SEARCH · Engineering Papers

Results for “capital”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Technoeconomic Analysis of the Electrochemically Mediated Amine Regeneration CO 2 Capture Process

The electrochemically mediated amine regeneration (EMAR) process presents an alternative route to the conventional thermal amine regeneration for carbon capture from a flue gas source. In this study, we conducted an economic analysis on the EMAR system for postcombustion CO2 capture from a 550 MWe power plant capturing 3.1 MtCO2 annually and from a mini steel mill with annual capture close to 170 ktCO2. We followed the recommendation of the National Energy Technology Laboratory (NETL) 2010 report to estimate the cost of CO2 avoided ([$/tCO2]). Detailed cost modeling of the electrochemical separation stage was conducted. This is integrated with the entire process flowsheet (e.g., including absorber, compressor, pumps, and other auxiliary equipment). Here, we identified the membrane cost as the dominant capital cost for the electrochemical separation train. At a membrane unit price of less than 10/m2, the CO2 capture cost can be reduced to below 50/tCO2 with optimized process conditions (e.g., desorption pressure and utilization of waste heat). Improvements in process design, cell construction, and solvent formulation may lead to additional reductions in the CO2 capture cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Multiobjective Modular Biorefinery Configuration under Uncertainty

With increasing interest in using biomass as a raw material for fuel, the development of biorefineries is an active area of research. However, increasing market competition, uncertainty, and environmental concerns are a few of the challenges that need to be addressed. In this work, mathematical optimization formulations are proposed to address these challenges simultaneously. A multiobjective deterministic optimization framework is proposed to address economic and environmental objectives. A two-stage stochastic optimization framework is proposed to account for uncertainties in material flow and product yields. To model the environmental objective, an environmental risk metric is proposed. Finally, as modularization is gaining popularity in the process industry due to its ability to save capital cost because of standardization and reduce time to market, a formulation for simultaneously achieving modular process design and biorefinery configuration is proposed. Furthermore, the results demonstrate the efficacy of the proposed approach.

09 BIOMASS FUELS↗

DOE OSTI2021

Pretreatment of Biomass by Selected Type-III Deep Eutectic Solvents and Evaluation of the Pretreatment Effects on Hydrothermal Carbonization

Hydrothermal carbonization (HTC) is a novel thermochemical conversion that converts wet biomass into energy dense solid fuel. Residual moisture under subcritical conditions reacts with a lignin-cellulose-hemicellulose matrix with the major reactions being identified as dehydration and decarboxylation. Among other reaction parameters (e.g., temperature, time, pressure), biomass morphology often plays a key role in HTC. The hypothesis of this study was enhancing the porous structure of biomass without significantly affecting biopolymer composition would augment hydrothermal carbonization (HTC). To prove the hypothesis, two type-III deep eutectic solvents (DESs), namely choline chloride:urea (ChCl:Urea, 1:2 mol/mol) and methyltriphenylphosphonium bromide:ethylene glycol (MTPB:EG, 1:4 mol/mol), were studied to pretreat loblolly pine at room temperature and ambient pressure for 1 h. DES pretreatment shows swelling of the biomass, increasing the surface fiber-to-fiber gap length by 52% and 185% for ChCl:Urea and MPTB:EG pretreatments, respectively. The total pore volume remained intact (2.6 × 10 –3 cm 3 /g), although new small pores evolved, and existing pores were abated with DES pretreatment. Hydrochars prepared from DES pretreated loblolly pine showed a high O/C and H/C ratio resulting in a significant increase of energy content (up to 42%) and a decrease of mass yield (up to 50 wt %), indicating an enhancement of HTC severity due to the alteration of surface morphology by DES. Finally, a preliminary process economics revealed that integrated DES pretreatment-HTC would increase fixed capital investment but decrease the cost of operation and manufacturing than the standalone HTC process.

09 BIOMASS FUELS↗

DOE OSTI2022

Optimization Modeling for Advanced Syngas to Olefin Reactive Systems

Reactor designs with mixed catalysts play an important role in transforming a multiple reactor system to single-shot reactors. In addition to savings in capital and ease of implementation, single-shot reactors are useful to break equilibrium limitations, thereby increasing the yield and selectivity of desired product as shown in previous studies. However, the nonlinear and highly exothermic nature of mixed-catalyst systems makes it difficult for commercial process simulation and optimization tools to optimize these systems. This study describes the development and application of optimization strategies for mixed-catalyst, single-shot reactors for syngas to olefin (STO) processes. Finding the optimal catalyst distribution is challenging and requires advanced solution strategies for singular optimal control problems, which are poorly conditioned and often lead to flat response surfaces. The graded bed and partial-moving finite-element approaches are used to find the optimal catalyst distribution that maximizes the olefins yield. A 1.3% increase in the yield is observed from one zone to three zones. The yield further improves from three zones to the exact infinite dimensional solution by 0.2%. This improvement can be realized in practice by changing only the catalyst distribution, without any extra investment. Lastly, the results suggest that a mixed-catalyst single shot reactor bed can be applied to other reaction mechanisms to increase reactor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Technoeconomic Analysis of Microwave-Assisted Dry Reforming Integrated with Chemical Looping for Production of Methanol

