Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vinyl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Self-Assembly and Post-Fabrication Functionalization of Microphase Separated Thin Films of a Reactive Azlactone-Containing Block Copolymer

We report on the thin film self-assembly and post-fabrication functionalization of cylinder-forming poly(styrene-block-2-vinyl-4,4-dimethylazlactone) (PS-b-PVDMA) block copolymers (BCPs). Thermal annealing of an asymmetric BCP composition, to drive microphase separation in thin films, results in high defect densities and poor long-range order. Using FTIR spectroscopy and ellipsometry, we demonstrate that thermal annealing results in reactions between the azlactone groups and the underlying substrate leading to BCP “pinning”. Further, we demonstrate that solvent annealing circumvents these issues and drives high fidelity microphase separation of the BCP in thin films. The solvent annealing approach also enables control over domain orientation; we show that parallel and perpendicularly oriented cylinders with diameters of 11.7 ± 1.2 nm and a center-to-center distance of 25.2 ± 2.6 nm can be obtained using a BCP with M n = 29.5 kDa and f S = 0.75. The PVDMA segments in these self-assembled thin films remain available for reaction with primary amine-functionalized nucleophiles. X-ray photoelectron spectroscopy (XPS) depth-profiling reveals that reactions between azlactone groups and incoming amines occur primarily in the top few nanometers of the reactive domains. Finally, we demonstrate that the azlactone groups in both parallel and perpendicularly oriented cylindrical thin films can selectively incorporate trimethylaluminum vapor, which can be subsequently converted into Al 2 O 3 nanowires and nanodots with dimensions of 16 and 12 nm, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Confinement Effects on Host Chain Dynamics in Polymer Nanocomposite Thin Films

Incorporating nanoparticles (NPs) within a polymer host to create polymer nanocomposites (PNCs) while having the effect of increasing the functionality (e.g., sensing, energy conversion) of these materials influences other properties. One challenge is to understand the effects of nanoparticles on the viscosity of nanoscale thick polymer films. A new mechanism that contributes to an enhancement of the viscosity of nanoscale thick polymer/nanoparticle films is identified. We show that while the viscosities of neat homopolymer poly(2-vinylpyridine) (P2VP) films as thin as 50 nm remained the same as the bulk, polymer/nanoparticle films containing P2VP brush-coated gold NPs, spaced 50 nm apart, exhibited unprecedented increases in viscosities of over an order of magnitude. For thicker films or more widely separated NPs, the chain dynamics and viscosities were comparable to the bulk values. These results - NP proximities and suppression of their dynamics - suggest a new mechanism by which the viscosities of polymeric liquids could be controlled for nanoscale applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Effect of Chain Rigidity on the Decoupling of Ion Motion from Segmental Relaxation in Polymerized Ionic Liquids: Ambient and Elevated Pressure Studies

Conductivity in polymer electrolytes has been generally discussed with the assumption that the segmental motions control charge transport. However, much less attention has been paid to the mechanism of ion conductivity where the motions of ions are less dependent (decoupled) on segmental dynamics. We present that this phenomenon is observed in ionic materials as they approach their glass transition temperature and becomes essential for design and development of highly conducting solid polymer electrolytes. In this paper, we study the effect of chain rigidity on the decoupling of ion transport from segmental motion in three polymerized ionic liquids (polyILs) containing the same cation–anion pair but differing in flexibility of the polymer backbones and side groups. Analysis of dielectric and rheology data reveals that decoupling is strong in vinyl-based rigid polymers while almost negligible in novel siloxane-based flexible polyILs. To explain this behavior, we investigated ion and chain dynamics at ambient and elevated pressure. Our results suggest that decoupling has a direct relationship to the frustration in chain packing and free volume. Finally, these conclusions are also supported by coarse-grained molecular dynamics simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Role of Thickness Confinement on Relaxations of the Fast Component in a Miscible A/B Blend

