Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Calculation of transonic flow in a linear cascade

Turbomachinery blade designs are becoming more aggressive in order to achieve higher loading and greater range. New analysis tools are required to cope with these heavily loaded blades that may operate with a thin separated region near the trailing edge on the suction surface. An existing, viscous airfoil code was adapted to cascade conditions in an attempt to provide this capability. Comparisons with recently obtained data show that calculated and experimental surface Mach numbers were in good agreement but loss coefficients and outlet air angles were not. Previously announced in STAR as N84-24539

Donovan, L. F.↗
NASA NTRS1984

Optimization and mechanisms of mistuning in cascades

In the present inverse design procedure for the optimum mistuning of a high bypass ratio shroudless fan that is modeled as a cascade of blades (each with a single torsional degree-of-freedom), linearized supersonic aerodynamic theory is used to compute the unsteady aerodynamic forces in the 'influence coefficient' form at a typical blade section. The mistuning pattern is then numerically optimized in order to achieve a specified increase in the aeroelastic stability margin with a minimum amount of mistuning. If the blades are self-damped, an optimized mistuning pattern can be found that achieves a given stability margin for a much lower level of mistuning than required for the alternate mistuning pattern, which requires only two blade frequencies and is relatively insensitive to implementation errors.

Crawley, E. F.↗
NASA NTRS1984

Inverse design technique for cascades

A numerical technique to generate cascades is presented. The basic prescribed parameters are: inlet angle, exit pressure, and distribution of blade thickness and lift along a blade. Other sets of parameters are also discussed. The technique is based on the lambda scheme. The problem of stability of the computation as a function of the prescribed set of parameters and the treatment of boundary conditions is discussed. A one dimensional analysis to indicate a possible way for assuring stability for any two dimensional calculation is provided.

Zannetti, L.↗
NASA NTRS1985

Heat transfer results and operational characteristics of the NASA Lewis Research Center Hot Section Cascade Test Facility

The NASA Lewis Research Center gas turbine hot section test facility has been developed to provide a real-engine environment with well known boundary conditions for the aerothermal performance evaluation/verification of computer design codes. The initial aerothermal research data obtained are presented and the operational characteristics of the facility are discussed. This facility is capable of testing at temperatures and pressures up to 1600 K and 18 atm which corresponds to a vane exit Reynolds number range of 0.5x10(6) to 2.5x10(6) based on vane chord. The component cooling air temperature can be independently modulated between 330 and 700 K providing gas-to-coolant temperature ratios similar to current engine application. Research instrumentation of the test components provide conventional pressure and temperature measurements as well as metal temperatures measured by IR-photography. The primary data acquisition mode is steady state through a 704 channel multiplexer/digitizer. The test facility was configured as an annular cascade of full coverage filmcooled vanes for the initial series of research tests.

Gladden, H. J.↗
NASA NTRS1985

Estimating unsteady aerodynamic forces on a cascade in a three-dimensional turbulence field

An analytical method has been developed to estimate the unsteady aerodynamic forces caused by flow field turbulence on a wind tunnel turning vane cascade system (vane set). This method approximates dynamic lift and drag by linearly perturbing the appropriate steady state force equations, assuming that the dynamic loads are due only to free stream turbulence and that this turbulence is homogeneous, isotropic, and Gaussian. Correlation and unsteady aerodynamic effects are also incorporated into the analytical model. Using these assumptions, equations relating dynamic lift and drag to flow turbulence, mean velocity, and vane set geometry are derived. From these equations, estimates for the power spectra and rms (root mean squared value, delta) loading of both lift and drag can be determined.

Norman, T.↗
NASA NTRS1985

Multiplicity distributions in interaction models used for cascade simulations

In cascade simulations, conservation of energy is of paramount importance. It is pointed out that it is possible to construct algorithms in which energies of secondaries are chosen from physically correct distributions in such a way as to conserve energy, and give physically correct multiplicity distributions without further adjustment. The resulting non-Poissonian nature of the distribution and the approximate KNO scaling are related to the large fluctuations in the energy available for pion production and to the detailed shape of the inclusive momentum distribution. Two multiparticle production algorithms are described which have these features. One is the algorithm used in the simulation of C jets, the other is for a hadron-nucleus interaction model used in the calculation of muon and neutrino fluxes.

Ellsworth, R. W.↗
NASA NTRS1985

Numerical analysis of electromagnetic cascades in emulsion chambers

A new calculational scheme of the Monte Carlo method assigned for the investigation of the development of high and extremely high energy electromagnetic cascades (EMC) in the matter was elaborated. The scheme was applied to the analysis of angular and radial distributions of EMC electrons in the atmosphere. By means of this scheme the EMC development in dense medium is investigated and some preliminary data are presented on the behavior of EMC in emulsion chambers. The results of more detailed theoretical analysis of the EMC development in emulsion chambers are discussed.

