Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

BOREAS RSS-17 1994 ERS-1 Level-3 Freeze/Thaw Backscatter Change Images

The Boreal Ecosystem-Atmosphere Study (BOREAS) Remote Sensing Science (RSS)-17 team acquired and analyzed imaging radar data from the European Space Agency's (ESA's) European Remote Sensing Satellite (ERS)-1 over a complete annual cycle at the BOREAS sites in Canada in 1994 to detect shifts in radar backscatter related to varying environmental conditions. Two independent transitions corresponding to soil thaw and possible canopy thaw were revealed by the data. The results demonstrated that radar provides an ability to observe thaw transitions at the beginning of the growing season, which in turn helps constrain the length of the growing season. The data set presented here includes change maps derived from radar backscatter images that were mosaicked together to cover the southern BOREAS sites. The image values used for calculating the changes are given relative to the reference mosaic image. The data are stored in binary image format files. The imaging radar data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

Rignot, Eric↗

Characterization of the Crab Pulsar's Timing Noise

We present a power spectral analysis of the Crab pulsar's timing noise, mainly using radio measurements from Jodrell Bank taken over the period 1982-1989, an interval bounded by sparse data sampling and a large glitch. The power spectral analysis is complicated by nonuniform data sampling and the presence of a steep red power spectrum that can distort power spectra measurement by causing severe power 'leakage'. We develop a simple windowing method for computing red noise power spectra of uniformly sampled data sets and test it on Monte Carlo generated sample realizations of red power-law noise. We generalize time-domain methods of generating power-law red noise with even integer spectral indices to the case of noninteger spectral indices. The Jodrell Bank pulse phase residuals are dense and smooth enough that an interpolation onto a uniform time series is possible. A windowed power spectrum is computed revealing a periodic or nearly periodic component with a period of 568 +/- 10 days and a l/f(exp 3) power-law noise component in pulse phase with a noise strength S(sub infinity)=(1.24 +/- 0.067) x 10(exp 16) cycles(exp 2)/sec(exp 2) over the analysis frequency range f=0.003- 0.1 cycles/day. This result deviates from past analyses which characterized the pulse phase timing residuals as either l/f(sub 4) power-law noise or a quasiperiodic process. The analysis was checked using the Deeter polynomial method of power spectrum estimation that was developed for the case of nonuniform sampling, but has lower spectral resolution. The timing noise is consistent with a torque noise spectrum rising with analysis frequency as f implying blue torque noise, a result not predicted by current models of pulsar timing noise. If the periodic or nearly periodic component is due to a binary companion, we find a mass function f(M) = (6.8 +/- 2.4) x 10(exp -16) solar mass and a companion mass, M(sub c) is greater than or equal to 3.2 solar mass assuming a Crab pulsar mass of 1.4 solar mass.

Scott, D. M.↗

High-rate and long-life lithium-ion battery performance of hierarchically hollow-structured NiCo 2 O 4 /CNT nanocomposite

In this paper, 3D-transition binary metal oxides have been considered as promising anode materials for lithium-ion batteries with improved reversible capacity, structural stability and electronic conductivity compared with single metal oxides. Here, carbon nanotube supported NiCo 2 O 4 nanoparticles (NiCo 2 O 4 /CNT) with 3D hierarchical hollow structure are fabricated via a simple one-pot method. The NiCo 2 O 4 nanoparticles with interconnected pores are consists of small nanocrystals. When used as anode material for the lithium-ion battery, NiCo 2 O 4 /CNT exhibits enhanced electrochemical performance than that of Co 3 O 4 /CNT and NiO/CNT. Moreover, ultra-high discharge/charge stability was obtained for 4000 cycles at a current density of 5 A g –1 . The superior battery performance of NiCo 2 O 4 nanoparticles is probably attributed to the special structural features and physical characteristics, including integrity, hollow structure with interconnected pores, which providing sufficient accommodation for the volume change during charge/discharge process. Besides, the consisting of ultra-small crystals enhanced the utility of active material, and intimate interaction with CNTs improved the electron-transfer rate.

