Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordination state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

P-block single-metal-site tin/nitrogen-doped carbon fuel cell cathode catalyst for oxygen reduction reaction

This contribution reports the discovery and analysis of a p-block Sn-based catalyst for the electroreduction of molecular oxygen in acidic conditions at fuel cell cathodes; the catalyst is free of platinum-group metals and contains single-metal-atom actives sites coordinated by nitrogen. The prepared SnNC catalysts meet and exceed state-of-the-art FeNC catalysts in terms of intrinsic catalytic turn-over frequency and hydrogen–air fuel cell power density. The SnNC-NH 3 catalysts displayed a 40–50% higher current density than FeNC-NH 3 at cell voltages below 0.7 V. Additional benefits include a highly favourable selectivity for the four-electron reduction pathway and a Fenton-inactive character of Sn. Here, a range of analytical techniques combined with density functional theory calculations indicate that stannic Sn(iv)Nx single-metal sites with moderate oxygen chemisorption properties and low pyridinic N coordination numbers act as catalytically active moieties. The superior proton-exchange membrane fuel cell performance of SnNC cathode catalysts under realistic, hydrogen–air fuel cell conditions, particularly after NH 3 activation treatment, makes them a promising alternative to today’s state-of-the-art Fe-based catalysts.

25 ENERGY STORAGE↗
DOE OSTI2026

Metal-Dependent Photodissociation of Hydrazone Photoswitches from Rare-Earth Complexes

Rare-earth element separation processes often rely on a small decrease in ionic radii along the series of elements. Separation processes based on the distinct optical properties of REs remain less explored, although photochemical methods may offer a viable alternative. Accurate selection of the synthetic precursors of a photoswitchable acylhydrazonic ligand led to a system that could quantitatively isomerize (E−to−Z) upon irradiation with commercial LED lights. Coordination of the photoswitch with RE III nitrates (RE = La−Lu except Pm and Y) resulted in the retention of the photoswitching properties observed in solution. The lower binding affinity of the generated Z−isomer with RE III ions yielded the dissociation of the complexes upon irradiation (photodissociation) with the release of RE−nitrates in solution. The rate of the reaction was found to be dependent on the optical properties of the RE III ions, with nonemissive complexes (no 4f excited states) dissociating faster than emissive ones (having accessible 4f excited states). A thorough solid-state characterization of the complexes was performed by using crystallographic and photochemical methods. Ultimately, the accessibility of the 4f excited states of the metals following light irradiation and excitation of the ligand led to a decrease in the rate of the reaction due to quenching of the ligand excited state. These results demonstrate that the direct modulation of the metal coordination environment, combined with the metal-dependent reaction rate, could provide a strategy for the development of RE−separation processes based on differences in their optical properties.

Ions↗
DOE OSTI2023

Structural and Chemical Evolution of Highly Fluorinated Li‐Rich Disordered Rocksalt Oxyfluorides as a Function of Temperature

Abstract Li‐rich disordered rocksalt (DRS) oxyfluorides have emerged as promising high‐energy cathode materials for lithium‐ion batteries. While a high level of fluorination in DRS materials offers performance advantages, it can only be achieved via mechanochemical synthesis, which poses challenges of reproducibility and scalability. The definition of relationships between fluorination and structural stability is required to devise alternative methods that overcome these challenges. In this study, the thermal evolution of three highly fluorinated phases, Li 2 TMO 2 F (TM = Mn, Co, and Ni), is investigated in an inert atmosphere. Diffraction and spectroscopic techniques are utilized to examine their electronic and chemical states up until conditions of decomposition. The analysis reveals that the materials phase‐separate above 400 °C, at most. It is also observed that heat‐treated DRS materials exhibit intricate changes in the local coordination of the metals, including their spin, and ordering compared to the pristine states. The changes upon annealing are accompanied by a modulation of the voltage profile, including reduced hysteresis, when used as electrodes. These results provide an in‐depth understanding of the fundamental crystal chemistry of DRS oxyfluorides in view of their promising role as the next generation of Li‐ion cathodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Wyoming Carbon Blueprint A Roadmap for Statewide Carbon Capture and Storage