Plyasheshnikov, A. V.↗
NASA NTRS1985

Analytical-numerical methods of calculations of energy and three-dimensional particle distributions in electromagnetic cascades

Analytical and numerical methods of calculation of the energy and three dimensional EPS characteristics are reported. The angular and lateral functions of electrons in EPS have been obtained by the Landau and small angle approximations A and B and compared with earlier data. A numerical method of solution of cascade equations for the EPS distribution function moments has been constructed. Considering the equilibrium rms angle as an example, errors appearing when approximating the elementary process cross sections by their asymptotic expressions are analyzed.

Ivanenko, I. P.↗
NASA NTRS1985

Result of Monte-Carlo simulation of electron-photon cascades in lead and layers of lead-scintillator

Results of Monte-Carlo simulation of electromagnetic cascade development in lead and lead-scintillator sandwiches are analyzed. It is demonstrated that the structure function for core approximation is not applicable in the case in which the primary energy is higher than 100 GeV. The simulation data has shown that introducing an inhomogeneous chamber structure results in subsequent reduction of secondary particles.

Wasilewski, A.↗
NASA NTRS1985

Dependence of the average spatial and energy characteristics of the hadron-lepton cascade on the strong interaction parameters at superhigh energies

A method for calculating the average spatial and energy characteristics of hadron-lepton cascades in the atmosphere is described. The results of calculations for various strong interaction models of primary protons and nuclei are presented. The sensitivity of the experimentally observed extensive air showers (EAS) characteristics to variations of the elementary act parameters is analyzed.

Boyadjian, N. G.↗
NASA NTRS1985

Nuclear cascades in electromagnetic showers produced by primary gamma-quanta in the atmosphere

Distributions were calculated for the number of electrons N sub e, number of muons with the energy above 5 GeV N sub mu and the energy of hadron component E sub h in electromagnetic showers, produced by primary gamma-quanta with energies theta approx. equals 30 deg and observed at the mountain level 700 g/square centimeters. The mean number of nuclear interactions of photos with the energy above 5 GeV is about 0.3 per each TeV of the primary energy and nuclear cascades take out in average about 2% of the total shower energy. The mean number of 5 GeV muons for the electromagnetic shower is (2 to 5)% from the number of muons in cosmic ray showers with the same number of electrons at the observation level. similar value for the total energy of hadron component is also (2 to 5)%. N sub mu and N sub e values as well as E sub h and n sub e don't correlate at the fixed primary energy E sug gamma (o). Between N sub mu and E sub h there is a positive correlation at the given E sub gamma.

Danilova, T. V.↗
NASA NTRS1985

Application of thermoluminescence for detection of cascade shower 1: Hardware and software of reader system

A reader system for the detection of cascade showers via luminescence induced by heating sensitive material (BaSO4:Eu) is developed. The reader system is composed of following six instruments: (1) heater, (2) light guide, (3) image intensifier, (4) CCD camera, (5) image processor, (6) microcomputer. The efficiency of these apparatuses and software application for image analysis is reported.

Akashi, M.↗
NASA NTRS1984

A linearized unsteady aerodynamic analysis for transonic cascades

The unsteady airloads generated by the vibrations of turbomachine blades operating at transonic Mach numbers are predicted by a linearized potential flow analysis whose unsteady aerodynamics model encompasses the effects of blade geometry, nonzero mean pressure variation across the blade row, high frequency blade motion, and shock motion, all within the framework of a linearized frequency-domain formulation. A numerical solution for the entire unsteady flow field is determined by matching a solution covering an extended blade passage region to another covering, and extending beyond, the supersonic region(s) adjacent to a blade surface. Results are given for cascades of double circular arc and flat plate blades, in order to demonstrate the unsteady analysis and to partially illustrate the effects of blade geometry, inlet Mach number, vibration frequency and shock motion on unsteady response.

Verdon, J. M.↗
NASA NTRS1984

Time dependent computation of the Euler equations for designing 2-D cascades, including the case of transonic shock free design

A numerical method to solve the inverse problem for airfoil cascades is described. The case of compressible, inviscid flow is considered. The proposed method is based on the finite difference approximation of the time-dependent Euler equations. Numerical examples show the capability of the method to design subsonic or transonic shockless blades.

Zannetti, L.↗
NASA NTRS1985

A closed cycle cascade Joule Thomson refrigerator for cooling Josephson junction magnetometers

A closed cycle cascade Joule Thomson refrigerator designed to cool Josephson Junction magnetometers to liquid helium temperature is being developed. The refrigerator incorporates 4 stages of cooling using the working fluids CF4 and He. The high pressure gases are provided by a small compressor designed for this purpose. The upper stages have been operated and performance will be described.

Tward, E.↗
NASA NTRS1985

A cascaded coding scheme for error control

A cascaded coding scheme for error control was investigated. The scheme employs a combination of hard and soft decisions in decoding. Error performance is analyzed. If the inner and outer codes are chosen properly, extremely high reliability can be attained even for a high channel bit-error-rate. Some example schemes are studied which seem to be quite suitable for satellite down-link error control.

Kasami, T.↗