36 MATERIALS SCIENCE↗

Effects of Calcite Impurities in Bentonite Buffer Systems on Uranium(VI) Solution Speciation and Sorption Behavior

In many nuclear waste disposal scenarios, bentonite is the proposed buffer material surrounding nuclear waste containers. Its main mineralogical component, Na-montmorillonite clay, is expected to limit radionuclide mobility to slow diffusion processes due to the clay’s low porosity and permeability, and the high sorption affinity of clay surface complexation and cation exchange sites for many radionuclides. Given its mineral structure, montmorillonite provides two types of porosities that can be accessible to radioactive contaminants: macropores between clay particles and interlayer spaces within clay particles, which become dominant at increasing degrees of bentonite compaction. Despite the fact that bentonite naturally contains a variety of mineral impurities (e.g., quartz, feldspars and calcite), most previous studies have only focused on radionuclide interactions with pure Na-montmorillonite phases. Hence, in this study, we will investigate the influence of calcite impurities on uranium(VI) (U(VI)) solution speciation and sorption behavior in bentonite systems. In the presence of water, calcite impurities are expected to lead to milli-molar concentrations of dissolved calcium over a wide range of pH conditions. Consequently, Ca 2+ could – at least partially – replace Na + on clay cation exchange sites, with further implications for exchange reactions of cationic U(VI) species. In addition, ternary U(VI)-Ca-carbonate solution species (CaUO 2 (CO 3 ) 3 2- and Ca 2 UO 2 (CO 3 ) 3 ) will largely replace U(VI)-carbonate species (UO 2 (CO 3 ) 3 4- and UO 2 (CO 3 ) 2 2- ) at alkaline pH. These larger, but lower-charged U(VI) species, may show different sorption and diffusion characteristics, e.g. if their access to negatively-charged clay interlayer spaces is different from binary U(VI)-carbonate complexes. In this presentation, we will first demonstrate the impacts of calcite impurities on U(VI) solution speciation based on PHREEQC simulations. We will then discuss first results from U(VI) sorption studies in these systems. This research is being performed using funding received from the DOE Office of Nuclear Energy's Nuclear Energy University Program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Effect of CO 2 Pressure on Chromia Scale Microstructure at 750°C

To understand and model performance in supercritical CO 2 (sCO 2 ) for high-efficiency, concentrating solar power (CSP) and fossil energy power cycles, reaction rates are compared at 750°C in 0.1 MPa CO 2 and 30 MPa sCO 2 as well as laboratory air as a baseline on structural materials such as Ni-based alloy 625. Due to the thin reaction products formed even after 5000 h, scanning transmission electron microscopy was used to study the Cr-rich surface oxide scale. The scales formed in CO 2 and sCO 2 had a much finer grain size with more voids observed in CO 2 . However, the observations on alloy 625 were complicated by Mo and Nb-rich precipitates in the adjacent substrate and Al internal oxidation. To simplify the system, a binary Ni-22Cr alloy was exposed for 1000 h in similar environments. After exposure in sCO 2 , there was an indication of carbon segregation detected on the Cr 2 O 3 grain boundaries. After exposure in air, metallic Ni precipitates were observed in the scale that were not observed in the scale formed on alloy 625. The scale formed in air on a second Ni-22Cr model alloy with Mn and Si additions did not contain Ni precipitates, suggesting caution when drawing conclusions from model alloys.

36 MATERIALS SCIENCE↗

Identifying rhenium substitute candidate multiprincipal-element alloys from electronic structure and thermodynamic criteria

While rhenium has proven to be an ideal material in fast-cycling high-temperature applications such as rocket nozzles, its prohibitive cost limits its continued use and motivates a search for viable cost-effective substitutes. We show that a simple design principle that trades off average valence electron count and cost considerations proves helpful in identifying a promising pool of candidate substitute alloys: The Mo–Ru–Ta–W quaternary system. We demonstrate how this picture can be combined with a computational thermodynamic model of phase stability, based on high-throughput ab initio calculations, to further narrow down the search and deliver alloys that maintain rhenium’s desirable hcp crystal structure. Here, this thermodynamic model is validated with comparisons to known binary phase diagram sections and corroborated by experimental synthesis and structural characterization demonstrating multiprinciple-element hcp solid-solution samples selected from a promising composition range.

