Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “capacity factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Air Pollutant Emissions and Regulatory Implications of Co-Processing Raw Bio-Oil in U.S. Petroleum Refineries

Pyrolysis oil, often referred as bio-oil or biocrude, has attracted considerable attention because it has higher energy density and carbon content compared to the raw biomass. Using pyrolysis oil derived from low cost and underutilized biomass to produce renewable hydrocarbon fuels provides a viable link between the agriculture/forestry and (petro-) chemical industry. Co-processing bio-oil with vacuum gas oil (VGO) in petroleum refinery is appealing due to the relatively low capital requirement to retrofit refinery and the compatibility of fuel products with existing infrastructure. In order to implement co-processing, a petroleum refinery would need to consider several process modifications and therefore could be subject to varying levels of air permitting requirements based on bio-oil co-processing ratio, co-processing capacity in existing units, the amount of regulated pollutants expected to be emitted, among other factors. This analysis considers co-processing 5% (by weight) of raw bio-oil with VGO in the fluidized catalytic cracking (FCC) unit(s) in a petroleum refinery. We estimate the potential increase in emissions of regulated air pollutants resulting from the modifications required to implement bio-oil co-processing and evaluate the regulatory and permitting implications for three FCC size categories in the U.S. refineries, which could co-processes raw bio-oil to produce partially renewable transportation fuels. We also assess technically feasible emission control options petroleum refineries could adopt to avoid being subject to major source permitting requirements if the estimated increase in regulated air pollutant emission exceeds the applicable threshold for major modifications. Insights from our analysis can help overcome challenges and risks associated with timely obtaining air permits required to implement bio-oil co-processing in existing refineries. Our analysis also provides needed information for decision makers (e.g., local air quality agencies) to understand the potential air quality implications for retrofitting refineries to co-process bio-oil, particularly in areas with high concentration of petroleum refineries.

09 BIOMASS FUELS↗
DOE OSTI2024

Influence of elevated temperature and oxygen on the capture of radioactive iodine by silver functionalized silica aerogel

Reprocessing is considered a competent strategy for spent nuclear fuel management, yet radioiodine ( 129 I) is emitted in reprocessing off-gas as a hazardous byproduct. Silver functionalized silica aerogel (Ag 0 -aerogel), a promising iodine capture material, experiences a reduction in its capacity after prolonged exposure to off-gas components at elevated temperatures, a phenomenon termed as aging. To fully understand this process, we isolated the contribution of each aging factor, exposing Ag 0 -aerogel samples to N 2 and dry air gas streams, respectively, at 150 °C for different time periods. Aged samples were loaded with I 2 to examine the capacity change and comprehensively characterized to investigate the evolution of their properties. Results show that temperature alone did not alter Ag 0 -aerogel's capacity but triggered Ag 0 nanoparticles sintering and generated organic sulfur species. The presence of O 2 reduced the capacity by ~20 %, causing (i) formation of silver sulfide (Ag 2 S) crystals and (ii) oxidation of Ag-thiolate (Ag-S-r) to Ag sulfonate (Ag-SO 3 -r). Given that Ag 2 S readily adsorbs I 2 , the formation of Ag-SO 3 -r is the major inhibitor for iodine adsorption. This hypothesis was supported by density functional theory (DFT) simulations. These findings unraveled key mechanisms of Ag 0 -aerogel aging, which are useful in the development of materials that withstand realistic spent-nuclear-fuel-reprocessing off-gas conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

2020 Standard Scenarios Report: A U.S. Electricity Sector Outlook

This report summarizes the results of 47 forward-looking 'standard scenarios' of the U.S. power sector simulated by the National Renewable Energy Laboratory (NREL) using the Regional Energy Deployment System (ReEDS) and Distributed Generation (dGen) capacity expansion models. The annual Standard Scenarios, which are now in their sixth year, have been designed to capture a range of possible power system futures considering a variety of factors that impact power sector evolution.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Understanding Relationships between Free Volume and Oxygen Absorption in Ionic Liquids

