Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVEGUIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Low loss waveguide four-port crossover circuit and its application for cross-slot antenna feed

A four-way crossover circuit using a cylindrical cavity with four rectangular input/output ports has been designed to feed a cross-slot antenna to achieve dual polarization. Because all the input and output circuits are waveguides, the network is especially useful for high power systems and millimeter wave applications. The crossover circuit exhibits a very low insertion loss and good isolation.

Chang, K.↗
NASA NTRS1991

High-Tc superconductor coplanar waveguide filter

Coplanar waveguide (CPW) low-pass filters made of YBa2Cu3O(7-delta) (YBCO) on LaAlO3 substrates, with dimensions suited for integrated circuits, were fabricated and packaged. A complete filter gives a true idea of the advantages and difficulties in replacing thin-film metal with a high-temperature superconductor in a practical circuit. Measured insertion losses in liquid nitrogen were superior to the loss of a similar thin-film copper filter throughout the 0- to 9.5-GHz passband. These results demonstrate the performance of fully patterned YBCO in a practical CPW structure after sealing in a hermetic package.

Chew, Wilbert↗
NASA NTRS1991

Coplanar waveguide feeds for phased array antennas

The design and performance is presented of the following coplanar waveguides (CPW) microwave distribution networks for linear as well as circularly polarized microstrip patches and dipole arrays: (1) CPW/microstrip line feed; (2) CPW/balanced stripline feed; (3) CPW/slotline feed; (4) grounded CPW/balanced coplanar stripline feed; and (5) CPW/slot coupled feed. Typical measured radiation patterns are presented, and their relative advantages and disadvantages are compared.

Simons, Rainee N.↗
NASA NTRS1992

Channelized-Coplanar-Waveguide PIN-Diode Switches

Three positive/intrinsic/negative (PIN-diode) reflective CPW (coplanar waveguide) switches demonstrated. First includes series-mounted diode to bridge gap in center strip conductor of CPW. Second includes pair of diodes to short center strip conductor to ground planes. Third includes diode to switch between band-pass filter and notch filter. Isolation exceeds 20 dB, while insertion loss is less than 1 dB.

Ponchak, G. E.↗
NASA NTRS1992

Superconductive Coplanar-Waveguide Filters

Coplanar-waveguide microwave low-pass filters based on thin films of high-critical-temperature superconductor YBa2Cu3O7 built and tested. Designed to provide passband of 0 to 9.5 GHz. Dimensions suitable for microwave integrated circuits and chosen to provide fairly stringent test of usefulness and practicality of design and of method of fabrication. Insertion loss less than filter made with copper.

Chew, Wilbert↗
NASA NTRS1991

A portable Ku-band front-end test package for beam-waveguide antenna performance evaluation

A 34-m beam-waveguide (BWG) antenna has been built a Deep Space Station 13 (DDS 13) in the Goldstone Deep Space Communications Complex. This antenna is designed to be efficient at X-, Ku-, and Ka-bands, and it is the first NASA tracking antenna to use a BWG design. The design of a Ku-band test package for the new BWG antenna at 11.7-12.2 GHz is presented. Results of linear polarization measurements with the test package on the ground are also presented. This report is the fifth in a series of articles concerned with test package design and performance.

Otoshi, T. Y.↗
NASA NTRS1991

A proposed far-field method for frequency-stability measurements on the DSS 13 beam-waveguide antenna

A method for measuring the frequency stability of the beam-waveguide (BWG) antenna at Deep Space Station 13 is presented. This method is relatively inexpensive and primarily utilizes equipment that is already available. Another desirable feature of the method is that a far-field signal will be used for the measurement. In concert with the goal of employing new technology developments, a fiber optic system will be used at 12 GHz to carry a reference antenna signal to the BWG antenna Ku-band test-package location in the pedestal room.

Otoshi, T. Y.↗
NASA NTRS1991

A novel noncontacting waveguide backshort for millimeter and submillimeter wave frequencies

A new noncontacting waveguide backshort was developed for millimeter and submillimeter wave frequencies. It employs a metallic bar with rectangular or circular holes. The size and spacing of the holes are adjusted to provide a periodic variation of the guide impedance on the correct length scale to give a large reflection of RF frequency power. This design is mechanically rugged and can be easily fabricated for millimeter wave frequencies above 300 GHz where conventional backshorts are difficult to fabricate. Model experiments were performed at 4 to 6 GHz to optimize the design. Values of reflected power greater than 95 percent over a 30 percent bandwidth were achieved. The design was scaled to WR-10 band (75 to 110 GHz) with comparably good results.

Mcgrath, W. R.↗
NASA NTRS1992

DSS-13 beam-waveguide antenna performance in the bypass mode

A new 34-meter beam-waveguide (BWG) antenna that contains two microwave paths, a centerline feed system, and a bypass feed system, was built at the Deep Space Station 13 (DDS 13) at Goldstone, California. Previous articles have described the test results from the evaluation of the centerline BWG feed system in the receive mode as well as the test package hardware used to perform these tests. The test results from the evaluation of the bypass BWG feed system on the DSS-13 antenna in the receive mode, including the operating noise-temperature and the antenna-area-efficiency measurements, are presented.