36 MATERIALS SCIENCE↗

Mini-disk accretion onto spinning black hole binaries: quasi-periodicities and outflows

We perform a full 3D general relativistic magnetohydrodynamical (GRMHD) simulation of an equal-mass, spinning, binary black hole approaching merger, surrounded by a circumbinary disk and with mini-disks around each black hole. For this purpose, we evolve the ideal GRMHD equations on top of an approximated spacetime for the binary that is valid in every position of space, including the black hole horizons, during the inspiral regime. We use relaxed initial data for the circumbinary disk from a previous long-term simulation, where the accretion is dominated by an m = 1 overdensity called the lump. We compare our new spinning simulation with a previous non-spinning run, studying how spin influences the mini-disk properties. We analyze the accretion from the inner edge of the lump to the black hole, focusing on the angular momentum budget of the fluid around the mini-disks. We find that mini-disks in the spinning case have more mass over a cycle than the non-spinning case. However, in both cases we find most of the mass received by the black holes is delivered by direct plunging of material from the lump. We also analyze the morphology and variability of the electromagnetic fluxes and we find they share the same periodicities of the accretion rate. In the spinning case, we find that the outflows are stronger than the non-spinning case. Our results will be useful to understand and produce realistic synthetic light curves and spectra, which can be used in future observations.

Astrophysics↗

Deep Chandra Survey of the Small Magellanic Cloud. II. Timing Analysis of X-Ray Pulsars

We report the timing analysis results of X-ray pulsars from a recent deep Chandra survey of the Small Magellanic Cloud (SMC). We analyzed a total exposure of 1.4 Ms from 31 observations over a 1.2 deg{sup 2} region in the SMC under a Chandra X-ray Visionary Program. Using the Lomb–Scargle and epoch-folding techniques, we detected periodic modulations from 20 pulsars and a new candidate pulsar. The survey also covered 11 other pulsars with no clear sign of periodic modulation. The 0.5–8 keV X-ray luminosity ( L {sub X} ) of the pulsars ranges from 10{sup 34} to 10{sup 37} erg s{sup −1} at 60 kpc. All of the Chandra sources with L {sub X} ≳ 4 × 10{sup 35} erg s{sup −1} exhibit X-ray pulsations. The X-ray spectra of the SMC pulsars (and high-mass X-ray binaries) are in general harder than those of the SMC field population. All but SXP 8.02 can be fitted by an absorbed power-law model with a photon index of Γ ≲ 1.5. The X-ray spectrum of the known magnetar SXP 8.02 is better fitted with a two-temperature blackbody model. Newly measured pulsation periods of SXP 51.0, SXP 214, and SXP 701, are significantly different from the previous XMM-Newton and RXTE measurements. This survey provides a rich data set for energy-dependent pulse profile modeling. Six pulsars show an almost eclipse-like dip in the pulse profile. Phase-resolved spectral analysis reveals diverse spectral variations during pulsation cycles: e.g., for an absorbed power-law model, some exhibit an (anti)-correlation between absorption and X-ray flux, while others show more intrinsic spectral variation (i.e., changes in photon indices).

79 ASTRONOMY AND ASTROPHYSICS↗

Multiwaveband Monitoring of the Radio Galaxy 3C 120

This project started new weekly observations of the radio galaxy 3C 120 during Cycle 3 (1998) of the RXTE mission. It is clear that the weekly observations in 1998 did not resolve the variations of the X-ray emission. The most prominent features are three dips in the X-ray flux, separated from each other by about one year. The dips (as well as the the general flux level) is not correlated with the radio emission. However, the times of the dips coincided, within the errors, with the times of zero separation between apparently superluminal features in the radio jets and the cores of the jets. This is potentially a very exciting finding, which would, if confirmed, link the physics of this radio galaxy with that of the binary star system in our Galaxy, 1915+105. The X-ray dip would then be interpreted as the dissociation of the inner accretion disk, with the extra accretion onto the black hole being accompanied by enhanced flow of energy and material down the relativistic jet. This would result in the creation of the observed new superluminal knot.