Spatial compositional heterogeneity strongly influences the dynamics of the A and B components of bulk miscible blends. Its effects are especially apparent in mixtures, such as poly(vinyl methyl ether) (PVME)/polystyrene (PS), where there exist significant disparities between the component glass transition temperatures (Tgs) and relaxation times. The relaxation processes characterized by distinct temperature dependencies and relaxation rates manifest different local compositional environments for temperatures above and below the glass transition temperature of the miscible blend. This same behavior is shown to exist in miscible PS/PVME films as thin as 100 nm. Moreover, in thin films, the characteristic segmental relaxation times t of the PVME component of miscible PVME/PS blends confined between aluminum (Al) substrates decrease with increasing molecular weight M of the PS component. These relaxation rates are film thickness dependent, in films up to a few hundred nanometers in thickness. This is in remarkable contrast to homopolymer films, where thickness confinement effects are apparent only on length scales on the order of nanometers. These surprisingly large length scales and M dependence are associated with the preferential interfacial enrichment - wetting layer formation - of the PVME component at the external Al interfaces, which alters the local spatial blend composition within the interior of the film. The implications are that the dynamics of miscible thin film blends are dictated in part by component Tg differences, disparities in component relaxation rates, component-substrate interactions, and chain lengths (entropy of mixing).

36 MATERIALS SCIENCE↗
DOE OSTI2018

Versatile Synthesis of Amine-Reactive Microgels by Self-Assembly of Azlactone-Containing Block Copolymers

Relations between molecular design, chemical functionality, and stimulus-triggered response are important for a variety of applications of polymeric systems. In this paper, reactive amphiphilic block copolymers (BCPs) of poly(2-vinylpyridine)-block-poly(2-vinyl-4,4-dimethylazlactone) (PVP-b-PVDMA) were synthesized and assembled into microgels capable of incorporating functional amines. The composition of the PVP-b-PVDMA BCPs was varied to control the number of reactive sites in the spherical aggregates created by self-assembly of PVP-b-PVDMA BCPs in a 2-propanol/THF (v:v = 19:1) solvent mixture, which is selective for PVP. PVDMA and PVP segments were selectively cross-linked by 1,4-diaminobutane (DAB) or 1,4-diiodobutane (DIB) to fabricate core- and corona-cross-linked azlactone-containing microgels, respectively. Non-cross-linked aggregates of PVP-b-PVDMA and DIB-cross-linked microgels dissociate when exposed to THF, which is a good solvent for both blocks. However, the DAB-cross-linked BCP microgels swell in THF, suggesting the formation of a stable, three-dimensional network structure. Finally, because of their ability to be reactively modified in ways that allows their stability or disassembly characteristics to be tailored, these azlactone-containing BCP microgels provide an attractive platform for applications in a wide range of fields, including catalysis, imaging, molecule separation, and guest loading for targeted delivery.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Elimination of CO 2 /N 2 Langmuir Sorption and Promotion of “N 2 -Phobicity” within High- T g Glassy Membranes

In this work, we demonstrate that the CO 2 /N 2 gas separation performance of alkoxysilyl-substituted vinyl-added polynorbornenes (VAPNBs) may be significantly enhanced via incorporation of the monomer 5-tris(2-methoxyethoxy)-silyl-2-norbornene. As the molar ratio of this monomer is increased, substantial increases in CO 2 /N 2 selectivity are realized with minimal decrease in CO 2 permeability. This trend ignores the traditional permeability/selectivity “tradeoff” relationship and yields an optimal membrane whose performance reaches the 2008 upper bound for CO 2 /N 2 separations. Though the inclusion of 5-tris(2-methoxyethoxy)-silyl-2-norbornene units was initially hypothesized to maximize CO 2 solubility, detailed gas sorption studies reveal that these highly glassy materials essentially lack any Langmuir sorption component and indicate that their improved CO 2 /N 2 selectivity is due to decreased N 2 solubility within the matrix. Computational modeling suggests that the source of this apparent “N 2 -phobicity” is likely explained through comparative analyses of polymer–polymer and polymer–gas interactions. Lastly, mixed-gas permeation tests are performed to provide a more realistic look at real-world gas separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Understanding the Influence of Chain Architecture on the Transport Quantities of Polymer Electrolytes with Covalently Bonded Anions

