Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Total cross sections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1960

Effect of Afterbody Terminal Fairings on the Performance of a Pylon-Mounted Turbojet-Nacelle Model

An investigation of the effect of afterbody terminal fairings on the performance of a pylon-mounted turbojet-nacelle model has been conducted in the Langley 16-foot transonic tunnel. A basic afterbody having a boattail angle of 16 deg was investigated with and without terminal fairings. The equivalent boattail angle, based on the cross-sectional area of the afterbody and terminal fairings, was 8 deg. Therefore, a simple body of revolution with a boattail angle of 8 deg was included for comparison. The tests were made at an angle of attack of 0 deg, Mach numbers of 0.80 to 1.05, jet total-pressure ratio of 1 to approximately 5, and an average Reynolds number per foot of 4.1 x 10(exp 6). A hydrogen peroxide jet simulator was used to supply the hot-jet exhaust. The results indicate that addition of terminal fairings to a 16 deg boattail afterbody increased the thrust-minus-drag coefficients and provided the lowest effective drag of the three configurations tested.

Willis, Conrad M.↗
NASA NTRS2007

The Artificial Gravity Bed Rest Pilot Project: Effects on Knee Extensor and Plantar Flexor Muscle Groups

The goal of this project was to examine the effects of artificial gravity (2.5 g) on skeletal muscle strength and key anabolic/catabolic markers known to regulate muscle mass. Two groups of subjects were selected for study: 1) a 21 day-bed rest (BR) control (C) group (N=7); and 2) an AG group (N=8), which was exposed to 21 days of bed-rest plus daily 1 hr exposures to AG (2.5 g). This particular experiment was part of an integrated AG Pilot Project sponsored by NASA/Johnson Space Center. The in vivo torque-velocity relationships of the knee extensors and plantar flexors of the ankle were determined pre and post treatment. Also, pre- and post treatment biopsy samples were obtained from both the vastus lateralis and soleus muscles and were used, in part, for a series of analyses on gene expression (mRNA abundance) of key factors implicated in the anabolic versus catabolic state of the muscle. Post/Pre toque-velocity determinations revealed greater decrements in knee extensor performance in the C versus AG group (P less than 0.04). The plantar flexor muscle group of the AG subjects actually demonstrated a net gain in torque-velocity relationship; whereas, in the C group the overall post/pre responses declined (AG vs C; P less than 0.001). Measurements of muscle fiber cross-sectional area (for both muscles) demonstrated a loss of approx. 20% in the C group while no losses were evident in the AG group. RT-PCR analyses of muscle biopsy specimens demonstrated that markers of growth and cytoskeletal integrity (IGF-1, IGF-1 BP4, mechano growth factor, total RNA, and pro-collagen 3a) were higher in the AG group, whereas catabolic markers (myostatin and atrogen) were elevated in the C group. Importantly, these patterns were seen in both muscles. Based on these observations we conclude that paradigms of AG have the potential to maintain the functional, biochemical, and structural homeostasis of skeletal muscle in the face of chronic unloading states. These findings also warrant further studies since it is likely that other robust paradigms of AG that employ various exercise strategies may be more effective in counteracting long duration unloading states as anticipated on the platforms of the Moon and Mars.

Caiozzo, V. J.↗
NASA NTRS1972

Excitation of sodium D-line radiation in collisions of sodium atoms with internally excited H2, D2 and N2.

Excitation of D-line radiation in collisions of Na atoms with vibrationally excited N2, H2, and D2 was studied in two modulated crossed-beam experiments. In both experiments, the molecular excitation was provided by heating the molecular beam to temperatures which were assumed to give populations corresponding to the Boltzmann distribution. In the first experiment, a total rate coefficient was measured as a function of molecular beam temperature. The second experiment achieved partial separation of internal vs kinetic energy transfer effects by using a velocity-selected molecular beam. The data from both experiments were used to determine parameters for the dependence of the transfer cross section upon the kinetic energy for a given change in the vibrational quantum number. Results indicate that most of the Na excitation energy comes from internal vibrational energy, with the remainder coming from kinetic energy.

Krause, H. F.↗
NASA NTRS1974

Some measurements of the attenuation of solar radiation during BOMEX

Measurements of the upward and downward flux of solar radiation in two broad wavelength bands defined by glass filters were made at height between about 300 and 12,000 m in the neighborhood of Barbados during the BOMEX experiment in the summer of 1969. These were examined on selected occasions, apparently cloudless, to determine the attenuation (absorption and upward scattering) that could not be attributed to atmospheric gases and must be considered to be caused by particles. Total particle absorption between the lowest and highest flight levels was found to be of order 5%, and upward scatter of order 1% of the incident radiation. Unexplained attenuation above the highest level was of order 2%. The attenuation attributed to particles was approximately the same magnitude as the geometrical cross section deduced by direct particle sampling on the same flights.

