Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clifford”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Liquid-Crystal Coats Help Make Flows Visible

Visible indication of transition of boundary layer from laminar to turbulent flow plays important role in aerodynamic tests in wind tunnels and in flight. In newly developed method, liquid-crystal coats used to make visible such features of boundary-layer flows as transitions, separations, and locations of shocks. Changes of color rapid and reversible. For flight applications, provides capability for making transitions visible throughout almost entire altitude and speed ranges of subsonic aircraft. Also applicable to visible indication of supersonic flows and suitable for general use in high- and low-speed wind-tunnel and water-tunnel testing.

Holmes, Bruce J.↗
NASA NTRS1990

Rapid mix concepts for low emission combustors in gas turbine engines

NASA LeRC has identified the Rich burn/Quick mix/Lean burn (RQL) combustor as a potential gas turbine combustor concept to reduce NOx emissions in High Speed Civil Transport (HSCT) aircraft. To demonstrate reduced NOx levels, NASA LeRC soon will test a flametube version of an RQL combustor. The critical technology needed for the RQL combustor is a method of quickly mixing combustion air with rich burn gases. Two concepts were proposed to enhance jet mixing in a circular cross-section: the Asymmetric Jet Penetration (AJP) concept; and the Lobed Mixer (LM) concept. In Phase 1, two preliminary configurations of the AJP concept were compared with a conventional 12-jet radial-inflow slot design. The configurations were screened using an advanced 3-D Computational Fluid Dynamics (CFD) code named REFLEQS. Both non-reacting and reacting analyses were performed. For an objective comparison, the conventional design was optimized by parametric variation of the jet-to-mainstream momentum flux (J) ratio. The optimum J was then employed in the AJP simulations. Results showed that the three-jet AJP configuration was superior in overall mixedness compared to the conventional design. However, in regards to NOx emissions, the AJP configuration was inferior. The higher emission level for AJP was caused by a single hot spot located in the wake of the central jet as it entered the combustor. Ways of maintaining good mixedness while eliminating the hot spot were identified for Phase 2 study. Overall, Phase 1 showed the viability of using CFD analyses to evaluate quick-mix concepts. A high probability exists that advancing mixing concepts will reduce NOx emissions in RQL combustors, and should be explored in Phase 2, by parallel numerical and experimental work.

Talpallikar, Milind V.↗
NASA NTRS1991

Chemical approaches to carbon dioxide utilization for manned Mars missions

Use of resources available in situ is a critical enabling technology for a permanent human presence in space. A permanent presence on Mars, e.g., requires a large infrastructure to sustain life under hostile conditions. As a resource on Mars, atmospheric CO2 is as follows: abundant; available at all points on the surface; of known presence; chemically simple; and can be obtained by simple compression. Many studies focus on obtaining O2 and the various uses for O2 including life support and fuel; discussion of CO, the coproduct from CO2 fixation revolves around its uses as a fuel, being oxidized back to CO2. Several new proposals are studied for CO2 fixation through chemical, photochemical, and photoelectrochemical means. For example, the reduction of CO2 to hydrocarbons such as acetylene (C2H2) can be accomplished with H2. C2H2 has a theoretical vacuum specific impulse of approx. 375 secs. Potential uses were also studied of CO2, as obtained or further reduced to carbon, as a reducing agent in metal oxide processing to form metals or metal carbides for use as structural or power materials; the CO2 can be recycled to generate O2 and CO.

Hepp, Aloysius F.↗
NASA NTRS1990

Heteroepitaxial InP solar cells on Si and GaAs substrates

The characteristics of InP cells processed from thin layers of InP heteroepitaxially grown on GaAs, on silicon with an intervening GaAs layer, and on GaAs with intervening Ga(x)In(1-x)As layers are described, and the factors affecting cell efficiency are discussed. Under 10 MeV proton irradiations, the radiation resistances of the heteroepitaxial cells were superior to that of homoepitaxial InP cells. The superior radiation resistance is attributed to the high dislocation densities present in the heteroepitaxial cells.