Methanol is a key component in producing formaldehyde, acetic acid, and methyl tert -butyl ether (MTBE) and supports a wide array of industries, including plastics, textiles, and automotive. It also plays a growing role in renewable energy solutions. However, the conventional production of methanol involves steam reforming of methane, which is very energy-intensive and produces significant quantities of the greenhouse gas carbon dioxide. In this research, a chemical looping scheme is combined with dry reforming of natural gas in a novel microwave reactor to produce an industrial quantity of methanol. A heat exchanger network is developed to substantially reduce hot and cold utility usage. The effect of the cost of purchasing carbon dioxide from an external source for dry reforming, the capital cost of the microwave reactor, and the cost of electricity on the net present value is analyzed. Technoeconomic comparison with the conventional industrial process that produces methanol via steam reforming of methane indicates that the chemical looping generates a significant positive net present value along with a substantial reduction in carbon dioxide emissions while producing methanol significantly below the U.S. Department of Energy’s goal of $800/ton.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Ion-Exchange Membrane-Centric Durability Testing and Degradation Characterization for Industry-Relevant CO 2 Reduction

Electrochemical CO 2 reduction is a promising conversion process for producing value-added fuels and chemicals from electricity and CO 2 as a sustainable carbon feedstock to domestically produce fuels and chemicals from industrial waste. Having reached industrially viable performance metrics with small-scale CO 2 electrolysis cells, the field must now increasingly focus on extending the device durability of large stacks to achieve equivalent metrics for 35,000+ hours to decrease maintenance and capital costs. Reported device lifetimes have increased in recent years, with the longest stability studies for CO, ethylene, and formic acid production being published in 2024–2025 with operation times of 4500, 1000, and 5200 h, respectively. Unfortunately, significant extension of the device durability is still required. Here, we provide an overview of ion-exchange membranes (IEMs) and provide insight into the variety of degradation mechanisms that must be overcome to enable the community to meet durability targets. In an effort to accelerate the extension of device lifetimes, we propose a general approach for characterizing CO 2 electrolysis cell degradation before and after durability testing to better elucidate the mechanisms and failure modes of IEMs in zero-gap cells. Furthermore, we encourage the adoption of operando characterizations in tandem with accelerated stress and durability tests, postulating that their combined applications will be increasingly valuable. We hope that this perspective motivates future durability studies to evaluate degradation across the entire electrolysis cell.

09 BIOMASS FUELS↗

DOE OSTI2025

Modular Integrated System for Carbon-Neutral Methanol Synthesis Using Direct Air Capture and Carbon-Free Hydrogen Production

This study investigates the development and economic analysis of a modular integrated system for carbon-neutral methanol synthesis, leveraging direct air capture (DAC) and solid oxide electrolysis cells (SOEC) for carbon dioxide and hydrogen production, respectively. The proposed system integrates a novel building-based DAC process, functionalized solid sorbents, and low-energy SOEC technology, aiming to minimize operational and capital costs. A comparison between the base case system (1,000 t methanol/year) and a scaled-up model (14,758 t methanol/year) reveals significant improvements in efficiency and economic feasibility. The scaled-up system achieves a levelized cost of methanol (LCOM) of $740/t, a 7.5% reduction compared to that of conventional DAC-based systems, while utilizing existing building HVAC infrastructure for air handling. Detailed sensitivity analyses were conducted, evaluating the effects of plant capacity and air flow rate on the LCOM, demonstrating the scalability of the building-based DAC system. The cradle-to-gate life cycle analysis shows that the proposed process using renewable-sourced electricity achieves a 38% reduction in greenhouse gas (GHG) emission compared to reported values of green methanol production technologies that use a conventional DAC and a conventional methanol synthesis catalyst. When fossil-sourced electricity is used in the proposed process, it leads to about a 37.5% reduction in GHG emission in comparison to reported values for conventional methanol production technologies using steam methane reforming technology and fossil-sourced electricity.

