Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Warp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Experimental Observations of Damage States in Unnotched and Notched 3D Orthogonal Woven Coupons Loaded in Tension

This paper describes a series of unnotched and notched tensile tests on two 3D orthogonal woven architectures loaded in the warp direction. Dogbone specimens were used for the unnotched tests, and open-hole specimens were used for the notched tests. For each architecture and test type, two specimens were loaded under monotonic displacement control to failure, and two specimens were incrementally loaded to failure in five steps. X-ray computed tomography (CT) was used to characterize the woven architecture and defects on each specimen prior to testing. Digital image correlation (DIC) images were obtained from both sides of the specimen throughout the loading and unloading. For the incremental tests, X-ray CT was used to document the damage progression after each load increment. The results for both architectures and test specimens followed a similar pattern where matrix cracks formed perpendicular to the load direction and were primarily located between the stacks of warp tows. Two-piece failure path always occurred perpendicular to the loading direction, along the through-thickness segments of the Z-tows. The combination of stress concentrations due to the specimen geometry, weave geometry, and cut tows created stress concentrations that appear to initiate failure.

Woven materials↗

Simulation of e-cloud driven instability and its attenuation using a simulated feedback system in the CERN SPS

Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS, and a feedback system to control the single-bunch instabilities is under active development. We present the latest improvements to the WARP-POSINST simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS. Simulations using an idealized feedback system exhibit adequate mitigation of the instability providing that the cutoff of the feedback bandwidth is at or above 450 MHz. Artifacts from numerical noise of the injected distribution of electrons in the modeling of portions of bunch trains are discussed, and benchmarking of WARP against POSINST and HEADTAIL are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WarpVisit

WarpVisit is an insitu simulation application that integrates the Warp laser plasma accelerator simulation framework with Visit a parallel visualization application. WarpVisit is written in python and supports interactive or live mode where user can connect to Warp with the Visit GUI and batch mode for batch for non-interactive use on high-performance computing resources.

Loring, Burlen↗

Particle In Cell Scalable Application Resource (PICSAR) v2

PICSAR, for Particle-In-Cell Scalable Application Resource, is a high-performance Particle-in-Cell library developed in Fortran 90 and Python. This library was first developed to be coupled with WARP and provide efficient subroutines optimized for Many-Integrated Core (MIC) architectures such as the forthcoming system Cori Phase II that will be equipped with Intel Xeon Phi KNL processors. It is a compact self-contained proxy that adequately portrays the computational loads and dataflow of the more complex WARP code but can also be used by other PIC codes. PICSAR also contains a Fortran stand-alone Particle-In-Cell "mini-app" that includes the key functionalities of a PIC code. This stand-alone code is used for testing implementation performances and to do some benchmarks.

VINCENTI, HENRI↗

EMPulse, a new 3-D simulation code for EMP formation and propagation

EMPulse is a comprehensive and modern 3-D simulation code for electro-magnetic pulse (EMP) formation and propagation studies, being developed at LLNL under a Laboratory Directed R&D (LDRD) initiative that was launched in the fall of 2014. Furthermore, EMPulse builds upon the open-source Warp particle-in-cell code framework which was developed by members of this team and collaborators at other institutions. Our goal of this endeavor is a new tool, using methods different from those in common use, and enabling the detailed and self-consistent study of multidimensional effects in geometries that have typically been treated only approximately. We describe the underlying Warp framework and its capabilities; the models that have been or are being newly developed and incorporated into EMPulse, tests of these models, and number of approaches to increased computational efficiency that we are studying.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Graphics processor unit with opportunistic inter-path reconvergence

A graphics processing unit and methods for comping and executing instructions with opportunistic inter-path reconvergence are provided. A graphics processing unit may access computer executable instructions mapped to code blocks of a control flow for a warp. The code blocks may include an immediate dominator block and an intermediate post dominator block. The graphics processing unit may store a first thread mask associated with the first code block. The first thread mask may include a plurality of bits indicative of the active or non-active status for the threads of the warp, respectively. The graphics processing unit may a second thread mask corresponding to an intermediate code block between the immediate dominator block and intermediate post dominator block. The graphics processing unit may execute, with threads indicated as active by the first thread mask, instructions of the intermediate code block with a first operand or a second operand depending on the second thread mask.