In this report understanding the factors that govern gas absorption in ionic liquids is critical to the development of high-capacity solvents for catalysis, electrochemistry, and gas separations. Here, we report experimental probes of liquid structure that provide insights into how free volume impacts the O 2 absorption properties of ionic liquids. Specifically, we establish that isothermal compressibility - measured rapidly and accurately through small-angle X-ray scattering - reports on the size distribution of transient voids within a representative series of ionic liquids and is correlated with O 2 absorption capacity. Additionally, O 2 absorption capacities are correlated with thermal expansion coefficients, reflecting the beneficial effect of weak intermolecular interactions in ionic liquids on free volume and gas absorption capacity. Molecular dynamics simulations show that the void size distribution - in particular, the probability of forming larger voids within an ionic liquid - has a greater impact on O 2 absorption than the total free volume. These results establish relationships between the ionic liquid structure and gas absorption properties that offer design strategies for ionic liquids with high gas solubilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Thermal kinetic inductance detectors for millimeter-wave detection

Thermal Kinetic-Inductance Detectors (TKIDs) combine the excellent noise performance of traditional bolometers with a radio frequency multiplexing architecture that enables the large detector counts needed for the next generation of millimeter-wave instruments. In this paper, we first discuss the expected noise sources in TKIDs and derive the limits where the phonon noise contribution dominates over the other detector noise terms: generation–recombination, amplifier, and two-level system noise. Second, we characterize aluminum TKIDs in a dark environment. We present measurements of TKID resonators with quality factors of about 10 5 at 80 mK. We also discuss the bolometer thermal conductance, heat capacity, and time constants. These were measured by the use of a resistor on the thermal island to excite the bolometers. These dark aluminum TKIDs demonstrate a noise equivalent power, NEP = 2 × 10 − 17 W / Hz , with a 1 / f knee at 0.1 Hz, which provides background noise limited performance for ground-based telescopes observing at 150 GHz.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Benefits and Challenges of California Offshore Wind Electricity: An Updated Assessment

Offshore wind (OSW) technology has recently been included in California’s plans to achieve 100% carbon-free electricity by 2045. As an emerging technology, many features of OSW are changing more rapidly than established renewable options and are shaped by local circumstances in unique ways that limit transferrable experiences globally. This paper fills a gap in the literature by providing an updated technological assessment of OSW in California to determine its viability and competitiveness in the state’s electricity generation mix to achieve its near-term energy and environmental goals. Through a critical synthesis and extrapolation of technical, social, and economic analyses, we identify several major improvements in its potential. First, we note that while estimates of OSW’s costs per MWh of installed capacity have generally documented and projected a long-term decline, recent technical, microeconomic, and macroeconomic factors have caused significant backsliding of this momentum. Second, we project that the potential dollar value benefits of OSW’s greenhouse gas reduction capabilities have increased by one to two orders of magnitude, primarily due to major upward revisions of the social cost of carbon. Several co-benefits, including enhanced reliability, economic growth, and environmental justice, look to be increasingly promising due to a combination of technological advances and policy initiatives. Despite these advancements, OSW continues to face several engineering and broader challenges. We assess the current status of these challenges, as well as current and future strategies to address them. We conclude that OSW is now overall an even more attractive electricity-generating option than at the beginning of this decade.

Rose, Adam (ORCID:0000000333477684)↗
NASA NTRS1983

Vegetation classification based on Advanced Very High Resolution Radiometer /AVHRR/ satellite imagery

Data from the NOAA-6 spacecraft Advanced Very High Resolution Radiometer (AVHRR) were tested for effectiveness for vegetation classification. Vegetation, climatological, and meteorological data were gathered for three days over 12 locations, and the normalized differences between the AVHRR bands 1 and 2 were determined. A vegetative greenness index was compared with a hydrologic factor and vegetation characteristics as measured by ground truth. A multivariate vegetation gradient model was formulated, incorporating AVHRR and climatological data. The hydrologic factor was calculated in terms of the precipitation, evaporation, maximum and minimum temperatures, and the hydrologic capacity. The observations were taken over Texas, which has a wide range of climates. A high correlation was found in the vegetation-HF index. The AVHRR data are concluded to be an effective tool for analysis of vegetation/climate relationships.

