Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “acoustical waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observations and seismoacoustic simulations of earthquake-generated infrasound waves in non-epicentral regions

We analysed infrasound waves associated with the Gyeongju earthquake (ML 5.8) that occurred on 2016 September 12, in the southeastern Korean Peninsula. For infrasound wave detection, the Progressive Multichannel Correlation method was applied to the infrasound data set recorded at seven arrays operating in South Korea at epicentral distances ranging from 178 to 472 km. Based on the back-projection method constrained by array-dependent celerity and azimuth deviation models, the source regions were identified in both the epicentral and non-epicentral regions. Remarkably, the non-epicentral secondary sources of this earthquake were located in regions with shallow water depths: (i) the western coastal area in the Yellow Sea and (ii) the shallow ocean basin and bank in the East Sea. The location results obtained from the earthquake could be corroborated through its foreshock (ML 5.1), yielding location results consistent with those of the main shock. The generation of infrasound waves over shallow water depths was fortuitously validated by direct recordings of dominant single-frequency (~0.3 Hz) infrasound waves at close range via temporary sensors near the ocean basin and bank. We interpreted that low-frequency infrasound signals could be generated from interactions among the ocean floor, shallow seawater and atmosphere. We performed numerical simulations of seismoacoustic fields to predict ground motions on the seafloor and acoustic transmission efficiency between the water and air interface. The simulations quantified the energy transfer through different media and clarified our observational results. We found that because this solid Earth‒water‒atmosphere coupled air wave has a relatively low frequency (~0.3 Hz), it can survive propagation over long distances compared with high-frequency infrasound waves generated in inland and mountain regions. In this study, we extend our understanding of water‒atmosphere coupling and the monitoring framework for earthquake-associated non-epicentral infrasound waves, encompassing not only inland ground shaking but also shallow sea regions located far from the epicentre.

Earthquake monitoring and test-ban treaty verifica↗
DOE OSTI2021

Nonlinear dynamics of combustor azimuthal modes: Experiments and modeling

This paper provides an experimental and theoretical investigation of azimuthal instabilities in a lean, premixed combustor. It presents data from a high Reynolds number, industrial-scale facility with multiple fuel stages that enable variation of radial and azimuthal symmetries. The combustor exhibits a variety of behaviors – including standing, spinning, mixed waves, and intermittent behaviors, as well as periodic limit cycles and quasi-periodic oscillations – depending upon varying power and azimuthal symmetry. A second key objective of this paper is to present a weakly nonlinear framework that is used to understand and interpret these results, showing the influence of eigenmode degeneracy, background noise, and azimuthal non-uniformities in mean quantities such as temperature and flame-acoustic coupling. In particular, this analysis shows the importance of the linear instability growth/damping rate and azimuthal non-uniformities in controlling the relative prominence of standing, spinning, or mixed waves at the limit cycle, as well as the preference in the spinning direction. It also shows the conditions under which single frequency or quasi-periodic oscillations are dominant, and how these are more fundamentally influenced by azimuthal non-uniformities and background noise.

42 ENGINEERING↗
DOE OSTI2021

Inferring UAV Position Relative to Smartphone Sensor Based on Acoustic Characteristics

As commercial and non-commercial unmanned aerial vehicles (UAVs) improve technologically and increase in accessibility, their potential for use in actions antithetical to nuclear non-proliferation efforts increases as well. The ability to identify and locate UAVs using ubiquitous, inexpensive hardware and software would be advantageous as both a deterrent and an initial warning system. Our team looks to utilize smartphones as acoustic sensors to record and characterize UAV movement based on the sound produced while in flight. Multi-rotor UAVs produce identifiable acoustic spectral characteristics with frequencies and harmonics corresponding to motor revolutions per minute and the propeller characteristics. As the source moves closer to the receiver these spectral patterns remain relatively stable (at slow speeds), while the energy observed from the waves increases. The goal of this work is to utilize a small network of smartphone sensors with known, fixed positions to infer the relative position of an in-flight UAV with respect to the position of the smartphones through the variation in acoustic energy.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2020

