Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “channel estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Mitigating Interference from Urban Air Mobility Vehicles on Satellite Communication Links by Using Vortex Radiometry

Vortex radiometers (VRs) establish an early warning system for communication channels by generating concentric annular beam patterns around the active link. Peaks in received power are monitored as interfering signals traverse overhead, allowing the VR to estimate source velocity. From this information the VR determines 1) when a fade will occur, 2) how long the fade will persist for and 3) how intense the fade will be. This paper demonstrates how VRs can increase the resilience of communication systems used in urban air mobility applications.

Schemmel, Peter J.↗

Mode-Based Sensing and Actuation Techniques for Multi-Objective Flexible Aircraft Control

Intelligent sensing and actuation designs are explored as a means to improve performance of a gust load alleviation control design for a flexible wing aircraft equipped with wing-shaping control surfaces. The proposed techniques rely on identification of the dominant structural modes during specified flight conditions and uses them as a basis for sensor placement and actuator utilization. Specifically, a strategy for sensor placement is discussed that uses target mode shape capture as a mean to improve state estimation quality. A second strategy that reduces the number of wing-shaping control inputs using mode and objective-based shape functions as virtual input channels is also presented. Both techniques are demonstrated in simulation of a flexible wing transport aircraft utilizing a multi-objective control system designed to suppress flexible motion, minimize gust and maneuver load, and reduce drag.

Hashemi, Kelley E.↗

Where IMERG Goes Next: Version 08 and Beyond

With the Version 07 (V07) Integrated Multi-satellitE Retrievals for GPM (IMERG) algorithm finalized and production initiated, the focus turns to enhancements for Version 08. These include innovations not included in V07 due to time constraints, plus issues revealed by the initial V07 products. One high priority is to evaluate and revise the schemes in V07 that rectify temporal artifacts caused by the time interpolation that fills the gaps between the various passive microwave (PMW) sensor overpasses. A second priority is to improve the homogeneity between the TRMM and GPM eras by characterizing differences between the two eras, determining the causes of these differences, and applying corrections as feasible, perhaps by enforcing spatial scale consistency (an overarching issue). Certainly, we must account for GPROF and the Combined Radar-Radiometer Algorithm converting to Machine Learning schemes in V08. Other priority topics include additional automated quality control for artifacts in the IR brightness temperatures and PMW precipitation fields, revisions to the specification algorithm for the probability of liquid precipitation, and accommodating new PMW sensors, which include the next generation of small-sats. We also consider the post-V08 landscape; the final GPM reprocessing will be restricted to fixing known code or algorithmic errors. Nonetheless, there are several data sources on the horizon to consider, including more small-sat PMW radiometers, AVHRR-based precipitation estimates (most useful in high latitudes), and the ISCCP-Next Generation and GEO-Ring projects that could provide easy access to multiple geosynchronous satellite channels and enable significantly improved algorithms compared to GEO-IR alone.

George J. Huffman↗

Evaluation of Systematic Errors on Polarization Parameters from POLDER Instrument Data for Use In CLARREO Pathfinder-VIIRS Intercalibration

One of the CLARREO Pathfinder (CPF) mission’s science objectives is to intercalibrate the reflective solar bands of the NOAA-20 VIIRS instrument against high-accuracy CPF measurements utilizing coincident, co-angled, and co-located footprints acquired over diverse Earth targets. To alleviate the effect of high polarization sensitivity of select VIIRS channels on intercalibration analysis, the CPF team will limit the intercalibration footprints over low-polarized scene types, which will be identified based on an empirical estimation of their degree and angle of polarization (DOP and AOP) using POLDER data. This paper describes the methodology for evaluating systematic errors in the estimation of DOP and AOP for Earth-reflected radiances using POLDER’s polarized bands and investigates their potential impact on CPF-VIIRS intercalibration uncertainty. The systematic errors were found to be less than 0.01 for DOP and less than 2.2 deg. for AOP, which will have a negligible impact on CPF-VIIRS intercalibration uncertainty.