Drummond, A. J.↗
NASA NTRS1976

Single-electron Born approximations for charge transfer from multielectron atoms to protons

The Born approximation, including the internuclear interaction, is used to compute cross sections for the transfer of one electron from a multielectron atom to an incident proton. When the full internuclear interaction is included, the results lie far above high-energy experimental K-shell data for protons and argon. However, when only enough internuclear interaction is included so that the total projectile-target interaction goes to zero asymptotically in accordance with plane-wave functions actually used, fair agreement at high energies is obtained. The latter form of the Born approximation is compared with data on K-shell capture from helium as well as argon and with the simpler approximation of Oppenheimer and of Brinkman and Kramers (OBK), where no internuclear interaction is included. The OBK results typically lie a factor of 2 to 8 above the data, while the present Born results are within a factor of 2 of most of the existing high-velocity K-shell data.

Omidvar, K.↗
NASA NTRS1991

Experimental investigation of turbulent flow through a circular-to-rectangular transition duct

Steady, incompressible, turbulent, swirl-free flow through a circular-to-rectangular transition duck was studied experimentally. The cross-sectional area remains the same at the exit as at the inlet, but varies through the transition section to a maximum value approximately 15 percent above the inlet value. The cross-sectional geometry everywhere along the duct is defined by the equation of a superellipse. Mean and turbulence data were accumulated utilizing pressure and hot-wire instrumentation at five stations along the test section. Data are presented for operating bulk Reynolds numbers of 88,000 and 390,000. Measured quantities include total and static pressure, the three components of the mean velocity vector, and the six components of the Reynolds stress tensor. In addition to the transition duct measurements, a hot-wire technique which relies on the sequential use of single rotatable normal and slant-wire probes was proposed. The technique is applicable for measurement of the total mean velocity vector and the complete Reynolds stress tensor when the primary flow is arbitrarily skewed relative to a plane which lies normal to the probe axis of rotation.

Davis, David O.↗
NASA NTRS1976

Electromagnetic scattering from a spherical polydispersion of coated spheres

The volume averaged cross sections for extinction, scattering, absorption, and radiation pressure along with the elements of the phase matrix were computed for a spherical polydispersion of water coated carbon particles. The wavelength used was 4910 A. The thickness of the water coating was held constant over the polydispersion, while the ratio of core radius to total radius was varied, or the ratio was held constant over the polydispersion, while the thickness of the coating varied. The results show large differences in both the intensity and degree of polarization between dry and wet aerosols. Also interference phenomena can occur, which demonstrate that the assignment of an average refractive index to aerosols can be misleading and can lead to erroneous results.

Kattawar, G. W.↗
NASA NTRS1984

Spectra from pair-equilibrium plasmas

A numerical model of relativistic nonmagnetized plasma with uniform temperature and electron density distributions is considered, and spectra from plasma in pair equilibrium are studied. A range of dimensionless temperature (T) greater than about 0.2 is considered. The spectra from low pair density plasmas in pair equilibrium vary from un-Comptonized bremsstrahlung spectra at Thomson cross section tau(N) much less than one to Comptonized bremsstrahlung spectra with tau(N) over one. For high pair density plasmas the spectra are flat for T greater than about one, and have broad intensity peaks at energy roughly equal to 3T for T less than one. In the latter region the total luminosity is approximately twice the annihilation luminosity. All spectra are flat in the X-ray region, in contradiction to observed AGN spectra. For dimensionless luminosity greater than about 100, the cooling time becomes shorter than the Thomson time.