Here, we use a combination of experiments and coarse-grained molecular dynamics simulations to elucidate the structure–property relationships in polymer electrolytes obtained by the copolymerization of poly(vinyl ethylene carbonate─lithium styrene bis(trifluoromethanesulfonyl)imide) or p(VEC-LiSTFSI). Experiments show that the conductivity reduces with increasing anion (i.e., STFSI) fraction on the chain, and the cation transference number (t + ) is found to be dependent on the anion fraction. Furthermore, a significant fraction of unpolymerized VEC monomers are observed. Since it is inherently difficult to experimentally control the chain architecture and the amount of unpolymerized VEC in these systems, we perform coarse-grained molecular dynamics simulations on model polymer systems with different chain architectures to mimic the plausible experimental systems. Specifically, we look at the differences in transference numbers arising from (i) a random copolymer of VEC and STFSI monomers; (ii) a blend of VEC-STFSI copolymer with VEC monomers; and (iii) a ternary blend of the VEC homopolymer, STFSI homopolymers, and VEC monomers. The ternary blend model demonstrates the closest resemblance with the experimental transference numbers and diffusivities. The lithium diffusivity obtained from the coarse-grained models with VEC monomers (plasticizers) is about 1.5 times that of the model without VEC monomers, showing that the plasticizing effect of VEC monomers is modest. We rationalize the experimental observations based on aggregate and cluster analyses obtained from molecular simulations. This work reveals that polymer electrolyte chain architecture and plasticizers can critically influence the transport properties, and these parameters should be considered when designing single ion conducting polymeric electrolytes.

cluster distribution↗
DOE OSTI2020

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell

The development of membranes with low fuel crossover and high fuel efficiency is a key issue in direct borohydride fuel cells (DBFCs). In previous work, we produced a poly(vinyl alcohol) (PVA)-anion-exchange resin (AER) membrane with a low fuel crossover and a low fuel efficiency by introducing Co ions. In this work, a bilayer membrane was designed to improve the fuel efficiency and cell performance. The bilayer membrane was prepared by casting a PVA-AER wet gel onto the partially desiccated Co-PVA-AER gel. The bilayer membrane showed a borohydride permeability of 1.34 × 10 –6 cm 2 ·s –1 , which was even lower than that of the Co-PVA-AER membrane (1.98 ×10 –6 cm 2 ·s –1 ) and the PVA-AER membrane (2.80 × 10 –6 cm 2 ·s –1 ). The DBFC using the bilayer membrane exhibited a higher fuel efficiency (37.4%) and output power (1.73 Wh) than the DBFCs using the Co-PVA-AER membrane (33.3%, 1.27 Wh) and the PVA-AER membrane (34.3%, 1.2 Wh). Furthermore, the DBFC using the bilayer membrane achieved a peak power density of 327 mW·cm –2 , which was 2.14 times of that of the DBFC using the PVA-AER membrane (153 mW·cm –2 ). Finally, the drastic improvement benefited from the bilayer design, which introduced an interphase to suppress fuel crossover and avoided unnecessary borohydride hydrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Structural Evidence for Interfacial Gradients in Asymmetric Polymer Nanocomposite Blends

Understanding the complex structure of polymer blends filled with nanoparticles (NPs) is key to design their macroscopic properties. In this work, the spatial distribution of hydrogenated (H) and deuterated (D) polymer chains asymmetric in mass is studied by small-angle neutron scattering. Depending on the chain mass, a qualitatively new large-scale organization of poly(vinyl acetate) chains beyond the random-phase approximation is evidenced in nanocomposites with attractive polymer–silica interactions. The silica is found to systematically induce bulk segregation. Only with long H-chains, a strong scattering signature is observed in the q range of the NP size: it is the sign of interfacial isotopic enrichment, that is, of contrasted polymer shells close to the NP surface. A quantitative model describing both the bulk segregation and the interfacial gradient (over ca. 10–20 nm depending on the NP size) is developed, showing that both are of comparable strength. In all cases, NP surfaces trap the polymer blend in a non-equilibrium state, with preferential adsorption around NPs only if the chain length and isotopic preference toward the surface combine their entropic and enthalpic driving forces. This structural evidence for interfacial polymer gradients will open the road for quantitative understanding of the dynamics of many-chain nanocomposite systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Integrative Additive Design for Robust SEI Formation in NMC811||Silicon Batteries

