Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cracks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Texture Effect on Fatigue Crack Propagation Behavior in Annealed Sheets of an Al-Cu-Mg Alloy

The effects of texture, including Brass, Goss + Cube and Cube, on the fatigue crack growth behavior in annealed Al-Cu–Mg alloy sheets were characterized in this investigation. Results showed that the Goss + Cube sheet possessed the greatest fatigue threshold value and the lowest fatigue crack propagation (FCP) rate, and the Brass sheet presented the smallest threshold value and the greatest FCP rate among the three textured sheets. SEM results showed more slip bands and more tortuous crack path formed in Goss + Cube sheet during cyclic loading, and EBSD results showed that numerous dramatic crack deflections occurred when fatigue crack propagated across Goss-grain boundary in Goss + Cube sheet, indicating that the grain orientations including Goss and Cube had positive effect on enhancing the FCP resistance. On the one hand, Goss and Cube grains have more high Schmid factor slip systems than Brass grain, promoting persistent slip bands formation and externally applied energy consumption, consequently giving rise to a high resistance to FCP. On the other hand, Goss grains could induce crack deflection with large twist angles, resulting in more energy consumption during the cracking process and thereby enhance the FCP resistance.

36 MATERIALS SCIENCE↗

Quantitative linkage between the stress at dislocation channel – Grain boundary interaction sites and irradiation assisted stress corrosion crack initiation

Localized deformation has emerged as a key factor in the crack initiation process for irradiated steels, as cracks are observed to nucleate preferentially at these sites. Using high resolution electron backscatter diffraction (HREBSD), the local stress tensor surrounding the dislocation channel-grain boundary interaction sites was quantified and coupled with fully determined grain boundary plane orientation information to determine, for the first time, the relationship between grain boundary normal stress and intergranular crack initiation in irradiated austenitic stainless steel. A Fe-13Cr-15Ni alloy was strained in simulated boiling water reactor, normal water chemistry after quantifying the residual stress tensor at discontinuous dislocation channel – grain boundary interaction sites where grain boundaries were determined to be well oriented with respect to the loading axis. Local stresses at the grain boundary were observed to reach magnitudes greater than 1.5 GPa at a distance of 200 nm from the intersection between the dislocation channel and the grain boundary. A pseudo-threshold stress of 0.9 GPa was measured, below which no cracking was observed. As the stress acting normal to the grain boundary increased above this value, the susceptibility to cracking increased with the cracking fraction reaching 100% at the high end of the stress range. This study shows for the first time that not only does intersection between discontinuous dislocation channels and grain boundaries result in peak local stresses, while the magnitude of the local tensile stress drives the crack initiation process.

36 MATERIALS SCIENCE↗

Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process

This paper deals with the evolution of the corrosion pattern based on two beams corroded by 14 years (beam B1CL1) and 23 years (beam B2CL1) of conservation in a chloride environment. The experimental results indicate that, at the cracking initiation stage and the first stage of cracking propagation, localized corrosion due to chloride ingress is the predominant corrosion pattern and pitting corrosion is the main factor that influences the cracking process. As corrosion cracking increases, general corrosion develops rapidly and gradually becomes predominant in the second stage of cracking propagation. A comparison between existing models and experimental results illustrates that, although Vidal et al.'s model can better predict the reinforcement corrosion of beam B1CL1 under localized corrosion, it cannot predict the corrosion of beam B2CL1 under general corrosion. Also, Rodriguez's model, derived from the general corrosion due to electrically accelerated corrosion experiments, cannot match natural chloride corrosion irrespective of whether corrosion is localized or general. Thus, for natural general corrosion in the second stage of cracking propagation, a new model based on the parameter of average steel cross-section loss is put forward to predict steel corrosion from corrosion cracking.

