Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clamp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Nonlinear panel response by a Monte Carlo approach

The vibration of clamped and simply supported elastic panels due to subsonic and supersonic turbulent boundary-layer flows is investigated by a Monte Carlo technique. The resulting generalized random forces are simulated numerically from boundary-layer turbulence spectra, and the response analysis is performed in the time domain. The mutual interaction between panel motion and external and/or internal airflow is included. Response studies are performed with respect to rms response, probability structure, peak distribution, threshold crossing and spectral density. The effect on the response statistics of in-plane loading, static pressure differential, and cavity pressure is investigated.

Vaicaitis, R.↗
NASA NTRS1974

Evaluation of experimental methods for determining dynamic stiffness and damping of composite materials

Various methods potentially usable for determining dynamic stiffness and damping of composite materials are reviewed. Of these, the following most widely used techniques are singled out for more detailed discussion: free vibration, pulse propagation, and forced vibration response. To illustrate the usefulness and validity of dynamic property data, their application in dynamic analyses and comparison with measured structural response are described for the following composite-material structures: free-free sandwich beam with glass-epoxy facings, clamped-edge sandwich plate with similar facings, free-end sandwich conical shell with similar facings, and boron-epoxy free plate with layers arranged at various orientations.

Bert, C. W.↗
NASA NTRS1975

Film mounting method for thermomechanical analysis

Mounting clamps attach polymeric film sample to thermomechanical analyzer. Using this technique, temperature at which polymer passes from relatively nonflexible or glasslike state to rubbery condition where it exhibits marked increase in flow properties is readily determined.

Burks, H. D.↗
NASA NTRS1974

Ultrasonic bone densitometer

A device, for measuring the density of a bone structure so as to monitor the calcium content, is described. A pair of opposed spaced ultrasonic transducers are held within a clamping apparatus closely adjacent the bone being analyzed. These ultrasonic transducers incude piezoelectric crystals shaped to direct signals through the bone encompassed in the heel and finger of the subject being tested. A pulse generator is coupled to one of the transducers and generates an electric pulse for causing the transducers to generate an ultrasonic sound wave which is directed through the bone structure to the other transducer. An electric circuit, including an amplifier and a bandpass filter couples the signals from the receiver transducer back to the pulse generator for retriggering the pulse generator at a frequency proportional to the duration that the ultrasonic wave takes to travel through the bone structure being examined.

Hoop, J. M.↗
NASA NTRS1975

Design and fabrication of a flexible tunnel for Sortie Laboratory

A program was conducted to update a prototype design and to fabricate a flexible tunnel for a space shuttle/spacelab interface structure. The significant changes in the prototype are as follows: (1) elimination of foam from bladder laminate to increase bladder flexibility, (2) heat treat pulley brackets, bolts, and hinge pin to 160,000 psi minimum tensile strength, and (3) reduction of the meteoroid barrier from 0.5 inch to 0.375 inch. The thermal blanket installation study resulted in developing a method of installation by properly folding the various layers so that a uniform thickness could be maintained under the clamps. A single-lobe mockup was fabricated and cycled open and closed several times with no apparent damage to the blanket.

Source record↗
NASA NTRS1975

Method of making dished ion thruster grids

A pair of flat grid blanks are clamped together at their edges with an impervious metal sheet on top. All of the blanks and sheets are dished simultaneously by forcing fluid to inflate an elastic sheet which contacts the bottom grid blank. A second impervious metal sheet is inserted between the two grid blanks if the grids have high percentage open areas. The dished grids are stress relieved simultaneously.

Banks, B. A.↗
NASA NTRS1975

Ultrasonically bonded value assembly

A valve apparatus capable of maintaining a fluid-tight seal over a relatively long period of time by releasably bonding a valve member to its seat is described. The valve member is bonded or welded to the seat and then released by the application of the same energy to the bond joint. The valve member is held in place during the bonding by a clamping device. An appropriate force device can activate the opening and closing of the valve member. Various combinations of material for the valve member and valve seat can be utilized to provide an adequate sealing bond. Aluminum oxide, stainless steel, inconel, tungsten carbide as hard materials and copper, aluminum, titanium, silver, and gold as soft materials are suggested.

Salvinski, R. J.↗
NASA NTRS1975

Analytical and experimental study of two concentric cylinders coupled by a fluid gap

From a structural point of view a liquid coolant type nuclear reactor consists of a heavy steel vessel containing the core and related mechanical components and filled with a hot fluid. This vessel is protected from the severe environment of the core by a shielding structure, the thermal liner, which is usually a relatively thin steel cylinder concentric with the reactor vessel and separated from it by a gap filled with the coolant fluid. This arrangement leads to a potential vibration problem if the fundamental frequency, or one of the higher natural vibration frequencies, of this liner system is close to the frequency of some vibration source present in the reactor vessel. The shell rigidly clamped at its base and free at the top was investigated since it is a better description of the conditions encountered in typical reactor designs.

Mulcahy, T. M.↗
NASA NTRS1975

On development of a sealed bearing for space suits

The work to correct several design deficiencies present in the bearings used in the orbital extravehicular spacesuit is reported. These deficiencies included: difficult stitch-on interface between fabric and outer race; a tendency for the clamping threads to seize; and, most importantly, the failure of the sealing surfaces (Teflon seat, Delrin seal) to maintain integrity with cycling. The first problem was corrected by raising the stitch-on holes so as to be more accessible. The seizing was eliminated by changing to a coarser thread, from 32/inch to 24/inch. The solution to the sealing problem required a materials evaluation, candidate material selection, and adhesive evaluation (for bonding the seat material to the outer race) and bench-cycling of candidate seal/seat combinations. The final configuration, successfully bench-cycled and delivered to NASA, is shown.