Weinberg, Irving↗
NASA NTRS1990

Method and apparatus for positioning a robotic end effector

A robotic end effector and operation protocol for a reliable grasp of a target object irrespective of the target's contours is disclosed. A robotic hand includes a plurality of jointed fingers, one of which, like a thumb, is in opposed relation to the other. Each finger is comprised of at least two jointed sections, and provided with reflective proximity sensors, one on the inner surface of each finger section. Each proximity sensor comprises a transmitter of a beam of radiant energy and means for receiving reflections of the transmitted energy when reflected by a target object and for generating electrical signals responsive thereto. On the fingers opposed to the thumb, the proximity sensors on the outermost finger sections are aligned in an outer sensor array and the sensors on the intermediate finger sections and sensors on the innermost finger sections are similarly arranged to form an intermediate sensor array and an inner sensor array, respectively. The invention includes a computer system with software and/or circuitry for a protocol comprising the steps in sequence of: (1) approach axis alignment to maximize the number of outer layer sensors which detect the target; (2) non-contact contour following the target by the robot fingers to minimize target escape potential; and (3) closing to rigidize the target including dynamically re-adjusting the end effector finger alignment to compensate for target motion. A signal conditioning circuit and gain adjustment means are included to maintain the dynamic range of low power reflection signals.

Hess, Clifford W.↗
NASA NTRS1990

Hypermedia and intelligent tutoring applications in a mission operations environment

Hypermedia, hypertext and Intelligent Tutoring System (ITS) applications to support all phases of mission operations are investigated. The application of hypermedia and ITS technology to improve system performance and safety in supervisory control is described - with an emphasis on modeling operator's intentions in the form of goals, plans, tasks, and actions. Review of hypermedia and ITS technology is presented as may be applied to the tutoring of command and control languages. Hypertext based ITS is developed to train flight operation teams and System Test and Operation Language (STOL). Specific hypermedia and ITS application areas are highlighted, including: computer aided instruction of flight operation teams (STOL ITS) and control center software development tools (CHIMES and STOL Certification Tool).

Ames, Troy↗
NASA NTRS1991

Lessons learned in the development of the STOL intelligent tutoring system

Lessons learned during the development of the NASA Systems Test and Operations Language (STOL) Intelligent Tutoring System (ITS), being developed at NASA Goddard Space Flight Center are presented. The purpose of the intelligent tutor is to train STOL users by adapting tutoring based on inferred student strengths and weaknesses. This system has been under development for over one year and numerous lessons learned have emerged. These observations are presented in three sections, as follows. The first section addresses the methodology employed in the development of the STOL ITS and briefly presents the ITS architecture. The second presents lessons learned, in the areas of: intelligent tutor development; documentation and reporting; cost and schedule control; and tools and shells effectiveness. The third section presents recommendations which may be considered by other ITS developers, addressing: access, use and selection of subject matter experts; steps involved in ITS development; use of ITS interface design prototypes as part of knowledge engineering; and tools and shells effectiveness.

Seamster, Thomas↗
NASA NTRS1990

Long-term propellant/material compatibility

More than 400 test capsules containing liquid propellants in contact with metallic and nonmetallic specimens are now approaching twenty years in JPL's temperature controlled storage facility. A testing program is being established for the systematic analysis of at least half of those capsules. In addition, the results are reported of about 40 recent analyses.