Norwine, J.↗
NASA NTRS1985

Human factors of intelligent computer aided display design

Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

Hunt, R. M.↗
DOE OSTI2022

Use of Novel Diglycolamide Extractants in Liquid-liquid Separations of Light Rare Earths

Creation of a novel extractant that can improve rare earth separations both economically and environmentally will be pivotal for industry progression. Diglycolamide (DGA) extractants provide chemistries that support this goal by serving as an extractant with high affinity for lanthanides and improved separation factors for light rare earths as compared to current extractants like PC88A. Initial organic phase loading capacity and phase dispersion tests performed with various modified DGAs generated results that were unfavorable for industrial processing, but further modification of the DGA alkyl chain substituents have resulted in new structures with promising results. Dispersion time measurements taken in small scale batch contacts of the extractant with a simulated leach liquor containing La, Ce, Nd, and Pr support implementation in both mixer-settlers and centrifugal contactors for larger scale separations. Furthermore, this confirmation allowed for preliminary flowsheet design using extraction equilibria at various organic to aqueous flow ratios (O/A) for extraction, scrubbing, and stripping stages. These values along with expected product/effluent compositions for each section aid in the testing for specific distribution ratios and final flowsheet design. Implementation of the DGA extractant into solvent extraction equipment will provide essential information for the next steps of this project and how this extractant may be optimized for future applications.

42 ENGINEERING↗
NASA NTRS2011

Ultra-Sensitive Transition-Edge Sensors (TESs) for Far-IR/Submm Space-Borne Spectroscopy

We have built surface micromachined thin-film metallized Si(x)N(y) optical absorbers for transition-edge sensors (TESs) suitable for the Background - Limited far-IR/Submm Spectrograph (BLISS). BLISS is a broadband (38 micrometers - 433 micrometers), grating spectrometer consisting of five wavebands each with a modest resolution of R (is) approx. 1000. Because BLISS requires the effective noise equivalent power (NEP) of the TES to be below 10 (exp 19) W/Hz(exp 1/2), our TESs consist of four long (1000 micrometers), narrow (0.4 micrometers ), and thin (0.25 micrometers ) Si(x) N(y) support beams that reduce the thermal conductance G between the substrate and the optical absorber. To reduce the heat capacity of the absorber and make the response time tau fast enough for BLISS, our absorbers are patterned into a mesh geometry with a fill factor of less than 10%. We use a bilayer of Ti/Au to make the effective impedance of the absorber match the impedance of the incoming radiation for each band. Measurements of the response time of the metallized absorbers to heat pulses show that their heat capacity exceeds the predictions of the Debye model. Our results are suggestive that the surface of the low pressure chemical vapor deposition (LPCVD) Si(x)N(y) used in the absorbers' construction is the source of microstates that dominate the heat capacity.

far-IR spectrometer↗
DOE OSTI2020

Pairing Correlations across the Superfluid Phase Transition in the Unitary Fermi Gas

In the two-component Fermi gas with a contact interaction, a pseudogap regime can exist at temperatures between the superfluid critical temperature $T_c$ and a temperature $T^\ast > T_c$. This regime is characterized by pairing correlations without superfluidity. However, in the unitary limit of infinite scattering length, the existence of this regime is still debated. To help address this, we have applied finite-temperature auxiliary-field quantum Monte Carlo (AFMC) methods to study the thermodynamics of the superfluid phase transition and signatures of the pseudogap in the spin-balanced homogeneous unitary Fermi gas. We present results at finite filling factor $\textit{ν}$ ≃ 0.06 for the condensate fraction, an energy-staggering pairing gap, the spin susceptibility, and the heat capacity, and compare them to experimental data when available. In contrast to previous AFMC simulations, our model space consists of the complete first Brillouin zone of the lattice, and our calculations are performed in the canonical ensemble of fixed particle number. The canonical ensemble AFMC framework enables the calculation of a model-independent gap, providing direct information on pairing correlations without the need for numerical analytic continuation. We use finite-size scaling to estimate $T_c$ at the corresponding filling factor. In this work, we find that the energy-staggering pairing gap vanishes above $T_c$, showing no pseudogap effects, and that the spin susceptibility shows a substantially reduced signature of a spin gap compared to previously reported AFMC simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Delineating the kinetic limitations of Mn 2+/3+ redox in LiMn x Fe 1−x PO 4 cathodes for lithium-ion batteries