polarization↗

Mitigating Photon Jitter in Optical PPM Communication

A theoretical analysis of photon-arrival jitter in an optical pulse-position-modulation (PPM) communication channel has been performed, and now constitutes the basis of a methodology for designing receivers to compensate so that errors attributable to photon-arrival jitter would be minimized or nearly minimized. Photon-arrival jitter is an uncertainty in the estimated time of arrival of a photon relative to the boundaries of a PPM time slot. Photon-arrival jitter is attributable to two main causes: (1) receiver synchronization error [error in the receiver operation of partitioning time into PPM slots] and (2) random delay between the time of arrival of a photon at a detector and the generation, by the detector circuitry, of a pulse in response to the photon. For channels with sufficiently long time slots, photon-arrival jitter is negligible. However, as durations of PPM time slots are reduced in efforts to increase throughputs of optical PPM communication channels, photon-arrival jitter becomes a significant source of error, leading to significant degradation of performance if not taken into account in design. For the purpose of the analysis, a receiver was assumed to operate in a photon- starved regime, in which photon counts follow a Poisson distribution. The analysis included derivation of exact equations for symbol likelihoods in the presence of photon-arrival jitter. These equations describe what is well known in the art as a matched filter for a channel containing Gaussian noise. These equations would yield an optimum receiver if they could be implemented in practice. Because the exact equations may be too complex to implement in practice, approximations that would yield suboptimal receivers were also derived.

Moision, Bruce↗

Mean pressure distribution and geostrophic circulation in the meteor zone

Boutko et al., used available satellite radiometer data to estimate 0.1 mb constant pressure heights in the mesosphere and Koshelkov and Kovshova derived, 0.1 to 0.005 mb or 0.1 to 0.001 mb layer thickness from which were compiled height fields of the 0.005 mb and 0.001 mb levels. The close relationship discovered between mean thicknesses and zonal values of atmospheric radiances observed in channel 3000 of the pressure modulated radiometer was used. An analysis of the geopotential height fields in the lower thermosphere of the Southern Hemisphere was carried out by others. The Northern Hemisphere patterns are analyzed herein. The analysis was limited to regions north of 20 N due to poor reliability of the thickness estimates from the radiometer data at low latitudes. These analyses are discussed.

Koshelkov, Yu. P.↗

Remote sensing of temperature profiles in the atmosphere

Methods of regularized and generalized cross validation can be used to estimate the atmosphere's temperature, moisture, and wind structure from a finite number m noisy measurements by meteorological satellites on the intensity of upwelling radiation in selected channel frequencies. The inversion of the equation of radiative transfer is discussed for data obtained by TIROS N satellite.

Osullivan, F.↗

Nimbus-7 Stratospheric and Mesospheric Sounder (SAMS) experiment data user's guide

The Stratospheric and Mesospheric Sounder (SAMS) aboard Nimbus-7 observes infrared radiation from the atmospheric limb. Global upper atmosphere temperature profiles and vertical concentrations of H2O, NO, N2O, CH4 and CO2 are derived from these measurements. The status of all channels was carefully monitored. Temperature and composition were retrieved from the measurements by linearizing the direct equation about an a priori profile and using an optimum statistical estimator to find the most likely solution. The derived temperature and composition profiles are archived on two tape products whose file structure and record formats are described in detail. The gridded retrieved temperature tape (GRID-T) contains daily day and night average temperatures at 62 pressure levels in a 2.5 degree latitude by 10 degree longitude grid extending from 67.5 degrees N to 50 degrees S. The zonal mean methane and nitrous oxide composition tape (ZMT-G) contains zonal mean day and night average CH4 and N2O mixing ratios at 31 pressure levels for 2.5 degrees latitude zones extending from 67.5 degrees N to 50 degrees S.

