Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Dilatometric Investigation of Titanium

High temperature vacuum dilatometric investigation of linear expansion coefficient of metallic titanium and sintering kinetics of compressed titanium powder

POWDERED METAL↗

Viscoelastic Response of the Titanium Alloy Ti-6-4: Experimental Identification of Time- and Rate-Dependent Reversible and Irreversible Deformation Regions

In support of an effort on damage prognosis, the viscoelastic behavior of Ti-6Al-4V (Ti-6-4) was investigated. This report documents the experimental characterization of this titanium alloy. Various uniaxial tests were conducted to low load levels over the temperature range of 20 to 538 C to define tensile, creep, and relaxation behavior. A range of strain rates (6x10(exp -7) to 0.001/s) were used to document rate effects. All tests were designed to include an unloading portion, followed by a hold time at temperature to allow recovery to occur either at zero stress or strain. The titanium alloy was found to exhibit viscoelastic behavior below the "yield" point and over the entire range of temperatures (although at lower temperatures the magnitude is extremely small). These experimental data will be used for future characterization of a viscoelastic model.

stress relaxation↗

A Closer Look at a Stronger Titanium

An improved titanium alloy – stronger than any commercial titanium alloy currently on the market – gets its strength from the novel way atoms are arranged to form a special nanostructure. For the first time, researchers at Pacific Northwest National Laboratory have been able to see this alignment and then manipulate it to make it even stronger. Using powerful electron microscopes and a unique atom probe imaging approach at EMSL, the Environmental Molecular Sciences Laboratory, a DOE Office of Science User Facility located at PNNL, they were able to peer deep inside the alloy’s nanostructure to see what was happening.

36 MATERIALS SCIENCE↗

Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Titanium Manufacturing

Energy bandwidth studies can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities in U.S. manufacturing. This bandwidth study is one of a series of six energy bandwidth studies on lightweight structural materials manufacturing. The study examines energy consumption and potential energy savings opportunities in U.S. titanium manufacturing. The study relies on multiple sources to estimate the energy used in the manufacturing of the lightweight material for four application areas (automotive, wind energy, aerospace, and pressure vessels), accounting for approximately 75% of overall U.S. titanium production in 2010. Energy savings opportunities for the three manufacturing subareas studied are based on technologies currently in use or under development.

energy bandwidth study, titanium, advanced manufac↗

Titanium and Aluminum Rod-Replacement Experiments in Fully-Reflected 6.90% Enriched UO{sub 2} Fuel Rod Lattices

The Seven Percent Critical Experiment (7uPCX) was designed to provide benchmark criticality and reactor physics data for water-moderated pin-fueled nuclear reactor cores. The enrichment of the fuel was chosen to explore the enrichment range above the current 5% ceiling for US commercial pressurized water reactors. The experiment was part of the US Department of Energy (DOE) Nuclear Energy Research Initiative Project 01-124 titled 'Reactor Physics and Criticality Benchmark Evaluations for Advanced Nuclear Fuel'. Three sets of benchmark experiments have been completed using the 7uPCX and documented as LEUCOMP-THERM-080, LEU-COMP-THERM-078, and LEUCOMP-THERM-096. The experiments for LEUCOMP-THERM-080 and LEU-COMP-THERM-078 were done in fully-reflected arrays with the number of fuel rods in the array as the approach parameter. The experiments for LEU-COMP-THERM-096 are similar to those in LEUCOMP-THERM-080 except that the arrays are partially-reflected - the arrays were larger than would be possible with full reflection and the approach-to-critical experiments were done with the depth of the water in the critical assembly as the approach parameter. The experiments described here are similar to the fully-reflected experiments in LEU-COMP-THERM-080 with some of the central fuel rods in the array replaced by titanium rods, aluminum rods, and/or water. The experiments are designed to provide criticality safety benchmarks with significant reactivity from titanium and equivalent configurations with aluminum experiment rods. These experiments are documented as LEU-COMP-THERM-097. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Superfluid helium testing of a stainless steel to titanium piping transition joint

Stainless steel-to-titanium bimetallic transitions have been fabricated with an explosively bonded joint. This novel joining technique was conducted by the Russian Federal Nuclear Center, working under contract for the Joint Institute for Nuclear Research. These bimetallic transitions are being considered for use in future superconducting radio-frequency cavity cryomodule assemblies. This application requires cryogenic testing to demonstrate that this transition joint remains leak-tight when sealing superfluid helium. To simulate a titanium cavity vessel connection to a stainless steel service pipe, bimetallic transition joints were paired together to fabricate piping assemblies. These piping assemblies were then tested in superfluid helium conditions at Fermi National Accelerator Laboratory test facilities. The transition joint test program will be described. Fabrication experience and test results will be presented.