LiMn x Fe 1−x PO 4 (LMFP) cathodes offer higher energy density than LiFePO 4 due to a higher operating voltage. However, the kinetic limitations of the Mn 2+/3+ redox couple in LMFP restrict its practically achievable capacity and hinder the ability to achieve high energy density. While the shortcomings of Mn 2+/3+ redox are recognized, its behavior and the factors that impact it remain to be fully understood. We present here an in-depth kinetics study of LMFP by utilizing novel techniques, such as chronoamperometry and galvanostatic electrochemical impedance spectroscopy. Compared to moderate-Mn LMFP (40–60% Mn), high-Mn LMFP (80% Mn) experiences reduced capacity, poor rate capability, and heightened impedance during Mn 2+/3+ redox. The oxidation of Mn 2+ to Mn 3+ becomes more resistive during charge due to the formation of Jahn–Teller active Mn 3+ and the increasing charge-transfer insulating behavior of Mn x Fe 1−x PO 4 . However, the impedance associated with Mn 3+ to Mn 2+ reduction remains constant during discharge in the entire region. The protracted Mn2+ oxidation in high-Mn LMFP results in excessive impedance compared to that in moderate-Mn LMFP, even at low C-rates and high cycling temperatures. Despite the promise of high energy density, the extreme kinetic limitations inherent to high-Mn LMFP present a barrier.

25 ENERGY STORAGE↗
DOE OSTI2025

Functionalized Porous Polymer Networks as High-Performance PFAS Adsorbents

Toxic per- and polyfluoroalkyl substances (PFAS) are now found in nearly every water source on the planet. Exposure to these molecules can have negative health consequences, but the low concentration of PFAS relative to other solutes in water makes their removal challenging. Adsorbents offer a promising treatment route, but often exhibit low selectivities and removal capacities, as well as slow kinetics. The performance in these metrics can be improved by chemically optimizing PFAS binding sites and maximizing PFAS-adsorbent interactions. To explore how to achieve this, a porous polymer network solid (PPN-6, also known as PAF-1) was postsynthetically modified with various chemical moieties capable of leveraging unique combinations of electrostatic, hydrogen-bonding, hydrophobic, and fluorophilic interactions with PFAS molecules. Batch adsorption experiments and computational studies revealed that electrostatic and hydrogen-bonding interactions drive short-chain PFAS adsorption, while hydrophobic and fluorophilic interactions improve long-chain PFAS adsorption. In complex water matrices, a combination of electrostatic and fluorophilic interactions led to the greatest total PFAS removal. The best-performing material, functionalized with a fluorinated alkylammonium (PPN-6-FNDMB), selectively adsorbs PFAS with high capacity (up to 4.0 mmol/g) and rapid kinetics (equilibrium reached in <30 s). Furthermore, PPN-6-FNDMB outperforms several commercial adsorbents, achieving near-complete removal of 21 different PFAS from a groundwater sample collected at a US Air Force base. The PFAS could subsequently be desorbed from PPN-6-FNDMB, concentrating them by a factor of over 50 times. The recycled PPN-6-FNDMB could then be reused with minimal losses in long-chain PFAS adsorption capacity over four cycles.

Pezoulas, Ethan R↗
DOE OSTI2020

Modified Isotherm Modeling to Predict Cs Exchange with Crystalline Silicotitanate in Tank Waste Simulants