Clifford M. Moran↗
NASA NTRS1990

Helium Saturation of Liquid Propellants

The research is in three areas which are: (1) techniques were devised for achieving the required levels of helium (He) saturation in liquid propellants (limited to monomethylhydrazine (MMH) and nitrogen tetroxide (NTO)); (2) the values were evaluated for equilibrium solubilities of He in liquid propellants as currently used in the industry; and (3) the He dissolved in liquid propellants were accurately measured. Conclusions drawn from these studies include: (1) Techniques for dissolving He in liquid propellants depending upon the capabilities of the testing facility (Verification of the quantity of gas dissolved is essential); (2) Until greater accuracy is obtained, the equilibrium solubility values of He in MMH and NTO as cited in the Air Force Propellant Handbooks should be accepted as standard (There are still enough uncertainties in the He saturation values to warrant further basic experimental studies); and (3) The manometric measurement of gas volume from a frozen sample of propellant should be the accepted method for gas analysis.

Yavrouian, A. H.↗
NASA NTRS1991

Chemical approaches to carbon dioxide utilization for manned Mars missions

Utilization of resources available in situ is a critical enabling technology for permanent human presence in space. A permanent presence on Mars, for example, requires a tremendous infrastructure to sustain life under hostile conditions (low oxygen, partial pressure, ultraviolet radiation, low temperature, etc.). There are numerous studies on the most accessible of Martian resources: atmospheric carbon dioxide. As a resource on Mars, atmospheric CO2 is: (1) abundant; (2) available at all points on the surface; (3) of known presence, requiring no precursor mission to verify; (4) chemically simple; and (5) can be obtained by simple compression, with no requirements of mining or beneficiation equipment operation. Several novel proposals are presented for CO2 fixation through chemical, photochemical, and photoelectrochemical means.

Hepp, Aloysius F.↗
NASA NTRS1991

Can the starpatch on Xi Bootis A be explained by using tangential flows?

It is demonstrated that a modification of the starpatch model of Toner and Gray (1988), using tangential flows instead of an enhanced granulation velocity dispersion within the patch, is very successful at reproducing both the observed line asymmetry and the line broadening variations observed in the G8 dwarf Xi Boo A. Areal coverage of 10 percent + or - 3 percent of the visible disk, latitude 30 deg + or - 4 deg, mean brightness 0.85 + or - 0.05 relative to the 'quiet' photosphere, mean tangential flow velocities of 8.0 + or - 1.5 km/s, and dispersions about the mean of 8/0 + or - 2.0 km/s are inferred for the patch. A feature at a latitude of about 30 deg is inferred which covers about 10 percent of the visible disk and is 10-20 percent fainter than the rest of the photosphere. It is inferred that 70-80 percent of the patch is penumbra.

Toner, Clifford G.↗
NASA NTRS1990

Component and prototype panel testing of the mini-dome Fresnel lens photovoltaic concentrator array

The mini-dome Fresnel lens concentrator array, a high-efficiency, lightweight space photovoltaic array concept, is described. The three critical elements of the array concept are the Fresnel lens concentrator, the prismatic cell power cover, and the photovoltaic cell. Prototype concentrator lenses have been fabricated and tested, with optical efficiencies reaching 90 percent. Work is progressing on the design and fabrication of the panel structure. The impact of recent advances in 30 percent-efficient multijunction photovoltaic cells on array performance is also discussed. Near-term performance goals of 300 w/sq m and 100 w/kg are now feasible.

Piszczor, Michael F.↗
NASA NTRS1991

Flight experiments measuring boundary-layer disturbances in laminar flow and correlation with stability analysis

Flight test results are reported from an experiment designed to study the detailed growth of disturbances in the laminar boundary layer. A gloved wing section incorporating closely-spaced flush-mounted streamwise-located instrumentation for measuring instability frequencies and amplitude growths as well as pressure distributions was used. The growth of Tollmien-Schlichting (T-S) and crossflow instabilities is predicted by the linear e exp n method and compared to the measured boundary-layer disturbance frequencies. The predictions showed good agreement with the measured data. The results exhibited fair agreement with previous n(T-S) and n(CF) flight correlations for several of the conditions analyzed. It is inferred from the high n(T-S) values for these data that moderately swept wings at compressible speeds can withstand higher combinations of n(T-S) and n(CF) values and still remain laminar than previously thought.