alcohols↗

DOE OSTI2025

Technoeconomic Analysis of a Microwave-Assisted Novel Process That Converts Polypropylene Plastic Waste to Propylene

Propylene is an important petrochemical that is used in various industries, including the automobile and polymer sectors. Conventionally, propylene has been produced through fluid catalytic cracking, steam cracking, and propane dehydrogenation. In this project, a novel process to produce propylene from polypropylene plastic waste using a microwave reactor is introduced. Propylene production is simulated in Aspen Plus for both the conventional propane dehydrogenation process and the novel design, with heat integration applied to minimize utility demands and the conventional process serving as the base case for comparison. Finally, a tailored technoeconomic analysis is carried out for both simulated cases to estimate important economic indicators. Analysis of the results shows that the novel microwave-assisted process outperforms the conventional route for propylene production, achieving a single-pass conversion of almost 100%, compared with only 33.8% in the conventional plant. The Net Present Value of the novel plant is $\$1720.3$ MM, which is 3.5 times higher than the conventional process, while the Levelized Cost of Propylene is reduced by 40%. Capital and operating expenditure are also improved in the proposed scheme, with reductions of approximately $\$29$ MM and $\$222$ MM/yr, respectively. In addition to cost savings, this novel process also provides a convenient means to recycle waste polypropylene.

42 ENGINEERING↗

DOE OSTI2025

Amine Structure Governs Corrosion Rates of Copper Catalysts in Electrochemical Reactive Capture of CO 2

Reactive capture of CO 2 (RCC) offers an integrated approach that combines CO 2 capture with its direct electrochemical conversion, eliminating the need for CO 2 release from the capture agent. By avoiding the pH, pressure, and temperature swings required for the release step, RCC has the potential to reduce both energy consumption and capital costs compared to the conventional sequential process of CO 2 capture, release, concentration, and conversion. Amines, widely used in industrial CO 2 capture, face challenges in RCC systems due to their incompatibility with transition metal catalysts as well as their tendency to promote electrode corrosion and parasitic hydrogen evolution. Identifying suitable combinations of amines and catalysts is therefore critical to enabling integrated CO 2 capture and conversion. Here, this work systematically investigates the performance of four primary and four secondary amines for RCC on polycrystalline Cu catalysts. Among the eight tested amines, only dimethylamine showed no measurable Cu corrosion near the open circuit potential. In contrast, ammonia, methylamine, ethylamine, monoethanolamine, diethylamine, diethanolamine, and piperazine all induced Cu corrosion. Corrosion rates correlate with the pK a and steric hindrance of the amines, highlighting key parameters for catalyst–amine codesign. Grand canonical DFT calculations indicate a correlation between the adsorption strength of protonated amines, their pK a , and the extent of Cu corrosion, suggesting that both the surface binding of protonated amines and the lability of their protons play critical roles in corrosion acceleration near open circuit potentials. These finding suggest that amines with high pK a values and weak binding of their protonated forms to Cu surfaces are preferred, as they offer better corrosion resistance.

Choi, Jounghwan [Univ. of California, Los Angeles,↗

DOE OSTI2025

Joint Theoretical and Experimental Study of the Electronic, Magnetic, and Lattice Phonon Dynamics Properties of Ca x Fe y O z Compounds Applied to CO 2 Capture

Unleashing energy innovation ensures a resilient and reliable energy supply. There is a critical need for the development of new carbon dioxide (CO 2 ) captors that have improved energy efficiency accompanied by lower capital and operational costs to ensure abundant, affordable, and secure energy. Among solid materials, CaO is a good CO 2 sorbent for capture technology due to its wide availability and low cost. However, CaO also suffers from some disadvantages, such as high calcination temperature, decreasing capability due to sintering, attrition, and reaction with SO x and NO x . In this study, we employed an ab initio thermodynamic approach and experimental measurements to improve its CO 2 capture performance during the cycles. To do so, we explored the electronic, magnetic, and lattice dynamic properties of a series of calcium ferrites (Ca x Fe y O z ) and applied them for CO 2 capture. Our results showed that all of them can thermodynamically react with CO 2 to form CaCO 3 and iron oxides. Compared to pure CaO capturing CO 2 , CaFe 3 O 4 , CaFe 2 O 4 , and Ca 2 Fe 2 O 5 could shift the CO 2 regeneration temperature to a lower range. The experimental measurements showed that CaFeO 2 is a good CO 2 captor with or without the presence of an O 2 presence. The calculated thermodynamic properties of Ca x Fe y O z capturing the CO 2 reactions can be used to find their operational temperature ranges for different CO 2 capture technologies.

