Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Advances in refrigeration and heat transfer engineering

This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO 2 may perhaps have been the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Efficient prediction of time- and angle-resolved photoemission spectroscopy measurements on a nonequilibrium BCS superconductor

We study how time- and angle-resolved photoemission (tr-ARPES) reveals the dynamics of BCS-type, s -wave superconducting systems with time-varying order parameters. Approximate methods are discussed, based on previous approaches to either optical conductivity or quantum dot transport, to enable computationally efficient prediction of photoemission spectra. One use of such predictions is to enable extraction of the underlying order parameter dynamics from experimental data, which is topical given the rapidly growing use of tr-ARPES in studying unconventional superconductivity. The methods considered model the two-time lesser Green's functions with an approximated lesser self-energy that describes relaxation by coupling of the system to two types of baths. The approach primarily used here also takes into consideration the relaxation of the excited states into equilibrium by explicitly including the level-broadening of the retarded and advanced Green's functions. Here, we present equilibrium and nonequilibrium calculations of tr-ARPES spectrum from our model and discuss the signatures of different types of superconducting dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Mass of 101 Sn and Bayesian extrapolations to the proton drip line

The favorable energy configurations of nuclei at magic numbers of 𝑁 neutrons and 𝑍 protons are fundamental for understanding the evolution of nuclear structure. The 𝑍 = 50 (tin) isotopic chain is a frontier for such studies, with particular interest at and around the doubly magic 100 Sn isotope, for which the mass is a topic of debate. Precise mass values for neutron-deficient isotopes provide necessary anchor points for mass models to test extrapolations near the proton drip line, where experimental studies remain out of reach. In this work, we report a Penning trap mass measurement of 101 Sn . The determined mass excess of −59889.89⁢(96) keV for 101 Sn represents a factor-of-300 improvement over the current precision and indicates that 101 Sn is less bound than previously thought. Mass predictions from a recently developed Bayesian model combination framework employing statistical machine learning and nuclear masses computed within seven global models based on nuclear density functional theory agree within 1⁢𝜎 with experimental masses from the 48 ≤ 𝑍 ≤ 52 isotopic chains. The framework's resilience to new mass data gave confidence in the extrapolation of tin masses down to 𝑁 = 46. Our calculations suggest that 96 Sn is a two-proton drip line nucleus and predict a mass excess of −58090⁢(800) keV for 100 Sn , showing a preference within 1⁢𝜎 for the mass of 100 Sn derived from the 𝛽-delayed 𝑄 value measured at GSI.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

Agriculture and Climate Change in Global Scenarios: Why Don't the Models Agree

Agriculture is unique among economic sectors in the nature of impacts from climate change. The production activity that transforms inputs into agricultural outputs makes direct use of weather inputs. Previous studies of the impacts of climate change on agriculture have reported substantial differences in outcomes of key variables such as prices, production, and trade. These divergent outcomes arise from differences in model inputs and model specification. The goal of this paper is to review climate change results and underlying determinants from a model comparison exercise with 10 of the leading global economic models that include significant representation of agriculture. By providing common productivity drivers that include climate change effects, differences in model outcomes are reduced. All models show higher prices in 2050 because of negative productivity shocks from climate change. The magnitude of the price increases, and the adaptation responses, differ significantly across the various models. Substantial differences exist in the structural parameters affecting demand, area, and yield, and should be a topic for future research.

Nelson, Gerald↗
DOE OSTI2011

Rapid Exploitation and Analysis of Documents

Analysts are overwhelmed with information. They have large archives of historical data, both structured and unstructured, and continuous streams of relevant messages and documents that they need to match to current tasks, digest, and incorporate into their analysis. The purpose of the READ project is to develop technologies to make it easier to catalog, classify, and locate relevant information. We approached this task from multiple angles. First, we tackle the issue of processing large quantities of information in reasonable time. Second, we provide mechanisms that allow users to customize their queries based on latent topics exposed from corpus statistics. Third, we assist users in organizing query results, adding localized expert structure over results. Forth, we use word sense disambiguation techniques to increase the precision of matching user generated keyword lists with terms and concepts in the corpus. Fifth, we enhance co-occurrence statistics with latent topic attribution, to aid entity relationship discovery. Finally we quantitatively analyze the quality of three popular latent modeling techniques to examine under which circumstances each is useful.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2012