Shockwave dissipation by interface-dominated porous structures

The advent of additive manufacturing (AM) has enabled topological control of structures at the micrometer scale, transforming the properties of polymers for a variety of applications. Examples include tailored mechanical responses, acoustic properties, and thermal properties. Porous polymer materials are a class of materials used for shock and blast mitigation, yet they frequently possess a lack of structural order and are largely developed and evaluated via trial-and-error. Here, we demonstrate control of shockwave dissipation through interface-dominated structures prepared by AM using 2-photon polymerization. A fractal structure with voids, or free surfaces, arranged less than 100 μm apart, allows for rarefaction interactions on the timescale of the shockwave loading. Simulations and dynamic x-ray phase contrast imaging experiments show that fractal structures with interfaces assembled within a “critical” volume reduce shockwave stress and wave velocity by over an order of magnitude within the first unit cell.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Superconducting properties of MoTe 2 from ab initio anisotropic Migdal-Eliashberg theory

Molybdenum ditelluride (MoTe 2 ) is attracting considerable interest since it is the archetypal type-II Weyl semimetal and a candidate for topological superconductivity. In this work, we investigate the superconducting phase diagram of two MoTe 2 polymorphs using the ab initio anisotropic Migdal-Eliashberg theory, and we show that the superconducting dome originates from the synergistic contribution of the density of states at the Fermi level and the transverse acoustic Te modes in the 1$\textit{T}’$ phase. We find that the electron and hole pockets carry trivial $\textit{s}$-wave order parameters of slightly different magnitude, reminiscent of a two-gap structure as suggested by recent experiments. We suggest that a possible route for enhancing the superconducting critical temperature, and realizing $s_{+ –}$ pairing, in the $T_d$ phase is to exploit its nontrivial band topology via electron doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Local Explosion Detection and Infrasound Localization by Reverse Time Migration Using 3-D Finite-Difference Wave Propagation

Infrasound data are routinely used to detect and locate volcanic and other explosions, using both arrays and single sensor networks. However, at local distances (< km) topography often complicates acoustic propagation, resulting in inaccurate acoustic travel times leading to biased source locations when assuming straight-line propagation. Here we present a new method, termed Reverse Time Migration-Finite-Difference Time Domain (RTM-FDTD), that integrates numerical modeling into the standard RTM back-projection process. Travel time information is computed across the entire potential source grid via FDTD modeling to incorporate the effects of topography. The waveforms are then back-projected and stacked at each grid point, with the stack maximum corresponding to the likely source. We apply our method to three volcanoes with different network configurations, source-receiver distances, and topography. At Yasur Volcano, Vanuatu, RTM-FDTD locates explosions within ~20 m of the source and differentiates between multiple vents. RTM-FDTD produces a more accurate location for the two Yasur subcraters than standard RTM and doubles the number of detected events. At Sakurajima Volcano, Japan, RTM-FDTD locates the source within 50 m of the active vent despite notable topographic blocking. The RTM-FDTD location is similar to that from the Time Reversal Mirror method, but is more computationally efficient. Lastly, at Shishaldin Volcano, Alaska, RTM and RTM-FDTD both produce realistic source locations (<50 m) for ground-coupled airwaves recorded on a four-station seismic network. We show that RTM is an effective method to detect and locate infrasonic sources across a variety of scenarios, and by integrating numerical modeling, RTM-FDTD produces more accurate source locations and increases the detection capability.

58 GEOSCIENCES↗
DOE OSTI2021

Modeling Subsurface Explosions Recorded on a Distributed Fiber Optic Sensor

Fiber optic distributed acoustic sensors (DAS) are becoming a widely used tool for seismic sensing. Here we examine recordings of two subsurface chemical explosions, DAG-1 and DAG-3, each of which was about one metric ton (TNT equivalent), that were recorded from a helical fiber installed in two boreholes 80 m away from the source location. Several clear phases including the initial P wave, a weak S wave, and a surface reflected P wave are observed on the helical DAS data. We estimate a velocity model using arrival times measured from the fiber. The DAS waveform data were compared with colocated accelerometers at specific depths in both frequency and time domains. Furthermore, the spectra of the DAS data matched spectra estimated from the accelerometer records. Comparisons of observed waveform shape between the accelerometer records and the fiber measurements (strain-rate) show reasonable agreement except for the data near the event depth. The DAS data and the accelerometer agreed in relative amplitudes but we had difficulties in matching absolute amplitudes, possibly due to errors in metadata. Synthetic strain-rate waveforms were calculated using a 2D wavenumber algorithm and matched the waveform shape and relative amplitudes. In general, DAS is effective at recording strong ground motions at high spatial density. Comparison of the synthetic seismograms with observed data indicate that the waveforms are not consistent with a pure isotropic explosion source and that the observed S waves originate from very near the source region.