Zdziarski, A. A.↗
NASA NTRS1987

Calculations of the displacement damage and short-circuit current degradation in proton irradiated (AlGa)As-GaAs solar cells

A theoretical model for computing the displacement damage defect density and the short-circuit current (I sub sc) degradation in proton-irradiated (AlGa)As-GaAs p-n junction solar cells is presented. Assumptions were made with justification that the radiation induced displacement defects form an effective recombination center which controls the electron and hole lifetimes in the junction space charge region and in the n-GaAs active layer of the irradiated GaAs p-n junction cells. The degradation of I sub sc in the (AlGa)As layer was found to be negligible compared to the total degradation. In order to determine the I sub sc degradation, the displacement defect density, path length, range, reduced energy after penetrating a distance x, and the average number of displacements formed by one proton scattering event were first calculated. The I sub sc degradation was calculated by using the electron capture cross section in the p-diffused layer and the hole capture cross section in the n-base layer as well as the wavelength dependent absorption coefficients. Excellent agreement was found between the researchers calculated values and the measured I sub sc in the proton irradiated GaAs solar cells for proton energies of 100 KeV to 10 MeV and fluences from 10 to the 10th power p/square cm to 10 to the 12th power p/square cm.

Yeh, C. S.↗
NASA NTRS1991

Visualization of the freeze/thaw characteristics of a copper/water heat pipe - Effects of non-condensible gas

The freeze/thaw characteristics of a copper/water heat pipe of rectangular cross section were investigated experimentally to determine the effect of variations in the amount of non-condensible gases (NCG) present. The transient internal temperature profiles in both the liquid and vapor channels are presented along with contours of the frozen fluid configuration obtained through visual observation. Several interesting phenomena were observed including total blockage of the vapor channel by a solid plug, evaporator dryout during restart, and freezing blowby. In addition, the restart characteristics are shown to be strongly dependent upon the shutdown procedure used prior to freezing, indicating that accurate prediction of the startup or restart characteristics requires a complete thermal history. Finally, the experimental results indicate that the freeze/thaw characteristics of room temperature heat pipes may be significantly different from those occurring in higher temperature, liquid metal heat pipes due to differences in the vapor pressures in the frozen condition.

Ochterbeck, J. M.↗
NASA NTRS2017

Thermochemistry of Calcium-Magnesium-Aluminum-Silicate (CMAS) and Components of Advanced Thermal and Environmental Barrier Coating Systems

There is increasing interest in the degradation mechanism studies of thermal and environmental barrier coatings (TEBCs) of gas turbines by molten CaO-MgO-Al(exp. 2)O(exp. 3)-SiO(exp. 2) CMAS). CMAS minerals are usually referred as silicon-containing sand dust and volcano ash materials that are carried by the intake air into gas turbines, e.g. in aircraft engines, and their deposits often react at high temperatures (greater than 1200 degrees C) with the engine turbine coating systems and components. The high temperature reactions causes degradation and accelerated failure of the static and rotating components of the turbine engines. We discuss some results of the reactions between the CMAS and Rare-Earth (RE = Y, Yb, Dy, Gd, Nd and Sm) - oxide stabilized ZrO(exp. 2) or HfO(exp. 2) systems, and the stability of the resulting oxides and silicates. Plasma sprayed hollow tube samples (outside diameter = 4.7 mm, wall thickness = 0.76 mm and = 26 mm height) were half filled with CMAS powder, wrapped and sealed with platinum foil, and heat treated at 1310 degrees C for 5h. Samples were characterized by differential scanning calorimetry (DSC), X-ray diffraction, and cross-section electron microscopy analysis and energy dispersive X-ray spectroscopy. It was found that CMAS penetrated the samples at the grain boundaries and dissolved the TEBC materials to form silicate phases containing the rare-earth elements. Furthermore, it was found that apatite crystalline phases were formed in the samples with total rare-earth content higher than 12 mol% in the reaction zone for the ZrO(exp. 2) system. In general, samples with the nominal compositions (30YSZ), HfO(exp. 2)-7Dy(exp. 2)O(exp. 2) and ZrO(exp. 2)-9.5Y(exp. 2)O(exp. 3)-2.25Gd(exp. 2)O(exp. 3)-2.25Yb(exp. 2)O(exp. 3) exhibited lower reactivity or more resistance to CMAS than the other coating compositions of this work.

degradation↗
NASA NTRS1990

Study and prototype of data system interactions for the Earth Observing System Data and Information System

A crucial part of the Earth Observing System (EOS) is its Data and Information System (EOSDIS). The success of EOS depends not only on its instruments and science studies, but also on its ability to help scientists integrate data sets of geophysical and biological measurements taken by various instruments and investigators. NASA contractors have completed Phase B studies of EOSDIS, in particular its architecture, functionality, and user interfacing. At this point in time, it may seem impossible to exercise the EOSDIS or any of its components since they do not exist; i.e., if the EOSDIS is accepted as a totally new system, distinct from any existing DIS. However, if EOSDIS is seen as evolving from existing data systems, then some limited prototyping studies can be conducted by using currently functioning systems. In support of both the EOSDIS Science Advisory Panel and the EOSDIS Project, a prototyping activity was carried out by a cross section of interdisciplinary scientists. That prototyping activity is summarized and some conclusions are drawn that can be used by NASA-Goddard to evaluate and modify the specifications soon to be released in an RFP to build EOSDIS.