The Structure of Jets at Hadron Colliders

Particle physics seeks to understand the interactions and properties of the fundamental particles. To gain understanding, there is an interplay between theory and experiment. Models are proposed to explain how particles behave and interact. These models make precise predictions that can be tested. Experiments are built and executed to measure the properties of these particles, providing necessary tests for the theories that attempt to explain the realm of fundamental particles. However, there is also another level of interaction between theory and experiment; the development of new experiments demands the study of how particles will behave with respect to the measured observables toward the goal of understanding the details and idiosyncrasies of the measurements very well. Only once these are well-modeled and understood can one be con dent that the data that are measured is trustworthy. The modeling and interpretation of the physics of a proton collider, such as the LHC, is the main topic of this thesis.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

HEP Software Foundation Community White Paper Working Group - Detector Simulation

A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Basic Mechanisms: Displacement Damage [Slides]

This report contains a set of slides intended for the 2019 Los Alamos National Laboratory (LANL) radiation effects summer school. On the topic of the basic mechanisms of displacement damage, this presentation discusses the consequences, physical mechanisms, electrical degradation, modeling displacement damage, and current research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Editorial: Quantum Information and Quantum Computing for Chemical Systems

Quantum computing has emerged as an exciting inter-disciplinary research topic that cuts across the traditional fields of physics, computer science, and engineering. It is a revolutionary model of computation that has offered new insights into methods for modeling and simulation of chemical systems. Applications of quantum computing to chemistry have demonstrated rapid progress on both theoretical and experimental fronts. Past theoretical efforts have shown how to adapt quantum computation to a variety of problems including electronic structure and molecular dynamics. In addition, the development of quantum algorithms for quantum chemistry has been stimulated by the greater availability of more capable quantum computing devices. Advances in the number and quality of qubits continues to enable remarkable proof-of-concept demonstrations working towards a milestone of quantum computational advantage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Editorial: Advances in observations and modeling of snow, forest-snow processes and snow hydrology

Seasonal snowpack plays a pivotal role in the regional water cycle. In Western mountainous regions, where precipitation predominantly occurs as snow during winter and is limited in the summer months when water demand peaks, snowpack serves as a critical water source essential for sustaining water supply, ecosystems, agriculture, and industries. Additionally, snowpack dynamically influences extreme events, such as floods, droughts, and wildfires, through intricate land-atmosphere feedback. Nevertheless, significant knowledge gaps persist within this field due to data limitations and the complexity of the physics involved in modeling snow and snow hydrology (i.e., snow acts as a critical upstream hydrological process). Here, this research topic presents a collection of manuscripts that address some of these important research gaps.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Deep Learning for Scientific Discovery

Deep learning has positively impacted fields were perceptive tasks are paramount, such as computer vision and natural language processing. Tremendous strides have also been made in deep reinforcement learning towards robotics and gaming. Given the success in these fields, it is apparent that deep learning may also accelerate scientific discovery. Herein, we discuss several topic areas where modern representation learning is driving innovation. This article presents a) learning non-linear models from data, b) learning scientific laws from models, c) deep learning on graphs, and d) approaches to scalable deep learning.