Kulkarni, Milind↗

Development of Critical Experiments to Benchmark Moderator Temperature Reactivity Worth

The simulation of nuclear reactors requires being able to accurately model several different interrelated physical processes including neutronics, heat production, fluid/thermal physics, structural mechanics, fuel behavior, chemistry, and balance-of-plant. In order to design and use new types of nuclear reactors, modern codes have been developed which couple together the behavior of these different physical models to accurately consider the feedback effects between different physical effects. The SHARP toolset, part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project, is an example of an effort to combine models of neutronics, thermal-hydraulics, and structural mechanics in a coupled simulation to model any type of nuclear reactor as accurately as possible. The validation of multi-physics coupling techniques requires new experimental benchmark experiments specifically designed for that purpose. As a preliminary step towards design of these experiments, a series of measurements have been performed to demonstrate the temperature-dependent neutronic behavior of a well-characterized reactor assembly for comparison with the available codes. The facility adopted for these experiments is Walthousen Reactor Critical Facility (RCF) at Rensselaer Polytechnic Institute (RPI). The RCF is unique in several aspects and provides several advantages to this type of experiment. Built in 1954 by the American Locomotive Company (ALCO), the RCF has been used to design small compact reactors. RPI acquired the facility in 1963, and the highly-enriched uranium fuel was later swapped for low-enriched fuel pins that were excess from the SPERT facility experiments. Nowadays, The RCF is regarded as a teaching and research facility, permitting the training of licensed Senior Reactor Operators, and offering a critical experiments laboratory course to students. The reactor core standard configuration consists of 332 or 333 UO{sub 2} fuel pins, containing a total of 35.2 grams of U- 235 each (4.81 % enriched). The pins are arranged in a regular lattice with a pitch of 1.6256 cm. The number and configuration of these pins are flexible, and the reactor's overall thermal power is limited to no more than 15 W. As the low thermal output of the reactor does not induce any measurable temperature changes, the effect of temperature in the reactor is observed by applying two 18- kW electric heaters to the water moderator, with mechanical agitators to maintain uniformity in moderator temperature. Before beginning experiments, each fuel pin inside the core was surveyed for mechanical defects (bending or warping) that may contribute to uncertainty in core behavior. Every fuel pin has been individually removed from the core and checked for any irregularities on its surface (caused by shocks or usage). About 12 % of the 333 pins were found to have a small degree of warping and were replaced with excess pins available in the facility. In doing this, we made sure all the pins are identical, thereby increasing the accuracy of future models. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Performance study of atomic tally methods for GPU-accelerated Monte Carlo dose calculation - 25352

Over the past several years, the graphics processing unit (GPU) technology has rapidly gained ground in scientific computing due to its outstanding performance and programmability. GPU implementation of Monte Carlo radiation transport for dose calculations has been reported by many investigators. The majority of these studies adopted single-precision floating point format because of the higher peak floating point operations per second (FLOPS) the GPUs can deliver than double-precision. It has been known that calculation using single-precision is more prone to numerical round-off errors, especially when a single tally data is accumulated 'atomically' and repeatedly by thousands of GPU threads. To mitigate this problem, the least intrusive solution in theory is to replace the single-precision atomic-add tally function with a double-precision version. However, the complexity lies in the fact that some GPUs (Nvidia GPUs prior to the Pascal generation; all current AMD GPUs) do not readily offer such double-precision function at hardware level, and that software emulation is too slow to use if not optimized properly. This paper discusses several atomic-add tally methods with reduced numerical errors used throughout ARCHER development. The original software-based compare-and-swap method (CAS) was shown to be inefficient due to high intra-warp thread contention, whereas the improved software-based warp-aggregated method (WAG) and Kahan summation method (KAS) eliminated the thread contention and performed very well on Kepler and Maxwell GPUs, being more than 13 times faster than CAS in our tests. The hardware-based (HB) double-precision atomic-add feature available on Pascal and Volta GPUs exceeded software emulation and offered the best performance universally, so did WIB, a combination of WAG and HB methods. It was also shown that in a single-precision dose engine, KAS managed to maintain high reliability when the single-precision atomic-add tally underestimated the dose by 25%. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Holographic Systematics of D-brane Inflation