43 PARTICLE ACCELERATORS↗

NEW TITANIUM ISOTOPE DATA FOR ALLENDE AND EFREMOVKA CAIs

We measured the titanium (Ti) isotope composition, i.e., {sup 50}Ti/{sup 47}Ti, {sup 48}Ti/{sup 47}Ti, and {sup 46}Ti/{sup 47}Ti, in five calcium-rich-aluminum-rich refractory inclusions (CAIs) from the oxidized CV3 chondrite Allende and in two CAIs from the reduced CV3 chondrite Efremovka. Our data indicate that CAIs are enriched in {sup 50}Ti/{sup 47}Ti and {sup 46}Ti/{sup 47}Ti and are slightly depleted in {sup 48}Ti/{sup 47}Ti compared to normal Ti defined by ordinary chondrites, eucrites, ureilites, mesosiderites, Earth, Moon, and Mars. Some CAIs have an additional {sup 50}Ti excess of {approx}8{epsilon} relative to bulk carbonaceous chondrites, which are enriched in {sup 50}Ti by {approx}2{epsilon} relative to terrestrial values, leading to a total excess of {approx}10{epsilon}. This additional {sup 50}Ti excess is correlated with nucleosynthetic anomalies found in {sup 62}Ni and {sup 96}Zr, all indicating an origin from a neutron-rich stellar source. Bulk carbonaceous chondrites show a similar trend, however, the extent of the anomalies is either less than or similar to the smallest anomalies seen in CAIs. Mass balance calculations suggest that bulk Allende Ti possibly consists of a mixture of at least two Ti components, anomalous Ti located in CAIs and a normal component possibly for matrix and chondrules. This argues for a heterogeneous distribution of Ti isotopes in the solar system. The finding that anomalous Ti is concentrated in CAIs suggests that CAIs formed in a specific region of the solar system and were, after their formation, not homogeneously redistributed within the solar system. Combining the CAI data with improved model predictions for early solar system irradiation effects indicates that a local production scenario for the relatively short lived radionuclides can be excluded, because the production of, e.g., {sup 10}Be, {sup 26}Al, and {sup 41}Ca, would result in a significant collateral shift in Ti isotopes, which is not seen in the measured data.

79 ASTRONOMY AND ASTROPHYSICS↗

Changing the physical and chemical properties of titanium oxynitrides TiN{sub 1-x}O{sub x} by changing the composition

The stability and structural properties of titanium oxynitrides, TiN{sub 1-x}O{sub x}, of different compositions are theoretically analyzed by means of first-principles periodic density-functional calculations. We show that at x=0.55-0.6 there is a change in the preferred structure from that of NaCl type to the {alpha}-TiO arrangement. For the NaCl-type structure the cell volume increases with x while it decreases with x for the {alpha}-TiO structure. The bulk moduli are always much larger for NaCl-type structures than for {alpha}-TiO and they decrease as the amount of O increases, moving from 280 GPa for TiN to 226 GPa for TiO (NaCl-type structure) or 197 GPa for {alpha}-TiO. Changes in the electronic structure with the composition are also considered. In general we found that in the two types of structure (NaCl and {alpha}-TiO), both the band gap and the ionic character increase with the O concentration.

36 MATERIALS SCIENCE↗

Titanium Imido Complexes by Displacement of –SiMe 3 and C–H Bond Activation in a Ti III Amido Complex, Promoted by a Cyclic (Alkyl)(Amino) Carbene (cAAC)

A strong σ‐donating cyclic (alkyl)(amino) carbene (cAAC) triggers rearrangement of the silyl(aryl) amido ligand –N(SiMe 3 )Dipp (Dipp = 2,6‐diisopropylphenyl) in the coordination sphere of titanium(III) to afford a novel zwitterionic titanium imido complex with a TiCH 2 SiMe 2 [cAAC] linkage. Reduction of this species produces a new DippN=Ti imido complex containing a cAAC‐centered radical species, characterized by single‐crystal diffraction analysis and electron paramagnetic resonance spectroscopy.

Ye, Qing↗

Valence-to-core X-ray emission spectroscopy of titanium compounds using energy dispersive detectors

X-ray emission spectroscopy (XES) of transition metal compounds is a powerful tool for investigating the spin and oxidation state of the metal centers. Valence-to-core (vtc) XES is of special interest, as it contains information on the ligand nature, hybridization, and protonation. To date, most vtc-XES studies have been performed with high-brightness sources, such as synchrotrons, due to the weak fluorescence lines from vtc transitions. Here, we present a systematic study of the vtc-XES for different titanium compounds in a laboratory setting using an X-ray tube source and energy dispersive microcalorimeter sensors. With a full-width at half-maximum energy resolution of approximately 4 eV at the Ti Kβ lines, we measure the XES features of different titanium compounds and compare our results for the vtc line shapes and energies to previously published and newly acquired synchrotron data as well as to new theoretical calculations. Finally, we report simulations of the feasibility of performing time-resolved vtc-XES studies with a laser-based plasma source in a laboratory setting. Our results show that microcalorimeter sensors can already perform high-quality measurements of vtc-XES features in a laboratory setting under static conditions and that dynamic measurements will be possible in the future after reasonable technological developments.

36 MATERIALS SCIENCE↗

Evaluation of two extraction chromatography resins for scandium and titanium separation for medical isotope production

Scandium-47 ( 47 Sc) can be used in nuclear medicine as a therapeutic-diagnostic, or "theragnostic," radioactive medical isotope for cancer detection and treatment. The 47 Sc isotope can be produced through the photonuclear reaction 48 Ti(γ,p) 47 Sc by irradiating enriched 48 Ti target material. The enriched target material necessary for production is costly; 48 TiO 2 costs ~ $\$$1550/g, and targets can be > 50 g ($\$$77,500) to produce medically relevant amounts of 47 Sc. In order to keep costs low, a highly efficient separation of scandium from bulk titanium is desired, along with efficient methods for recycling the target material. Here this research is focused on evaluating efficient methods for the separation of scandium from bulk quantities of titanium using commercially available diglycolamide-based and hydroxamate-based extraction chromatography resins (DGA resin and ZR resin, respectively). The sorption of 47 Sc and Ti on these resins were investigated at varying concentrations of HNO 3 , HCl, H 2 SO 4 , and HF to explore how they might be used in a large-scale production/processing setting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