deep learning, scientific computing, koopman, mate↗
DOE OSTI2015

Extreme Spectroscopy: In situ nuclear materials behavior from optical data

In the nuclear industry, materials are regularly exposed to high temperature or/and irradiation and a better knowledge and understanding of their behavior under such extreme conditions is a key-point for improvements and further developments. Nowadays, Raman spectroscopy begins to be well known as a promising technique in the post mortem and remote characterization of nuclear materials exposed to extreme conditions. On this topic, at ANIMMA 2013 conference, we have presented some results about its implementation in the study of model or real nuclear fuel. However, the strength of Raman spectroscopy as in situ characterization tool is mainly its ability to be implemented remotely through optical fibers. Aware of this, implementation of other optical techniques can be considered in order to gain information not only on the structural dynamics of materials but also on the electronic charge carrier populations. In this paper, we propose to present our last advances in Raman characterization of nuclear materials and enlarge to the in situ use of complementary optical spectroscopies. Emphasis will be made on the information that can be gained to the behavior of the model fuel depleted UO{sub 2} under extreme conditions of high temperature and ionic irradiation: - In Situ Raman identification of the radiolysis alteration products of UO{sub 2} in contact with water under ionic irradiation. - In Situ Raman recording of the damaged dynamic of UO{sub 2} under inert atmosphere. - In Situ Raman and photo-luminescence study of virgin and damaged UO2 at high temperature. - In Situ study of electronic charge carriers' behavior in U{sub x}Th{sub 1-x}O{sub 2} solid solutions by mean of Iono- and Thermo- luminescence under and post- ionic irradiation. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2016

Simulations of a Helical Tube Bundle in Cross-Flow for Application to Flow-Induced Vibration

Helical tubes have been used in a number of systems, including the energy and chemical processing industries. Helical-Coil Steam Generators (HCSGs) in particular have special application in systems for which spatial constraints are important. Variants of these designs are notably included in a number of integral-vessel small modular reactor (SMR) designs which are currently in development by multiple companies. These designs typically have the primary side located within the vessel, with the secondary side flowing upward through the helical tubes. One complexity in implementing an HCSG within the reactor pressure vessel is that any potential flow-induced vibration (FIV) can impact reactor safety. In a typical power plant, heat exchanger tube failures caused by FIV can be costly, but generally do not have immediate impact on the core safety due to their relative isolation from the core area. In an integral-vessel design, a tube rupture could eject material from the secondary side into the primary flow, potentially damaging the core itself or other crucial components. Thus a higher degree of confidence in predicting and/or preventing FIV should be attained for implementing the helical tubes in these designs. A significant campaign is currently underway to address the topic of FIV in helical tube arrays. The U.S. Department of Energy, under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) initiative, has deemed this a 'high-impact problem'. This will include both experimental and computational contributions from a consortium consisting of multiple universities, industry partners, and national laboratories, including Argonne National Laboratory. The primary industrial partner is NuScale, which will see direct benefits from this initiative to the development of their SMR and its component design. The primary focus of this paper is to establish some of the computational efforts that have been made to this stage and the initial benchmarking of computational tools. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2015

Collaborative Research: Process-resolving Decomposition of the Global Temperature Response to Modes of Low Frequency Variability in a Changing Climate

