Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Photocatalytic properties of Au-deposited mesoporous SiO{sub 2}–TiO{sub 2} photocatalyst under simultaneous irradiation of UV and visible light

Mesoporous SiO{sub 2} templates deposited TiO{sub 2} nanocrystals are synthesized via a sol–gel route, and Au nanoparticles (NPs) are deposited in the tubular mesopores of the templates by a photodeposition method (Au/SiO{sub 2}–TiO{sub 2}). The photocatalytic characteristics of Au/SiO{sub 2}–TiO{sub 2} are discussed with the action spectra of photoreactions of 2-propanol and methylene blue. Photocatalytic activities of SiO{sub 2}–TiO{sub 2} under individual ultraviolet (UV) and visible (Vis) light illumination are enhanced by deposition of Au NPs. Furthermore, Au/SiO{sub 2}–TiO{sub 2} shows higher photocatalytic activities under simultaneous irradiation of UV and Vis light compared to the activity under individual UV and Vis light irradiation. Since the photocatalytic activity under simultaneous irradiation is almost the same as the total activities under individual UV and Vis light irradiation, it is concluded that the electrons and the holes generated by lights of different wavelengths are efficiently used for photocatalysis without carrier recombination. - Graphical abstract: This graphic shows the possible charge behavior in Au/SiO{sub 2}–TiO{sub 2} under independent light irradiation of ultraviolet and visible light irradiation. Both reactions under independent UV and Vis light irradiation occurred in parallel when Au/SiO{sub 2}–TiO{sub 2} photocatalyst was illuminated UV and Vis light simultaneously, and then photocatalytic activity is improved by simultaneous irradiation. - Highlights: • Au nanoparticles were deposited in mesoporous SiO{sub 2}–TiO{sub 2} by a photodeposition method. • Photocatalytic activity under UV and Vis light was enhanced by deposition of Au. • Photocatalytic activity of Au/SiO{sub 2}–TiO{sub 2} was improved by simultaneous irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave hydrothermal synthesis of AgInS{sub 2} with visible light photocatalytic activity

Highlights: {yields} AgInS{sub 2} nanoparticles were synthesized by a microwave hydrothermal method. {yields} This method involves no organic solvents, catalysts, or surfactants. {yields} AgInS{sub 2} showed higher activity for photocatalytic degradation MO than TiO{sub 2-x}N{sub x}. {yields} Holes, O{sub 2}{center_dot}{sup -}, and H{sub 2}O{sub 2} played an important role in the photocatalytic process. -- Abstract: AgInS{sub 2} nanoparticles with superior visible light photocatalytic activity were successfully synthesized by a microwave hydrothermal method. This method is a highly efficient and rapid route that involves no organic solvents, catalysts, or surfactants. The photocatalytic activity of AgInS{sub 2} nanoparticles was investigated through the degradation of dyes under visible light irradiation. Compared with TiO{sub 2-x}N{sub x}, AgInS{sub 2} has exhibited a superior activity for photocatalytic degradation MO under the same condition. The experiment results showed that superoxide radicals (O{sub 2}{center_dot}{sup -}), hydrogen peroxides (H{sub 2}O{sub 2}) and holes (h{sup +}) were the mainly active species for the degradation of organic pollutants over AgInS{sub 2}. Through the determination of flat band potential, the energy band structure of the sample was obtained. A possible mechanism for the degradation of organic pollutant over AgInS{sub 2} was proposed.

36 MATERIALS SCIENCE↗

Fabrication of the C-N co-doped rod-like TiO{sub 2} photocatalyst with visible-light responsive photocatalytic activity

Highlights: ► Novel synthesis of C-N co-doped TiO{sub 2}. ► Self-assembly of C-N co-doped TiO{sub 2} nanorods by nanoparticles. ► Excellent photocatalytic efficiency. -- Abstract: The C-N co-doped TiO{sub 2} nanorods were synthesized by the vapor transport method of water molecules, and urea was used as the carbon and nitrogen source. The samples were characterized by X-ray diffraction and photoelectron spectroscopy analysis. The scanning electron microscope images showed that as-prepared TiO{sub 2} powders were nanorods, which were formed by the stacking of nanoparticles with a uniform size around 40 nm. The degradation of methylene blue with the prepared nanorods demonstrated the photocatalytic activities of TiO{sub 2} under visible light are improved by doping with C and N elements. The main reasons were discussed: doping with C and N elements could enhance the corresponding visible-light absorption of TiO{sub 2}. On the other hand, doping C and N could create more oxygen vacancies in the TiO{sub 2} crystals, which could capture the photogenerated electrons more effectively. Thus, more photogenerated holes could be left to improve the photocatalytic activity of TiO{sub 2}.