Lee, Cynthia C.↗
NASA NTRS1990

Boundary-layer stability analysis of flight-measured transition data

Correlation of in-flight boundary-layer transition experiments with linear boundary-layer stability theory contributes both to the validation of the numerical methods as well as the analysis of the measured transition process. Transition results obtained in a recent flight experiment, in which the extent of laminar flow and the transition process on the wing of a business-jet fitted with an instrumented glove section were determined, are analyzed. The experiment was conducted at freestream Mach numbers from 0.55 to 0.82, chord Reynolds numbers from 10 to 20 x 10 to the 6th, and leading-edge sweep angles 17 deg to 20 deg. The growth of both Tollmien-Schlichting and crossflow instabilities are predicted using the e exp n method for several flight conditions and the calculated n-factors at transition onset are correlated. Comparison of the measured dominant boundary-layer disturbance frequencies and the predicted unstable frequencies shows fair agreement for several of the flight conditions studied.

Obara, Clifford J.↗
NASA NTRS1990

Flight experiments studying the growth of the disturbances in the laminar boundary layer

Results are presented from flight experiments conducted on a gloved aircraft wing surface, incorporating closely-spaced flush-mounted and streamwise-located instrumentation for instability frequencies and pressure distributions, which studied the growth of disturbances in the laminar boundary layer. Mach numbers up to 0.81 were encountered in order to obtain compressible-condition measurements; this exploration therefore encompassed chord Reynolds number conditions of the order of 10-20 million, as well as the introduction of sweep via sideslip maneuvers, and the effects of cloud particles.

Lee, Cynthia C.↗
NASA NTRS1991

In-flight off-surface flow visualization using infrared imaging

A light test investigation was conducted to evaluate an infrared (IR) imaging technique to visualize off-surface flow phenomena. A single-engine, general-aviation airplane was equipped with an IR imaging system that viewed the region around the left wingtip. Vortical flow at the wingtip was seeded with surfur hexafluoride, a gas with strong infrared absorbing and emitting characteristics. Different terrain and sky backgrounds were evaluated for their effect on IR images of vortical flow. The best IR images were obtained with a clear background. The results of the investigation indicate that IR flow visualization compliments existing smoke generator methods for off-surface flow visualization.

Manuel, Gregory S.↗
NASA NTRS1991

Analysis of flight-measured boundary-layer stability and transition data

The paper concentrates on the computational analysis of both the Tollmien-Schlichting and crossflow-type instabilities using the results of a boundary-layer transition flight experiment on a smooth swept test surface. In addition, the effect of nonadiabatic wall conditions is analyzed using the measured surface temperature distribution on the boundary-layer development and stability growth. The computational methods utilized in analyzing the boundary-layer stability characteristics are discussed: one approach analyzes the Tollmien-Schlichting and crossflow instabilities independently with maximum Tollmien-Schlichting n-factors near nine and maximum crossflow n-factors near six at transition onset for separate cases, while the second approach analyzes the instabilities for maximum growth regardless of the type. As much as a 27-percent increase in n-factor is found at transition onset due to an increased Tollmien-Schlichting instability.

Obara, Clifford J.↗
NASA NTRS1990

Developments in flow visualization methods for flight research

With the introduction of modern airplanes utilizing laminar flow, flow visualization has become an important diagnostic tool in determining aerodynamic characteristics such as surface flow direction and boundary-layer state. A refinement of the sublimating chemical technique has been developed to define both the boundary-layer transition location and the transition mode. In response to the need for flow visualization at subsonic and transonic speeds and altitudes above 20,000 feet, the liquid crystal technique has been developed. A third flow visualization technique that has been used is infrared imaging, which offers non-intrusive testing over a wide range of test conditions. A review of these flow visualization methods and recent flight results is presented for a variety of modern aircraft and flight conditions.

Holmes, Bruce J.↗