The U.S. Department of Energy is working to expedite processing of Hanford tank waste supernate at the Hanford Waste Treatment and Immobilization Plant. To support this goal, Washington River Protection Solutions is designing a Tank Side Cesium Removal (TSCR) system for suspended solids and cesium (Cs/ 137 Cs) removal from Hanford tank waste supernate. The ion exchange media selected for Cs removal at TSCR is crystalline silicotitanate (CST) that is manufactured in a nearly spherical form by Honeywell UOP LLC (UOP; Des Plaines, IL) as product IONSIV® R9140-B (Na form). The Zheng Anthony Miller (ZAM) isotherm model (Zheng et al. 1997) is a multicomponent ion exchange model used to predict the exchange of Group I metals onto CST. The ZAM isotherm has historically been used to predict Cs distribution values from Hanford and Savannah River Site (SRS) tank waste simulants. Figure S.1 summarizes model predictions from the ZAM isotherm that indicate poor prediction of Cs distribution values for simple and complex simulants with the engineered form of CST, IONSIV® R9140-B, and IONSIV® R9120-B where the solid line indicates a perfect fit by the model. The dotted lines indicate ±20% error. Batch contact testing with Hanford tank waste complex and simple simulants was used in conjunction with SRS simulants to experimentally determine Cs distribution values using a modification to the original isotherm model. The experimentally determined maximum Cs capacity for IONSIV® R9140-B CST in both the simple and complex matrices was found to be 0.53±0.3 mmoles Cs/g of CST. This value is not drastically different from the maximum Cs capacity of 0.58 mmoles Cs/g TAM-5 reported by Zheng et al. (1997). However, it is important to note that TAM-5 (commercially IONSIV® IE-910) is a powder. Hamm et al. (2002) determined that a dilution factor was needed to account for the Zr(OH)2 binder in the engineered form of CST. Hamm et al. determined that a dilution factor of 0.68 was appropriate to account for binder contribution and correct overprediction of Cs exchange on the engineered form of CST in ZAM calculations. This reduced the total capacity from 0.58 mmol/g with TAM-5 to 0.39 mmol/g for the engineered form of CST (Hamm et al. 2002). Despite substituting the experimentally determined maximum Cs capacity of 0.55 mmoles Cs/g for the literature-reported capacity of 0.39 mmoles Cs/g, it was determined that additional modifications to the model’s equilibrium rate constants were necessary in refining the isotherm model. The modified model overpredicted K+ uptake by the CST when compared to digested CST results described by Campbell et al. (2019). The modified model was further revised to omit three of the five K+ exchange equilibrium reactions described by ZAM to reduce the additional K+ loading seen by the model. Figure S.2 summarizes the revised model isotherm predictions plotted against measured Kd values.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Oversizing and Part-Load Problems

Oversizing, the common engineering practice of specifying devices with capacity exceeding the actual load requirement, is a widespread practice across virtually all building technologies end-use categories, including HVAC, electrical systems, lighting, appliances, and plug loads. This practice, driven by factors like design uncertainty, institutional pressures, and risk aversion, results in wasted capital investment, control difficulties, and excessive energy consumption due to inefficient part-load operation. Part-load operation, where devices run below maximum capacity, is the dominant operating mode in most energy systems and presents a complex design challenge. Solutions to match output to load fall into three broad categories: constraining the output, adjusting the device’s internal behavior, and linking output to energy storage or other waste-heat reuse applications. The energy implications of part-load are critical, as efficiency often drops sharply as load decreases across a wide diversity of devices. To quantify the extent of this problem, we derive a dimensionless Part-Load Metric (PLM) based on device efficiency and its frequency distribution of operating hours at various output levels. The PLM quantifies the deviation of a device's actual efficiency from its maximum design efficiency. This metric also serves as a measure of "capital inefficiency," enabling engineers to compare the impact of different part-load solutions and providing a unified framework for evaluating performance across various devices and systems.

Meier, Alan↗
DOE OSTI2020

Revisiting the Role of Conductivity and Polarity of Host Materials for Long-Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium-sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long-life LSBs are not fully understood. In this work we have conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long-term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm -2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long-life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long-life and highly efficient LSBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Macroscopic Traffic Modeling Using Probe Vehicle Data: A Machine Learning Approach

Abstract The macroscopic fundamental diagram (MFD) captures an orderly relationship among traffic flow, density, and speed at the network level. It is a simple yet powerful tool for modeling traffic dynamics in large urban networks with broad application in traffic control and management. However, empirically derived MFDs in urban regions require high-resolution traffic data from the network. Having the network flow and vehicular density estimated at the (granular) census tract level using vehicle probe data, we apply machine learning methods to predict the MFDs across U.S. urban areas and capture the impacts of location-specific input features on the network flow–density relationships at a large scale. The results show that, among the four tested machine learning approaches (Random Forest, XGBoost, Support Vector Machine, and Neural Network), XGBoost delivers the best performance in predicting network traffic flow based on vehicular density and location attributes. Using interaction Shapley Additive explanation (SHAP) values and partial correlation analysis, we examine the factors influencing MFD shapes across different locations. Our empirical findings reveal that across U.S. urban areas, network topology, transportation infrastructure, and land use are primary factors shaping MFD curves, while demand and trip-related factors play a lesser role. Specifically, higher ranking roads, centrality, and development levels correlate positively with network capacity and critical density, whereas negative associations are observed for network connectivity, mixed-use development, and road roughness levels.

Jin, Ling↗