We provide a systematic treatment of possible corrections to the inflaton potential for D-brane inflation in the warped deformed conifold. We consider the D3-brane potential in the presence of the most general possible corrections to the throat geometry sourced by coupling to the bulk of a compact Calabi-Yau space. This corresponds to the potential on the Coulomb branch of the dual gauge theory, in the presence of arbitrary perturbations of the Lagrangian. The leading contributions arise from perturbations by the most relevant operators that do not destroy the throat geometry. We find a generic contribution from a non-chiral operator of dimension {Delta} = 2 associated with a global symmetry current, resulting in a negative contribution to the inflaton mass-squared. If the Calabi-Yau preserves certain discrete symmetries, this is the dominant correction to the inflaton potential, and fine-tuning of the inflaton mass is possible. In the absence of such discrete symmetries, the dominant contribution comes from a chiral operator with {Delta} = 3/2, corresponding to a {phi}{sup 3/2} term in the inflaton potential. The resulting inflationary models are phenomenologically identical to the inflection point scenarios arising from specific D7-brane embeddings, but occur under far more general circumstances. Our strategy extends immediately to other warped geometries, given sufficient knowledge of the Kaluza-Klein spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Toward a physics design for NDCX II, an ion accelerator for warm dense matter and HIF target physics studies

The Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL), a collaboration of LBNL, LLNL, and PPPL, has achieved 60-fold pulse compression of ion beams on the Neutralized Drift Compression eXperiment (NDCX) at LBNL. In NDCX, a ramped voltage pulse from an induction cell imparts a velocity 'tilt' to the beam; the beam's tail then catches up with its head in a plasma environment that provides neutralization. The HIFS-VNL's mission is to carry out studies of warm dense matter (WDM) physics using ion beams as the energy source; an emerging thrust is basic target physics for heavy ion-driven inertial fusion energy (IFE). These goals require an improved platform, labeled NDCX-II. Development of NDCX-II at modest cost was recently enabled by the availability of induction cells and associated hardware from the decommissioned advanced test accelerator (ATA) facility at LLNL. Our initial physics design concept accelerates an {approx} 30 nC pulse of Li{sup +} ions to {approx} 3 MeV, then compresses it to {approx} 1 ns while focusing it onto a mm-scale spot. It uses the ATA cells themselves (with waveforms shaped by passive circuits) to impart the final velocity tilt; smart pulsers provide small corrections. The ATA accelerated electrons; acceleration of non-relativistic ions involves more complex beam dynamics both transversely and longitudinally. We are using an interactive one-dimensional kinetic simulation model and multidimensional Warp-code simulations to develop the NDCX-II accelerator section. Both LSP and Warp codes are being applied to the beam dynamics in the neutralized drift and final focus regions, and the plasma injection process. The status of this effort is described.

43 PARTICLE ACCELERATORS↗

Simulating An Acceleration Schedule For NDCX-II

The Virtual National Laboratory for Heavy-Ion Fusion Science is developing a physics design for NDCX-II, an experiment to study warm dense matter heated by ions. Present plans call for using 34 induction cells to accelerate 45 nC of Li{sup +} ions to more than 3 MeV, followed by neutralized drift-compression. To heat targets to the desired temperatures, the beam must be compressed to a millimeter-scale radius and a duration of about 1 ns. A novel NDCX-II acceleration schedule has been developed using an interactive one-dimensional particle-in-cell simulation ASP to model the longitudinal physics and axisymmetric WARP simulations to validate the 1-D model and add transverse focusing. Three-dimensional Warp runs have been used recently to study the sensitivity to misalignments in the focusing solenoids.