58 GEOSCIENCES↗
DOE OSTI2022

Data for Monitoring Fracture Saturation with Internal Transportable Seismic Sources and Twin Neural Networks

Seismic coda-wave analysis is a well-developed method for detecting subtle physical changes in complex media by measuring arrival times in the late-arriving energy from multiply-scattered or reflected waves. However, a challenge arises when multiply-scattered waves are not sufficiently separated in time from the direct arrivals to provide a clear coda wave train. Additional complications for monitoring changes in fracture systems arise when the signals originate from unsynchronized internal sources, such as natural induced seismicity, from acoustic emission, or from transportable intra-fracture sources (chattering dust), that generate uncontrolled signals that vary in arrival time, amplitude and frequency content. Here, we use a twin neural network (also known as a Siamese neural network) for dimensionality reduction to analyze signals from chattering dust to classify the fluid saturation state of a synthetic fracture system. The twin neural network with shared weights generates a low-dimensional representation of the data input by minimizing contrastive loss, serving as the input to a multiclass classifier that accurately classifies whether multiple fractures in a fracture system are fully saturated or partially saturated, or whether a change in saturation has occurred in different fractures in the system. These results show that information buried in unresolved codas from uncontrolled sources can be extracted using machine learning to monitor the evolution of fracture systems caused by physical and chemical processes even when the scattered and direct wave fields overlap.

58 GEOSCIENCES↗
DOE OSTI2021

Characteristics of thermospheric infrasound predicted using ray tracing and weakly non-linear waveform analyses

Infrasonic signals refracted by thermal gradients in the rarefied upper atmosphere are modeled using a combination of ray tracing and weak shock theory to develop an understanding of thermospheric infrasound signals produced by energetic, transient sources. Canonical arrival structures in the form of u-wave signatures are identified for returns refracted at lower altitudes within the thermosphere, and possible multi-pathing produced by effective sound speed inflections are investigated to elucidate more complex arrival structures, which are found to be spatially localized. Furthermore, variability in the source characteristics is investigated and it is found that whereas some waveform phase information is lost due to finite amplitude effects, arrival characteristics are strongly dependent on the peak overpressure near the source. Variability in the propagation path is considered using archived atmospheric specifications and implies that despite uncertainties related to the dynamic and sparsely sampled nature of the atmosphere, thermospheric signatures might be useful in estimating the yield for explosive sources. Last, thermospheric arrivals from a failed rocket launch, as well as those from several large chemical explosions, are analyzed and it is found that qualitative trends match those predicted, and analyses here provide additional insight into such signatures.

42 ENGINEERING↗
DOE OSTI2025

Piezoelectric bulk acoustic resonators for dark photon detection

The kinetically mixed dark photon is a simple, testable dark matter candidate with strong theoretical motivation. Detecting the feeble electric field dark photon dark matter produces requires extremely sensitive detectors. Bulk acoustic resonators (BARs), with their exceptionally high-quality phonon modes, are highly sensitive detectors, and have previously leveraged this sensitivity to search for gravitational waves in the MHz to GHz frequency range. The BAR phonons are typically read out by detecting the electric field generated by the BAR materials’ piezoelectricity. Here we show that this piezoelectricity also rewards such detectors sensitivity to dark photon dark matter, as the dark electric field can resonantly excite BAR phonons. A single 10 g piezoelectric BAR in a large, cold, environment can be orders of magnitude more sensitive to the kinetic mixing parameter than any current experiment, with only a month-long exposure and thermally limited backgrounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Regional infrasonic observations from surface explosions – influence of atmospheric variations and realistic terrain

SUMMARY A pair of 1-ton, conventional surface explosions were conducted at the Nevada National Security Site in the fall of 2020 producing seismoacoustic signatures observable hundreds of kilometres from the source location. Regional infrasonic observations include tropospheric ducting at large distances to the south, a wide stratospheric waveguide with signals observed more than 700 km to the east, and anomalous arrivals in the stratospheric shadow zone. Notable differences in propagation between the events are identified despite the explosions being conducted just two days apart due to a sharp temporal shift in the tropospheric winds as well as structural changes in the stratospheric winds. Propagation simulations of the two events have been completed using a combination of ray tracing and parabolic equation (PE) methods. Simulations have been conducted to quantify the impact of the temporal variations in the atmosphere as well as the influence of terrain on propagation. Temporal variations in reflection locations are found to produce notable changes in downrange propagation due to spatially varying terrain features. Finite frequency effects modelled by the PE are found to predict ensonification not included in corresponding 2D ray tracing simulations. Notable variations in predicted signal amplitude are found due to focusing by along-path and cross-path terrain gradients; though, the later of these is only modelled using fully 3D ray tracing analysis.