Emmitt, G. D.↗
NASA NTRS2008

Synchrotron Photoionization Mass Spectrometry Measurements of Kinetics and Product Formation in the Allyl Radical (H2CCHCH2)Self Reaction

Product channels for the self-reaction of the resonance-stabilized allyl radical, C3H5 + C3H5, have been studied with isomeric specificity at temperatures from 300-600 K and pressures from 1-6 Torr using time-resolved multiplexed photoionization mass spectrometry. Under these conditions 1,5-hexadiene was the only C6H10 product isomer detected. The lack of isomerization of the C6H10 product is in marked contrast to the C6H6 product in the related C3H3 + C3H3 reaction, and is due to the more saturated electronic structure of the C6H10 system. The disproportionation product channel, yielding allene + propene, was also detected, with an upper limit on the branching fraction relative to recombination of 0.03. Analysis of the allyl radical decay at 298 K yielded a total rate coefficient of (2.7 +/- 0.8) x 10(exp -11) cu cm/molecule/s, in good agreement with pre.vious experimental measurements using ultraviolet kinetic absorption spectroscopy and a recent theoretical determination using variable reaction coordinate transition state theory. This result provides independent indirect support for the literature value of the allyl radical ultraviolet absorption cross-section near 223 nm.

Selby, Talitha M.↗
NASA NTRS1978

An interpretation of special and general isotopic anomalies in r-process nuclei

My analysis of new discoveries by McCulloch and Wasserburg of Ba and Nd isotopic anomalies in inclusions of the Allende meteorite argues that (1) these anomalies contain special extinct radioactivities resulting from radioactive decay within grains formed in and ejected from the supernova interior, (2) the inclusions studied are fused assemblies of interstellar grains that were never totally vaporized, and (3) theoretical separation into r and s abundances suggests that fluctuations between r and s components has occurred during the accumulation processes. These points lend support to a new chemical picture of the early solar system that I have developed, although many interpretations remain possible. Measurements of the neutron-capture cross sections of Nd isotopes are urgently needed to experimentally validate these conclusions.

Clayton, D. D.↗
NASA NTRS2001

Balance Mass Flux and Velocity Across the Equilibrium Line in Ice Drainage Systems of Greenland

Estimates of balance mass flux and the depth-averaged ice velocity through the cross-section aligned with the equilibrium line are produced for each of six drainage systems in Greenland. (The equilibrium line, which lies at approximately 1200 m elevation on the ice sheet, is the boundary between the area of net snow accumulation at higher elevations and the areas of net melting at lower elevations around the ice sheet.) Ice drainage divides and six major drainage systems are delineated using surface topography from ERS (European Remote Sensing) radar altimeter data. The net accumulation rate in the accumulation zone bounded by the equilibrium line is 399 Gt/yr and net ablation rate in the remaining area is 231 Gt/yr. (1 GigaTon of ice is 1090 kM(exp 3). The mean balance mass flux and depth-averaged ice velocity at the cross-section aligned with the modeled equilibrium line are 0.1011 Gt kM(exp -2)/yr and 0.111 km/yr, respectively, with little variation in these values from system to system. The ratio of the ice mass above the equilibrium line to the rate of mass output implies an effective exchange time of approximately 6000 years for total mass exchange. The range of exchange times, from a low of 3 ka in the SE drainage system to 14 ka in the NE, suggests a rank as to which regions of the ice sheet may respond more rapidly to climate fluctuations.