43 PARTICLE ACCELERATORS↗

SIMULATING AN ACCELERATION SCHEDULE FOR NDCX-II

The Virtual National Laboratory for Heavy-Ion Fusion Science is developing a physics design for NDCX-II, an experiment to study warm dense matter heated by ions. Present plans call for using 34 induction cells to accelerate 45 nC of Li+ ions to more than 3 MeV, followed by neutralized drift-compression. To heat targets to the desired temperatures, the beam must be compressed to a millimeter-scale radius and a duration of about 1 ns. A novel NDCX-II acceleration schedule has been developed using an interactive one-dimensional particle-in-cell simulation ASP to model the longitudinal physics and axisymmetric WARP simulations to validate the 1-D model and add transverse focusing. Three-dimensional Warp runs have been used recently to study the sensitivity to misalignments in the focusing solenoids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FULL ELECTROMAGNETIC FEL SIMULATION VIA THE LORENTZ-BOOSTED FRAME TRANSFORMATION

Numerical electromagnetic simulation of some systems containing charged particles with highly relativistic directed motion can by speeded up by orders of magnitude by choice of the proper Lorentz-boosted frame. A particularly good application for calculation in a boosted frame isthat of short wavelength free-electron lasers (FELs) where a high energy electron beam with small fractional energy spread interacts with a static magnetic undulator. In the optimal boost frame (i.e., the ponderomotive rest frame), the red-shifted FEL radiation and blue-shifted undulator field have identical wavelengths and the number of required longitudinal grid cells and time-steps for fully electromagnetic simulation (relative to the laboratory frame) decrease by factors of gamma^2 each. In theory, boosted frame EM codes permit direct study of FEL problems for which the eikonal approximation for propagation of the radiation field and wiggler-period-averaging for the particle-field interaction may be suspect. We have adapted the WARP code to apply this method to several electromagnetic FEL problems including spontaneous emission, strong exponential gain in a seeded, single pass amplifier configuration, and emission from e-beams in undulators with multiple harmonic components. WARP has a standard relativistic macroparticle mover and a fully 3-D electromagnetic field solver. We discuss our boosted frame results and compare with those obtained using the ?standard? eikonal FEL simulation approach.

43 PARTICLE ACCELERATORS↗

Time Series Classification for Locating Forced Oscillation Sources

Here, this article presents a machine learning based time-series classification method for using synchrophasor measurements to locate the source of forced oscillation (FO) for fast disturbance removal. First, multivariate time series (MTS) matrices are constructed by the most informative measurements selected by sequential feature selection from each power plant. Then, the Mahalanobis matrix is trained such that the Mahalanobis distance between the MTSs from the same class (i.e., with the same FO source location) are minimized and from different classes (i.e., with different FO source locations) are maximized. This allows MTSs to be classified by classifiers with class membership corresponding to the location of each FO source. To meet the runtime requirements of online matching, class templates are constructed to reduce data size and improve matching efficiency. To account for uncertainty in identifying the exact beginning of an FO event, dynamic time warping is used to align the out-of-sync MTSs. IEEE 39bus and WECC 179bus systems are used for algorithm development and validation. Simulation results demonstrate that the algorithm meets online operation runtime requirement with high accuracy using misaligned data sets.

42 ENGINEERING↗

The Local Stellar Velocity Field via Vector Spherical Harmonics

We analyze the local field of stellar tangential velocities for a sample of 42,339 nonbinary Hipparcos stars with accurate parallaxes, using a vector spherical harmonic formalism. We derive simple relations between the parameters of the classical linear model (Ogorodnikov-Milne) of the local systemic field and low-degree terms of the general vector harmonic decomposition. Taking advantage of these relationships, we determine the solar velocity with respect to the local stars of (V(sub X), V(sub Y), V(sub Z)) (10.5, 18.5, 7.3) +/- 0.1 km s(exp -1) not corrected for the asymmetric drift with respect to the local standard of rest. If only stars more distant than 100 pc are considered, the peculiar solar motion is (V(sub X), V(sub Y), V(sub Z)) (9.9, 15.6, 6.9) +/- 0.2 km s(exp -1). The adverse effects of harmonic leakage, which occurs between the reflex solar motion represented by the three electric vector harmonics in the velocity space and higher degree harmonics in the proper-motion space, are eliminated in our analysis by direct subtraction of the reflex solar velocity in its tangential components for each star. The Oort parameters determined by a straightforward least-squares adjustment in vector spherical harmonics are A=14.0 +/- 1.4, B=13.1 +/- 1.2, K=1.1 +/- 1.8, and C=2.9 +/- 1.4 km s(exp -1) kpc(exp -1). The physical meaning and the implications of these parameters are discussed in the framework of a general linear model of the velocity field. We find a few statistically significant higher degree harmonic terms that do not correspond to any parameters in the classical linear model. One of them, a third-degree electric harmonic, is tentatively explained as the response to a negative linear gradient of rotation velocity with distance from the Galactic plane, which we estimate at approximately -20 km s(exp -1) kpc(exp -1). A similar vertical gradient of rotation velocity has been detected for more distant stars representing the thick disk (z greater than 1 kpc), but here we surmise its existence in the thin disk at z less than 200 pc. The most unexpected and unexplained term within the Ogorodnikov-Milne model is the first-degree magnetic harmonic, representing a rigid rotation of the stellar field about the axis -Y pointing opposite to the direction of rotation. This harmonic comes out with a statistically robust coefficient of 6.2 +/- 0.9 km s(exp -1) kpc(exp -1) and is also present in the velocity field of more distant stars. The ensuing upward vertical motion of stars in the general direction of the Galactic center and the downward motion in the anticenter direction are opposite to the vector field expected from the stationary Galactic warp model.