Silicon (Si) is considered a promising replacement for graphite anodes in lithium-ion batteries (LIBs) due to its high abundance and exceptional specific capacity, but its widespread commercialization has been hindered by poor electrochemical performance. Among various strategies, the use of functional additives has emerged as one of the most effective and cost-efficient methods to enhance the electrochemical properties of LIBs. In this study, several additives—vinylene carbonate (VC), vinyl ethylene carbonate (VEC), lithium difluorophosphate (LiDFP), lithium difluoro(oxalato)borate (LiDFOB), lithium tetrafluorooxalatophosphate (LiTFOP), and lithium difluorobis(oxalato)phosphate (LiDFBOP)—were systematically investigated in LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811)||Si full cells. Notably, LiDFBOP, a lithium salt containing two oxalate groups, outperformed all other additives, delivering the best capacity retention after 300 cycles. Comprehensive characterizations, including FTIR, SEM, and XPS, revealed that LiDFBOP's superior performance stems from its ability to form a more stable solid electrolyte interphase (SEI) on the Si anode, owing to its favorable molecular structure that integrates the beneficial features of the other additives.

25 ENERGY STORAGE↗
DOE OSTI2017

Electrochemical Characterization and Catalytic Application of Gold-Supported Ferrocene-Containing Diblock Copolymer Thin Films in Ethanol Solution

This study reports the electrochemical behavior and catalytic property of electrode-supported thin films of polystyrene- block -poly(2-(acryloyloxy)ethyl ferrocenecarboxylate) (PS- b -PAEFc) in an ethanol (EtOH) solution. The electrochemical properties of PS- b -PAEFc films with different PAEFc volume fractions (f PAEFc = 0.47, 0.30, and 0.17) in 0.1 M ethanolic sodium hexafluorophosphate were compared with those in an acetonitrile (MeCN) solution of 0.1 M tetrabutylammonium hexafluorophosphate. Pristine PS- b -PAEFc films did not afford significant faradaic currents in the EtOH solution because EtOH is a nonsolvent for both PS and PAEFc. However, the films could be rendered redox-active in the EtOH solution by applying potentials in the MeCN solution to induce the redox-associated incorporation of the supporting electrolytes into the films. Atomic force microscopy images verified the stability of PAEFc microdomains upon electrochemical measurements in these solutions. Cyclic voltammograms measured in the EtOH solution for PS- b -PAEFc with the larger f PAEFc were diffusion-controlled regardless of ellipsometric film thickness (23 – 152 nm) at relatively slow scan rates, in contrast to those in the MeCN solution that were controlled by surface-confined redox species. The electron propagation efficiency in the EtOH solution was significantly lower than that in the MeCN solution due to the poorer swelling of the films, which limited the migration of counter ions and the collisional motions of the ferrocene moieties. PS- b -PAEFc films were applied as electrochemically-responsive heterogeneous catalysts based on the ferrocenium moieties for Michael addition reaction between methyl vinyl ketone and ethyl 2-oxocyclopentanecarboxylate (E2OC) in 0.1 M NaPF 6 /EtOH. The catalytic activities of thin films were similar regardless of f PAEFc , suggesting that the catalytic reaction took place for the reactants that could penetrate through the film and reach PAEFc microdomains communicable with the underlying electrode. Interestingly, the permeability of PS-b-PAEFc films provided a means to control the reaction selectivity, as suggested by negligible reaction of E2OC with trans -4-phenyl-3-buten-2-one.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Enhanced Flux and Electrochemical Cleaning of Silicate Scaling on Carbon Nanotube-Coated Membrane Distillation Membranes Treating Geothermal Brines

The desalination of inland brackish groundwater offers the opportunity to provide potable drinking water to residents and industrial cooling water to industries located in arid regions. Geothermal brines are used to generate electricity, but often contain high concentrations of dissolved salt. Here in this paper, we demonstrate how the residual heat left in spent geothermal brines can be used to drive a membrane distillation (MD) process and recover desalinated water. Porous polypropylene membranes were coated with a carbon nanotube (CNT)/poly(vinyl alcohol) layer, resulting in composite membranes having a binary structure that combines the hydrophobic properties critical for MD with the hydrophilic and conductive properties of the CNTs. We demonstrate that the addition of the CNT layer increases membrane flux due to enhanced heat transport from the bulk feed to the membrane surface, a result of CNT's high thermal transport properties. Furthermore, we show how hydroxide ion generation, driven by water electrolysis on the electrically conducting membrane surface, can be used to efficiently dissolve silicate scaling that developed during the process of desalinating the geothermal brine, negating the need for chemical cleaning.

