Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronagraphs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

IMAGING COMET ISON C/2012 S1 IN THE INNER CORONA AT PERIHELION

Much anticipation and speculation were building around comet ISON, or C/2012 S1, discovered on 2012 September 21 by the International Scientific Optical Network telescope in Russia, and bound for the Sun on 2013 November 28, with a closest heliocentric approach distance of 2.7 R {sub ☉}. Here we present the first white light image of the comet's trail through the inner corona. The image was taken with a wide field Lyot-type coronagraph from the Mees Observatory on Haleakala at 19:12 UT, past its perihelion passage at 18:45 UT. The perfect match between the comet's trail captured in the inner corona and the trail that had persisted across the field of view of 2-6 R {sub ☉} of the Solar and Heliospheric Observatory Large Angle and Spectrometric Coronagraph Experiment/C2 coronagraph at 19:12 UT demonstrates that the comet survived its perihelion passage.

79 ASTRONOMY AND ASTROPHYSICS↗

FIVE DEBRIS DISKS NEWLY REVEALED IN SCATTERED LIGHT FROM THE HUBBLE SPACE TELESCOPE NICMOS ARCHIVE

We have spatially resolved five debris disks (HD 30447, HD 35841, HD 141943, HD 191089, and HD 202917) for the first time in near-infrared scattered light by reanalyzing archival Hubble Space Telescope (HST)/NICMOS coronagraphic images obtained between 1999 and 2006. One of these disks (HD 202917) was previously resolved at visible wavelengths using the HST/Advanced Camera for Surveys. To obtain these new disk images, we performed advanced point-spread function subtraction based on the Karhunen-Loève Image Projection algorithm on recently reprocessed NICMOS data with improved detector artifact removal (Legacy Archive PSF Library And Circumstellar Environments (LAPLACE) Legacy program). Three of the disks (HD 30447, HD 35841, and HD 141943) appear edge-on, while the other two (HD 191089 and HD 202917) appear inclined. The inclined disks have been sculpted into rings; in particular, the disk around HD 202917 exhibits strong asymmetries. All five host stars are young (8-40 Myr), nearby (40-100 pc) F and G stars, and one (HD 141943) is a close analog to the young Sun during the epoch of terrestrial planet formation. Our discoveries increase the number of debris disks resolved in scattered light from 19 to 23 (a 21% increase). Given their youth, proximity, and brightness (V = 7.2-8.5), these targets are excellent candidates for follow-up investigations of planet formation at visible wavelengths using the HST/Space Telescope Imaging Spectrograph coronagraph, at near-infrared wavelengths with the Gemini Planet Imager and Very Large Telescope/SPHERE, and at thermal infrared wavelengths with the James Webb Space Telescope NIRCam and MIRI coronagraphs.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of Coronal Mass Ejection physical parameters from a combination of polarized visible light and UV Lyα observations

Visible-light observations of Coronal Mass Ejections (CMEs) performed with coronagraphs and heliospheric imagers (in primis on board the Solar and Heliospheric Observatory and STEREO missions) have offered the best way to study the kinematics and geometrical structure of these fundamental events so far. Nevertheless, it has been widely demonstrated that only combination of multi-wavelength data (including X-ray spectra, EUV images, EUV-UV spectra, and radio dynamic spectra) can provide complete information on the plasma temperature and density distributions, non-thermal motions, magnetic fields, and other physical parameters, for both CMEs and CME-related phenomena. In this work, we analyze three CMEs by combining simultaneous data acquired in the polarized visible light by the LASCO-C2 coronagraph and in the UV H i Lyα line (1216 Å) by the UVCS spectrometer, in order to estimate the CME plasma electron density (using the polarization-ratio technique to infer the 3D structure of the CME) and temperature (from the comparison between the expected and measured Lyα intensities) along the UVCS field of view. This analysis is primarily aimed at testing the diagnostic methods that will be applied to coronagraphic observations of CMEs delivered by the Metis instrument on board the next ESA-Solar Orbiter mission. We find that CME cores are usually associated with cooler plasma (T∼10{sup 6} K), and that a significant increase of the electron temperatures is observed from the core to the front of the CME (where T>10{sup 6.3} K), which seems to be correlated, in all cases, with the morphological structure of the CME as derived from visible-light images.