36 MATERIALS SCIENCE↗

The role of adsorption in decomposition of dyes on TiO{sub 2} and N-modified TiO{sub 2} photocatalysts under UV and visible light irradiations

Graphical abstract: Influence of pH and zeta potential of TiO{sub 2} based photocatalysts on the adsorption and degradation of MB under UV irradiation. Highlights: ► Adsorption of dyes on TiO{sub 2}/N accelerated their decomposition under visible light. ► pH of solution and the PZC of the TiO{sub 2} surface influence the adsorption of dyes. ► Under UV irradiation oxidation of pollutants with OH radicals is the most powerful. -- Abstract: Photoactivities of TiO{sub 2} based photocatalysts towards dyes decomposition was studied by consider their adsorption abilities. It was proved that zeta potential and PZC (point zero charge) of photocatalyst surface as well as pH of solution strongly influenced adsorption of tested dyes, Methylene Blue (MB) and Reactive Red 198 (RR198). These dyes underwent the photocatalytic decomposition by two ways, OH radicals attack and direct oxidation with photogenerated holes. The latter one is more efficient in case of better contact of pollutant with the photocatalysts surface and is dominant under visible light irradiation, where insignificant amount of OH radicals is formed. The former one is powerful under UV irradiation and is a key factor in decomposition of dyes regardless of their adsorption abilities.

36 MATERIALS SCIENCE↗

Low-temperature hydrothermal synthesis of BiFeO{sub 3} microcrystals and their visible-light photocatalytic activity

Highlights: ► Urea-assisted hydrothermal synthesis of pure BiFeO{sub 3} at 120 °C was reported. ► Possible formation mechanism of pure phase BiFeO{sub 3} at low temperature was illuminated. ► BiFeO{sub 3} microcrystals exhibited efficient visible-light photocatalytic activity. -- Abstract: Pure BiFeO{sub 3} (BFO) microcrystals were synthesized at the temperature as low as 120 °C via a urea-assisted hydrothermal process. The crystal structure, morphology and photocatalytic property of BFO microcrystals were investigated. The analysis reveals that the hydrolysis of urea in the hydrothermal process plays a key role in the synthesis of pure phase BFO microcrystals. FE-SEM and TEM results show that these BFO microcrystals present a nearly spherical microstructure, and specially exhibit superstructures consisting of large amounts of small particles with the size of 100–150 nm by further observation. Moreover, these BFO microcrystals exhibit efficient photocatalytic activity under visible-light irradiation, suggesting their promising applications as photocatalysts and related fields.

36 MATERIALS SCIENCE↗

Study of new states in visible light active W, N co-doped TiO{sub 2} photo catalyst

Highlights: ► Visible light efficient W, N co-doped TiO{sub 2} photo catalysts are prepared by sol–gel. ► Oxygen vacancies are detected in the form of new linkages as N-Ti-O, N-W-O, Ti-O-N and W-O-N. ► W, N co-doped titania has new energy states which narrows the band gap effectively. ► Oxygen vacancies are proved to be the cause for high photo catalytic activity. ► W and N co-doping plays the major role to make the composite thermally stable. -- Abstract: The visible light efficient W, N co-doped TiO{sub 2} photo catalysts are prepared by sol–gel method. New linkages of N, W and O are formed as N-Ti-O, N-W-O, Ti-O-N and W-O-N. Electron paramagnetic resonance illustrates the presence of oxygen vacancies in W, N co-doped TiO{sub 2} acting as trapping agencies for electrons to produce active species. X-ray photoelectron spectroscopy confirms the presence of new energy states. New linkages and oxygen vacancies are proved to be the main cause for the improved photo catalytic performances. W, N co-doped TiO{sub 2} has new energy states which narrow the band gap effectively. W, N co-doped TiO{sub 2} is thermally stable and retains its anatase phase up to 900 °C. 4.5% W, N co-doped TiO{sub 2} showed superior activity for the degradation of Rhodamine B and 2,4-dichlorophenol as compared to pure titania, Degussa P-25, traditional N-doped TiO{sub 2} and pure WO{sub 3}.