Wyoming stands at a pivotal point in defining its energy future, and the Wyoming Carbon Blueprint positions the state to lead the nation in carbon management through a coordinated buildout of carbon capture, transportation, utilization, and geologic storage. Building on Wyoming’s long history as a major producer of coal, oil, and natural gas, and supported by favorable policies, skilled labor, and robust subsurface resources, the Blueprint outlines a pathway to develop one of the world’s first open-access carbon hubs capable of capturing between 10 and 25 million tonnes of CO₂ per year within five years, and up to 45 million tonnes within a decade. In doing so, it advances the concept of “No Carbon Left Behind”: a statewide strategy that prevents stranded CO₂ by aligning capture, transport, and storage systems into a single coherent infrastructure network.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Support for U.S. Participants at the 18 th International Congress on Catalysis

The 18 th International Congress on Catalysis (ICC) was held Lyon, France on July 14-19, 2024. It provided a premier technical gathering in surface and organometallic catalysis, industrial homogeneous and heterogeneous catalysis, electrocatalysis, photocatalysis, and catalysis in condensed media. This meeting brough together participants from academia, industry, and national laboratories. The organization that overseed this meeting was the Council of the International Congress on Catalysis. This international committee has over 27 signature countries. The United States is represented in the Council of the International Congress on Catalysis through two permanent representatives. These representatives are elected by the Board of Directors of the North American Catalysis Society (NACS), an organization which coordinates and overseas the activities of 12 largely autonomous clubs within the United States, Canada, and Mexico. The critical importance of catalysis is reflected by the fact that 25-30% of all manufactured goods in the United States involve at least one catalytic step. Because advances in a large number of catalytic processes, which are crucial to U.S. interests, were presented at this meeting, it was important to ensure participation from both the U.S. academic and the industrial sectors.

02 PETROLEUM↗
DOE OSTI2026

Blueprint: Coordinated Vulnerability Disclosure (CVD) Adaption and Adoption Guide for Industry To Create Their Own CVD Program

This guide provides a series of steps and guidance for electric vehicle supply equipment (EVSE) industry members to set up their own coordinated vulnerability disclosure (CVD) program by utilizing the Software Engineering Institute/Computer Emergency Response Team (SEI/CERT)’s CVD how-to guide. Due to the complexity of CVD, and with the existing resources out there, this guide is intended that this portion of the blueprint is an extension of the CVD how-to guide, not meant as a replacement. This guide is meant to outline a process for what to do when you discover a vulnerability on EVSE equipment. It is written for developers, vendors and security researchers as well as management. This is not a technical document. It is meant to be accessible for both technical and non-technical roles.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1989

Modal techniques for analyzing airplane dynamics

A series of techniques are presented for analyzing airplane control and output characteristics. State-space matrix equations describing the linear perturbation dynamics are transformed from physical coordinates into scaled, modal coordinates. Techniques for analyzing the impacts of system inputs on the fundamental modes of motion and the appearance of these modes in the system outputs are explained. Scaled modal matrices are used to compute steady-state control inputs which optimize the steady-state response of selected system outputs. Graphics which promote quick understanding of the analysis are presented to display the resulting vectors and matrices. The defined analysis techniques are applied to an example airplane model, illustrating the insight which can be acquired using the described modal techniques.

Arbuckle, P. Douglas↗
DOE OSTI2022

Tailoring Redox Active Ligands for Probing the Reactivity of Actinides

With this project, we aim to further enhance our understanding of fundamental f-element chemistry, including electronic structure and bonding behaviors. Key project goals include the characterization of actinide complexes bearing redox-active ligands, including those of lower-oxidation state uranium, and examining how structural changes to the ligand and coordination sphere affect structure and bonding. Redox-active and redox non-innocent ligands have been used widely in transition metal chemistry, but uranium complexes with redox-active ligands are surprisingly rare. We recently reported the synthesis of the redox-active ligand, “phen-BIAN” (N,N’-bis(iminophenol)acenaphthene), in an investigation of the electronic behavior of uranium and other actinides. This ligand framework borrows features from two classes of Schiff base ligands—the tetradentate O-N-N-O binding pocket from salens, and the redox-active α-diimine unit and backbone from Ar-BIANs (N,N’-bis[(aryl)imino]acenaphthenes, which can accept up to four electrons upon reduction. To continue this work, the electronics of uranyl and thorium complexes will be probed using the reduced forms of these ligands, using these in the preparation of lower-oxidation state and non-oxo uranium complexes. Additional members of the phen-BIAN family will be synthesized, including naphthol and thiol derivative. With these we can characterize the influence of substitutent groups on the redox activity, coordination geometry, and covalent interactions. The work proposed here entails extensive preparation, structural and spectroscopic characterization, of an array of actinide complexes. This will allow us to address probative questions about the nature of actinide bonding, the degree of covalency, the validity of lanthanides as models for the actinides, hard-soft interactions, magnetic interactions between metals in bimetallic complexes and what combination of electronic and steric affects produce an actinide selective ligand. The latter will assist greatly in providing a benchmark against which to compare and evaluate the distinct behaviors exhibited by 5f-element complexes. This will enable us to learn about the differences in binding between the 4f lanthanides and the 5f elements like uranium and plutonium. Such difference in binding can be exploited in separations and the development of new materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Two-State Reactivity in Iron-Catalyzed Alkene Isomerization Confers σ-Base Resistance