79 ASTRONOMY AND ASTROPHYSICS↗

CHALLENGING SOME CONTEMPORARY VIEWS OF CORONAL MASS EJECTIONS. II. THE CASE FOR ABSENT FILAMENTS

When a coronal mass ejection (CME) appears in a coronagraph it often exhibits three parts. This “classic” three-part configuration consists of a bright leading edge, a dark circular- or teardrop-shaped cavity, and a bright core within the cavity. It is generally accepted that these are manifestations of coronal plasma pileup, the driving magnetic flux rope, and the associated eruptive filament, respectively. The latter has become accepted by the community since coronagraph CMEs have been commonly associated with eruptive filaments for over 40 years. In this second part of our series challenging views on CMEs, we present the case that the inner core of the three-part coronagraph CME may not be, and in the most common cases is not, a filament. We present our case in the form of four exhibits showing that most of the CMEs in a broad survey are not associated with an eruptive filament at the Sun, and that the cores of those CMEs that are filament-associated do not geometrically resemble or consist of material from the associated filament. We conclude with a discussion on the possible causes of the bright CME core and what happens to the filament material postlaunch. We discuss how the CME core could arise spontaneously from the eruption of a flux rope from the Sun, or could be the result of a mathematical caustic produced by the geometric projection of a twisted flux rope.

79 ASTRONOMY AND ASTROPHYSICS↗

The Pale Green Dot: A Method to Characterize Proxima Centauri b Using Exo-Aurorae

We examine the feasibility of detecting auroral emission from the potentially habitable exoplanet Proxima Centauri b. Detection of aurorae would yield an independent confirmation of the planet’s existence, constrain the presence and composition of its atmosphere, and determine the planet’s eccentricity and inclination, thereby breaking the mass-inclination degeneracy. If Proxima Centauri b is a terrestrial world with an Earth-like atmosphere and magnetic field, we estimate that the power at the 5577 Å O i auroral line is on the order of 0.1 TW under steady-state stellar wind, or ∼100× stronger than that on Earth. This corresponds to a planet–star contrast ratio of 10{sup −6}--10{sup −7} in a narrow band about the 5577 Å line, though higher contrast (10{sup −4}--10{sup −5}) may be possible during periods of strong magnetospheric disturbance (auroral power 1–10 TW). We searched the Proxima Centauri b HARPS data for the 5577 Å line and for other prominent oxygen and nitrogen lines, but find no signal, indicating that the O i auroral line contrast must be lower than 2×10{sup −2} (with power ≲3000 TW), consistent with our predictions. We find that observations of 0.1 TW auroral emission lines are likely infeasible with current and planned telescopes. However, future observations with a space-based coronagraphic telescope or a ground-based extremely large telescope (ELT) with a coronagraph could push sensitivity down to terawatt oxygen aurorae (contrast 7×10{sup −6}) with exposure times of ∼1 day. If a coronagraph design contrast of 10{sup −7} can be achieved with negligible instrumental noise, a future concept ELT could observe steady-state auroral emission in a few nights.

79 ASTRONOMY AND ASTROPHYSICS↗

Research in planetary astronomy

The objective is the continuation of a long-term research program designed to study the composition, structure and processes operating on the surfaces of solar system objects using the Mauna Kea Observatory with techniques and modern instrumentation. Reflectance spectroscopy and multispectral imaging in the spectral region, 0.3 to 5.0 micrometer are the major techniques used, although thermal (10 micrometer and 20 micrometer) radiometry are used in some aspects of the research. Some specific projects include: (1) systematic spectral imaging observations of the Moon; (2) systematic spectral imaging and spectral monitoring of the Martian surface; (3) thermal radiometry of asteroids as part of the IRAS follow-up and other target specific programs; (4) searches for asteroid satellites and dust belts using a stellar coronagraph; and (5) studies of circumstellar disks using a stellar coronagraph. Progress for each of the programs included is discussed. minerals; (2) completed observations of lunar multi-ringed basins and crater deposits in search of high-Ca spectral anomalies; (3) completed data reduction of an additional 5 asteroids observed by the coronagraphic technique in the search for asteroids satellites and debris clouds; and (4) completed the reduction and calibration of 350 asteroids observed at 10 micron and 20 micron using the NASA IRTF.