36 MATERIALS SCIENCE↗

Electrochemically synthesized visible light absorbing vertically aligned N-doped TiO{sub 2} nanotube array films

Graphical abstract: Display Omitted Highlights: ► Single step electrochemical synthesis of N-doped TiO{sub 2} nanotube array films. ► Effective substitutional N-doping achieved. ► Different N-concentrations were achieved by varying the N-precursor concentration in the electrolyte. ► Visible light absorption observed at high N-doping. -- Abstract: Visible light absorbing vertically aligned N-doped anatase nanotube array thin films were synthesized by anodizing Ti foils in ethylene glycol + NH{sub 4}F + water mixture containing urea as nitrogen source. Different nitrogen concentrations were achieved by varying the urea content in the electrolyte. The structure, morphology, composition and optical band gap of the nanotube arrays were determined by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and diffuse reflectance spectroscopy, respectively. The substitution of O{sup 2−} ions by N{sup 3−} ions in the anion sublattice as well as the formulae of the doped samples was confirmed from the results of XPS. The optical band gap of the nanotube arrays was found to decrease with N-concentration. The sample with the highest concentration corresponding to the formula TiO{sub 1.83}N{sub 0.14} showed two regions in the Tauc's plot indicating the presence of interband states.

36 MATERIALS SCIENCE↗

One-pot synthesis and visible light photocatalytic activity of monodispersed AgIn{sub 5}S{sub 8} microspheres

Graphical abstract: Display Omitted Highlights: ► Monodispersed AgIn{sub 5}S{sub 8} microspheres were prepared in a one-pot process. ► The process is environmental friendly. ► The AgIn{sub 5}S{sub 8} microspheres display high photocatalytic activity. -- Abstract: Monodispersed AgIn{sub 5}S{sub 8} microspheres were synthesized using a one-pot solution method and characterized with X-ray diffraction, UV–vis diffuse reflectance spectroscopy, scanning electron microscope, energy dispersive X-ray spectroscopy and N{sub 2} adsorption–desorption isotherm. The results indicated that the AgIn{sub 5}S{sub 8} microspheres were of cubic spinel structure and the mean diameter of about 0.5 μm. In addition, the visible light photocatalytic activity of AgIn{sub 5}S{sub 8} microspheres was also investigated at room temperature. The AgIn{sub 5}S{sub 8} microspheres showed very high photocatalytic activity for the degradation of methyl orange with a degradation efficiency of about 98% under visible light irradiation for 20 min.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates with visible upconversion luminescence by 980 nm excitation

Graphical abstract: The visible upconversion emission including blue emission (487 nm), green emissions (523 nm, 546 nm) and red emission (654 nm) of Er{sup 3+}, Yb{sup 3+} in CeF{sub 3} nanoplates was observed under 980 nm excitation. The emission intensity increases remarkably with the increase of Er{sup 3+} content from x = 0.001 to 0.02 and then decreases obviously with the increase of Er{sup 3+} content ranging from x = 0.02 to 0.25. Highlights: ► CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been successfully synthesized by a solvothermal method with further calcinations. ► The visible upconversion emission of Er{sup 3+}, Yb{sup 3+} in CeF{sub 3} nanoplates was observed and never been reported before. ► The upconversion mechanisms of CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been investigated. -- Abstract: CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been successfully synthesized by a solvothermal method with further calcinations. The crystalline phase, size and optical properties were characterized using powder X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS) and upconversion luminescence (UCL). All the as-prepared samples showed blue emission (487 nm), green emissions (523 nm, 546 nm) and red emission (654 nm) under 980 nm excitation. The main mechanism of upconversion is attributed to the energy transfer (ET) among Yb{sup 3+} and Er{sup 3+} ions in excited states. The results illustrate the large potential of this new class of material for photonic applications involving optoelectronics devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible-light-driven photocatalytic performance of nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solution