El Niño-Southern Oscillation (ENSO) and Annular Modes (AMs) represent respectively the most important modes of low frequency variability in the tropical and extratropical circulations. The future projection of the ENSO and AM variability, however, remains highly uncertain with the state-of-the-art coupled general circulation models. A comprehensive understanding of the factors responsible for the inter-model discrepancies in projecting future changes in the ENSO and AM variability, in terms of multiple feedback processes involved, has yet to be achieved. The proposed research aims to identify sources of such uncertainty and establish a set of process-resolving quantitative evaluations of the existing predictions of the future ENSO and AM variability. The proposed process-resolving evaluations are based on a feedback analysis method formulated in Lu and Cai (2009), which is capable of partitioning 3D temperature anomalies/perturbations into components linked to 1) radiation-related thermodynamic processes such as cloud and water vapor feedbacks, 2) local dynamical processes including convection and turbulent/diffusive energy transfer and 3) non-local dynamical processes such as the horizontal energy transport in the oceans and atmosphere. Taking advantage of the high-resolution, multi-model ensemble products from the Coupled Model Intercomparison Project Phase 5 (CMIP5) soon to be available at the Lawrence Livermore National Lab, we will conduct a process-resolving decomposition of the global three-dimensional (3D) temperature (including SST) response to the ENSO and AM variability in the preindustrial, historical and future climate simulated by these models. Specific research tasks include 1) identifying the model-observation discrepancies in the global temperature response to ENSO and AM variability and attributing such discrepancies to specific feedback processes, 2) delineating the influence of anthropogenic radiative forcing on the key feedback processes operating on ENSO and AM variability and quantifying their relative contributions to the changes in the temperature anomalies associated with different phases of ENSO and AMs, and 3) investigating the linkages between model feedback processes that lead to inter-model differences in time-mean temperature projection and model feedback processes that cause inter-model differences in the simulated ENSO and AM temperature response. Through a thorough model-observation and inter-model comparison of the multiple energetic processes associated with ENSO and AM variability, the proposed research serves to identify key uncertainties in model representation of ENSO and AM variability, and investigate how the model uncertainty in predicting time-mean response is related to the uncertainty in predicting response of the low-frequency modes. The proposal is thus a direct response to the first topical area of the solicitation: Interaction of Climate Change and Low Frequency Modes of Natural Climate Variability. It ultimately supports the accomplishment of the BER climate science activity Long Term Measure (LTM): "Deliver improved scientific data and models about the potential response of the Earth's climate and terrestrial biosphere to increased greenhouse gas levels for policy makers to determine safe levels of greenhouse gases in the atmosphere."

58 GEOSCIENCES↗
DOE OSTI2015

Effectiveness of the food recovery at the retailing stage under shelf life uncertainty: An application to Italian food chains

Highlights: • The food recovery is seen as suitable way to manage food near to its expiry date. • The variability of the products shelf life must be taken into account. • The paper addresses the mathematic modeling of the profit related to food recovery. • The optimal time to withdraw the products is determinant for food recovery. - Abstract: Food losses represent a significant issue affecting food supply chains. The possibility of recovering such products can be seen as an effective way to reduce such a phenomenon, improve supply chain performances and ameliorate the conditions of undernourished people. The topic has been already investigated by a previous paper enforcing the hypothesis of deterministic and constant Shelf Life (SL) of products. However, such a model cannot be properly extended to products affected by uncertainties of the SL as it does not take into account the deterioration costs and loss of profits due to the overcoming of the SL within the cycle time. Thus the present paper presents an extension of the previous one under stochastic conditions of the food quality. Differently from the previous publication, this work represents a general model applicable to all supply chains, especially to those managing fresh products characterized by uncertain SL such as fruits and vegetables. The deterioration costs and loss of profits are included in the model and the optimal time at which to withdraw the products from the shelves as well as the quantities to be shipped at each alternative destination have been determined. A comparison of the proposed model with that reported in the previous publication has been carried out in order to underline the impact of the SL variability on the optimality conditions. The results show that the food recovery strategy in the presence of uncertainty of the food quality is rewarding, even if the optimal profit is lower than that of the deterministic case.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Progress in Accurate Chemical Kinetic Modeling, Simulations, and Parameter Estimation for Heterogeneous Catalysis

Chemical kinetic modeling in heterogeneous catalysis is gaining ground in its ability to provide qualitatively or even quantitatively accurate prediction of real-world behavior because of new advances in the physical and chemical representations of catalytic systems, estimation of relevant kinetic parameters, and capabilities in kinetic modeling. This Perspective chronicles current trends and future areas of advancement in chemical kinetic modeling, simulation, and parameter estimation: ranging from elementary step calculations to multiscale modeling to the role of advanced statistical methods for incorporating uncertainties in predictions. Multiple new or growing methodologies are covered, examples are provided, and forward-looking topics for advancement are noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modeling of Peptides with Classical and Novel Machine Learning Force Fields: A Comparison