36 MATERIALS SCIENCE↗

Derivation of crack bridging stresses in engineered cementitious composites under combined opening and shear displacements

The mechanical behavior of Engineered Cementitious Composites (ECC) is strongly dependent on the bridging of cracks by fibers. Due to the bridging action of fibers, tensile and shear stresses can be transferred through cracks in ECC members. In this study, a micromechanics based theoretical model is proposed to describe the shear transfer mechanism on the crack surface due to fiber bridging effect. The model focuses on flexible fibers and both the normal stress along the crack opening direction and the shear stress transferred across the crack surfaces are derived under the coupled effect of crack opening displacement (COD) and shear sliding. With the proposed model, the mechanism of fibers contributing to the shear transfer can be understood and the effect of various micromechanical parameters can be investigated. The simulation results can provide insight on the behavior of ECC under shear loading when cracks are propagating under mixed mode.

36 MATERIALS SCIENCE↗

Nanotomographic observation and statistical analysis of overcharging induced cracks in LiCoO 2 single crystalline particles

Particle fracture represents an important mode of battery electrode degradation. Extensive cracking occurs in the layered oxide cathodes of lithium-ion rechargeable batteries when they are charged beyond safe operational voltages. In this paper, we analyze the morphology and distribution of cracks in over 100 overcharged LiCoO 2 (LCO) single-crystalline particles imaged via X-ray nanotomography. Herein, we observe a strong particle size dependence in both nucleation and growth of cracks, with percentage of cracked particles, crack size, and crack surface area per unit volume all increasing significantly with particle volume. Increasing the cutoff voltage above 4.6V is found to trigger much more pronounced crack growth, which we attribute to the large misfit stress caused by the H1-3 to O1 phase transition. This study offers valuable statistical insights into the fracture behavior of layered oxide cathodes and reveals the importance of particle size control on electromechanical degradation of battery electrodes.

25 ENERGY STORAGE↗

Fatigue cracking of a bare steel first wall in an inertial confinement fusion chamber

Inertial confinement fusion power plants will deposit high energy X-rays onto the outer surfaces of the first wall many times a second for the lifetime of the plant. These X-rays create brief temperature spikes in the first few microns of the wall, which cause an associated highly compressive stress response on the surface of the material. The periodicity of this stress pulse is a concern due to the possibility of fatigue cracking of the wall. We have used finite element analyses to simulate the conditions present on the first wall in order to evaluate the driving force of crack propagation on fusion-facing surface cracks. Analysis results indicate that the X-ray induced plastic compressive stress creates a region of residual tension on the surface between pulses. This tension film will likely result in surface cracking upon repeated cycling. Additionally, the compressive pulse may induce plasticity ahead of the crack tip, leaving residual tension in its wake. However, the stress amplitude decreases dramatically for depths greater than 80–100 μm into the fusion-facing surface. Crack propagation models as well as stress-life estimates agree that even though small cracks may form on the surface of the wall, they are unlikely to propagate further than 100 μm without assistance from creep or grain erosion phenomena.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effects of microstructure banding on hydrogen assisted fatigue crack growth in X65 pipeline steels

Banded ferrite-pearlite X65 pipeline steel was tested in high pressure hydrogen gas to evaluate the effects of oriented pearlite on hydrogen assisted fatigue crack growth. Test specimens were oriented in the steel pipe such that cracks propagated either parallel or perpendicular to the banded pearlite. The ferrite-pearlite microstructure exhibited orientation dependent behavior in which fatigue crack growth rates were significantly lower for cracks oriented perpendicular to the banded pearlite compared to cracks oriented parallel to the bands. Thus the reduction of hydrogen assisted fatigue crack growth across the banded pearlite is attributed to a combination of crack-tip branching and impeded hydrogen diffusion across the banded pearlite.