Graphical abstract: Display Omitted Highlights: ► Dual modifications on the energy band of TiO{sub 2} are achieved by N and Zr co-doping. ► Nitrogen and zirconium dopants have different doping positions in the catalyst. ► A synergic impact of nitrogen and zirconium on photocatalytic activity is observed. ► A mechanism for the high performance of nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solution is proposed. -- Abstract: Nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solutions have been synthesized by a multi-step sol–gel process followed by hydrothermal treatment in ammonia solution. XRD, XPS and UV–vis diffuse reflectance analyses indicated that nitrogen was doped in the surface layer of catalyst, introducing surface states located close to valence band. However, Zr{sup 4+} was successfully incorporated into the bulk lattice of TiO{sub 2} so as to induce the up-shift of conduction band. Compared to pristine TiO{sub 2} and nitrogen-doped TiO{sub 2}, nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} exhibited much higher efficiency for the degradation of Acid Red 88 solution and gaseous benzene under visible light irradiation, attributed to the synergetic effect of nitrogen and zirconium on the energy band. Specifically, the presence of surface states in the band gap enabled the extended visible light response and the up-shift of conduction band facilitated the excited electron interfacial transfer and hence suppressed efficiently the recombination of charge carriers.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of graphene-Sb{sub 2}S{sub 3} composite and the degradation activity under visible light

Graphical abstract: Display Omitted Highlights: ► Graphene-Sb{sub 2}S{sub 3} composites were synthesized through a facile solvothermal method. ► Hydroxyl radicals are the main species responsible for the photodegradation activity. ► Graphene-Sb{sub 2}S{sub 3} demonstrated dramatically improved visible light degradation activity. -- Abstract: Novel graphene-Sb{sub 2}S{sub 3} (G-Sb{sub 2}S{sub 3}) composites were synthesized via a facile solvothermal method with graphene oxide (GO), SbCl{sub 3} and thiourea as the reactants. GO played an important role in controlling the size and the distribution of the formed Sb{sub 2}S{sub 3} nanoparticles on the graphene sheets with different density. Due to the negative surface charge, smaller Sb{sub 2}S{sub 3} particles size and efficient electrons transfer from Sb{sub 2}S{sub 3} to graphene, the composites demonstrated improved photodegradation activity on rhodamine B (RhB). Among these composites, the product G-Sb{sub 2}S{sub 3} 0.1, which was synthesized with the GO concentration of 0.1 mg/mL, exhibited the highest photodegradation activity owing to the considerable density of Sb{sub 2}S{sub 3} nanoparticles onto graphene sheet free of aggregation. Hydroxyl radicals (·OH) derived from conduction band (CB) electrons of Sb{sub 2}S{sub 3} is suggested to be responsible for the photodegradation of RhB. The high visible light degradation activity and the satisfactory cycling stability made the as-prepared G-Sb{sub 2}S{sub 3} 0.1 an applicable photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of Mn vanadate nanosheets and visible-light photocatalytic performance for the degradation of methyl blue

Graphical abstract: - Highlights: • Mn vanadate nanosheets have been synthesized by simple hydrothermal process. • The formation of Mn vanadate nanosheets can be controlled by growth conditions. • Mn vanadate nanosheets exhibit good photocatalytic activities for methyl blue. - Abstract: Mn vanadate nanosheets have been synthesized via a facile hydrothermal route using ammonium metavanadate and Mn acetate as the raw materials, polyvinyl pyrrolidone (PVP) as the surfactant. X-ray diffraction (XRD) shows that the Mn vanadate nanosheets are composed of monoclinic MnV{sub 2}O{sub 6} phase. Scanning electron microscopy (SEM) observation indicates that the nanosheets have the average thickness of about 50 nm, length of 2–10 μm and width of 800 nm to 2 μm. The growth process of the Mn vanadate nanosheets has also been discussed based on the analysis of the roles of the growth conditions on the formation of the Mn vanadate nanosheets. The nanosheets show good photocatalytic activities for the degradation of methylene blue (MB) under visible light irradiation. About 72.96% MB can be degraded after visible light irradiation for 1 h over 10 mg Mn vanadate nanosheets in 10 mL MB solution with the concentration of 10 mg L{sup −1}.