CO2 capture↗

DOE OSTI2020

Selecting Adsorbents to Separate Diverse Near-Azeotropic Chemicals

Industrial separations of near-azeotropic chemicals, species with very similar boiling points, are energy- and capital-intensive. Adsorption-based processes can energy-efficiently separate near-azeotropic mixtures provided suitable adsorbent materials can be found. Among the full diversity of industry-relevant molecules, millions of these mixtures exist, meaning that discovery of mixture-specific adsorbents by direct experiment is infeasible. We show that vast numbers of adsorbents and adsorbing molecules can be explored in a powerful way by coupling atomistic simulations with machine learning. This concept is demonstrated by describing the adsorption of ~54000 industry-relevant chemicals in an experimentally derived set of thousands of metal–organic framework materials. Here, our results identify thousands of near-azeotropic mixtures that can be efficiently separated using adsorption and open possibilities for creating adsorption processes for complex mixtures with many components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Water-Fed, Photovoltaic-Driven Anion-Exchange Membrane Water Electrolysis for Solar Hydrogen Production

Direct coupled photovoltaic (PV)-electrolysis is a promising approach for low-cost hydrogen production, avoiding the need for separate electricity generation. Without solar concentration, the operating current densities of a PV-electrolyzer are small, and low capital costs are needed to reach hydrogen production cost targets (<$2/kg). Anion-exchange membrane (AEM) electrolyzers could be well-suited for this application due to their ability to use platinum group metal (PGM)-free catalysts and operate without supporting electrolytes, but a water-fed PV-AEM system has not yet been demonstrated. In this work, the performance of two AEM electrolyzer designs under pure-water, low-temperature, and diurnal-cycling conditions was evaluated. A simple PV-electrolyzer system design with direct electric coupling to a commercial 84 cm2 Si mini module and passive heating and water flow to the electrolyzer was used for on-sun testing in October 2025. The best-performing PV-AEM system achieved an average solar-to-hydrogen (STH) efficiency of 6.6% and a production rate of 15 mg/kWh/m2 of solar irradiance over 11 days. Minimal electrolyzer corrosion was observed, with no loss in efficiency over the diurnal cycles. While highlighting areas for improved electrolyzer and system design, this work is a proof of concept for distributed hydrogen production using inexpensive and abundant materials.

08 HYDROGEN↗

DOE OSTI2020

Pyrazine-Fused Porous Graphitic Framework-Based Mixed Matrix Membranes for Enhanced Gas Separations

Membrane-based separations can mitigate the capital- and energy-intensive challenges associated with traditional thermally driven processes. To further push the boundary of gas separations, mixed matrix membranes (MMMs) have been extensively exploited; however, identifying an optimal nanofiller to boost the separation performance of MMMs beyond Robeson permeability-selectivity upper bounds remains an ongoing challenge. In this study, a new class of MMMs based on pyrazine-fused crystalline porous graphitic frameworks (PGFs) is reported. At a loading of 6 wt % PGFs, the MMMs surpass the current H 2 /CH 4 Robeson upper bound, ideally suited for applications such as H 2 regeneration. In addition, the fabricated MMMs exhibit appealing CO 2 separation performance, closely approaching the current Robeson upper bounds for CO 2 separation. Compared with the pristine polymeric membranes, the PGF-based MMMs display a record-high enhancement of gas permeability over 120% while maintaining intrinsic gas selectivities. Highlighting the crucial role of the crystallinity of nanofillers, this study demonstrates a facile and effective approach in formulating high-performance MMMs, complementing state-of-the-art membrane formation processes. The design principles open the door to energy-efficient separations of gas mixtures with enhanced productivity compatible with the current membrane manufacturing.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Doubly Interpenetrated Metal-Organic Framework of pcu Topology for Selective Separation of Propylene from Propane

We report that adsorptive separation is an appealing alternative technology to reduce the high energy and capital cost of the distillation separation of propylene/propane; however, it is very challenging to realize. A new flexible metal-organic framework (MOF) material [Zn 2 (BDC-Cl) 2 (Py 2 TTz)] with a doubly interpenetrated pillared paddle wheel structure of pcu (primitive cubic) topology has been realized for this difficult separation for the first time. Through a judicious choice of linkers, the framework has small pore apertures that lead to much more propylene adsorption than propane. The selective adsorption relies on the sieving effect of the flexible framework. The column breakthrough experiment further demonstrated that efficient separation can be achieved under dynamic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Impact of Porous Transport Layer Morphology on the Performance of Proton Exchange Membrane Water Electrolyzers with Ultra-Low Iridium Loadings