15 GEOTHERMAL ENERGY↗
DOE OSTI2018

Transparent Conductive Adhesives for Tandem Solar Cells Using Polymer-Particle Composites

Transparent conductive adhesives (TCAs) can enable conductivity between two substrates, which is useful for a wide range of electronic devices. Here, we have developed a TCA composed of a polymer-particle blend with ethylene-vinyl acetate as the transparent adhesive and metal-coated flexible poly(methyl methacrylate) microspheres as the conductive particles that can provide conductivity and adhesion regardless of the surface texture. This TCA layer was designed to be nearly transparent, conductive in only the out-of-plane direction, and of practical adhesive strength to hold the substrates together. The series resistance was measured at 0.3 and 0.8 O cm2 for 8 and 0.2% particle coverage, respectively, while remaining over 92% was transparent in both cases. For applications in photovoltaic devices, such as mechanically stacked multijunction III-V/Si cells, a TCA with 1% particle coverage will have less than 0.5% power loss due to the resistance and less than 1% shading loss to the bottom cell.

14 SOLAR ENERGY↗
DOE OSTI2020

Polysiloxane Scintillators for Efficient Neutron and Gamma-Ray Pulse Shape Discrimination

Plastic scintillators based on thermoplastics, such as polystyrene and poly(vinyl toluene) (PVT), are capable of neutron and γ radiation detection via pulse shape discrimination (PSD) when overdoped with select fluorescent molecules. This class of plastic scintillator has been extensively studied but is limited to applications suitable for thermoplastics. For applications requiring flexibility, scintillators composed of elastomers, such as polysiloxanes, offer an alternative to PVT scintillators. Polysiloxane scintillators are inherently flexible and have a short processing time on the order of 3 h in air and equivalent or better detection capability at reduced doping concentration (<5 wt %). This work presents polysiloxane-based scintillators, containing only 1–5 wt % of 2,5 diphenyl-oxazole (PPO) or 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) as primary dopants and 9,9-dimethyl-2,7-distyryl-9H-fluorene (SFS) as a wavelength shifter. A 5 wt % PPO polysiloxane sample had improved neutron and gamma ray PSD and comparable light yield than EJ-299-33 tested under the same conditions, i.e., figure of merit (FoM) of 1.33 ± 0.03 at 450 keV ee and light yield of 94% relative to EJ-299-33. The 5 wt % PhF-polysiloxane sample had a higher light yield, 144% of EJ-299-33 but lower FoM under the same conditions (FoM of 1.09 ± 0.03). Furthermore, this work highlights the potential of polysiloxanes as a matrix for PSD capable plastic scintillators.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigating Silver Nanoparticle Interactions with Quaternary Ammonium Functionalized Triblock Copolymers and Their Effect on Midblock Crystallinity

Interactions between silver nanoparticles and a cationic triblock copolymer significantly alter bulk material properties and can be tuned by functionalizing the polymer with different quaternary ammonium cations (QACs). In this work, poly-chloromethylstyrene-b-polycyclooctene-b-polychloromethylstyrene (PCMS-b-PCOE-b-PCMS) was quaternized with either methylpiperidinium (MPRD) or trimethylammonium (TMA). The surface interacting groups were identified using FT-IR to be the phenyl rings, the QACs from the outer blocks, and vinyl groups from the PCOE midblock. Changes in thermal characteristics and crystallinity were highly dependent on the QAC, uncovering differences in the nature of the interactions between silver and TMA or MPRD. Interactions induced by TMA greatly hinder crystalline domain formation and give rise to a higher water content, while MPRD promotes certain crystalline orientations and provides a greater degree of crystallinity with a lower water content. In this work, our findings demonstrate that bulk polymer characteristics can be tuned, a highly desirable attribute for many nanocomposite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mucus-Inspired Tribology, a Sticky Yet Flowing Hydrogel