Mccord, Thomas B.↗

Planetary optical and infrared imaging

The purpose of this investigation is to obtain and analyze high spatial resolution charge coupled device (CCD) coronagraphic images of extra-solar planetary material and solar system objects. These data will provide information on the distribution of planetary and proto-planetary material around nearby stars leading to a better understanding of the origin and evolution of the solar system. Imaging within our solar system will provide information on the current cloud configurations on the outer planets, search for new objects around the outer planets, and provide direct support for Voyager, Galileo, and CRAF by imaging material around asteroids and clouds on Neptune. Over the last year this program acquired multispectral and polarization images of the disk of material around the nearby star Beta Pictoris. This material is believed to be associated with the formation of planets and provides a first look at a planetary system much younger than our own. Preliminary color and polarization data suggest that the material is very low albedo and similar to dark outer solar system carbon rich material. A coronagraphic search for other systems is underway and has already examined over 100 nearby stars. Coronagraphic imaging provided the first clear look at the rings of Uranus and albedo limits for the ring arcs around Neptune.

Terrile, R. J.↗

An Infrared Telescope for Planet Detection and General Astrophysics

NASA plans to launch a Terrestrial Planet Finder (TPF) mission in 2014 to detect and characterize Earth-like planets around nearby stars, perform comparative planetology studies, and obtain general astrophysics observations. During our recently completed a TPF Mission Architecture study for NASA/JPL we developed the conceptual design for a 28-meter telescope with an IR Coronagraph that meets these mission objectives. This telescope and the technology it embodies are directly applicable to future Far-IR and Submillimeter space missions. The detection of a 30th magnitude planet located within 50 milli-arc-seconds of a 5th (Visual) magnitude star is an exceptionally challenging objective. Observations in the thermal infrared (7-17 microns) are somewhat easier since the planet is "only" 15(sup m) fainter than the star at these wavelengths, but many severe challenges must still be overcome. These challenges include: 1. Designing a coronagraph for star:planet separations less than or equal to lambda/D. 2. Developing the deployment scheme for a 28m space telescope that can fit in an existing launch vehicle payload fairing. 3. Generating configuration layouts for the IR telescope, coronagraph, spacecraft bus, sunshade, solar array, and high-gain antenna. 4. Providing: Structural stability to within 10 microns to support the optics. Thermal control to achieve the necessary structural stability, as well as providing a stable (approx. 30K) thermal environment for the optics. Dynamics isolation from potential jitter sources. 5. Minimizing launch mass to provide the maximum payload for the science mission Interfacing to an EELV Heavy launch vehicle, including acoustic and stress loads for the launch environment. 6. Identifying the key technologies (which can be developed by 2009) that will enable TPF mission to be performed. 7. Generating a manufacturing plan that will permit TPF to be developed at a reasonable cost and schedule. Many of these design challenges result in inherently conflicting requirements on the design of TPF. Drawing on our experience with large space telescopes such as the Chandra X-ray Observatory and the Next Generation Space Telescope, we have created a conceptual design for TPF that successfully meets these challenging requirements. This paper describes our solution to these challenges.

Lillie, C. F.↗

Coronal Structures Observed by Radio Propagation Measurements

This paper summarizes (1) advances in our knowledge of coronal structures inferred from radio propagation measurements, and (2) gains in our understanding of the relationship between radio propagation and white-light coronagraph measurements. Radio propagation measurements confirm that streamers are ray-like structures as depicted in coronagraph pictures, but also reveal a hierarchy of filamentary structures throughout the corona, extending from the size of streamers down to scale sizes as small as about 1 km at the Sun (10(ghe) arcsec). Doppler scintillation measurements, therefore, open a new window on small-scale structure that has long eluded coronagraph measurements. In addition, high precision ranging measurements make it possible to investigate large-scale structures not yet observed in corona graphs, such as plumes in equatorial coronal regions.