A low-coordinate, high spin (S = 3/2) organometallic iron(I) complex is a catalyst for the isomerization of alkenes. A combination of experimental and computational mechanistic studies supports a mechanism in which alkene isomerization occurs by the allyl mechanism. Importantly, while substrate binding occurs on the S = 3/2 surface, oxidative addition to an η 1 -allyl intermediate only occurs on the S = 1/2 surface. In conclusion, since this spin state change is only possible when the alkene substrate is bound, the catalyst has high immunity to typical σ-base poisons due to the antibonding interactions of the high spin state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

On the Error Covariance Correction Step of an ESKF Attitude Update

The attitude states of an error-state Kalman filter (ESKF) behave differently than most other states in the system due to their multiplicative (rather than additive) nature. One way in which they differ is an error covariance correction step after an ESKF error reset, which is not required for, for example, position and velocity states. This covariance correction step is not intuitive, and it has only been recently derived for coordinate transform matrices. The author of this memo, however, found the provided derivation in [1] confusing due to a lack of clarity surrounding the invoked reference frames, and clarity is required as there are at least 4 different ways to parameterize small-angle attitude errors in an ESKF. Furthermore, while reproducing the work, the author of this memo found a more straightforward derivation that provides additional insight into the correction step. This memo offers a derivation of the attitude error covariance correction step of an ESKF, which pays specific attention to the coordinate reference frames.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Electronic Structure of the Complete Series of Gas-Phase Manganese Acetylacetonates by X-ray Absorption Spectroscopy

Metal centers in transition metal–ligand complexes occur in a variety of oxidation states causing their redox activity and therefore making them relevant for applications in physics and chemistry. The electronic state of these complexes can be studied by X-ray absorption spectroscopy, which is, however, due to the complex spectral signature not always straightforward. Here, we study the electronic structure of gas-phase cationic manganese acetylacetonate complexes Mn(acac) 1–3 + using X-ray absorption spectroscopy at the metal center and ligand constituents. The spectra are well reproduced by multiconfigurational wave function theory, time-dependent density functional theory as well as parameterized crystal field and charge transfer multiplet simulations. This enables us to get detailed insights into the electronic structure of ground-state Mn(acac) 1–3 + and extract empirical parameters such as crystal field strength and exchange coupling from X-ray excitation at both the metal and ligand sites. By comparison to X-ray absorption spectra of neutral, solvated Mn(acac) 2,3 complexes, we also show that the effect of coordination on the L 3 excitation energy, routinely used to identify oxidation states, can contribute about 40–50% to the observed shift, which for the current study is 1.9 eV per oxidation state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2021

Inertial Transfer Concept for Autonomous In-Space Assembly

Rocket payload and fairing size have placed strict mass and volume limitations on single launch in-space structures. These limitations are what motivates In-Space Assembly (ISA) and where Inertial Transfer has potential to improve or augment ISA capabilities by utilizing a multiagent autonomous system to transport untethered payloads. The Inertial Transfer concept is presented including autonomy capabilities, potential risks, and three system configurations. These configurations are based on the autonomous system’s available sensor coverage that tracks the payload’s state. Participating agents have well-defined roles, expectations, and assumptions in their physical organization and coordination of actions depending the mode of operation. The sensor information available to participating agents is considered as it affects the uncertainty in the estimated state and the actions required to capture the payload.

