loop to a GPU. Another team of expert CUDA programmers were able to restructure their algorithm, yielding a factor of five speed-up. And another team sped up some of their CUDA kernels by a factor of 20, which directly translated into their production code. This article highlights some of the many successes resulting from the event.

HECC↗

NASA NTRSDate not supplied

Development and Implementation of a Small Satellite Systems Engineering Webinar Series: A Collaboration Between United Nations Office for Outer Space Affairs and National Aeronautics and Space Administration

The United Nations Office for Outer Space Affairs (UNOOSA) in collaboration with the National Aeronautics and Space Administration (NASA) established a webinar series on NASA systems engineering standards and practices for the purpose of sharing knowledge in this area through UNOOSA’s “Access to Space for All” which provides free and accessible educational content. Through NASA’s Small Spacecraft Systems Virtual Institute (S3VI), the four-part series was designed to cover basic systems engineering and project management skills that are fundamental for planning, developing, and implementing an experiment or a space project, and that serve as critical knowledge for those engaged in space activities, whether as a designer, builder, or manager of space infrastructure and services. This first series of webinars was convened over the course of November 2023 through February 2024. The webinar series was segmented into four one and a half hour webinars which covered topics related to the Fundamentals of Systems Engineering, Requirements and Systems Engineering, System Assembly, Integration and Test, and Spacecraft Handling, as well as an Introduction to the Small Spacecraft Systems Virtual Institute (S3VI). The agendas for the first three webinars focused on addressing a number of questions relevant to a particular topic. Examples of these questions include: What is systems engineering and what does a systems engineer do? Why does NASA use systems engineering? How do you define requirements for a small spacecraft mission? Why are requirements important to space missions? How are trade studies used to determine parts selection and why are they important? The final webinar of the first series provided interactive discussions and demonstrations of the S3VI tools; shared information on additional webinar opportunities offered by the S3VI; and reviewed databases curated by the S3VI that include the Small Satellite Reliability Initiative (SSRI) Knowledge Base Tool, Mission Design Tools, Small Spacecraft Information Search, and the State-of-the-Art (SoA) Small Spacecraft Report. Future webinar series will be conducted with topics are to be determined. The presenter will discuss details related to the first webinar series and future plans for additional series.

systems engineering↗

NASA NTRSDate not supplied

Development and Implementation of A Small Satellite Systems Engineering Webinar Series: A Collaboration Between the United Nations Office for Outer Space Affairs and the National Aeronautics and Space Administration

Systems Engineering↗