36 MATERIALS SCIENCE↗

Facile microwave-assisted aqueous synthesis of CdS nanocrystals with their photocatalytic activities under visible lighting

Graphical abstract: - Highlights: • Three kinds of CdS nanostructures have been controllably synthesized. • Ethanediamine acts as a phase and morphology controlling reagent. • Three CdS nanostructures display high visible light photocatalytic activities. • Cubic CdS-3 shows superior photocatalytic activity to the other hexagonal CdS. • The growth processes for fabrication of CdS nanocrystals are also discussed. - Abstract: Three kinds of CdS nanostructures, that is, hexagonal nanospheres (CdS-1), hierarchical caterpillar-fungus-like hexagonal nanorods (CdS-2) and hierarchical cubic microspheres (CdS-3), were controllably synthesized by a facile and one-pot microwave-assisted aqueous chemical method using ethanediamine as a phase and morphology controlling reagent. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectra. The results show that CdS-1 is mainly composed of monodispersed hexagonal nanospheres with average diameters of about 100 nm; hexagonal CdS-2 has lengths in the range of 600–800 nm and diameters of 40–60 nm, assembled by nanoparticles about 20 nm in diameter; and CdS-3 is pure cubic microspheres with diameters in the range of 0.8–1.3 μm, aggregated by tiny nanograins with size of 5.8 nm. The band gap energies of CdS products were calculated to be 2.30, 2.31 and 2.24 eV observed from UV–vis DRS for CdS-1, CdS-2 and CdS-3, respectively. PL spectra of CdS samples showed that sphalerite CdS-3 possesses a very weak fluorescence, while wurtzite CdS-2 has a strongest green near-band edge emission (NBE) at 550 nm. The visible light photodegradation of methylene blue and rhodamine B in the presence of CdS photocatalysts illustrates that all of them display high photocatalytic activities. Significantly, the cubic CdS-3 exhibits more excellent photocatalytic behavior in degradation of organic dyes than the other hexagonal CdS, which is closely related to the phase and morphology structure of cubic CdS.

36 MATERIALS SCIENCE↗

Enhancement of visible light activity in Ag modified SnO{sub 2}/TiO{sub 2}

Graphical abstract: - Highlights: • Ag modified SnO{sub 2}/TiO{sub 2} nanoparticles were synthesized by a modified sol–gel method. • As-prepared samples have a small and uniform particle size of about 20 nm. • As-prepared samples exhibit an excellent photo-catalytic efficiency on the degradation of MB. • As-prepared samples maintain high photo-chemical stability after 5 catalytic cycles. - Abstract: Ag modified SnO{sub 2}/TiO{sub 2} nanoparticles were successfully prepared by a modified sol–gel method, without adding any acid or alkali. The entire preparation differs from the traditional sol–gel synthesis of TiO{sub 2} that the reaction can get controlled by adjusting the flow speed of water vapor. Ultraviolet–visible diffuse reflectance spectra (UV–vis) and spin-trapping electron paramagnetic resonance (EPR) were used to forecast the photocatalytic activity of the samples, and the results were proved by the degradation of methylene blue solution under visible light. Compared with pure TiO{sub 2}, as-prepared Ag modified SnO{sub 2}/TiO{sub 2} nanoparticles exhibited not only an enhanced photocatalytic activity but also an improved stability. Among all of samples, the composite with 0.5% of Ag and 1% of Sn showed the best photocatalytic performance and stability. Further increasing the Ag proportion will result in the decrease of the photocatalytic activity. A relative mechanism was proposed and discussed in detail.

36 MATERIALS SCIENCE↗

Visible light driven photocatalysis and antibacterial activity of AgVO{sub 3} and Ag/AgVO{sub 3} nanowires

Graphical abstract: - Highlights: • Ag/AgVO{sub 3} and pure AgVO{sub 3} nanowires synthesized by sonochemical process. • Characterization done using XRD, SEM, TEM, EDX and BET analysis. • Visible light degradation of RhB by Ag/AgVO{sub 3} within 45 min. • Antibacterial activity of Ag/AgVO{sub 3} demonstrated. - Abstract: Ag/AgVO{sub 3} nanowires and AgVO{sub 3} nanorods were synthesized in aqueous media via a facile sonochemical route. The as-synthesized products were characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, scanning electron microscopy together with an energy dispersion X-ray spectrum analysis, transmission electron microscopy and UV–vis diffuse reflectance spectroscopy. The results revealed that inert atmosphere promotes the formation of Ag/AgVO{sub 3} nanowires. The photocatalytic studies revealed that the Ag/AgVO{sub 3} nanowires exhibited complete photocatalytic degradation of Rhodamine B within 45 min under visible light irradiation. The antibacterial activity of Ag/AgVO{sub 3} nanowires was tested against Escherechia coli and Bacillus subtilis. The minimum growth inhibitory concentration value was found to be 50 and 10 folds lower than for the antibiotic ciprofloxacin for E. coli and B. subtilis, respectively. The antibacterial properties of the β-AgVO{sub 3} nanorods prove that in case of the Ag dispersed Ag/AgVO{sub 3} nanowires, the enhanced antibacterial action is also due to contribution from the AgVO{sub 3} support.