36 MATERIALS SCIENCE↗

Phase-field modeling of crack growth under coupled creep-fatigue

Crack growth under coupled creep-fatigue strongly influences service life of metallic components operating at high temperatures. However, there lack numerical models that enable direct simulations of crack growth and plasticity development under coupled creep-fatigue. Here, in this study, a unified phase-field model is developed for simulating crack growth under fatigue, creep, and coupled creep-fatigue. This model is able to reproduce the Paris laws for both brittle and ductile materials in pure fatigue mode, which shows that the degradation rate due to cyclic stress in ductile materials is generally larger than that in brittle materials. Fatigue simulations with different yield strengths demonstrate that plasticity facilitates crack growth in typical ductile materials. High-throughput simulations are performed under coupled creep-fatigue conditions, with varying hold-stress levels and hold-time. By analyzing crack growth rate under different hold-time, a creep-fatigue interaction term is obtained. Simulation results demonstrate that the creep-fatigue interaction is caused by smaller stress gradient and enhanced degradation rate ahead of the crack tips under coupled creep-fatigue, compared to the situation of pure fatigue. This work reveals the origin of different Paris-law exponents in brittle and ductile materials and demonstrates how the interplay between creep and fatigue affects crack growth.

36 MATERIALS SCIENCE↗

Scale bridging damage model for quasi-brittle metals informed with crack evolution statistics

Computationally efficient methods for bridging length scales, from highly resolved micro/meso-scale models that can explicitly model crack growth, to macro-scale continuum models that are more suitable for modeling large parts, have been of interest to researchers for decades. In this work, an improved brittle damage model is presented for the simulation of dynamic fracture in continuum scale quasi-brittle metal components. Crack evolution statistics, including the number, length, and orientation of individual cracks, are extracted from high-fidelity, finite discrete element method (FDEM) simulations and used to generate effective material moduli that reflect the material’s damaged state over time. This strategy allows for the retention of small-scale physical behaviors such as crack growth and coalescence in continuum scale hydrodynamic simulations. However, the high-fidelity simulations required to generate the crack statistics are computationally expensive. Thus, steps were taken to produce a flexible constitutive model to reduce the number of costly high-fidelity simulations needed to produce accurate results. A new stress based degradation criterion is introduced for the degradation of individual material zones. This allows for the development of a heterogeneous damage distribution within the bulk material. Then a flow stress model is added to the hydrodynamic simulation to account for plasticity in quasi-brittle materials. As a result, the effective moduli model can be applied to a larger range of materials. The effective moduli constitutive model is used to simulate beryllium flyer plate experiments. The results from the continuum scale simulations using statistics from a single high-fidelity simulation are found to be in excellent agreement with numerical and experimental velocity interferometer data. The same set of crack statistics are used to extrapolate the results of a higher rate flyer plate case using the effective moduli model. In conclusion, the extension of this model to higher rate cases shows promise for further reducing the number of costly high-fidelity simulations needed to generate crack statistics.

36 MATERIALS SCIENCE↗

Analysis of stress corrosion cracking in alloy 718 following commercial reactor exposure

Alloy 718 is generally considered a highly corrosion-resistant material but can still be susceptible to stress corrosion cracking (SCC). The combination of factors leading to SCC susceptibility in the alloy is not always clear enough. In this paper, alloy 718 leaf spring (LS) materials that suffered stress corrosion damage during two 24-month cycles in pressurized water reactor service, operated to >45 MWd/mtU burn-up, was investigated. Compared to archival samples fabricated through the same processing conditions, little microstructural and property changes occurred in the material with in-service irradiation, contrary to high dose rate laboratory-based experiments reported in literature. Though the lack of delta phase formation along grain boundaries would suggest a more SCC resistant microstructure, grain boundary cracking in the material was extensive. Crack propagation routes were explored through focused ion beam milling of specimens near the crack tip for transmission electron microscopy as well as in polished plan view and cross-sectional samples for electron backscatter diffraction analysis. It has been shown in this study that cracks propagated mainly along random high-angle grain boundaries, with the material around cracks displaying a high local density of dislocations. The slip lines were produced through the local deformation of the leaf spring material above their yield strength. Also, the cause for local SCC appears to be related to oxidation of both slip lines and grain boundaries, which under the high in-service stresses resulted in crack development in the material.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effects of polymeric binders on the cracking behavior of silicon composite electrodes during electrochemical cycling