Sun↗

Closed Loop, DM Diversity-based, Wavefront Correction Algorithm for High Contrast Imaging Systems

High contrast imaging from space relies on coronagraphs to limit diffraction and a wavefront control systems to compensate for imperfections in both the telescope optics and the coronagraph. The extreme contrast required (up to 10(exp -10) for terrestrial planets) puts severe requirements on the wavefront control system, as the achievable contrast is limited by the quality of the wavefront. This paper presents a general closed loop correction algorithm for high contrast imaging coronagraphs by minimizing the energy in a predefined region in the image where terrestrial planets could be found. The estimation part of the algorithm reconstructs the complex field in the image plane using phase diversity caused by the deformable mirror. This method has been shown to achieve faster and better correction than classical speckle nulling.

Give'on, Amir↗

A Historic View of Solar Coronal Mass Ejections (CMEs)

We present a historic overview of CME observations, ending with concepts for future measurement capabilities. One of the first detections of what we now call a CME was provided by instrumentation on OSO-7 and reported by Tousey (1973); but the phrase "corona) mass ejection" was coined after the Skylab/ATM coronagraph detected dozens of the transients over its nine month observing run (e.g., Munro et al., 1979). Pre-discovery identification of likely CMEs were then reported in historic eclipse photographs and drawings (e.g., Eddy, 1974; Cliver, 1989). Multi-year observations followed with groundbased MLSO MK3/4 coronagraph (1980-present), and spacebased missions: Solwind (1979-1985), SMM (1980-1989), SOHO LASCO/EIT (1996-present), SMEI (2003-present), and STEREO SECCHI (2006-present). The Spartan 201 coronagraph flew in space multiple times. The influential Gosling (1993) "solar flare myth" manuscript identified CMEs as the cause of the most severe geomagnetic storms, thus cementing their importance in Sun-Earth connection studies. A new window into CMEs was opened with the launch of SOHO in 1995 when the UVCS spectrometer began returning plasma diagnostics of a significant number of events (e.g., Ciaravella et al., 2006). What about the future for CME research? Statistical properties of the UVCS CME observations are forthcoming; the STEREO mission should continue to return views of CMEs from unique vantage points; and the recent launch of SDO should provide new insights into the small spatial scale dynamics of activity associated with CMEs. Several new observing techniques have been demonstrated at total eclipses, and inclusion on spacebased platforms in the future could also prove valuable for understanding CMEs. A common element of several recent proposals is to image the white-light corona with extremely high spatial resolution. The momentary glimpses of the corona during total solar eclipses have shown fine structure that is not captured by global models, and dynamics of these structured elements may be important to resolve the question of CME initiation.

SaintCyr, Orville C.↗

Relationship Between the Expansion Speed and Radial Speed of CMEs Confirmed Using Quadrature Observations from SOHO and STEREO

It is difficult to measure the true speed of Earth-directed CMEs from a coronagraph along the Sun-Earth line because of the occulting disk. However, the expansion speed (the speed with which the CME appears to spread in the sky plane) can be measured by such coronagraph. In order to convert the expansion speed to radial speed (which is important for space weather applications) one can use empirical relationship between the two that assumes an average width for all CMEs. If we have the width information from quadrature observations, we can confirm the relationship between expansion and radial speeds derived by Gopalswamy et al. (2009, CEAB, 33, 115,2009). The STEREO spacecraft were in quadrature with SOHO (STEREO-A ahead of Earth by 87 and STEREO-B 94 behind Earth) on 2011 February 15, when a fast Earth-directed CME occurred. The CME was observed as a halo by the Large-Angle and Spectrometric Coronagraph (LASCO) on board SOHO. The sky-plane speed was measured by SOHO/LASCO as the expansion speed, while the radial speed was measured by STEREO-A and STEREO-B. In addition, STEREO-A and STEREO-B images measured the width of the CME, which is unknown from Earth view. From the SOHO and STEREO measurements, we confirm the relationship between the expansion speed (Vexp ) and radial speed (Vrad ) derived previously from geometrical considerations (Gopalswamy et al. 2009): Vrad = 1/2 (1 + cot w) Vexp, where w is the half width of the CME. STEREO-B images of the CME, we found that CME had a full width of 75 degrees, so w = 37.5 degrees. This gives the relation as Vrad = 1.15 Vexp. From LASCO observations, we measured Vexp = 897 km/s, so we get the radial speed as 1033 km/s. Direct measurement of radial speed from STEREO gives 945 km/s (STEREO-A) and 1057 km/s (STEREO-B). These numbers are different only by 2.3% and 8.5% (for STEREO-A and STEREO-B, respectively) from the computed value.