36 MATERIALS SCIENCE↗

Facile fabrication of p-BiOI/n-Zn{sub 2}SnO{sub 4} heterostructures with highly enhanced visible light photocatalytic performances

Highlights: • The BiOI/Zn{sub 2}SnO{sub 4} photocatalysts were prepared by a mild wet chemical method. • The ZB-1/2 (Zn to Bi molar ratio = 1/2) exhibits the best photocatalytic activity. • The enhanced performance results from high separation of photogenerated carriers. - Abstract: New BiOI/Zn{sub 2}SnO{sub 4} p–n heterojunction photocatalysts were prepared by anchoring n-type Zn{sub 2}SnO{sub 4} nanoparticles on p-type BiOI plates. The physicochemical characteristics of the catalysts were studied by X-ray powder diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Ultraviolet visible (UV–vis) diffuse reflectance spectroscopy (DRS), nitrogen adsorption–desorption, and photoelectrochemistry measurement. The as-prepared catalysts exhibited excellent photocatalytic activity for the decomposition of methyl orange (MO) under visible light irradiation. The enhanced photocatalytic performance of BiOI/Zn{sub 2}SnO{sub 4} was not only attributed to the matched band potentials but also the interconnected heterojunction of BiOI and Zn{sub 2}SnO{sub 4} nanoparticles.

36 MATERIALS SCIENCE↗

ZnO polymer composite based visible blind UV photo detector

Highlights: • The spherically shaped ZnO NPs with uniform size (∼40 nm) were synthesized. • Optical and the UV detection properties of polymer composites were measured. • ZnO-PVP sample has the potential as a material for visible blind photo detector. • Dielectric medium perturbs electron-phonon interaction and UV detection mechanism. - Abstract: Spherical ZnO nanoparticles with average diameter ∼50 nm are synthesized by hydrothermal method. Composites of the nanoparticles with different polymers have been prepared and UV detection properties are measured. The dielectric medium perturbs electron-phonon interaction as well as the optoelectronic properties. Moreover, the luminescence properties of the materials effected due to composite formation. In case of NP-polymer composite NPs are capped and there is negligible further adsorption and desorption of O{sub 2} molecules occurred on the surface. This increases the photocurrent as well as photosensitivity. For ZnO based photo detector, there is a small but not negligible photo response near 620 nm. The photo response in this particular wavelength is not observed in case of ZnO-PVP composite and it can be used as visible blind UV detector.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Construction of N-doped TiO2/MoS2 heterojunction with synergistic effect for enhanced visible photodegradation activity

Highlights: • An N-doped TiO{sub 2}/MoS{sub 2} heterojunction is successfully synthesized by a hydrothermal method. • N-doped TiO{sub 2}/MoS{sub 2} heterojunction photocatalyst exhibits enhanced visible photodegradation activity. • The synergistic effect is between N-doping and coupling with MoS{sub 2}. • Superoxide radicals (O{sub 2}{sup −}) and photogenerated holes (h{sup +}) are chiefly responsible for the degradation process. - Abstract: An N-doped TiO{sub 2}/MoS{sub 2} heterojunction photocatalyst constructed by two-dimension MoS{sub 2} nanosheets and N-doped TiO{sub 2} nanoparticles was successfully synthesized by a hydrothermal method. The synthesized N-TiO{sub 2}/MoS{sub 2} composites were characterized by XRD, XPS, TEM, UV–vis DRS and PL, and its visible photocatalytic activity was evaluated by degradation of methylene blue. The results showed that N-doped TiO{sub 2}/MoS{sub 2} heterojunction photocatalyst achieved more enhanced photocatalytic activity compared with pure TiO{sub 2}, MoS{sub 2} and N-doped TiO{sub 2} for degradation of MB. Trapping tests with different scavengers indicated that not hydroxyl radicals (OH) but superoxide radicals (O{sub 2}{sup −}) and photogenerated holes (h{sup +}) were highly responsible for the degradation process. The reusable experiments showed that the prepared N-doped TiO{sub 2}/MoS{sub 2} heterojunction photocatalyst was stable during the photodegradation of MB and will have practical applications for environmental remediation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