Mechanical degradation caused by lithiation/delithiation-induced stress and large volume change is the primary cause of fast capacity fading of silicon (Si)-based electrodes. Although intensive efforts have been devoted to understanding electromechanically induced fractures of electrodes made of Si alone (e.g., Si particles, Si thin films, and Si wafers), the cracking behavior of Si/polymeric binders/carbon black composite electrodes is unclear and poorly understood. Here, we investigate, by in situ and ex situ techniques, the cracking behavior of Si composite electrodes made with different binders, including polyvinylidene fluoride (PVDF), sodium-alginate (SA), sodium-carboxymethyl cellulose (Na-CMC), and Nafion. We found that extensive cracks form during the 1st delithiation process, which periodically open and close during subsequent lithiation/delithiation cycles at the same locations in the Si composite electrodes made with SA, Na-CMC, and Nafion. In contrast, a significantly fewer number of cracks form in the Si/PVDF electrodes after electrochemical cycling. A possible mechanism is proposed to help understand the effects of binders on the cracking behavior (e.g., crack spacing and island size) of Si composite electrodes. We also suggest possible approaches, including reducing the electrode thickness, patterning electrodes, and using highly recoverable binders, to inhibit cracks and improve the mechanical integrity of Si composite electrodes.

25 ENERGY STORAGE↗

Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique

Laser 3D printing is a promising technique to repair damaged Ni-based superalloy components. However, the occurrence of heat affected zone (HAZ) cracking severely limits its applicability. In this paper, we unravel the cracking mechanism by studying the element, phase, defect, and strain distribution around an intergranular crack that initiated from the primary HAZ. Using synchrotron X-ray Laue microdiffraction, we measured high tensile strain/stress transverse to the building direction in both the primary HAZ and the cladding layers, as well as high-density dislocations, which resulted from the thermal contraction and rapid precipitation of γ' phase. The crack initiated because the transverse tensile strain/stress tore up the liquid film formed by the low-melting point preexisting phases in the primary HAZ, such as γ/γ' eutectics and coarse γ' precipitates. The incoherent carbide particles were frequently observed near the crack root as local strain concentrators. In the cladding layers, micro-segregation could not be completely avoided, thus the hot crack continued to propagate over several layers with the assistance of the transverse tensile stress. Finally, our investigations provide a useful guideline for the optimization of the 3D printing process to repair Ni-based superalloys with high susceptibility to hot cracking.

36 MATERIALS SCIENCE↗

Computational simulation of asymmetric phase transformation in cracked Li₇La₃Zr₂O₁₂: Variant selection and chemo-mechanical implications

Coupling between microcracks and phase transformation in ion-conducting ceramics can jointly affect mechanical responses and ion transport. In this work we investigate the cubic-to-tetragonal phase transformation in Li₇La₃Zr₂O₁₂ in the presence of a microcrack under hydrostatic loading and quantify its implications for crack-tip stress concentration and Li-ion transport using phase-field and molecular dynamics simulations. The phase transformation exhibits a strong asymmetry between hydrostatic tension and compression. Under tension, the crack edge nucleates one tetragonal variant that amplifies the crack-tip stress intensity and promotes crack opening. Under compression, the crack tip nucleates a different tetragonal variant that enhances the stress-induced crack-closure tendency. Effective Li diffusivity analysis shows faster transport degradation under compression due to accelerated transformation kinetics, exposing a trade-off between mechanical stability and ionic conductivity. These results highlight the intertwined nature of cracking, phase transformation, and ionic transport in ion-conducting oxides and provide mechanistic insights into chemo-mechanical degradation of solid electrolytes.