Taylor, F. W.↗

Performance of the split-symbol moments SNR estimator in the presence of inter-symbol interference

The Split-Symbol Moments Estimator (SSME) is an algorithm that is designed to estimate symbol signal-to-noise ratio (SNR) in the presence of additive white Gaussian noise (AWGN). The performance of the SSME algorithm in band-limited channels is examined. The effects of the resulting inter-symbol interference (ISI) are quantified. All results obtained are in closed form and can be easily evaluated numerically for performance prediction purposes. Furthermore, they are validated through digital simulations.

Shah, B.↗

Calculations of hadronic dissociation of Si-28 projectiles at 14.6A GeV by nucleon emission

An optical potential abrasion-ablation collision model is used to calculate hadronic dissociation cross sections for one, two, and three nucleon removal for the first time for a 14.6A GeV Si-28 beam fragmenting in aluminum, tin, and lead targets. These estimates are compared with recent semiinclusive measurements. Significant differences between some calculated and measured semiinclusive cross sections exist which cannot be resolved without measurements of the exclusive channel hadronic cross sections. Calculations for each exclusive reaction channel contributing to the semiinclusive cross sections are presented and discussed.

Townsend, Lawrence W.↗

Fluid outflows from Venus impact craters - Analysis from Magellan data

Many impact craters on Venus have unusual outflow features originating in or under the continuous ejecta blankets and continuing downhill into the surrounding terrain. These features clearly resulted from flow of low-viscosity fluids, but the identity of those fluids is not clear. In particular, it should not be assumed a priori that the fluid is an impact melt. A number of candidate processes by which impact events might generate the observed features are considered, and predictions are made concerning the rheological character of flows produce by each mechanism. A sample of outflows was analyzed using Magellan images and a model of unconstrained Bingham plastic flow on inclined planes, leading to estimates of viscosity and yield strength for the flow materials. It is argued that at least two different mechanisms have produced outflows on Venus: an erosive, channel-forming process and a depositional process. The erosive fluid is probably an impact melt, but the depositional fluid may consist of fluidized solid debris, vaporized material, and/or melt.

Asimow, Paul D.↗

BOREAS RSS-15 SIR-C and Landsat TM Biomass and Landcover Maps of the NSA

As part of BOREAS, the RSS-15 team conducted an investigation using SIR-C, X-SAR, and Landsat TM data for estimating total above-ground dry biomass for the SSA and NSA modeling grids and component biomass for the SSA. Relationships of backscatter to total biomass and total biomass to foliage, branch, and bole biomass were used to estimate biomass density across the landscape. The procedure involved image classification with SAR and Landsat TM data and development of simple mapping techniques using combinations of SAR channels. For the SSA, the SIR-C data used were acquired on 06-Oct-1994, and the Landsat TM data used were acquired on 02-Sep-1995. The maps of the NSA were developed from SIR-C data acquired on 13-Apr-1994. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗

A 30/20 GHz FSS feasibility study

The near term feasibility of direct-to-subscriber services were determined using the 30/20 GHz Fixed Satellite Service (FSS) frequency bands. Those technologies which need to be further developed before such a system can be implemented, were identified. To determine this feasibility, dozens of potential applications were examined for their near-term viability, and the subscriber base of three promising applications were estimated. The system requirements, terminal design, and satellite architecture were all investigated to determine whether a 30/20 GHz FSS system is technically and economically feasible by mid-1990s. It was concluded that such a system is feasible, although maturation of some technologies is needed. This system would likely consist of one or two multibeam satellites serving hub/spoke networks of simple user terminals and more complex, mutli-channel terminals of the service providers. Rain compensation would be accomplished non-adaptively through the use of coding, nonuniform satellite TWT power that is a function of a beam's anticipated downlink fading, and signal regeneration of traffic to the wettest climate regions. It was estimated that a potential market of almost two million users could exist in in the mid-1990s time frame for home banking and financial services via Ka-band satellites.