Gopalswamy, Nat↗

Heliocentric Distance of Coronal Mass Ejections at the Time of Energetic Particle Release: Revisiting the Ground Level Enhancement Events of Solar Cycle 23

Using the kinematics of coronal mass ejections (CMEs), onset time of soft X-ray flares, and the finite size of the pre-eruption CME structure, we derive the heliocentric distan~e at which the energetic particles during the ground level enhancement (GLE) events of Solar Cycle 23. We find that the GLE particles are released when the CMEs reach an average heliocentric distance of approx.3.25 solar radii (Rs). From this we infer that the shocks accelerating the particles are located at similar heights. Type II radio burst observations indicate that the CMEs are at much lower distances (average approx.1.4 Rs) when the CME-driven shock first forms. The shock seems to travel approx.1.8 Rs over a period of approox.30 min on the average before releasing the GLE particles. In deriving these results, we made three assumptions that have observational support: (i) the CME lift off occurs from an initial distance of about 1.25 Rs; (ii) the flare onset and CME onset are one and the same because these are two different manifestations of the same eruption; and (iii) the CME has positive acceleration from the onset to the first appearance in the coronagraphic field of view (2.5 to 6 Rs). Observations of coronal cavities in eclipse pictures and in coronagraphic images justify the assumption (i). The close relationship between the flare reconnection magnetic flux and the azimuthal flux of interplanetary magnetic clouds justify assumption (ii) consistent with the standard model (CSHKP) of solar eruption. Coronagraphic observations made close to the solar surface indicate a large positive acceleration of CMEs to a heliocentric distance of approx.3 Rs before they start slowing down due to the drag force. The inferred acceleration (approx.1.5 km/s/s) is consistent with reported values in the literature.

Gopalswamy, Natchimuthuk↗

Coronal Magnetic Field Measurement Using CME-Driven Shock Observations

Collisionless shocks form ahead of coronal mass ejections (CMEs) when the CME speed exceeds the Alfven speed of the ambient plasma in the corona and interplanetary medium. The shock stands at a distance from the CME flux rope that depends on the shock Mach number, the geometry of the driver, and the adiabatic index. While the shock ahead of the CME has been observed for a long time in the in situ data, it has been identified recently near the Sun in the coronagraphic and EUV images. Unlike in situ observations, the imaging observations are two dimensional, so one can better discern the CME-shock relationship near the Sun. Gopalswamy and Yashiro demonstrated that the coronal magnetic field can be derived from the shock standoff distance measured in coronagraphic images. The method involves measuring the standoff distance, the radius of curvature of the flux rope, and assuming the value of the adiabatic index and deriving the Alfvenic Mach number. The next step is to derive the Alfvenic Mach number from the measured shock speed and an estimate of the local solar wind speed. The final step involves deriving the magnetic field from the Alfven speed by measuring the local plasma density either from coronagraphic (polarized brightness) images or from the band-splitting of type II radio bursts. In this paper, we derive the combined magnetic field profile from near the Sun to the edge of the LASCO field of view (1.5 to 30 solar radii) and compare it with the current model profiles.