Marscher, Alan P.↗

Tracking the Structural and Electronic Configurations of a Cobalt Proton Reduction Catalyst in Water

Time resolved X-ray absorption spectroscopy (X-TAS) has been used to study the light induced hydrogen evolution reaction catalyzed by a highly stable cobalt complex, [Ru(bpy)3]2+ photosensitizer and an equimolar mixture of sodium ascorbate/ascorbic acid electron donor in pure water. XANES and EXAFS analysis of a binary mixture of the octahedral Co(III) pre-catalyst and [Ru(bpy)3]2+ after illumination, revealed in-situ formation of a square pyramidal Co(II) intermediate, with electron transfer kinetics of 51 ns. On the other hand, X-TAS experiments of the complete photocatalytic system in the presence of the electron donor showed the formation of a square planar Co(I) intermediate species within a few nanoseconds followed by its decay in the microsecond timescales. The Co(I) structural assignment is supported by calculations based on density functional theory (DFT). At longer reaction times, we observe the formation of the initial Co(III) species concomitant to the decay of Co(I), thus closing the catalytic cycle. The experimental X-ray absorption spectra of the molecular species formed along the catalytic cycle are modeled using a combination of molecular orbital DFT calculations (DFT-MO) and Finite Difference Method (FDM). These findings allowed us to unequivocally assign the full mechanistic pathway followed by the catalyst as well as to determine the rate limiting step of the process, which consists in the protonation of the Co(I). This study provides a complete kinetics scheme for the hydrogen evolution reaction by a cobalt catalyst, revealing unique information for the development of better catalysts for the reductive side of hydrogen fuel cells.

Moonshiram, Dooshaye↗

Oxygen incorporation in homoepitaxial N-polar GaN grown by radio frequency-plasma assisted molecular beam epitaxy: Mitigation and modeling

We have investigated the effect of gallium deposition and desorption cycles and ultrathin (15 A) AlN layers on the oxygen impurity concentrations in homoepitaxial N-polar GaN layers. Secondary ion mass spectroscopy (SIMS) indicates that three Ga deposition and desorption cycles reduce the total oxygen by 70%-80%, while ten cycles reduces the total oxygen by more than 90%. We present a model of surface segregation and incorporation which accurately captures the distribution of oxygen in these layers. By fitting the model to the SIMS data, we are able to determine the fraction of an oxygen layer adsorbed on a GaN surface which segregates upon initiation of epitaxial GaN growth. Under the conditions investigated, we find this fraction to be 80%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disc tearing leads to low and high frequency quasi-periodic oscillations in a GRMHD simulation of a thin accretion disc

Black hole X-ray binaries (BHXRBs) display a wide range of variability phenomena, from long duration spectral state changes to short-term broad-band variability and quasi-periodic oscillations (QPOs). A particularly puzzling aspect is the production of QPOs, which – if properly understood – could be used as a powerful diagnostic tool of black hole accretion and evolution. In this work, we analyse a high-resolution 3D general relativistic magnetohydrodynamic simulation of a geometrically thin accretion disc, which is tilted by 65° with respect to the black hole spin axis. We find that the Lense–Thirring torque from the rapidly spinning 10 M ⊙ black hole causes several sub-discs to tear off within ~10–20 gravitational radii. Tearing occurs in cycles on time-scales of seconds. During each tearing cycle, the inner sub-disc precesses for 1–5 periods before it falls into the black hole. We find a precession frequency of ~3 Hz, consistent with observed low-frequency QPOs. In addition, we find a high frequency QPO (HFQPO) with centroid frequency of ~55 Hz in the power spectra of the mass-weighted radius of the inner disc and the radial mass flux. This signal is caused by radial epicyclic oscillations of a dense ring of gas at the tearing radius, which suggests a corresponding modulation of the X-ray light curve and may thus explain some of the observed HFQPOs.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced charge separation ability and visible light photocatalytic performance of graphitic carbon nitride by binary S, B co-doping