Source record↗

Modified superposition: A simple time series approach to closed-loop manual controller identification

Single-channel pilot manual control output in closed-tracking tasks is modeled in terms of linear discrete transfer functions which are parsimonious and guaranteed stable. The transfer functions are found by applying a modified super-position time series generation technique. A Levinson-Durbin algorithm is used to determine the filter which prewhitens the input and a projective (least squares) fit of pulse response estimates is used to guarantee identified model stability. Results from two case studies are compared to previous findings, where the source of data are relatively short data records, approximately 25 seconds long. Time delay effects and pilot seasonalities are discussed and analyzed. It is concluded that single-channel time series controller modeling is feasible on short records, and that it is important for the analyst to determine a criterion for best time domain fit which allows association of model parameter values, such as pure time delay, with actual physical and physiological constraints. The purpose of the modeling is thus paramount.

Biezad, D. J.↗

The study of mesoscale phenomena, winter monsoon clouds and snow area

The author has identified the following significant results. The clouds under a moderate winter monsoon situation taken with S190A camera reveal existence of clouds with band structure of various wavelengths. The wavelength ranges from 0.4 to 3.5 kms. There was a good relationship between the longitudinal cloud band and vertical wind shear. There was a distinct difference in size of clouds between the Japan Sea side or upwind side and the Pacific Ocean side or downwind side of the Japanese mainland. Large solid cumulus clusters have the size of 20 x 35 sq km over the Japan Sea off the coast of Hokuriku District. It was found that S190A aerial color pictures showing shadows of fair weather cumuli over the sea could be successfully used in estimating cloud height while S190A station 1 picture was more useful over the land since it could more clearly distinguish shadow from vegetation. The height of fair weather cumuli estimated from shadows agree with the lifted condensation level. It was also found that these pictures were effectively used in delineating snow cover area. S192 data, especially IR channel, were found to be effective in finding topography of nimbostratus.

Tsuchiya, K.↗

Planning assistance for the NASA 30/20 GHz program. Network control architecture study.

Network Control Architecture for a 30/20 GHz flight experiment system operating in the Time Division Multiple Access (TDMA) was studied. Architecture development, identification of processing functions, and performance requirements for the Master Control Station (MCS), diversity trunking stations, and Customer Premises Service (CPS) stations are covered. Preliminary hardware and software processing requirements as well as budgetary cost estimates for the network control system are given. For the trunking system control, areas covered include on board SS-TDMA switch organization, frame structure, acquisition and synchronization, channel assignment, fade detection and adaptive power control, on board oscillator control, and terrestrial network timing. For the CPS control, they include on board processing and adaptive forward error correction control.

Inukai, T.↗

Sea surface temperatures from VAS MSI data

A procedure is developed for estimating sea surface temperatures from multispectral image data acquired from the VISSR atmospheric sounder on the geostationary GOES satellites. Theoretical regression equations for two and three infrared window channels are empirically tuned using clear field of view satellite radiances matched with reports of SST from NOAA fixed environmental buoys. The empirical regression equations are then used to produce daily regional analyses of SST. Monthly mean SST's for the western North Atlantic and the eastern equatorial Pacific during March and July 1982 were produced for use in the SST Intercomparison Workshop Series. Workshop results showed VAS SST's have a scatter of 0.8-1.0 C and a slight warm bias with respect to the other measurements of SST. The VAS SST's show no discernible bias in the region of El Chichon volcanic aerosol cloud.

Bates, J. J.↗

Physical retrieval of precipitation water contents using multisensor microwave data and model constraints

A physical retrieval method is proposed for estimating precipitation water distributions and other geophysical parameters from the Special Sensor Microwave/Imager (SSM/I) data. In the proposed method, sensor antenna functions are explicitly included to accommodate varying channel resolution. An embedded one-dimensional cloud model is utilized to generate vertical distributions of precipitating and nonprecipitating water, and spectral solutions are sought for certain background parameters, such as humidity, which vary more slowly in the horizontal than the cloud and precipitation water contents. The method allows the incorporation of measurements from SSM/T and geostationary infrared measurements in addition to SSM/I data, as well as information from conventional sources (e.g., radiosondes) or numerical forecast model fields.

Olson, William S.↗