Gopalswarmy, Nat↗

Modeling of Coronal Mass Ejections that Caused Particularly Large Geomagnetic Storms Using ENLIL Heliosphere Cone Model

In our previous paper we reported the results of modeling of 14 selected well -observed strong halo coronal mass ejection (CME) events using the WSA -ENLIL cone model combination. Cone model input parameters were obtained from white light coronagraph images of the CME events using the analytical method developed by Xie et al. This work verified that coronagraph input gives reasonably good results for the CME arrival time prediction. In contrast to Taktakishvili et al., where we started the analysis by looking for clear CME signatures in the data and then proceeded to model the interplanetary consequences at 1 AU, in the present paper we start by generating a list of observed geomagnetic storm events and then work our way back to remote solar observations and carry out the corresponding CME modeling. The approach used in this study is addressing space weather forecasting and operational needs. We analyzed 36 particularly strong geomagnetic storms, then tried to associate them with particular CMEs using SOHO/LASCO catalogue, and finally modeled these CMEs using WSA-ENLIL cone model. Recently, Pulkkinen et al. developed a novel method for automatic determination of cone model parameters. We employed both analytical and automatic methods to determine cone model input parameters. We examined the CME arrival times and magnitude of impact at 1 AU for both techniques. The results of the simulations are compared with the ACE satellite observations. This comparison demonstrated that WSA -ENLIL model combination with coronagraph input gives reasonably good results for the CME arrival times for this set of 'geoeffective" CME events as well.

Taktakishvili, A.↗

Beyond Kepler: Direct Imaging of Earth-like Planets

Is there another Earth out there? Is there life on it? People have been asking these questions for over two thousand years, and we finally stand on the verge of answering them. The Kepler space telescope is NASA's first mission designed to study Earthlike exoplanets (exo-Earths), and it will soon tell us how often exo-Earths occur in the habitable zones of their stars. The next natural step after Kepler is spectroscopic characterization of exo-Earths, which would tell us whether they possess an atmosphere, oxygen, liquid water, as well as other biomarkers. In order to do this, directly imaging an exo-Earth may be necessary (at least for Sun-like stars). Directly imaging an exo-Earth is challenging and likely requires a flagship-size optical space telescope with an unprecedented imaging system capable of achieving contrasts of 1(exp 10) very close to the diffraction limit. Several coronagraphs and external occulters have been proposed to meet this challenge and are in development. After first overviewing the history and current state of the field, my talk will focus on the work proceeding at the Ames Coronagraph Experiment (ACE) at the NASA Ames Research Center, where we are developing the Phase Induced Amplitude Apodization (PIAA) coronagraph in a collaboration with JPL. PIAA is a powerful technique with demonstrated aggressive performance that defines the state of the art at small inner working angles. At ACE, we have achieved contrasts of 2(exp -8) with an inner working angle of 2 lambda/D and 1(exp -6) at 1.4 lambda/D. On the path to exo-Earth imaging, we are also pursuing a smaller telescope concept called EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), which was recently selected for technology development (Category III) by NASA's Explorer program. EXCEDE will do fundamental science on debris disks as well as serve as a technological and scientific pathfinder for an exo-Earth imaging mission.

Belikov, Ruslan↗

Mirror Technology Roadmap for NASA's Exoplanet Exploration Program

There are several possible approaches to designing exoplanet missions: (1) Coronagraphs (2) Interferometers (3) Starshades Wavefront sensing and control is the central concern, not mirror size (1) Starlight suppression with deformable mirrors (2) Thermal and structural stability (3) Metrology for sensing and control Diffraction-limited optical primary mirrors 4-m or larger are needed to detect Earthlike planets (1) Surface figure similar to HST required (2) Smaller primary mirrors can be used with aggressive coronagraph designs, but the stability tolerances become the driving concern (3) Stability tolerances of coronagraphs are greatly reduced when larger primaries are used in conjunction with 8th-order masks Long term vision for large telescope development includes space-based segmented-mirror telescopes using actively-controlled glass segments or silicon carbide hybrid-mirror designs

technology↗

STIS Coronagraphy

HST Coronagraphs HST has supported 3 coronagraphs: NICMOS, ACS, and STIS. Bulk of image properties are set by the OTA, but instrumental effects are also present. None of the HST coronagraphs have been optimal:ACS spot size issues, NICMOS parts moving in dewar, STIS incomplete apodization, and lack of peakdown software.

Grady, C. A.↗