Highlights: • S, B hertroatoms were successfully doped into g-C{sub 3}N{sub 4} by thermal treatment. • S, B heteroatoms effectively change the intrinsic electronic structure of g-C{sub 3}N{sub 4}. • The SBCN shows much higher photocatalytic activity than CN, SCN and BCN. • The SBCN has high photocatalytic stability and reusability. - Abstract: As a metal-free visible light photocatalyst, the photocatalytic performance of graphitic carbon nitride (g-C{sub 3}N{sub 4}) is limited. To improve the activity of g-C{sub 3}N{sub 4}, we herein report a binary S, B co-doped g-C{sub 3}N{sub 4} (SBCN) by thermally treating the precursor mixture of thiourea, melamine and boron oxide. Characterization results show the obtained SBCN has ultrathin sheet-like morphology and these doped heteroatoms are uniform distributed in the sample. Compared to the pristine g-C{sub 3}N{sub 4}, the SBCN has a small band gap with additional absorption in visible light region, decreased photoluminescence emission and electric resistance and enhanced photocurrent response. These advantages endue SBCN with excellent photocatalytic activity for degradation of organic dyes, and its reaction rate is 6.5 times higher than that of the g-C{sub 3}N{sub 4}. Moreover, the successive cycles demonstrate that this SBCN possesses a superior stability and reusability. Finally, we propose a possible photocatalytic mechanism based on the band structure and mainly active species.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering the switching dynamics of TiO{sub x}-based RRAM with Al doping

Titanium oxide (TiO{sub x}) has attracted a lot of attention as an active material for resistive random access memory (RRAM), due to its versatility and variety of possible crystal phases. Although existing RRAM materials have demonstrated impressive characteristics, like ultra-fast switching and high cycling endurance, this technology still encounters challenges like low yields, large variability of switching characteristics, and ultimately device failure. Electroforming has been often considered responsible for introducing irreversible damage to devices, with high switching voltages contributing to device degradation. In this paper, we have employed Al doping for tuning the resistive switching characteristics of titanium oxide RRAM. The resistive switching threshold voltages of undoped and Al-doped TiO{sub x} thin films were first assessed by conductive atomic force microscopy. The thin films were then transferred in RRAM devices and tested with voltage pulse sweeping, demonstrating that the Al-doped devices could on average form at lower potentials compared to the undoped ones and could support both analog and binary switching at potentials as low as 0.9 V. This work demonstrates a potential pathway for implementing low-power RRAM systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EVIDENCE OF A BROWN DWARF IN THE ECLIPSING DWARF NOVA Z CHAMAELEONIS

We presented three new CCD observations of light minima of Z Chamaeleonis. All 187 available times of light minimum including 37 photographic data are compiled, and a new orbital period analysis is made by means of the standard O - C technique. The O - C diagram of Z Chamaeleonis presents a cyclical periodic change of {approx} 32.57 yr with a high significance level. We attempted to apply two plausible mechanisms (i.e., Applegate's mechanism and light travel-time effect) to explain the cyclical variations of orbital period shown in the O-C diagram. Although the previous works suggested that solar-type magnetic cycles in the red dwarf are the best explanation, the analysis of Applegate's mechanism in this paper presents a negative result. Accordingly, a light travel-time effect is proposed, and a brown dwarf as a tertiary component orbiting around dwarf nova Z Chamaeleonis is derived with a significance level of {approx}>81.6%, which may be a plausible explanation of the periodic variation in the systemic velocity of Z Chamaeleonis in superoutburst.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Capability for Preparation and Purification of Molten Salts to Support Advanced Reactor Concepts, Nuclear Hybrid Energy Systems and Dynamic Grid Energy Storage Concepts