Zwally, H. Jay↗
NASA NTRS1997

Scale Model Icing Research Tunnel

NASA Lewis Research Center's Icing Research Tunnel (IRT) is the world's largest refrigerated wind tunnel and one of only three icing wind tunnel facilities in the United States. The IRT was constructed in the 1940's and has been operated continually since it was built. In this facility, natural icing conditions are duplicated to test the effects of inflight icing on actual aircraft components as well as on models of airplanes and helicopters. IRT tests have been used successfully to reduce flight test hours for the certification of ice-detection instrumentation and ice protection systems. To ensure that the IRT will remain the world's premier icing facility well into the next century, Lewis is making some renovations and is planning others. These improvements include modernizing the control room, replacing the fan blades with new ones to increase the test section maximum velocity to 430 mph, installing new spray bars to increase the size and uniformity of the artificial icing cloud, and replacing the facility heat exchanger. Most of the improvements will have a first-order effect on the IRT's airflow quality. To help us understand these effects and evaluate potential improvements to the flow characteristics of the IRT, we built a modular 1/10th-scale aerodynamic model of the facility. This closed-loop scale-model pilot tunnel was fabricated onsite in the various shops of Lewis' Fabrication Support Division. The tunnel's rectangular sections are composed of acrylic walls supported by an aluminum angle framework. Its turning vanes are made of tubing machined to the contour of the IRT turning vanes. The fan leg of the tunnel, which transitions from rectangular to circular and back to rectangular cross sections, is fabricated of fiberglass sections. The contraction section of the tunnel is constructed from sheet aluminum. A 12-bladed aluminum fan is coupled to a turbine powered by high-pressure air capable of driving the maximum test section velocity to 550 ft/sec (Mach 0.45). The air turbine and instrumentation are housed inside a fiberglass nacelle. Total and static pressure measurements can be taken around the loop, and velocity and flow angularity measurements can be taken with hot-wire and five-hole probes at specific locations. The Scale Model Icing Research Tunnel (SMIRT) is undergoing checkout tests to determine how its airflow characteristics compare with the IRT. Near-term uses for this scale-model tunnel include determining the aerodynamic effects of replacing the 52-yearold W-shaped heat exchanger with a flat-faced heat exchanger. SMIRT is an integral part of the improvements planned for the IRT because testing the proposed IRT improvements in a scale-model tunnel will lower costs and improve productivity.

Canacci, Victor A.↗
NASA NTRS2018

Small-Scale Flux Transfer Events Formed in the Reconnection Exhaust Region Between Two X Lines

We report MMS observations of the ion-scale flux transfer events (FTEs) that may involve two main X lines and tearing instability between the two X lines. The four spacecraft detected multiple isolated regions with enhanced magnetic field strength and bipolar B(sub )n signatures normal to the nominal magnetopause, indicating FTEs. The currents within the FTEs flow mostly parallel to B, and the magnetic tension force is balanced by the total pressure gradient force. During these events, the plasma bulk flow velocity was directed southward. Detailed analysis of the magnetic and electric field and plasma moments variations suggests that the FTEs were initially embedded within the exhaust region north of an X line but were later located southward/downstream of a subsequent X line. The cross sections of the individual FTEs are in the range of ~2.5-6.8 ion inertial lengths. The observations suggest the formation of multiple secondary FTEs. The presence of an X line in the exhaust region southward of a second X line results from the southward drift of an old X line and the reformation of a new X line. The current layer between the two X lines is unstable to the tearing instability, generating multiple ion-scale flux-rope-type secondary islands.

Hwang, K.-J.↗
NASA NTRS1992

Loss of Prostaglandin E2-induced Extra Cortical Bone After its Withdrawal in Rats

The object of this study was to determine the fate of PGE2-(Prostaglandin E2) induced new cortical bone mass after withdrawal of PGE2 administration. Seven-month-old male Sprague-Dawley rats were given subcutaneous injections of 1, 3 and 6 mg PGE2/kg/day for 60 days and then withdrawn for 60 and 120 days (on/off treatment). Histomorphometric analyses were performed on double-fluorescent-labeled undecalcified tibial shaft sections (proximal to the tibiofibular junction). In a previous report we showed that after 60, 120 and 180 days of daily PGE2 (on)treatment, a new steady state was achieved marked by increased total bone area (+16%, +25% and +34% with 1, 3 and 6 mg PGE2/kg/day) when compared to age-matched controls. The continuous PGE2 treatment stimulated periosteal and endocortical lamellar bone formation, activated endocortical woven trabecular bone formation and intracortical bone resorption. These responses increased cortical bone mass since the bone formation exceeded bone resorption. The current study showed that after withdrawal of PGE2 for 60 and 120 days, the extra endocortical bone, which was induced by the first 60-days treatment, was resorbed, but the new subperiosteal bone persisted resulting in a tibial shaft with larger cross sectional and marrow areas. Despite that, there was still the same amount of bone mass in these shafts as in age-related controls. A new steady state was achieved after 60 days of withdrawal, in which the bone mass and bone formation activity approximated that of age-related controls. It was concluded that maintaining the extra PGE2-induced cortical bone mass depends on continuous daily administration of PGE2.

Jee, Webster S. S.↗