58 GEOSCIENCES↗
DOE OSTI2022

Monitoring Fracture Saturation With Internal Seismic Sources and Twin Neural Networks

Seismic coda-wave analysis is a well-developed method for detecting subtle physical changes in complex media by measuring arrival times in the late-arriving energy from multiply scattered or reflected waves. However, a challenge arises when multiply scattered waves are not sufficiently separated in time from the direct arrivals to provide a clear coda wave train. Additional complications for monitoring changes in fracture systems arise when the signals originate from unsynchronized internal sources, such as natural or induced seismicity, from acoustic emission, or from transportable intra-fracture sources (chattering dust), that generate uncontrolled signals that vary in arrival time, amplitude and frequency content. Here, we use a twin neural network (TNN also known as a Siamese neural network) for dimensionality reduction to analyze signals from chattering dust to classify the fluid saturation state of a synthetic fracture system. The TNN with shared weights generates a low-dimensional representation of the data input by minimizing contrastive loss, serving as the input to a multiclass classifier that accurately classifies whether multiple fractures in a fracture system are fully saturated or partially saturated, or whether a change in saturation has occurred in different fractures in the system. Furthermore, these results show that information buried in unresolved codas from uncontrolled sources can be extracted using machine learning to monitor the evolution of fracture systems caused by physical and chemical processes even when the scattered and direct wave fields overlap.

58 GEOSCIENCES↗
DOE OSTI2022

Early arrival waveform inversion using data uncertainties and matching filters with application to near-surface seismic refraction data

We develop an early arrival waveform inversion (EAWI) technique for high-resolution near-surface velocity estimation by iteratively updating the P-wave velocity model to minimize the difference between the observed and calculated seismic refraction data. Traditional EAWI uses a least-squares penalty function and an acoustic forward-modeling engine. Conventional least-squares error is sensitive to data with low signal-to-noise ratio (S/N) and iterations of EAWI stop at a local-minimum data misfit or at the preassigned maximum number of iterations. These stopping criteria can result in overfitting the data. In addition, fitting the elastic field data with an acoustic modeling engine can introduce artifacts in velocity estimation, especially in land data with significant elastic effects. To overcome these challenges, we develop a robust EAWI (REAWI) method by (1) incorporating the data uncertainties into the penalty function and (2) mitigating the elastic effects using a matching filter workflow. The data uncertainties are estimated from waveform reciprocal errors. When full-waveform reciprocity is not available, trace interpolation is applied. The proposed method prevents closely fitting data with low S/N, avoids overall overfitting by stopping the iterations when a normalized chi-square ([Formula: see text]) waveform misfit of one is achieved, and is less affected by elastic effects. Numerical examples and application to near-surface refraction data at a groundwater contamination site suggest that the final REAWI models are more accurate than the corresponding EAWI models, at the same level of misfit. This is the first known application of a matching filter workflow to real land data. The final REAWI models satisfy an appropriate misfit between the real data and predicted elastic P-wave data, making this approach in this respect equivalent to elastic waveform inversion. We also develop a method to analyze model constraint by examining the energy of the wavefield Fréchet derivative thereby avoiding the influence of the data residuals in traditional Fréchet kernels.

Geochemistry & Geophysics↗
DOE OSTI2024

Proximal Observations of Epicentral Infrasound Generated by Shallow Low-Magnitude Earthquakes in the Permian Basin, West Texas

Infrasound generated by earthquakes and explosions is generally detected at receivers at epicentral distances of hundreds to thousands of kilometers. However, proximal (<50 km) observations are especially important for low-magnitude earthquakes and low-yield explosions that may not generate signals capable of being detected at great ranges. Here, in this study, we present on the signals detected on an infrasound array 3 km away from two M L 2.9 earthquakes in the Permian Basin of west Texas. Local infrasound (LIS), generated at receivers during the passage of seismic waves, was detected following each earthquake. Epicentral infrasound (EIS), created at or near the epicenter and propagating away as a sound wave, was also detected. Array processing methods show that the EIS signals arrive from the same direction as the earthquake epicenters and at acoustic speeds. To our knowledge, these are the first observations of laterally propagating EIS at proximal ranges following an earthquake of any magnitude.