Multi-Agent↗
NASA NTRS2021

Inertial Transfer Concept for Autonomous In-Space Assembly

Rocket payload and fairing size have placed strict mass and volume limitations on single launch in-space structures. These limitations are what motivates In-Space Assembly (ISA)and where Inertial Transfer has potential to improve or augment ISA capabilities by utilizing an efficient multi-agent autonomous system to transport untethered payloads. Adoption of an inertial transfer approach significantly reduces system complexity, energy and time needed for assembly compared to conventional ISA capabilities, increasing the likelihood of early adoption for assembly. The Inertial Transfer concept is presented including autonomy capabilities, potential risks, and three system configurations. These configurations are based on the autonomous system’s available sensor coverage that tracks the payload’s state. Participating agents have well-defined roles, expectations, and assumptions in their physical organization and coordination of actions depending the mode of operation. The sensor information available to participating agents is considered as it affects the uncertainty in the estimated state and theactions required to capture the payload.

Multi-Agent↗
NASA NTRS1983

State-of-the-art Theory Application

Nonlinear failure detection and isolation (FDI), robust FDI, coordinate controller, detector, estimator, and isolator, AI/modern systems theory, sensor fusion, and man-machine interaction are addressed.

Gully, S.↗
DOE OSTI2022

Dynamic compression of [100] MgF 2 single crystals: Shock-induced polymorphism to highly coordinated structures

AX 2 -type compounds exhibit a rich and complex series of phase transitions under compression. The high-pressure polymorphism of rutile-type AX 2 difluorides can be characterized by a typical sequence from rutile type → Ca Cl 2 type → HP – Pd F 2 type → cotunnite type . Relative to dioxides, the reduced valence and ionic radius of the F – anion in rutile-type MgF 2 (sellaite) results in lowered transition pressures, making it a useful analog for SiO 2 and other dioxides. In this work, MgF 2 single crystals were shock-compressed along the [100] direction to 24 to 120 GPa using plate impact techniques, and wave profiles were measured using laser interferometry. At low stresses (24 to 44 GPa), we observe features consistent with an elastic–inelastic response, followed by a phase transformation. Peak stress-density states in this stress range are consistent with those expected for the modified fluorite-type (HP- PdF 2 ) phase or a related structure. At higher stresses (69 to 91 GPa), we observe a two-wave structure with peak stress-density states consistent with transformation to a denser and likely more highly coordinated phase such as the cotunnite-type structure. Furthermore, at 120 GPa, only a single wave structure is observed, indicating that the wave profile features observed at lower stresses are overdriven.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Actinium chelation and crystallization in a macromolecular scaffold

Abstract Targeted alpha therapy (TAT) pairs the specificity of antigen targeting with the lethality of alpha particles to eradicate cancerous cells. Actinium-225 [ 225 Ac; t 1/2 = 9.920(3) days] is an alpha-emitting radioisotope driving the next generation of TAT radiopharmaceuticals. Despite promising clinical results, a fundamental understanding of Ac coordination chemistry lags behind the rest of the Periodic Table due to its limited availability, lack of stable isotopes, and inadequate systems poised to probe the chemical behavior of this radionuclide. In this work, we demonstrate a platform that combines an 8-coordinate synthetic ligand and a mammalian protein to characterize the solution and solid-state behavior of the longest-lived Ac isotope, 227 Ac [t 1/2 = 21.772(3) years]. We expect these results to direct renewed efforts for 225 Ac-TAT development, aid in understanding Ac coordination behavior relative to other +3 lanthanides and actinides, and more broadly inform this element’s position on the Periodic Table.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2010

Interference Analysis for an Aeronautical Mobile Airport Communications System

The next generation of aeronautical communications for airport surface applications has been identified through a NASA research program and an international collaborative future communications study. The result, endorsed by both the United States and European regulatory agencies is called AeroMACS (Aeronautical Mobile Airport Communications System) and is based upon the IEEE 802.16e mobile wireless standard. Coordinated efforts to develop appropriate aviation standards for the AeroMACS system are now underway within RTCA (United States) and Eurocae (Europe). AeroMACS will be implemented in a recently allocated frequency band, 5091- 5150 MHz. As this band is also occupied by fixed satellite service uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference to the fixed satellite service are under analysis in order to enable the definition of standards that assure that such interference will be avoided. The NASA Glenn Research Center has been involved in this analysis, and the first results of modeling and simulation efforts directed at this analysis are the subject of this paper.12

Wilson, Jeffrey D.↗