The mucus blanket can trap foreign particles before they enter the lungs, while at the same time, it flows up to remove these particles. This manifests the dual nature of mucus: sticky, on one hand, and fluid, on the other. Inspired by this function of mucus in the lungs, we designed a mucus simulant which emulates this dual nature. While many existing mucus simulants do not target bioadhesion particularly, poly(vinyl alcohol) (PVA)-based simulants make an exception. Despite their bioadhesion tendency, unlike mucus, they do not gelate. In this study, we added a physical cross-linking agent to PVA in order to add the gelation aspect and to better represent mucous properties. We show that the resultant mucus simulant develops into two regions: a highly sticky region near the surface of a foreign object (we used hydrophobized silicon to mimic the foreign object) and a fluid region far away from that surface. We show that the sticky part can slide past the less sticky part, while the foreign object is stuck to it. However, this mechanism changes with time. At short gelation times, this tendency to separate into two parts is enhanced and the foreign object remains stuck, while the rest of the gel flows. With time, the force required to allow the sticky part to slide over the fluid part is further reduced. However, if the gelation is allowed to proceed for even longer times without disturbance, the force required to slide the two parts past each other increases and the separation between the two parts is inhibited. The hydrogel becomes a sticky goo, which requires a higher force to move or unclog if placed in a duct (much like what happens with mucus in the tracheal duct). We explain the physics of our findings in terms of a competition between the tendency of the polymer to form a gel network and the tendency of the polymer to adsorb onto the foreign object.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrodechlorination of 1,2-Dichloroethane on Platinum Catalysts: Insights from Reaction Kinetics Experiments, Density Functional Theory, and Microkinetic Modeling

Catalytic hydrodechlorination is a promising strategy for treating industrial 1,2-dichloroethane wastes, for which Pt and Pt-based alloy catalysts are widely used. Here, we performed a detailed mechanistic study for 1,2-dichloroethane hydrodechlorination on Pt using a synergistic approach combining density functional theory (DFT) calculations, reaction kinetics experiments, and microkinetic modeling. Using planewave DFT calculations, we evaluated the reaction energy and activation energy barrier of each elementary step involved in the reaction network on Pt(111). The calculated energetics were then incorporated into a comprehensive mean-field microkinetic model accounting for a total of 65 elementary steps. The model-predicted reaction rates were compared with the results from our reaction kinetics experiments on SiO2-supported Pt catalysts. Our results indicated that the hydrodechlorination of 1,2-dichloroethane on Pt(111) starts with a H-removal step; then, it proceeds through a sequence of alternating dechlorination and dehydrogenation steps until vinylidene (CH 2 C*) is formed; finally, CH 2 C* is hydrogenated to the final product, ethane, sequentially via vinyl (CH 2 CH*), ethylene, and ethyl (CH 3 CH 2 *) intermediates. After model parameter adjustments, we achieved good agreement between our theoretical model and experimental results; the adjustments to the calculated parameters are consistent with the typically anticipated coverage effects. Furthermore, our study offers valuable mechanistic insights, which are useful for improving catalysts for this chemistry.

1,2-dichloroethane↗
DOE OSTI2021

An Iron-Based Dehydration Catalyst for Selective Formation of Styrene

In this work, we report the synthesis and crystal structure of [Fe(OTf) 2 (FOX)] (A). This robust iron(II) complex was successfully applied as a homogeneous catalyst for the dehydration of 1-phenylethanol to styrene. Even at low catalyst loadings and moderate reaction temperatures, A showed a high catalytic efficiency. It was found to selectively activate the benzylic alcohol group of 1-phenylethanol. This is challenging since the vinyl system of styrene is highly reactive. In contrast to most of the other dehydration processes, the use of a Brønsted acid was not necessary. Furthermore, mechanistic insights into this E 1 -type transformation and its competing S N 1-type side reactions are reported. [Fe( c HexOH)(OTf)(FOX)][OTf] (B), an alcohol adduct of A, [Fe(H 2 O) 2 (FOX)][OTf] 2 (C), the completely hydrated derivative of A, and [μ-O{Fe(OTf)(FOX)} 2 ][OTf] 2 (D), a dinuclear oxidation product of A, were also characterized and are discussed.

02 PETROLEUM↗