58 GEOSCIENCES↗
DOE OSTI2025

Effect of a Fine-Scale Layered Structure of the Atmosphere on Infrasound Signals from Fragmenting Meteoroids

We investigate the influence of a fine-scale (FS) layered structure in the atmosphere on the propagation of infrasound signals generated by fragmenting meteoroids. Using a pseudo-differential parabolic equation (PPE) approach, we model broadband acoustic signals from point sources at altitudes of 35–100 km. The presence of FS fluctuations in the stratosphere (37–45 km) and the lower thermosphere (100–120 km) modifies ray trajectories, causing multiple arrivals and prolonged signal durations at ground stations. In particular, meteoroids fragmenting at 80–100 km can produce two distinct thermospheric arrivals beyond 150 km range, while meteoroids descending to 50 km or below yield weak, long-lived arrivals within the acoustic shadow zone via antiguiding propagation and diffraction. Comparison with observed infrasound data confirms that FS-layered inhomogeneities can account for multi-arrival “N-waves,” broadening potential interpretations of meteoroid signals. The results also apply to other atmospheric-entry objects, such as sample return capsules, emphasizing how FS structure impacts shock wave propagation. In conclusion, our findings advance understanding of wavefield evolution in a layered atmosphere and have broad relevance for global infrasound monitoring of diverse phenomena (e.g., re-entry capsules, rocket launches, and large-scale explosions).

Aeroacoustics↗
DOE OSTI2025

Acoustic misalignment mechanism for axion dark matter

A rotation in the field space of a complex scalar field corresponds to a Bose-Einstein condensation of U(1) charges. We point out that fluctuations in this rotating condensate exhibit sound-wave modes, which can be excited by cosmic perturbations and identified with axion fluctuations once the U(1) charge condensate has been sufficiently diluted by cosmic expansion. We consider the possibility that these axion fluctuations constitute dark matter and develop a formalism to compute its abundance. We carefully account for the growth of fluctuations during the epoch where the complex scalar field rotates on the body of the potential and possible nonlinear evolution when the fluctuations become non-relativistic. We find that the resultant dark matter abundance can exceed the conventional and kinetic misalignment contributions if the radial direction of the complex scalar field is sufficiently heavy. The axion dark matter may also be warm enough to leave imprints on structure formation. We discuss the implications of this novel dark matter production mechanism — acoustic misalignment mechanism — for the axion rotation cosmology, including kination domination and baryogenesis from axion rotation, as well as for axion searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The Strange Case of Ground-Coupled Airwaves on Seismoacoustic Stations at Local to Near-Regional Scales

Here we investigate the application of ground-coupled airwaves observed by seismoacoustic stations at local to near-regional scales to detect signals of interest and determine back-azimuth information. Ground-coupled airwaves are created from incident pressure waves traveling through the atmosphere that couple to the earth and transmit as a seismic wave with retrograde elliptical motion. Previous studies at sub-local scales (<10 km from a source of interest) found the back-azimuth to the source could be accurately determined from seismoacoustic signals recorded by acoustic and 3-component seismic sensors spatially separated on the order of 10 to 150 m. The potential back-azimuth directions are estimated from the coherent signals between the acoustic and vertical seismic data, via a propagation-induced phase shift of the seismoacoustic signal. A unique solution is then informed by the particle motion of the 3-component seismic station, which was previously found to be less accurate than the seismoacoustic-sensor method. We investigate the applicability of this technique to greater source-receiver distances, from 50-100 km and up to 400 km, which contains pressure waves with tropospheric and stratospheric ray paths, respectively. Specifically, we analyze seismoacoustic sources with ground truth from rocket motor fuel elimination events at the Utah Test and Training Range (UTTR) as well as a 2020 rocket launch in Southern California. From these sources we observe evidence that while coherent signals can be seen from both sources on multiple seismoacoustic station pairs, the determined ground-coupled airwave back-azimuths are more complicated than results at more local scales. Our findings suggest more complex factors including incidence angle, coupling location, subsurface material, and atmospheric propagation effects need to be fully investigated before the ground-coupled airwave back-azimuth determination method can be applied or assessed at these further distances.

58 GEOSCIENCES↗