Stewart, S. R.↗
NASA NTRS1992

The electrical conductivities of the DSS-13 beam-waveguide antenna shroud material and other antenna reflector surface materials

A significant amount of noise temperature can potentially be generated by currently unknown dissipative losses in the beam waveguide (BWG) shroud. The amount of noise temperature contribution from this source is currently being studied. In conjunction with this study, electrical conductivity measurements were made on samples of the DSS-13 BWG shroud material at 8.420 GHz. The effective conductivities of unpainted and painted samples of the BWG shroud were measured to be 0.01 x 10(exp 7) and 0.0036 x 10(exp 7) mhos/m, respectively. This value may be compared with 5.66 x 10(exp 7) mhos/m for high conductivity copper.

Otoshi, T. Y.↗
NASA NTRS1992

Performance of a 12-GHz fiber-optic system for beam-waveguide antenna stability testing

A 12-GHz fiber-optic system is a critical part of a test configuration that was proposed for measuring the fractional frequency stability of the Deep Space Station (DSS)-13 beam-waveguide (BWG) antenna. This fiber-optic system is used to carry Ku-band (12-GHz) signals from a reference antenna to the DSS-13 BWG pedestal room. Tests performed only on the fiber-optic system portion of the overall test configuration showed that the 12-GHz fiber-optic system (installed at DSS-13) has a frequency stability of about 1.1 x 10(exp -16) for sampling time tau = 1000 sec for a nighttime run. This preliminary result establishes the lowest noise floor that can probably be achieved for the test configuration that will be used to measure the frequency stability of the DSS-13 BWG antenna.

Otoshi, T. Y.↗
NASA NTRS1992

Optimizing the G/T ratio of the DSS-13 34-meter beam-waveguide antenna

Calculations using Physical Optics computer software were done to optimize the gain-to-noise-temperature (G/T) ratio of Deep Space Station (DSS)-13, the Deep Space Network's (DSN's) 34-m beam-waveguide antenna, at X-band for operation with the ultra-low-noise amplifier maser system. A better G/T value was obtained by using a 24.2-dB far-field-gain smooth-wall dual-mode horn than by using the standard X-band 22.5-dB-gain corrugated horn.

Esquivel, M. S.↗
NASA NTRS1992

Coplanar waveguide feeds for phased array antennas

The design and performance of the following coplanar waveguide (CPW) microwave distribution networks for linear as well as circularly polarized microstrip patches and printed dipole arrays is presented: (1) CPW/microstrip line feed; (2) CPW/balanced stripline feed; (3) CPW/slotline feed; (4) grounded CPW (GCPW)/balanced coplanar stripline feed; and (5) CPW/slot coupled feed. Typical measured radiation patterns are presented, and their relative advantages and disadvantages are compared.

Simons, Rainee N.↗
NASA NTRS1992

Electromagnetic coupling between coplanar waveguide and microstrip antennas

Electromagnetic coupling between coplanar waveguides (CPW) and microstrip patch antennas has been investigated for two feed configurations: (1) direct aperture-coupled feeding of a patch antenna by a CPW feed, and (2) proximity-coupled feeding of a patch antenna by a microstrip line which is aperture-coupled to a CPW feed. Results indicate that both feeding approaches are feasible and yield high coupling efficiency.

Simons, Rainee N.↗
NASA NTRS1991

Analysis of EM penetration into and scattering by electrically large open waveguide cavities using Gaussian beam shooting

Gaussian beam (GB) representation methods are used to analyze the electromagnetic coupling into and the scattering by a large nonuniform cavity. The aperture field in the cavity is decomposed into beams using the Gabor expansion, and shooting techniques are then employed. The method is illustrated only for the two-dimensional (2-D) case. The GBs are tracked axially using the rules of beam optics which ignore any beam distortion upon reflection at the walls. The effects of beam distortion are not significant for relatively slowly varying waveguide cavities. The field scattered into the exterior by the termination within the cavity is found using a reciprocity integral formulation which requires a knowledge of the beam fields near the termination. Numerical results based on this GB approach are presented and compared with results based on an independent reference solution.

Burkholder, Robert J.↗
NASA NTRS1992

New Techniques for Exciting Linearly Tapered Slot Antennas with Coplanar Waveguide

Two new techniques for exciting a linearly tapered slot antenna (LTSA) with coplanar waveguide (CPW) are introduced. In the first approach, an air bridge is used to couple power from a CPW to an LTSA. In the second approach, power is electromagnetically coupled from a finite CPW (FCPW) to an LTSA. Measured results at 18 GHz show excellent return loss and radiation patterns.

Simons, R. N.↗
NASA NTRS1992

Coplanar waveguide aperture-coupled microstrip patch antenna

The performance characteristics of a coplanar waveguide (CPW) aperture-coupled microstrip patch antenna was investigated experimentally. A grounded CPW with a series gap in the center strip conductor was used to couple microwave power to the antenna through an aperture in the common ground plane. Results indicate good coupling efficiency and confirms the feasibility of this feeding technique.

Lee, Richard Q.↗