Rayfield, J.↗
NASA NTRS1974

Static aeroelasticity and the flying wing, revisited

The roll dynamic behavior of some wing configurations is examined. Analysis shows that the static divergence instability which occurs for symmetrical or clamped sweptforward wings is modified by roll freedom. The instability found in the present highly idealized analysis is still of an aperiodic nature, but at a speed above the conventional divergence speed. The magnitude of this difference is seen to be a function of the ratio of the wing roll mass moment of inertia to the mass moment of inertia of the wing about the roll axis, and this difference may be quite significant.

Weisshaar, T. A.↗
NASA NTRS1975

On an integro-differential equation model for the study of the response of an acoustically coupled panel

The response of a clamped panel to supersonically convected turbulence is considered. A theoretical model in the form of an integro-differential equation is employed that takes into account the coupling between the panel motion and the surrounding acoustic medium. The kernels of the integrals, which represent induced pressures due to the panel motion, are Green's functions for sound radiations under various moving and stationary sources. An approximate analysis is made by following a finite-element Ritz-Galerkin procedure. Preliminary numerical results, in agreement with experimental findings, indicate that the acoustic damping is the controlling mechanism of the response.

Yen, D. H. Y.↗
NASA NTRS1975

Spacecraft charging control demonstration at geosynchronous altitude

ATS-6, which was launched on May 30, 1974, has now completed its first eclipse season. Potentials as great as 11,000 volts were observed between the spacecraft and ambient plasma. Both ATS-5 and 6 have ion engine experiments onboard. These experiments have been used to clamp the spacecraft potential slightly negative when emitting an ion beam and momentarily discharge the spacecraft when only operating the ion engine's neutralizing electron source. Descriptions of the neutralizer's operation and their effect on potential are presented. In addition, spacecraft charging data for ATS-5 and 6 are presented and correlated over the same eclipse season.

Bartlett, R. O.↗
NASA NTRS1975

Design considerations in the creation and maintenance of electrostatic cleanliness for solar electrically propelled spacecraft

Charge build-up on spacecraft surfaces and resulting zones of electrostatic contamination have been examined for electrically active and electrically passive spacecraft with both conducting and dielectric surface materials, illuminated and nonilluminated surface conditions, and for both inclusion and neglect of free charge effects from photocurrents and ambient space plasma particles. Techniques for measurement and reduction of electrostatic contamination zone extent have been developed for spacecraft with charge release capability. Indicated limitations for contamination cleanup are about 1 volt potential variation from spacecraft to ambient plasma. Bandwidths of electrostatic monitoring and clamping devices extend to several hundred kilohertz for both DC and 'broadband' AC electrostatic cleanliness.

Sellen, J. M., Jr.↗
NASA NTRS1975

Panel flutter optimization by gradient projection

A gradient projection optimal control algorithm incorporating conjugate gradient directions of search is described and applied to several minimum weight panel design problems subject to a flutter speed constraint. New numerical solutions are obtained for both simply-supported and clamped homogeneous panels of infinite span for various levels of inplane loading and minimum thickness. The minimum thickness inequality constraint is enforced by a simple transformation of variables.

Pierson, B. L.↗
NASA NTRS1975

Laser tuners using circular piezoelectric benders

The paper presents the results of an experimental evaluation of a new type of piezoelectric ceramic device designed for use as a laser mirror tuner. Thin plates made from various materials were assembled into a circular bimorph configuration and tested for linearity of movement, maximum travel, and resonant frequency for varying conditions of clamping torque and mirror loading values. Most of the devices tested could accept mirror diameters up to approximately 1.3 cm and maintain a resonant frequency above 2 kHz. Typical mirror translation without measurable tilt was plus or minus 20 micrometers or greater for applied voltages of less than plus or minus 300 V.

Mcelroy, J. H.↗
NASA NTRS1975

Nonlinear resonances in a class of multi-degree-of-freedom systems

An analysis is presented of the superharmonic, subharmonic, and combination resonances in a multi-degree-of-freedom system which has cubic nonlinearity and modal viscous damping and is subject to harmonic excitation. It is shown that, in the absence of internal resonances, the steady-state response contains only the modes which are directly excited. It is shown that, in the presence of internal resonances, modes other than those that are directly excited can appear in the response. The strong influence of internal resonances is exhibited in numerical examples involving hinged-clamped beams. It is shown that when a multimode solution exists the lowest mode can dominate the response, even when it is not directly excited.

Sridhar, S.↗
NASA NTRS1975

Non-linear resonances in the forced responses of plates. I - Symmetric responses of circular plates

The dynamic analogue of the von Karman equations is used to study the symmetric response of a circular plate to a harmonic excitation when the frequency of the excitation is near one of the natural frequencies. It is shown that, in general, when there is no internal resonance (i.e., the natural frequencies are not commensurable), only the mode having a frequency near that of the excitation is strongly excited (i.e., is needed to represent the response in the first approximation). A clamped, circular plate is used as a numerical example to show that, when there is an internal resonance, more than one of the modes involved in this resonance can be strongly excited; moreover, when more than one mode is strongly excited, the lower modes can dominate the response, even when the frequency of the excitation is near that of the highest mode. This possibility was not revealed by any of the earlier studies which were based on the same governing equations.

Sridhar, S.↗
NASA NTRS1977

Ultrasonic monitoring of crack extension

System consisting of commerical ultrasonic flaw detector with transducer clamped to specimen and x-yy' recorder provides permanent record of crack extension, resulting in clear indication of onset of cracking that is relatively insensitive to plastic deformation.

Kliman, S. J.↗