High-temperature multi-fluid, multi-loop test facility to support thermal hydraulic, materials, and thermal energy storage research for nuclear and nuclear-hybrid applications is being developed at Idaho National Laboratory (INL). In its initial configuration, the facility will include a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX). Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST) facility. The main objectives to be addressed with this facility include the characterization and performance evaluation of candidate compact heat exchangers at prototypical operating conditions, flow, and heat transfer issues related to core thermal hydraulics in advanced helium-cooled and salt-cooled reactors, and evaluation of corrosion behavior of new cladding materials and accident-tolerant fuels for light water reactors at prototypical conditions. Fluoride salt coolants are eutectic binary or tertiary mixtures of fluoride salts with melting points in the range of 320 to 500 deg. C. Fluoride high temperature reactors have reactor outlet temperatures of 600 deg. C or higher for high-efficiency power generation or process heat applications. To address research needs related to salt coolants experimental capability has been added to study thermodynamic properties such as melting point temperature, heat capacity, and thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermochemical Modeling of the Uranium-Cerium-Oxygen System

The objective of the Fuel Cycle R&D Program, Advanced Fuels campaign is to provide the research and development necessary to develop low loss, high quality nuclear fuels for ultra-high burnup reactor operation. Primary work in this area will be focused on the ceramic and metallic fuel systems. The goal of the current work is to enhance the understanding of ceramic nuclear fuel thermochemistry to support fuel research and development efforts. The thermochemical behavior of oxide nuclear fuel under irradiation is dependent on the oxygen to metal ratio (O:M). In fluorite-structured fuel, the actinide metal cation is bonded with {approx}2 oxygen atoms on a crystal lattice and as the metal atoms fission, fission fragments and free oxygen are created. The resulting fission fragments will contain some oxide forming elements, however these are insufficient to bind to all the liberated oxygen and therefore, there is an average increase in O:M with fuel burnup. Some of the fission products also form species that will migrate to and react with the cladding surface in a phenomenon known as Fuel Clad Chemical Interaction (FCCI). Cladding corrosion is life-limiting so it is desirable to understand influencing factors, such as oxide thermochemistry, which can be used to guide the design and fabrication of higher burn up fuel. A phased oxide fuel thermochemical model development effort is underway within the Advanced Fuels Campaign. First models of binary oxide systems are developed. For nuclear fuel system this means U-O and transuranic systems such as Pu-O, Np-O and Am-O. Next, the binary systems will be combined to form pseudobinary systems such as U-Pu-O, etc. The model development effort requires the use of data to allow optimization based on known thermochemical parameters as a function of composition and temperature. Available data is mined from the literature and supplemented by experimental work as needed. Due to the difficulty of performing fuel fabrication development with actinide materials, fundamental studies with uranium are performed using surrogate materials as stand-ins for transuranic elements. In most cases, cerium can be used as a suitable substitute for plutonium when performing O:M and sintering kinetics studies because of identical valence states. Differences exist between the magnitude of reported thermodynamic data of (U,Pu)O{sub x} and (U,Ce)O{sub x}, however the change in oxygen potential versus O:M follows the same trend for both systems. Cerium is also a major fission product element, and thus understanding its behavior in fuel is an important issue as well.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evolution of the symbiotic binary system AG Dranconis

We present an analysis of new and archival photometric and spectroscopic observations of the symbiotic star AG Draconis. This binary has undergone several 1 - 3 mag optical and ultraviolet eruptions during the past 15 years. Our combination of optical and ultraviolet spectroscopic data allow a more complete analysis of this system than in previous papers. AG Dra is composed of a K-type bright giant M(sub g) approximately 1.5 solar mass) and a hot, compact star M(sub h approximatelly 0.4 - 0.6 solar mass) embedded in a dense, low metallicity nebula. The hot component undergoes occasional thermonuclear runaways that produce 2 - 3 mag optical/ultraviolet eruptions. During these eruptions, the hot component develops a low velocity wind that quenches x-ray emission from the underlying hot white dwarf. The photoionized nebula changes its volume by a factor of 5 throughout an eruptin cycle. The K bright giant occults low ionization emission lines during superior conjunctions at all outburst phases but does not occult high ionization lines in outburst (and perhaps quiescence). This geometry and the component masses suggest a system inclination of i approximately 30 deg - 45 deg.

Mikolajewska, Joanna↗