36 MATERIALS SCIENCE↗

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗

Unified continuum damage model for matrix cracking in composite rotor blades

This paper deals with modeling of the first damage mode, matrix micro-cracking, in helicopter rotor/wind turbine blades and how this effects the overall cross-sectional stiffness. The helicopter/wind turbine rotor system operates in a highly dynamic and unsteady environment leading to severe vibratory loads present in the system. Repeated exposure to this loading condition can induce damage in the composite rotor blades. These rotor/turbine blades are generally made of fiber-reinforced laminated composites and exhibit various competing modes of damage such as matrix micro-cracking, delamination, and fiber breakage. There is a need to study the behavior of the composite rotor system under various key damage modes in composite materials for developing Structural Health Monitoring (SHM) system. Each blade is modeled as a beam based on geometrically non-linear 3-D elasticity theory. Each blade thus splits into 2-D analyzes of cross-sections and non-linear 1-D analyzes along the beam reference curves. Two different tools are used here for complete 3-D analysis: VABS for 2-D cross-sectional analysis and GEBT for 1-D beam analysis. The physically-based failure models for matrix in compression and tension loading are used in the present work. Matrix cracking is detected using two failure criterion: Matrix Failure in Compression and Matrix Failure in Tension which are based on the recovered field. A strain variable is set which drives the damage variable for matrix cracking and this damage variable is used to estimate the reduced cross-sectional stiffness. The matrix micro-cracking is performed in two different approaches: (i) Element-wise, and (ii) Node-wise. The procedure presented in this paper is implemented in VABS as matrix micro-cracking modeling module. Three examples are presented to investigate the matrix failure model which illustrate the effect of matrix cracking on cross-sectional stiffness by varying the applied cyclic load.

36 MATERIALS SCIENCE↗

Optimization of ultrasonic array inspections using an efficient hybrid model and real crack shapes

Models which simulate the interaction of ultrasound with cracks can be used to optimize ultrasonic array inspections, but this approach can be time-consuming. To overcome this issue an efficient hybrid model is implemented which includes a finite element method that requires only a single layer of elements around the crack shape. Scattering Matrices are used to capture the scattering behavior of the individual cracks and a discussion on the angular degrees of freedom of elastodynamic scatterers is included. Real crack shapes are obtained from X-ray Computed Tomography images of cracked parts and these shapes are inputted into the hybrid model. The effect of using real crack shapes instead of straight notch shapes is demonstrated. An array optimization methodology which incorporates the hybrid model, an approximate single-scattering relative noise model and the real crack shapes is then described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress intensity factors of eccentric cracks in bi-materials plate under mode I loading

Bi-material plates were generally used to joint electronic devices or mechanical components requiring dissimilar materials to be attached. During services, mechanical failure can be occurred due to the formation of cracks at the interfacial joint or away from the centre. Generally, linear elastic fracture mechanics approach is used to characterize these cracks based on stress intensity factors (SIF). Based on the literature survey, the SIFs for the central cracks were easily available. However, the SIFs for eccentric cracks were difficult to obtain. Therefore, this paper presented the SIFs for eccentric cracks subjected to mode I tension loading. Three important parameters were used such as relative crack depth, a/L, relative offset distance, b/L and elastic mismatch, E{sub 1}/E{sub 2} or α. It was found that such parameters significantly affected the characteristic of SIFs and it was depend on the location of cracks.

42 ENGINEERING↗

A data-driven approach to construct a quantitative relationship between microstructural features of fatigue cracks and contact acoustic nonlinearity

This study demonstrates the feasibility of a data-driven approach to construct a quantitative relationship between nonlinear acoustic parameters and microstructural features of contact interfaces. The near-surface nonlinearity is measured using dynamic acousto-elastic testing (DAET) with a surface wave probe, while the microstructural features are extracted from scanning electron microscopy (SEM) images of fatigue cracks. Four aluminum alloy samples, each having a fatigue crack are prepared. Six local nonlinearity parameters are measured at different locations along the crack propagation direction. A total of 40 local measurements are acquired. A principal component analysis (PCA) reveals that all six nonlinearity parameters are correlated and hence can be replaced by one principal component (PC). Fifteen crack micro-geometrical features at each measurement point were extracted from the SEM images. Regression analysis is used to relate the PC of the nonlinearity parameters to the microstructural features at the crack interface. We compare three regression models that take variable selection into account: stepwise multiple linear regression (MLR), stepwise principal component regression (PCR), and least absolute shrinkage and selection operator (LASSO). Despite having different principles, the three predictive models identify two features as the most significant in predicting the interface nonlinearity: the crack aperture (opening) distribution and the distance to the crack tip. The differences between the three models and the physical interpretation of the data-driven predictions are discussed.

36 MATERIALS SCIENCE↗