Galaxy↗

Simulation Results of a Feedback Control System to Damp Electron Cloud Single-Bunch Transverse Instabilities In The Cern SPS

Transverse Single-Bunch Instabilities due to the Electron Cloud effect are limiting the operation at high current of the SPS at CERN. Recently a high-bandwidth Feedback System has been proposed as a possible solution to stabilize the beam and is currently under study. We analyze the dynamics of the bunch actively damped with a simple model of the Feedback in the macro-particle code WARP, in order to investigate the limitations of the System such as the minimum amount of power required to maintain stability. We discuss the feedback model, report on simulation results and present our plans for further development of the numerical model.

43 PARTICLE ACCELERATORS↗

Four-dimensional electrical conductivity monitoring of stage-driven river water intrusion: Accounting for water table effects using a transient mesh boundary and conditional inversion constraints

Our paper describes and demonstrates two methods of providing a priori information to the surface-based time-lapse three-dimensional electrical resistivity tomography (ERT) problem for monitoring stage-driven or tide-driven surface water intrusion into aquifers. First, a mesh boundary is implemented that conforms to the known location of the water table through time, thereby enabling the inversion to place a sharp bulk conductivity contrast at that boundary without penalty. Moreover, a nonlinear inequality constraint is used to allow only positive or negative transient changes in EC to occur within the saturated zone, dependent on the relative contrast in fluid electrical conductivity between surface water and groundwater. A 3-D field experiment demonstrates that time-lapse imaging results using traditional smoothness constraints are unable to delineate river water intrusion. The water table and inequality constraints provide the inversion with the additional information necessary to resolve the spatial extent of river water intrusion through time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large Magnetic Gap in a Designer Ferromagnet–Topological Insulator–Ferromagnet Heterostructure

Abstract Combining magnetism and nontrivial band topology gives rise to quantum anomalous Hall (QAH) insulators and exotic quantum phases such as the QAH effect where current flows without dissipation along quantized edge states. Inducing magnetic order in topological insulators via proximity to a magnetic material offers a promising pathway toward achieving the QAH effect at a high temperature for lossless transport applications. One promising architecture involves a sandwich structure comprising two single‐septuple layers (1SL) of MnBi 2 Te 4 (a 2D ferromagnetic insulator) with ultrathin few quintuple layer (QL) Bi 2 Te 3 in the middle, and it is predicted to yield a robust QAH insulator phase with a large bandgap greater than 50 meV. Here, the growth of a 1SL MnBi 2 Te 4 /4QL Bi 2 Te 3 /1SL MnBi 2 Te 4 heterostructure via molecular beam epitaxy is demonstrated and the electronic structure probed using angle‐resolved photoelectron spectroscopy. Strong hexagonally warped massive Dirac fermions and a bandgap of 75 ± 15 meV are observed. The magnetic origin of the gap is confirmed by the observation of the exchange‐Rashba effect, as well as the vanishing bandgap above the Curie temperature, in agreement with density functional theory calculations. These findings provide insights into magnetic proximity effects in topological insulators and reveal a promising platform for realizing the QAH effect at elevated temperatures.

36 MATERIALS SCIENCE↗