The replacement of classical force fields (FFs) with novel neural-network-based frameworks is an emergent topic in molecular dynamics (MD) simulations. In contrast to classical FFs, which have proven their capability to provide insights into complex soft matter systems at an atomistic resolution, the machine learning (ML) potentials have yet to demonstrate their applicability for soft materials. However, the underlying philosophy, which is learning the energy of an atom in its surrounding chemical environment, makes this approach a promising tool. In particular for the exploration of novel chemical compounds, which have not been considered in the original parametrization of classical FFs. In this article, we study the performance of the ANI-2x ML model and compare the results with those of two classical FFs, namely, CHARMM27 and the GROMOS96 43a1 FF. We explore the performance of these FFs for bulk water and two model peptides, trialanine and a 9-mer of the α-aminoisobutyric acid, in vacuum and water. The results for water describe a highly ordered water structure, with a structure similar to those using ab initio molecular dynamics simulations. The energy landscape of the peptides described by Ramachandran maps show secondary structure basins similar to those of the classical FFs but differ in the position and relative stability of the basins. Details of the sampled structures show a divergent performance of the different models, which can be related either to the short-ranged nature of the ML potentials or to shortcomings of the underlying data set used for training. These findings highlight the current state of the applicability of ANI-2x ML potential for MD simulations of soft matter systems. Simultaneously, they provide insights for future improvements of current ML potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Outcomes of the DOE Workshop on Atmospheric Challenges for the Wind Energy Industry

The U.S. Department of Energy-funded Mesoscale-to-Microscale Coupling (MMC) project team planned and conducted a virtual Workshop on Atmospheric Challenges for the Wind Energy Industry on October 19 and 20, 2020. The goal of the workshop was to forge a dialog with the community, including industry representatives, on how modeling tools are currently being used, the present active atmospheric modeling research in support of wind energy, and required advancements in capabilities and technology to continue to advance wind energy deployment. The workshop was planned in collaboration with an industry advisory panel that included representatives from wind power plant developers, turbine manufacturers, and companies that provide resource assessment and forecasting services. The format of the workshop included panels from government research sponsors, visionaries from industry, and mixed panels of researchers discussing research status and needs. A shared keynote presentation from the Technical University of Denmark experts anchored the second day of the workshop. An emphasis was placed on understanding the research needs in the offshore environment. In addition, breakout opportunities were provided each day. On the first day, the breakout discussions addressed predesigned questions configured to elicit participants’ thoughts on needed research directions. The second-day breakouts treated three important technical topics through a combination of presentations and group conversations. Each workshop participant chose their breakout preference from among downscaling details, modeling for turbines, and using artificial intelligence for atmospheric modeling. The discussions were robust and productive. The outcomes of the workshop include archiving a series of recommendations from industry and the research community on research directions required to further advance wind energy deployment. Discussions confirmed the need for high-fidelity modeling but that there are specific areas of applicability and other areas where the time and cost of computation is prohibitive. In those cases, the high-fidelity models can inform low-order models that are more practical for real-time or widely deployed applications. Industry must consider the financial cost of performing more expensive modeling approaches, but industry engineers and researchers are using these approaches where there appears to be a return on investment. An emerging type of low-order model is based on machine learning (ML). Participants confirmed that there are many atmospheric phenomena that need to be modeled better, including low-level jets, cold air outbreaks, land-sea induced circulations, diurnal variability, thin stable boundary layers, dynamic changes such as from frontal passage, interaction of wakes and blockage, and more. For the offshore environment, there is wide agreement that some level of ocean-wave-atmospheric coupling is necessary to capture variations in rotor-level winds needed to plan and operate offshore wind plants. Another recurring recommendation is that more observations are needed, particularly for the offshore environment. Those observations should consider the needs for model improvement, both for physically based models and for ML models. Observations must capture atmospheric profiles of variables that are important to understanding and modeling atmospheric and oceanic phenomena that impact boundary layer winds. Models must be validated with data and the uncertainty quantified, particularly those that are sensitive to initial and boundary conditions. Finally, a repeated request was to consider the holistic needs of hybrid plants of wind, solar, and storage resources because those types of plants are likely to be the wave of the future. In addition, industry wishes to understand impacts of the resource under a changing climate for long-term planning.

17 WIND ENERGY↗