Reducing Ir loadings in proton exchange membrane water electrolyzer anodes is critical for lowering capital expenses. Loading reduction could be achieved by improving the Ir activity via doping/alloying and/or the development of advanced microstructures. However, the anode porous transport layer (PTL) is a comparatively simple component whose properties also impact Ir utilization. Therefore, well-designed PTLs may also enable reduced Ir loadings. In this work, we survey eight PTLs from various manufacturers to observe their impact on cell performance at low (0.4 mg Ir cm -2 ) and ultralow (0.1 mg Ir cm -2 ) Ir loadings. The PTLs were characterized by their microstructural properties, including porosity, particle size distribution, and pore size distribution. Electrochemical cell performance was correlated to PTL morphology, and it was found that PTLs with lower porosities and smaller particle and pore radii enabled good performance even at ultralow Ir loadings. 1000-h durability testing indicated that using lower porosity PTLs can significantly improve durability behavior. A runaway voltage phenomenon was observed during durability testing of cells with ultralow Ir loadings, which was caused by increases in both anode and cathode overpotentials. Furthermore, we observed that the beginning of test performance of 0.1 mg Ir cm -2 cells correlates to the 1000-h degradation rates of 0.4 mg Ir cm -2 cells, suggesting that for the Ir catalyst used in this work, short-term testing at ultralow loadings can be used as an indicator of long-term degradation at higher loadings.

08 HYDROGEN↗

DOE OSTI2023

Leveraging the Polymer Glass Transition to Access Thermally Switchable Shear Jamming Suspensions

Suspensions of polymeric nano-and microparticles are fascinating stress-responsive material systems that, depending on their composition, can display a diverse range of flow properties under shear, such as drastic thinning, thickening, and even jamming (reversible solidification driven by shear). However, investigations to date have almost exclusively focused on nonresponsive particles, which do not allow in situ tuning of the flow properties. Polymeric materials possess rich phase transitions that can be directly tuned by their chemical structures, which has enabled researchers to engineer versatile adaptive materials that can respond to targeted external stimuli. Reported herein are suspensions of (readily prepared) micrometer-sized polymeric particles with accessible glass transition temperatures (T g ) designed to thermally control their non-Newtonian rheology. The underlying mechanical stiffness and interparticle friction between particles change dramatically near T g . Capitalizing on these properties, it is shown that, in contrast to conventional systems, a dramatic and nonmonotonic change in shear thickening occurs as the suspensions transition through the particles' T g . This straightforward strategy enables the in situ turning on (or off) of the system's ability to shear jam by varying the temperature relative to T g and lays the groundwork for other types of stimuli-responsive jamming systems through polymer chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Evaluating the Case for Reduced Precious Metal Catalysts in Proton Exchange Membrane Electrolyzers

Proton exchange membrane (PEM) water electrolyzers are a key technology in decarbonizing hydrogen production. Though the market for PEM electrolyzer systems is growing, there are concerns that the cost and availability of precious metal catalysts utilized in today’s commercial systems can limit deployment. Herein, we show that while the availability of Ir should not impede deployment in the near term, the inelasticity of the Ir commodity price is cause for immediate concern. Here we emphasize that diversifying catalyst materials, even with other precious metals, can reduce system costs and mitigate supply chain risk. Furthermore, we analyze the trade-offs between catalyst capital cost and catalyst activity for a range of operating conditions (i.e., capacity factor, electricity price). The framework presented herein is a first step toward establishing performance targets (i.e., activity, stability, material cost) for reduced precious metal and non-precious metal catalysts as a function of PEM electrolyzer operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

An Electrochemical Hydrogen-Looping System for Low-Cost CO 2 Capture from Seawater

Carbon dioxide (CO 2 ) capture from seawater is a viable, long-term solution for addressing legacy carbon pollution on the planet. However, significant challenges to widespread applicability exist in terms of efficiency, cost, and scalability. In this work, we have developed an electrochemical hydrogen-looping (EHL) system that capitalizes on the generation of proton and OH – from seawater. A CO 2 capture efficiency as high as 91% is achieved for our EHL flow cell. We have demonstrated that the electrochemical hydrogen-looping flow cell can remove CO 2 from simulated seawater at a record low electric energy consumption of 660 kWh ton –1 CO 2 , which is a significant reduction of 56% compared with the currently used bipolar membrane electrodialysis technology. In conclusion, the electrochemical hydrogen-looping flow cell with its much lower energy consumption provides an economical approach for direct removal of CO 2 from seawater at practical scale.

Electrical energy↗